From: Chen-Yu Tsai <wens@csie.org>
To: Maxime Ripard <maxime.ripard@free-electrons.com>,
Mike Turquette <mturquette@linaro.org>,
Emilio Lopez <emilio@elopez.com.ar>,
Rob Herring <robh+dt@kernel.org>,
Grant Likely <grant.likely@linaro.org>,
Kishon Vijay Abraham I <kishon@ti.com>
Cc: Chen-Yu Tsai <wens@csie.org>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com
Subject: [PATCH v3 07/10] ARM: dts: sunxi: Add usb3_vbus regulator to common regulators dtsi
Date: Wed, 28 Jan 2015 03:54:12 +0800 [thread overview]
Message-ID: <1422388455-25923-8-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1422388455-25923-1-git-send-email-wens@csie.org>
Some SoCs have a total of 4 possible USB controllers. One such example
is the A80, which has one USB3 dual role device and 3 EHCI/OHCI pairs.
Add a common VBUS regulator for the last host controller.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sunxi-common-regulators.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
index e02baa66b33c..97fe8d73c4f7 100644
--- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi
+++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
@@ -130,6 +130,16 @@
status = "disabled";
};
+ reg_usb3_vbus: usb3-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ regulator-name = "usb3-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ status = "disabled";
+ };
+
reg_vcc3v0: vcc3v0 {
compatible = "regulator-fixed";
regulator-name = "vcc3v0";
--
2.1.4
WARNING: multiple messages have this Message-ID (diff)
From: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
To: Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Mike Turquette
<mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Emilio Lopez <emilio-0Z03zUJReD5OxF6Tv1QG9Q@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Grant Likely
<grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
Cc: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Subject: [PATCH v3 07/10] ARM: dts: sunxi: Add usb3_vbus regulator to common regulators dtsi
Date: Wed, 28 Jan 2015 03:54:12 +0800 [thread overview]
Message-ID: <1422388455-25923-8-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1422388455-25923-1-git-send-email-wens-jdAy2FN1RRM@public.gmane.org>
Some SoCs have a total of 4 possible USB controllers. One such example
is the A80, which has one USB3 dual role device and 3 EHCI/OHCI pairs.
Add a common VBUS regulator for the last host controller.
Signed-off-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
---
arch/arm/boot/dts/sunxi-common-regulators.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
index e02baa66b33c..97fe8d73c4f7 100644
--- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi
+++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
@@ -130,6 +130,16 @@
status = "disabled";
};
+ reg_usb3_vbus: usb3-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ regulator-name = "usb3-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ status = "disabled";
+ };
+
reg_vcc3v0: vcc3v0 {
compatible = "regulator-fixed";
regulator-name = "vcc3v0";
--
2.1.4
WARNING: multiple messages have this Message-ID (diff)
From: wens@csie.org (Chen-Yu Tsai)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 07/10] ARM: dts: sunxi: Add usb3_vbus regulator to common regulators dtsi
Date: Wed, 28 Jan 2015 03:54:12 +0800 [thread overview]
Message-ID: <1422388455-25923-8-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1422388455-25923-1-git-send-email-wens@csie.org>
Some SoCs have a total of 4 possible USB controllers. One such example
is the A80, which has one USB3 dual role device and 3 EHCI/OHCI pairs.
Add a common VBUS regulator for the last host controller.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sunxi-common-regulators.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
index e02baa66b33c..97fe8d73c4f7 100644
--- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi
+++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
@@ -130,6 +130,16 @@
status = "disabled";
};
+ reg_usb3_vbus: usb3-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ regulator-name = "usb3-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ status = "disabled";
+ };
+
reg_vcc3v0: vcc3v0 {
compatible = "regulator-fixed";
regulator-name = "vcc3v0";
--
2.1.4
next prev parent reply other threads:[~2015-01-27 19:57 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-27 19:54 [PATCH v3 00/10] ARM: sun9i: Add USB host controller support for A80 Chen-Yu Tsai
2015-01-27 19:54 ` Chen-Yu Tsai
2015-01-27 19:54 ` Chen-Yu Tsai
2015-01-27 19:54 ` [PATCH v3 01/10] clk: sunxi: Move USB clocks to separate file Chen-Yu Tsai
2015-01-27 19:54 ` Chen-Yu Tsai
2015-01-27 19:54 ` Chen-Yu Tsai
2015-02-01 13:53 ` Maxime Ripard
2015-02-01 13:53 ` Maxime Ripard
2015-02-01 13:53 ` Maxime Ripard
2015-01-27 19:54 ` [PATCH v3 02/10] clk: sunxi: Add support for sun9i A80 USB clocks and resets Chen-Yu Tsai
2015-01-27 19:54 ` Chen-Yu Tsai
2015-01-27 19:54 ` Chen-Yu Tsai
2015-02-01 13:55 ` Maxime Ripard
2015-02-01 13:55 ` Maxime Ripard
2015-02-01 13:55 ` Maxime Ripard
2015-01-27 19:54 ` [PATCH v3 03/10] ARM: dts: sun9i: Add usb clock nodes to a80 dtsi Chen-Yu Tsai
2015-01-27 19:54 ` Chen-Yu Tsai
2015-01-27 19:54 ` Chen-Yu Tsai
2015-02-01 13:56 ` Maxime Ripard
2015-02-01 13:56 ` Maxime Ripard
2015-02-01 13:56 ` Maxime Ripard
2015-01-27 19:54 ` [PATCH v3 04/10] phy: Add driver to support individual USB PHYs on sun9i Chen-Yu Tsai
2015-01-27 19:54 ` Chen-Yu Tsai
2015-01-27 19:54 ` Chen-Yu Tsai
2015-02-01 14:15 ` Maxime Ripard
2015-02-01 14:15 ` Maxime Ripard
2015-02-01 14:15 ` Maxime Ripard
2015-01-27 19:54 ` [PATCH v3 05/10] ARM: dts: sun9i: Add usb phy nodes to a80 dtsi Chen-Yu Tsai
2015-01-27 19:54 ` Chen-Yu Tsai
2015-01-27 19:54 ` Chen-Yu Tsai
2015-02-01 14:16 ` Maxime Ripard
2015-02-01 14:16 ` Maxime Ripard
2015-02-01 14:16 ` Maxime Ripard
2015-01-27 19:54 ` [PATCH v3 06/10] ARM: dts: sun9i: Add USB host controller " Chen-Yu Tsai
2015-01-27 19:54 ` Chen-Yu Tsai
2015-01-27 19:54 ` Chen-Yu Tsai
2015-02-01 14:17 ` Maxime Ripard
2015-02-01 14:17 ` Maxime Ripard
2015-02-01 14:17 ` Maxime Ripard
2015-02-01 14:31 ` Chen-Yu Tsai
2015-02-01 14:31 ` Chen-Yu Tsai
2015-02-01 14:31 ` Chen-Yu Tsai
2015-01-27 19:54 ` Chen-Yu Tsai [this message]
2015-01-27 19:54 ` [PATCH v3 07/10] ARM: dts: sunxi: Add usb3_vbus regulator to common regulators dtsi Chen-Yu Tsai
2015-01-27 19:54 ` Chen-Yu Tsai
2015-02-01 14:20 ` Maxime Ripard
2015-02-01 14:20 ` Maxime Ripard
2015-02-01 14:20 ` Maxime Ripard
2015-02-01 14:28 ` Chen-Yu Tsai
2015-02-01 14:28 ` Chen-Yu Tsai
2015-02-01 14:28 ` Chen-Yu Tsai
2015-01-27 19:54 ` [PATCH v3 08/10] ARM: dts: sun9i: Enable USB support on A80 Optimus board Chen-Yu Tsai
2015-01-27 19:54 ` Chen-Yu Tsai
2015-01-27 19:54 ` Chen-Yu Tsai
2015-01-27 19:54 ` [PATCH v3 09/10] ARM: sunxi_defconfig: Enable CONFIG_PHY_SUN9I_USB Chen-Yu Tsai
2015-01-27 19:54 ` Chen-Yu Tsai
2015-01-27 19:54 ` Chen-Yu Tsai
2015-01-27 19:54 ` [PATCH v3 10/10] ARM: multi_v7_defconfig: " Chen-Yu Tsai
2015-01-27 19:54 ` Chen-Yu Tsai
2015-01-27 19:54 ` Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1422388455-25923-8-git-send-email-wens@csie.org \
--to=wens@csie.org \
--cc=devicetree@vger.kernel.org \
--cc=emilio@elopez.com.ar \
--cc=grant.likely@linaro.org \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=maxime.ripard@free-electrons.com \
--cc=mturquette@linaro.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.