From: Krzysztof Kozlowski <k.kozlowski@samsung.com> To: Kukjin Kim <kgene@kernel.org>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Subject: [PATCH 1/3] ARM: dts: exynos4412-trats2: Add Maxim 77693 fuel gauge node Date: Thu, 15 Jan 2015 09:41:33 +0100 [thread overview] Message-ID: <1421311295-18960-2-git-send-email-k.kozlowski@samsung.com> (raw) In-Reply-To: <1421311295-18960-1-git-send-email-k.kozlowski@samsung.com> Add node for fuel gauge present in Maxim 77693 PMIC. This allows control over battery charging state on Trats2 board. The fuel gauge is compatible with max17042 battery driver (Maxim 17042/17047/17050). Although datasheet rev 2.2 for MAX77693 describes fuel gauge as Maxim 17042-like, the chip on Trats2 board identifies itself as Maxim 17047-like. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> --- arch/arm/boot/dts/exynos4412-trats2.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 29231b452643..595ad4ba6977 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -15,6 +15,7 @@ /dts-v1/; #include "exynos4412.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "Samsung Trats 2 based on Exynos4412"; @@ -24,6 +25,7 @@ i2c9 = &i2c_ak8975; i2c10 = &i2c_cm36651; i2c11 = &i2c_max77693; + i2c12 = &i2c_max77693_fuel; }; memory { @@ -552,6 +554,22 @@ }; }; + i2c_max77693_fuel: i2c-gpio-3 { + compatible = "i2c-gpio"; + gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + max77693-fuel-gauge@36 { + compatible = "maxim,max17047"; + interrupt-parent = <&gpx2>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + reg = <0x36>; + }; + }; + mmc@12550000 { num-slots = <1>; broken-cd; -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: k.kozlowski@samsung.com (Krzysztof Kozlowski) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 1/3] ARM: dts: exynos4412-trats2: Add Maxim 77693 fuel gauge node Date: Thu, 15 Jan 2015 09:41:33 +0100 [thread overview] Message-ID: <1421311295-18960-2-git-send-email-k.kozlowski@samsung.com> (raw) In-Reply-To: <1421311295-18960-1-git-send-email-k.kozlowski@samsung.com> Add node for fuel gauge present in Maxim 77693 PMIC. This allows control over battery charging state on Trats2 board. The fuel gauge is compatible with max17042 battery driver (Maxim 17042/17047/17050). Although datasheet rev 2.2 for MAX77693 describes fuel gauge as Maxim 17042-like, the chip on Trats2 board identifies itself as Maxim 17047-like. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> --- arch/arm/boot/dts/exynos4412-trats2.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 29231b452643..595ad4ba6977 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -15,6 +15,7 @@ /dts-v1/; #include "exynos4412.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "Samsung Trats 2 based on Exynos4412"; @@ -24,6 +25,7 @@ i2c9 = &i2c_ak8975; i2c10 = &i2c_cm36651; i2c11 = &i2c_max77693; + i2c12 = &i2c_max77693_fuel; }; memory { @@ -552,6 +554,22 @@ }; }; + i2c_max77693_fuel: i2c-gpio-3 { + compatible = "i2c-gpio"; + gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + max77693-fuel-gauge at 36 { + compatible = "maxim,max17047"; + interrupt-parent = <&gpx2>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + reg = <0x36>; + }; + }; + mmc at 12550000 { num-slots = <1>; broken-cd; -- 1.9.1
next prev parent reply other threads:[~2015-01-15 8:41 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-01-15 8:41 [PATCH 0/3] ARM: dts: Regulator changes and fuel gauge for exynos4412-trats2 Krzysztof Kozlowski 2015-01-15 8:41 ` Krzysztof Kozlowski 2015-01-15 8:41 ` Krzysztof Kozlowski [this message] 2015-01-15 8:41 ` [PATCH 1/3] ARM: dts: exynos4412-trats2: Add Maxim 77693 fuel gauge node Krzysztof Kozlowski 2015-01-15 8:41 ` [PATCH 2/3] ARM: dts: exynos4412-trats2: Add suspend configuration for max77686 regulators Krzysztof Kozlowski 2015-01-15 8:41 ` Krzysztof Kozlowski 2015-01-15 8:41 ` [PATCH 3/3] ARM: dts: exynos4412-trats2: Switch max77686 regulators to GPIO control Krzysztof Kozlowski 2015-01-15 8:41 ` Krzysztof Kozlowski 2015-02-03 3:26 ` [PATCH 0/3] ARM: dts: Regulator changes and fuel gauge for exynos4412-trats2 Kukjin Kim 2015-02-03 3:26 ` Kukjin Kim
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1421311295-18960-2-git-send-email-k.kozlowski@samsung.com \ --to=k.kozlowski@samsung.com \ --cc=devicetree@vger.kernel.org \ --cc=kgene@kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-samsung-soc@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.