All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chen-Yu Tsai <wens@csie.org>
To: Maxime Ripard <maxime.ripard@free-electrons.com>,
	Mike Turquette <mturquette@linaro.org>,
	Emilio Lopez <emilio@elopez.com.ar>,
	Rob Herring <robh+dt@kernel.org>,
	Grant Likely <grant.likely@linaro.org>,
	Kishon Vijay Abraham I <kishon@ti.com>
Cc: Chen-Yu Tsai <wens@csie.org>,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com
Subject: [PATCH v2 7/9] ARM: dts: sun9i: Enable USB support on A80 Optimus board
Date: Sun, 25 Jan 2015 20:22:08 +0800	[thread overview]
Message-ID: <1422188530-1794-8-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1422188530-1794-1-git-send-email-wens@csie.org>

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm/boot/dts/sun9i-a80-optimus.dts | 60 +++++++++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index c4de9cb9a5f6..16d30bb3a872 100644
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -83,6 +83,18 @@
 	};
 };
 
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
 &i2c3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c3_pins_a>;
@@ -94,6 +106,14 @@
 	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 };
 
+&ohci0 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
 &pio {
 	led_pins_optimus: led-pins@0 {
 		allwinner,pins = "PH0", "PH1";
@@ -108,6 +128,20 @@
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
+
+	usb1_vbus_pin_optimus: usb1_vbus_pin@1 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb3_vbus_pin_optimus: usb3_vbus_pin@1 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
 };
 
 &mmc0 {
@@ -129,6 +163,18 @@
 	status = "okay";
 };
 
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_optimus>;
+	gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	status = "okay";
+};
+
+&reg_usb3_vbus {
+	pinctrl-0 = <&usb3_vbus_pin_optimus>;
+	gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
@@ -145,3 +191,17 @@
 	/* Enable internal pull-up */
 	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 };
+
+&usbphy1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
+
+&usbphy3 {
+	vbus-supply = <&reg_usb3_vbus>;
+	status = "okay";
+};
-- 
2.1.4


WARNING: multiple messages have this Message-ID (diff)
From: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
To: Maxime Ripard
	<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
	Mike Turquette
	<mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	Emilio Lopez <emilio-0Z03zUJReD5OxF6Tv1QG9Q@public.gmane.org>,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Grant Likely
	<grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
Cc: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Subject: [PATCH v2 7/9] ARM: dts: sun9i: Enable USB support on A80 Optimus board
Date: Sun, 25 Jan 2015 20:22:08 +0800	[thread overview]
Message-ID: <1422188530-1794-8-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1422188530-1794-1-git-send-email-wens-jdAy2FN1RRM@public.gmane.org>

Signed-off-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
---
 arch/arm/boot/dts/sun9i-a80-optimus.dts | 60 +++++++++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index c4de9cb9a5f6..16d30bb3a872 100644
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -83,6 +83,18 @@
 	};
 };
 
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
 &i2c3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c3_pins_a>;
@@ -94,6 +106,14 @@
 	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 };
 
+&ohci0 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
 &pio {
 	led_pins_optimus: led-pins@0 {
 		allwinner,pins = "PH0", "PH1";
@@ -108,6 +128,20 @@
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
+
+	usb1_vbus_pin_optimus: usb1_vbus_pin@1 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb3_vbus_pin_optimus: usb3_vbus_pin@1 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
 };
 
 &mmc0 {
@@ -129,6 +163,18 @@
 	status = "okay";
 };
 
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_optimus>;
+	gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	status = "okay";
+};
+
+&reg_usb3_vbus {
+	pinctrl-0 = <&usb3_vbus_pin_optimus>;
+	gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
@@ -145,3 +191,17 @@
 	/* Enable internal pull-up */
 	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 };
+
+&usbphy1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
+
+&usbphy3 {
+	vbus-supply = <&reg_usb3_vbus>;
+	status = "okay";
+};
-- 
2.1.4

WARNING: multiple messages have this Message-ID (diff)
From: wens@csie.org (Chen-Yu Tsai)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 7/9] ARM: dts: sun9i: Enable USB support on A80 Optimus board
Date: Sun, 25 Jan 2015 20:22:08 +0800	[thread overview]
Message-ID: <1422188530-1794-8-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1422188530-1794-1-git-send-email-wens@csie.org>

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm/boot/dts/sun9i-a80-optimus.dts | 60 +++++++++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index c4de9cb9a5f6..16d30bb3a872 100644
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -83,6 +83,18 @@
 	};
 };
 
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
 &i2c3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c3_pins_a>;
@@ -94,6 +106,14 @@
 	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 };
 
+&ohci0 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
 &pio {
 	led_pins_optimus: led-pins at 0 {
 		allwinner,pins = "PH0", "PH1";
@@ -108,6 +128,20 @@
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
+
+	usb1_vbus_pin_optimus: usb1_vbus_pin at 1 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb3_vbus_pin_optimus: usb3_vbus_pin at 1 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
 };
 
 &mmc0 {
@@ -129,6 +163,18 @@
 	status = "okay";
 };
 
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_optimus>;
+	gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	status = "okay";
+};
+
+&reg_usb3_vbus {
+	pinctrl-0 = <&usb3_vbus_pin_optimus>;
+	gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
@@ -145,3 +191,17 @@
 	/* Enable internal pull-up */
 	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 };
+
+&usbphy1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
+
+&usbphy3 {
+	vbus-supply = <&reg_usb3_vbus>;
+	status = "okay";
+};
-- 
2.1.4

  parent reply	other threads:[~2015-01-25 12:22 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-25 12:22 [PATCH v2 0/9] ARM: sun9i: Add USB host controller support for A80 Chen-Yu Tsai
2015-01-25 12:22 ` Chen-Yu Tsai
2015-01-25 12:22 ` Chen-Yu Tsai
2015-01-25 12:22 ` [PATCH v2 1/9] clk: sunxi: Add support for sun9i a80 usb clocks and resets Chen-Yu Tsai
2015-01-25 12:22   ` Chen-Yu Tsai
2015-01-25 12:22   ` Chen-Yu Tsai
2015-01-25 16:02   ` Maxime Ripard
2015-01-25 16:02     ` Maxime Ripard
2015-01-25 16:02     ` Maxime Ripard
2015-01-26  9:25     ` Chen-Yu Tsai
2015-01-26  9:25       ` Chen-Yu Tsai
2015-01-26  9:25       ` Chen-Yu Tsai
2015-01-26 13:37       ` Maxime Ripard
2015-01-26 13:37         ` Maxime Ripard
2015-01-26 13:37         ` Maxime Ripard
2015-01-25 12:22 ` [PATCH v2 2/9] ARM: dts: sun9i: Add usb clock nodes to a80 dtsi Chen-Yu Tsai
2015-01-25 12:22   ` Chen-Yu Tsai
2015-01-25 12:22   ` Chen-Yu Tsai
2015-01-25 12:22 ` [PATCH v2 3/9] phy: Add driver to support individual USB PHYs on sun9i Chen-Yu Tsai
2015-01-25 12:22   ` Chen-Yu Tsai
2015-01-25 12:22   ` Chen-Yu Tsai
2015-01-25 12:22 ` [PATCH v2 4/9] ARM: dts: sun9i: Add usb phy nodes to a80 dtsi Chen-Yu Tsai
2015-01-25 12:22   ` Chen-Yu Tsai
2015-01-25 12:22   ` Chen-Yu Tsai
2015-01-25 12:22 ` [PATCH v2 5/9] ARM: dts: sun9i: Add USB host controller " Chen-Yu Tsai
2015-01-25 12:22   ` Chen-Yu Tsai
2015-01-25 12:22   ` Chen-Yu Tsai
2015-01-25 12:22 ` [PATCH v2 6/9] ARM: dts: sunxi: Add usb3_vbus regulator to common regulators dtsi Chen-Yu Tsai
2015-01-25 12:22   ` Chen-Yu Tsai
2015-01-25 12:22   ` Chen-Yu Tsai
2015-01-25 16:06   ` Maxime Ripard
2015-01-25 16:06     ` Maxime Ripard
2015-01-25 16:06     ` Maxime Ripard
2015-01-25 12:22 ` Chen-Yu Tsai [this message]
2015-01-25 12:22   ` [PATCH v2 7/9] ARM: dts: sun9i: Enable USB support on A80 Optimus board Chen-Yu Tsai
2015-01-25 12:22   ` Chen-Yu Tsai
2015-01-25 12:22 ` [PATCH v2 8/9] ARM: sunxi_defconfig: Enable CONFIG_PHY_SUN9I_USB Chen-Yu Tsai
2015-01-25 12:22   ` Chen-Yu Tsai
2015-01-25 12:22   ` Chen-Yu Tsai
2015-01-25 12:22 ` [PATCH v2 9/9] ARM: multi_v7_defconfig: " Chen-Yu Tsai
2015-01-25 12:22   ` Chen-Yu Tsai
2015-01-25 12:22   ` Chen-Yu Tsai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1422188530-1794-8-git-send-email-wens@csie.org \
    --to=wens@csie.org \
    --cc=devicetree@vger.kernel.org \
    --cc=emilio@elopez.com.ar \
    --cc=grant.likely@linaro.org \
    --cc=kishon@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=maxime.ripard@free-electrons.com \
    --cc=mturquette@linaro.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.