All of lore.kernel.org
 help / color / mirror / Atom feed
From: wens@csie.org (Chen-Yu Tsai)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 3/9] ARM: dts: sun9i: Add clock-indices property for bus gate clocks
Date: Sat, 17 Jan 2015 13:19:28 +0800	[thread overview]
Message-ID: <1421471974-32719-4-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1421471974-32719-1-git-send-email-wens@csie.org>

of_clk_get_parent_name() uses the clock-indices property to resolve
clock phandle arguments in case that the argument index does not
match the clock-output-names sequence.

This is the case on sunxi, where we use the actual bit index as the
argument to the phandle. Add the clock-indices property so that
of_clk_get_parent_name() resolves the names correctly.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm/boot/dts/sun9i-a80.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 267ed149a5fa..820b4c5995f3 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -260,6 +260,9 @@
 			compatible = "allwinner,sun9i-a80-ahb0-gates-clk";
 			reg = <0x06000580 0x4>;
 			clocks = <&ahb0>;
+			clock-indices = <0>, <1>, <3>, <5>, <8>, <12>, <13>,
+					<14>, <15>, <16>, <18>, <20>, <21>,
+					<22>, <23>;
 			clock-output-names = "ahb0_fd", "ahb0_ve", "ahb0_gpu",
 					"ahb0_ss", "ahb0_sd", "ahb0_nand1",
 					"ahb0_nand0", "ahb0_sdram",
@@ -273,6 +276,7 @@
 			compatible = "allwinner,sun9i-a80-ahb1-gates-clk";
 			reg = <0x06000584 0x4>;
 			clocks = <&ahb1>;
+			clock-indices = <0>, <1>, <17>, <21>, <22>, <23>, <24>;
 			clock-output-names = "ahb1_usbotg", "ahb1_usbhci",
 					"ahb1_gmac", "ahb1_msgbox",
 					"ahb1_spinlock", "ahb1_hstimer",
@@ -284,6 +288,8 @@
 			compatible = "allwinner,sun9i-a80-ahb2-gates-clk";
 			reg = <0x06000588 0x4>;
 			clocks = <&ahb2>;
+			clock-indices = <0>, <1>, <2>, <4>, <5>, <7>, <8>,
+					<11>;
 			clock-output-names = "ahb2_lcd0", "ahb2_lcd1",
 					"ahb2_edp", "ahb2_csi", "ahb2_hdmi",
 					"ahb2_de", "ahb2_mp", "ahb2_mipi_dsi";
@@ -294,6 +300,8 @@
 			compatible = "allwinner,sun9i-a80-apb0-gates-clk";
 			reg = <0x06000590 0x4>;
 			clocks = <&apb0>;
+			clock-indices = <1>, <5>, <11>, <12>, <13>, <15>,
+					<17>, <18>, <19>;
 			clock-output-names = "apb0_spdif", "apb0_pio",
 					"apb0_ac97", "apb0_i2s0", "apb0_i2s1",
 					"apb0_lradc", "apb0_gpadc", "apb0_twd",
@@ -305,6 +313,8 @@
 			compatible = "allwinner,sun9i-a80-apb1-gates-clk";
 			reg = <0x06000594 0x4>;
 			clocks = <&apb1>;
+			clock-indices = <0>, <1>, <2>, <3>, <4>,
+					<16>, <17>, <18>, <19>, <20>, <21>;
 			clock-output-names = "apb1_i2c0", "apb1_i2c1",
 					"apb1_i2c2", "apb1_i2c3", "apb1_i2c4",
 					"apb1_uart0", "apb1_uart1",
-- 
2.1.4

  parent reply	other threads:[~2015-01-17  5:19 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-17  5:19 [PATCH v4 0/9] ARM: sun9i: Enable MMC support on Allwinner A80 Chen-Yu Tsai
2015-01-17  5:19 ` [PATCH v4 1/9] clk: sunxi: Add mod0 and mmc module clock support for A80 Chen-Yu Tsai
2015-01-19 21:49   ` Maxime Ripard
2015-01-17  5:19 ` [PATCH v4 2/9] clk: sunxi: Add driver for A80 MMC config clocks/resets Chen-Yu Tsai
2015-01-19 21:57   ` Maxime Ripard
2015-01-20  2:13     ` Chen-Yu Tsai
2015-01-20  8:16       ` Maxime Ripard
2015-01-17  5:19 ` Chen-Yu Tsai [this message]
2015-01-19 21:59   ` [PATCH v4 3/9] ARM: dts: sun9i: Add clock-indices property for bus gate clocks Maxime Ripard
2015-01-20  1:50     ` Chen-Yu Tsai
2015-01-17  5:19 ` [PATCH v4 4/9] ARM: dts: sun9i: Add mmc config clock nodes Chen-Yu Tsai
2015-01-19 22:02   ` Maxime Ripard
2015-01-17  5:19 ` [PATCH v4 5/9] ARM: dts: sun9i: Add mmc controller nodes to the A80 dtsi Chen-Yu Tsai
2015-01-19 22:05   ` Maxime Ripard
2015-01-17  5:19 ` [PATCH v4 6/9] ARM: dts: sun9i: Convert a80 optimus board dts to label referencing Chen-Yu Tsai
2015-01-19 22:05   ` Maxime Ripard
2015-01-17  5:19 ` [PATCH v4 7/9] ARM: dts: sun9i: Enable mmc0 on A80 Optimus Board Chen-Yu Tsai
2015-01-19 22:06   ` Maxime Ripard
2015-01-17  5:19 ` [PATCH v4 8/9] ARM: dts: sun9i: Add 8 bit mmc pinmux setting for mmc2 Chen-Yu Tsai
2015-01-19 22:06   ` Maxime Ripard
2015-01-17  5:19 ` [PATCH v4 9/9] ARM: dts: sun9i: Enable mmc2 on A80 Optimus Board Chen-Yu Tsai
2015-01-19 22:07   ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1421471974-32719-4-git-send-email-wens@csie.org \
    --to=wens@csie.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.