From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> To: <ath10k@lists.infradead.org> Cc: <linux-wireless@vger.kernel.org>, Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Subject: [PATCH v2 2/2] ath10k: Increase copy engine entries for rx wmi Date: Mon, 9 Feb 2015 11:16:54 +0530 [thread overview] Message-ID: <1423460814-2767-2-git-send-email-rmanohar@qti.qualcomm.com> (raw) In-Reply-To: <1423460814-2767-1-git-send-email-rmanohar@qti.qualcomm.com> Having lower number of copy engine entries for target to host WMI ring is causing drops in receiving management frames. This issue is observed during max clients (128 clients) stress testing. While bursting deauthentication frames from simulated clients, approx. 70% of frames are getting dropped due to lower ring entries. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> --- drivers/net/wireless/ath/ath10k/pci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index e6972b0..f3174a6 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -113,7 +113,7 @@ static const struct ce_attr host_ce_config_wlan[] = { .flags = CE_ATTR_FLAGS, .src_nentries = 0, .src_sz_max = 2048, - .dest_nentries = 32, + .dest_nentries = 128, }, /* CE3: host->target WMI */ @@ -183,7 +183,7 @@ static const struct ce_pipe_config target_ce_config_wlan[] = { { .pipenum = __cpu_to_le32(2), .pipedir = __cpu_to_le32(PIPEDIR_IN), - .nentries = __cpu_to_le32(32), + .nentries = __cpu_to_le32(64), .nbytes_max = __cpu_to_le32(2048), .flags = __cpu_to_le32(CE_ATTR_FLAGS), .reserved = __cpu_to_le32(0), -- 2.2.2
WARNING: multiple messages have this Message-ID (diff)
From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> To: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org, Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Subject: [PATCH v2 2/2] ath10k: Increase copy engine entries for rx wmi Date: Mon, 9 Feb 2015 11:16:54 +0530 [thread overview] Message-ID: <1423460814-2767-2-git-send-email-rmanohar@qti.qualcomm.com> (raw) In-Reply-To: <1423460814-2767-1-git-send-email-rmanohar@qti.qualcomm.com> Having lower number of copy engine entries for target to host WMI ring is causing drops in receiving management frames. This issue is observed during max clients (128 clients) stress testing. While bursting deauthentication frames from simulated clients, approx. 70% of frames are getting dropped due to lower ring entries. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> --- drivers/net/wireless/ath/ath10k/pci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index e6972b0..f3174a6 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -113,7 +113,7 @@ static const struct ce_attr host_ce_config_wlan[] = { .flags = CE_ATTR_FLAGS, .src_nentries = 0, .src_sz_max = 2048, - .dest_nentries = 32, + .dest_nentries = 128, }, /* CE3: host->target WMI */ @@ -183,7 +183,7 @@ static const struct ce_pipe_config target_ce_config_wlan[] = { { .pipenum = __cpu_to_le32(2), .pipedir = __cpu_to_le32(PIPEDIR_IN), - .nentries = __cpu_to_le32(32), + .nentries = __cpu_to_le32(64), .nbytes_max = __cpu_to_le32(2048), .flags = __cpu_to_le32(CE_ATTR_FLAGS), .reserved = __cpu_to_le32(0), -- 2.2.2 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2015-02-09 5:47 UTC|newest] Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-02-09 5:46 [PATCH v2 1/2] ath10k: Bypass PLL setting on target init for QCA9888 Rajkumar Manoharan 2015-02-09 5:46 ` Rajkumar Manoharan 2015-02-09 5:46 ` Rajkumar Manoharan [this message] 2015-02-09 5:46 ` [PATCH v2 2/2] ath10k: Increase copy engine entries for rx wmi Rajkumar Manoharan 2015-02-09 22:54 ` Peter Oh 2015-02-09 22:54 ` Peter Oh 2015-02-10 7:26 ` Rajkumar 2015-02-10 7:26 ` Rajkumar 2015-03-05 13:53 ` Kalle Valo 2015-03-05 13:53 ` Kalle Valo 2015-02-17 7:11 ` [PATCH v2 1/2] ath10k: Bypass PLL setting on target init for QCA9888 Rajkumar 2015-02-17 7:11 ` Rajkumar 2015-03-05 12:41 ` Kalle Valo 2015-03-05 12:41 ` Kalle Valo 2015-03-15 8:06 ` Rajkumar Manoharan 2015-03-15 8:06 ` Rajkumar Manoharan
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1423460814-2767-2-git-send-email-rmanohar@qti.qualcomm.com \ --to=rmanohar@qti.qualcomm.com \ --cc=ath10k@lists.infradead.org \ --cc=linux-wireless@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.