All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chen-Yu Tsai <wens@csie.org>
To: Maxime Ripard <maxime.ripard@free-electrons.com>,
	Mike Turquette <mturquette@linaro.org>,
	Emilio Lopez <emilio@elopez.com.ar>,
	Rob Herring <robh+dt@kernel.org>,
	Grant Likely <grant.likely@linaro.org>,
	Kishon Vijay Abraham I <kishon@ti.com>
Cc: Chen-Yu Tsai <wens@csie.org>,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com
Subject: [PATCH v3 05/10] ARM: dts: sun9i: Add usb phy nodes to a80 dtsi
Date: Wed, 28 Jan 2015 03:54:10 +0800	[thread overview]
Message-ID: <1422388455-25923-6-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1422388455-25923-1-git-send-email-wens@csie.org>

On sun9i, there are 3 independent usb phys for EHCI/OHCI.
Add device nodes for them.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm/boot/dts/sun9i-a80.dtsi | 37 +++++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 679cf2878800..d7ebd9390b01 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -355,6 +355,43 @@
 		 */
 		ranges = <0 0 0 0x20000000>;
 
+		usbphy1: phy@00a00800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a00800 0x4>;
+			clocks = <&usb_phy_clk 1>;
+			clock-names = "phy";
+			resets = <&usb_phy_clk 17>;
+			reset-names = "phy";
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+
+		usbphy2: phy@00a01800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a01800 0x4>;
+			clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>,
+				 <&usb_phy_clk 3>;
+			clock-names = "hsic_480M", "hsic_12M", "phy";
+			resets = <&usb_phy_clk 18>, <&usb_phy_clk 19>;
+			reset-names = "hsic", "phy";
+			status = "disabled";
+			#phy-cells = <0>;
+			/* usb1 is always used with HSIC */
+			phy_type = "hsic";
+		};
+
+		usbphy3: phy@00a02800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a02800 0x4>;
+			clocks = <&usb_phy_clk 4>, <&usb_phy_clk 10>,
+				 <&usb_phy_clk 5>;
+			clock-names = "hsic_480M", "hsic_12M", "phy";
+			resets = <&usb_phy_clk 20>, <&usb_phy_clk 21>;
+			reset-names = "hsic", "phy";
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+
 		mmc0: mmc@01c0f000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c0f000 0x1000>;
-- 
2.1.4


WARNING: multiple messages have this Message-ID (diff)
From: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
To: Maxime Ripard
	<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
	Mike Turquette
	<mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	Emilio Lopez <emilio-0Z03zUJReD5OxF6Tv1QG9Q@public.gmane.org>,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Grant Likely
	<grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
Cc: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Subject: [PATCH v3 05/10] ARM: dts: sun9i: Add usb phy nodes to a80 dtsi
Date: Wed, 28 Jan 2015 03:54:10 +0800	[thread overview]
Message-ID: <1422388455-25923-6-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1422388455-25923-1-git-send-email-wens-jdAy2FN1RRM@public.gmane.org>

On sun9i, there are 3 independent usb phys for EHCI/OHCI.
Add device nodes for them.

Signed-off-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
---
 arch/arm/boot/dts/sun9i-a80.dtsi | 37 +++++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 679cf2878800..d7ebd9390b01 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -355,6 +355,43 @@
 		 */
 		ranges = <0 0 0 0x20000000>;
 
+		usbphy1: phy@00a00800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a00800 0x4>;
+			clocks = <&usb_phy_clk 1>;
+			clock-names = "phy";
+			resets = <&usb_phy_clk 17>;
+			reset-names = "phy";
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+
+		usbphy2: phy@00a01800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a01800 0x4>;
+			clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>,
+				 <&usb_phy_clk 3>;
+			clock-names = "hsic_480M", "hsic_12M", "phy";
+			resets = <&usb_phy_clk 18>, <&usb_phy_clk 19>;
+			reset-names = "hsic", "phy";
+			status = "disabled";
+			#phy-cells = <0>;
+			/* usb1 is always used with HSIC */
+			phy_type = "hsic";
+		};
+
+		usbphy3: phy@00a02800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a02800 0x4>;
+			clocks = <&usb_phy_clk 4>, <&usb_phy_clk 10>,
+				 <&usb_phy_clk 5>;
+			clock-names = "hsic_480M", "hsic_12M", "phy";
+			resets = <&usb_phy_clk 20>, <&usb_phy_clk 21>;
+			reset-names = "hsic", "phy";
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+
 		mmc0: mmc@01c0f000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c0f000 0x1000>;
-- 
2.1.4

WARNING: multiple messages have this Message-ID (diff)
From: wens@csie.org (Chen-Yu Tsai)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 05/10] ARM: dts: sun9i: Add usb phy nodes to a80 dtsi
Date: Wed, 28 Jan 2015 03:54:10 +0800	[thread overview]
Message-ID: <1422388455-25923-6-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1422388455-25923-1-git-send-email-wens@csie.org>

On sun9i, there are 3 independent usb phys for EHCI/OHCI.
Add device nodes for them.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm/boot/dts/sun9i-a80.dtsi | 37 +++++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 679cf2878800..d7ebd9390b01 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -355,6 +355,43 @@
 		 */
 		ranges = <0 0 0 0x20000000>;
 
+		usbphy1: phy at 00a00800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a00800 0x4>;
+			clocks = <&usb_phy_clk 1>;
+			clock-names = "phy";
+			resets = <&usb_phy_clk 17>;
+			reset-names = "phy";
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+
+		usbphy2: phy at 00a01800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a01800 0x4>;
+			clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>,
+				 <&usb_phy_clk 3>;
+			clock-names = "hsic_480M", "hsic_12M", "phy";
+			resets = <&usb_phy_clk 18>, <&usb_phy_clk 19>;
+			reset-names = "hsic", "phy";
+			status = "disabled";
+			#phy-cells = <0>;
+			/* usb1 is always used with HSIC */
+			phy_type = "hsic";
+		};
+
+		usbphy3: phy at 00a02800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a02800 0x4>;
+			clocks = <&usb_phy_clk 4>, <&usb_phy_clk 10>,
+				 <&usb_phy_clk 5>;
+			clock-names = "hsic_480M", "hsic_12M", "phy";
+			resets = <&usb_phy_clk 20>, <&usb_phy_clk 21>;
+			reset-names = "hsic", "phy";
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+
 		mmc0: mmc at 01c0f000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c0f000 0x1000>;
-- 
2.1.4

  parent reply	other threads:[~2015-01-27 19:54 UTC|newest]

Thread overview: 60+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-27 19:54 [PATCH v3 00/10] ARM: sun9i: Add USB host controller support for A80 Chen-Yu Tsai
2015-01-27 19:54 ` Chen-Yu Tsai
2015-01-27 19:54 ` Chen-Yu Tsai
2015-01-27 19:54 ` [PATCH v3 01/10] clk: sunxi: Move USB clocks to separate file Chen-Yu Tsai
2015-01-27 19:54   ` Chen-Yu Tsai
2015-01-27 19:54   ` Chen-Yu Tsai
2015-02-01 13:53   ` Maxime Ripard
2015-02-01 13:53     ` Maxime Ripard
2015-02-01 13:53     ` Maxime Ripard
2015-01-27 19:54 ` [PATCH v3 02/10] clk: sunxi: Add support for sun9i A80 USB clocks and resets Chen-Yu Tsai
2015-01-27 19:54   ` Chen-Yu Tsai
2015-01-27 19:54   ` Chen-Yu Tsai
2015-02-01 13:55   ` Maxime Ripard
2015-02-01 13:55     ` Maxime Ripard
2015-02-01 13:55     ` Maxime Ripard
2015-01-27 19:54 ` [PATCH v3 03/10] ARM: dts: sun9i: Add usb clock nodes to a80 dtsi Chen-Yu Tsai
2015-01-27 19:54   ` Chen-Yu Tsai
2015-01-27 19:54   ` Chen-Yu Tsai
2015-02-01 13:56   ` Maxime Ripard
2015-02-01 13:56     ` Maxime Ripard
2015-02-01 13:56     ` Maxime Ripard
2015-01-27 19:54 ` [PATCH v3 04/10] phy: Add driver to support individual USB PHYs on sun9i Chen-Yu Tsai
2015-01-27 19:54   ` Chen-Yu Tsai
2015-01-27 19:54   ` Chen-Yu Tsai
2015-02-01 14:15   ` Maxime Ripard
2015-02-01 14:15     ` Maxime Ripard
2015-02-01 14:15     ` Maxime Ripard
2015-01-27 19:54 ` Chen-Yu Tsai [this message]
2015-01-27 19:54   ` [PATCH v3 05/10] ARM: dts: sun9i: Add usb phy nodes to a80 dtsi Chen-Yu Tsai
2015-01-27 19:54   ` Chen-Yu Tsai
2015-02-01 14:16   ` Maxime Ripard
2015-02-01 14:16     ` Maxime Ripard
2015-02-01 14:16     ` Maxime Ripard
2015-01-27 19:54 ` [PATCH v3 06/10] ARM: dts: sun9i: Add USB host controller " Chen-Yu Tsai
2015-01-27 19:54   ` Chen-Yu Tsai
2015-01-27 19:54   ` Chen-Yu Tsai
2015-02-01 14:17   ` Maxime Ripard
2015-02-01 14:17     ` Maxime Ripard
2015-02-01 14:17     ` Maxime Ripard
2015-02-01 14:31     ` Chen-Yu Tsai
2015-02-01 14:31       ` Chen-Yu Tsai
2015-02-01 14:31       ` Chen-Yu Tsai
2015-01-27 19:54 ` [PATCH v3 07/10] ARM: dts: sunxi: Add usb3_vbus regulator to common regulators dtsi Chen-Yu Tsai
2015-01-27 19:54   ` Chen-Yu Tsai
2015-01-27 19:54   ` Chen-Yu Tsai
2015-02-01 14:20   ` Maxime Ripard
2015-02-01 14:20     ` Maxime Ripard
2015-02-01 14:20     ` Maxime Ripard
2015-02-01 14:28     ` Chen-Yu Tsai
2015-02-01 14:28       ` Chen-Yu Tsai
2015-02-01 14:28       ` Chen-Yu Tsai
2015-01-27 19:54 ` [PATCH v3 08/10] ARM: dts: sun9i: Enable USB support on A80 Optimus board Chen-Yu Tsai
2015-01-27 19:54   ` Chen-Yu Tsai
2015-01-27 19:54   ` Chen-Yu Tsai
2015-01-27 19:54 ` [PATCH v3 09/10] ARM: sunxi_defconfig: Enable CONFIG_PHY_SUN9I_USB Chen-Yu Tsai
2015-01-27 19:54   ` Chen-Yu Tsai
2015-01-27 19:54   ` Chen-Yu Tsai
2015-01-27 19:54 ` [PATCH v3 10/10] ARM: multi_v7_defconfig: " Chen-Yu Tsai
2015-01-27 19:54   ` Chen-Yu Tsai
2015-01-27 19:54   ` Chen-Yu Tsai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1422388455-25923-6-git-send-email-wens@csie.org \
    --to=wens@csie.org \
    --cc=devicetree@vger.kernel.org \
    --cc=emilio@elopez.com.ar \
    --cc=grant.likely@linaro.org \
    --cc=kishon@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=maxime.ripard@free-electrons.com \
    --cc=mturquette@linaro.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.