From: Michal Kazior <michal.kazior@tieto.com> To: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org, Janusz Dziedzic <janusz.dziedzic@tieto.com>, Michal Kazior <michal.kazior@tieto.com> Subject: [PATCH 1/2] ath10k: implement sta keepalive command Date: Tue, 20 Jan 2015 11:23:59 +0100 [thread overview] Message-ID: <1421749440-10457-1-git-send-email-michal.kazior@tieto.com> (raw) From: Janusz Dziedzic <janusz.dziedzic@tieto.com> New wmi-tlv firmware for qca6174 has STA keepalive service available. The service can provide automatic idle connection polling via NullFunc frames to AP when acting as a client. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> --- drivers/net/wireless/ath/ath10k/wmi-ops.h | 20 ++++++++++++++ drivers/net/wireless/ath/ath10k/wmi-tlv.c | 45 +++++++++++++++++++++++++++++++ drivers/net/wireless/ath/ath10k/wmi-tlv.h | 7 +++++ drivers/net/wireless/ath/ath10k/wmi.h | 10 +++++++ 4 files changed, 82 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h index 0dd49a7..d430f92 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-ops.h +++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h @@ -137,6 +137,8 @@ struct wmi_ops { struct sk_buff *bcn); struct sk_buff *(*gen_p2p_go_bcn_ie)(struct ath10k *ar, u32 vdev_id, const u8 *p2p_ie); + struct sk_buff *(*gen_sta_keepalive)(struct ath10k *ar, + const struct wmi_sta_keepalive_arg *arg); }; int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id); @@ -992,4 +994,22 @@ ath10k_wmi_p2p_go_bcn_ie(struct ath10k *ar, u32 vdev_id, const u8 *p2p_ie) return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->p2p_go_set_beacon_ie); } +static inline int +ath10k_wmi_sta_keepalive(struct ath10k *ar, + const struct wmi_sta_keepalive_arg *arg) +{ + struct sk_buff *skb; + u32 cmd_id; + + if (!ar->wmi.ops->gen_sta_keepalive) + return -EOPNOTSUPP; + + skb = ar->wmi.ops->gen_sta_keepalive(ar, arg); + if (IS_ERR(skb)) + return PTR_ERR(skb); + + cmd_id = ar->wmi.cmd->sta_keepalive_cmd; + return ath10k_wmi_cmd_send(ar, skb, cmd_id); +} + #endif diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c index 6f34fc7..3f1a022 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c +++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c @@ -1407,6 +1407,50 @@ ath10k_wmi_tlv_op_gen_vdev_install_key(struct ath10k *ar, } static struct sk_buff * +ath10k_wmi_tlv_op_gen_sta_keepalive(struct ath10k *ar, + const struct wmi_sta_keepalive_arg *arg) +{ + struct wmi_tlv_sta_keepalive_cmd *cmd; + struct wmi_sta_keepalive_arp_resp *arp; + struct sk_buff *skb; + struct wmi_tlv *tlv; + void *ptr; + size_t len; + + len = sizeof(*tlv) + sizeof(*cmd) + + sizeof(*tlv) + sizeof(*arp); + skb = ath10k_wmi_alloc_skb(ar, len); + if (!skb) + return ERR_PTR(-ENOMEM); + + ptr = (void *)skb->data; + tlv = ptr; + tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_STA_KEEPALIVE_CMD); + tlv->len = __cpu_to_le16(sizeof(*cmd)); + cmd = (void *)tlv->value; + cmd->vdev_id = __cpu_to_le32(arg->vdev_id); + cmd->enabled = __cpu_to_le32(arg->enabled); + cmd->method = __cpu_to_le32(arg->method); + cmd->interval = __cpu_to_le32(arg->interval); + + ptr += sizeof(*tlv); + ptr += sizeof(*cmd); + + tlv = ptr; + tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_STA_KEEPALVE_ARP_RESPONSE); + tlv->len = __cpu_to_le16(sizeof(*arp)); + arp = (void *)tlv->value; + + arp->src_ip4_addr = arg->src_ip4_addr; + arp->dest_ip4_addr = arg->dest_ip4_addr; + ether_addr_copy(arp->dest_mac_addr.addr, arg->dest_mac_addr); + + ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv sta keepalive vdev %d enabled %d method %d inverval %d\n", + arg->vdev_id, arg->enabled, arg->method, arg->interval); + return skb; +} + +static struct sk_buff * ath10k_wmi_tlv_op_gen_peer_create(struct ath10k *ar, u32 vdev_id, const u8 peer_addr[ETH_ALEN]) { @@ -2417,6 +2461,7 @@ static const struct wmi_ops wmi_tlv_ops = { .gen_bcn_tmpl = ath10k_wmi_tlv_op_gen_bcn_tmpl, .gen_prb_tmpl = ath10k_wmi_tlv_op_gen_prb_tmpl, .gen_p2p_go_bcn_ie = ath10k_wmi_tlv_op_gen_p2p_go_bcn_ie, + .gen_sta_keepalive = ath10k_wmi_tlv_op_gen_sta_keepalive, }; /************/ diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h b/drivers/net/wireless/ath/ath10k/wmi-tlv.h index eb02290..ac9fb85 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h +++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h @@ -1409,6 +1409,13 @@ struct wmi_tlv_p2p_go_bcn_ie { __le32 ie_len; } __packed; +struct wmi_tlv_sta_keepalive_cmd { + __le32 vdev_id; + __le32 enabled; + __le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */ + __le32 interval; /* in seconds */ +} __packed; + void ath10k_wmi_tlv_attach(struct ath10k *ar); #endif diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index bd7f29a..99f091d 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -4596,6 +4596,16 @@ struct wmi_sta_keepalive_cmd { struct wmi_sta_keepalive_arp_resp arp_resp; } __packed; +struct wmi_sta_keepalive_arg { + u32 vdev_id; + u32 enabled; + u32 method; + u32 interval; + __be32 src_ip4_addr; + __be32 dest_ip4_addr; + const u8 dest_mac_addr[ETH_ALEN]; +}; + enum wmi_force_fw_hang_type { WMI_FORCE_FW_HANG_ASSERT = 1, WMI_FORCE_FW_HANG_NO_DETECT, -- 1.8.5.3
WARNING: multiple messages have this Message-ID (diff)
From: Michal Kazior <michal.kazior@tieto.com> To: ath10k@lists.infradead.org Cc: Janusz Dziedzic <janusz.dziedzic@tieto.com>, linux-wireless@vger.kernel.org, Michal Kazior <michal.kazior@tieto.com> Subject: [PATCH 1/2] ath10k: implement sta keepalive command Date: Tue, 20 Jan 2015 11:23:59 +0100 [thread overview] Message-ID: <1421749440-10457-1-git-send-email-michal.kazior@tieto.com> (raw) From: Janusz Dziedzic <janusz.dziedzic@tieto.com> New wmi-tlv firmware for qca6174 has STA keepalive service available. The service can provide automatic idle connection polling via NullFunc frames to AP when acting as a client. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> --- drivers/net/wireless/ath/ath10k/wmi-ops.h | 20 ++++++++++++++ drivers/net/wireless/ath/ath10k/wmi-tlv.c | 45 +++++++++++++++++++++++++++++++ drivers/net/wireless/ath/ath10k/wmi-tlv.h | 7 +++++ drivers/net/wireless/ath/ath10k/wmi.h | 10 +++++++ 4 files changed, 82 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h index 0dd49a7..d430f92 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-ops.h +++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h @@ -137,6 +137,8 @@ struct wmi_ops { struct sk_buff *bcn); struct sk_buff *(*gen_p2p_go_bcn_ie)(struct ath10k *ar, u32 vdev_id, const u8 *p2p_ie); + struct sk_buff *(*gen_sta_keepalive)(struct ath10k *ar, + const struct wmi_sta_keepalive_arg *arg); }; int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id); @@ -992,4 +994,22 @@ ath10k_wmi_p2p_go_bcn_ie(struct ath10k *ar, u32 vdev_id, const u8 *p2p_ie) return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->p2p_go_set_beacon_ie); } +static inline int +ath10k_wmi_sta_keepalive(struct ath10k *ar, + const struct wmi_sta_keepalive_arg *arg) +{ + struct sk_buff *skb; + u32 cmd_id; + + if (!ar->wmi.ops->gen_sta_keepalive) + return -EOPNOTSUPP; + + skb = ar->wmi.ops->gen_sta_keepalive(ar, arg); + if (IS_ERR(skb)) + return PTR_ERR(skb); + + cmd_id = ar->wmi.cmd->sta_keepalive_cmd; + return ath10k_wmi_cmd_send(ar, skb, cmd_id); +} + #endif diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c index 6f34fc7..3f1a022 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c +++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c @@ -1407,6 +1407,50 @@ ath10k_wmi_tlv_op_gen_vdev_install_key(struct ath10k *ar, } static struct sk_buff * +ath10k_wmi_tlv_op_gen_sta_keepalive(struct ath10k *ar, + const struct wmi_sta_keepalive_arg *arg) +{ + struct wmi_tlv_sta_keepalive_cmd *cmd; + struct wmi_sta_keepalive_arp_resp *arp; + struct sk_buff *skb; + struct wmi_tlv *tlv; + void *ptr; + size_t len; + + len = sizeof(*tlv) + sizeof(*cmd) + + sizeof(*tlv) + sizeof(*arp); + skb = ath10k_wmi_alloc_skb(ar, len); + if (!skb) + return ERR_PTR(-ENOMEM); + + ptr = (void *)skb->data; + tlv = ptr; + tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_STA_KEEPALIVE_CMD); + tlv->len = __cpu_to_le16(sizeof(*cmd)); + cmd = (void *)tlv->value; + cmd->vdev_id = __cpu_to_le32(arg->vdev_id); + cmd->enabled = __cpu_to_le32(arg->enabled); + cmd->method = __cpu_to_le32(arg->method); + cmd->interval = __cpu_to_le32(arg->interval); + + ptr += sizeof(*tlv); + ptr += sizeof(*cmd); + + tlv = ptr; + tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_STA_KEEPALVE_ARP_RESPONSE); + tlv->len = __cpu_to_le16(sizeof(*arp)); + arp = (void *)tlv->value; + + arp->src_ip4_addr = arg->src_ip4_addr; + arp->dest_ip4_addr = arg->dest_ip4_addr; + ether_addr_copy(arp->dest_mac_addr.addr, arg->dest_mac_addr); + + ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv sta keepalive vdev %d enabled %d method %d inverval %d\n", + arg->vdev_id, arg->enabled, arg->method, arg->interval); + return skb; +} + +static struct sk_buff * ath10k_wmi_tlv_op_gen_peer_create(struct ath10k *ar, u32 vdev_id, const u8 peer_addr[ETH_ALEN]) { @@ -2417,6 +2461,7 @@ static const struct wmi_ops wmi_tlv_ops = { .gen_bcn_tmpl = ath10k_wmi_tlv_op_gen_bcn_tmpl, .gen_prb_tmpl = ath10k_wmi_tlv_op_gen_prb_tmpl, .gen_p2p_go_bcn_ie = ath10k_wmi_tlv_op_gen_p2p_go_bcn_ie, + .gen_sta_keepalive = ath10k_wmi_tlv_op_gen_sta_keepalive, }; /************/ diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h b/drivers/net/wireless/ath/ath10k/wmi-tlv.h index eb02290..ac9fb85 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h +++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h @@ -1409,6 +1409,13 @@ struct wmi_tlv_p2p_go_bcn_ie { __le32 ie_len; } __packed; +struct wmi_tlv_sta_keepalive_cmd { + __le32 vdev_id; + __le32 enabled; + __le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */ + __le32 interval; /* in seconds */ +} __packed; + void ath10k_wmi_tlv_attach(struct ath10k *ar); #endif diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index bd7f29a..99f091d 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -4596,6 +4596,16 @@ struct wmi_sta_keepalive_cmd { struct wmi_sta_keepalive_arp_resp arp_resp; } __packed; +struct wmi_sta_keepalive_arg { + u32 vdev_id; + u32 enabled; + u32 method; + u32 interval; + __be32 src_ip4_addr; + __be32 dest_ip4_addr; + const u8 dest_mac_addr[ETH_ALEN]; +}; + enum wmi_force_fw_hang_type { WMI_FORCE_FW_HANG_ASSERT = 1, WMI_FORCE_FW_HANG_NO_DETECT, -- 1.8.5.3 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
next reply other threads:[~2015-01-20 10:24 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-01-20 10:23 Michal Kazior [this message] 2015-01-20 10:23 ` [PATCH 1/2] ath10k: implement sta keepalive command Michal Kazior 2015-01-20 10:24 ` [PATCH 2/2] ath10k: disable sta keepalive Michal Kazior 2015-01-20 10:24 ` Michal Kazior 2015-01-28 8:20 ` [PATCH 1/2] ath10k: implement sta keepalive command Kalle Valo 2015-01-28 8:20 ` Kalle Valo 2015-01-28 8:49 ` Michal Kazior 2015-01-28 8:49 ` Michal Kazior 2015-01-29 10:16 ` Kalle Valo 2015-01-29 10:16 ` Kalle Valo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1421749440-10457-1-git-send-email-michal.kazior@tieto.com \ --to=michal.kazior@tieto.com \ --cc=ath10k@lists.infradead.org \ --cc=janusz.dziedzic@tieto.com \ --cc=linux-wireless@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.