From: milan.plzik@gmail.com
To: jkosina@suse.cz
Cc: linux-input@vger.kernel.org,
digimend-devel@lists.sourceforge.net,
Milan Plzik <milan.plzik@gmail.com>
Subject: [PATCH] Fix report descriptor for Genius PenSketch M912
Date: Sat, 14 Feb 2015 09:48:44 +0100 [thread overview]
Message-ID: <1423903724-18792-1-git-send-email-milan.plzik@gmail.com> (raw)
From: Milan Plzik <milan.plzik@gmail.com>
Genius PenSketch M912 digitizer tablet sends incorrect report descriptor by
default. This patch replaces it with a corrected one.
Signed-off-by: Milan Plzik <milan.plzik@gmail.com>
---
drivers/hid/hid-core.c | 1 +
drivers/hid/hid-ids.h | 1 +
drivers/hid/hid-kye.c | 140 ++++++++++++++++++++++++++++++++++++++++
drivers/hid/usbhid/hid-quirks.c | 1 +
4 files changed, 143 insertions(+)
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 8b63879..3c21c0d 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1807,6 +1807,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_MOUSEPEN_I608X) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_MOUSEPEN_I608X_2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_M610X) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_PENSKETCH_M912) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LCPOWER, USB_DEVICE_ID_LCPOWER_LC1000 ) },
#if IS_ENABLED(CONFIG_HID_LENOVO)
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 9243359..945943d 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -528,6 +528,7 @@
#define USB_DEVICE_ID_KYE_MOUSEPEN_I608X 0x5011
#define USB_DEVICE_ID_KYE_MOUSEPEN_I608X_2 0x501a
#define USB_DEVICE_ID_KYE_EASYPEN_M610X 0x5013
+#define USB_DEVICE_ID_KYE_PENSKETCH_M912 0x5015
#define USB_VENDOR_ID_LABTEC 0x1020
#define USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD 0x0006
diff --git a/drivers/hid/hid-kye.c b/drivers/hid/hid-kye.c
index 158fcf5..32e6d8d 100644
--- a/drivers/hid/hid-kye.c
+++ b/drivers/hid/hid-kye.c
@@ -268,6 +268,137 @@ static __u8 easypen_m610x_rdesc_fixed[] = {
0xC0 /* End Collection */
};
+
+/* Original PenSketch M912 report descriptor size */
+#define PENSKETCH_M912_RDESC_ORIG_SIZE 482
+
+/* Fixed PenSketch M912 report descriptor */
+static __u8 pensketch_m912_rdesc_fixed[] = {
+ 0x05, 0x01, /* Usage Page (Desktop), */
+ 0x08, /* Usage (00h), */
+ 0xA1, 0x01, /* Collection (Application), */
+ 0x85, 0x05, /* Report ID (5), */
+ 0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
+ 0x09, 0x01, /* Usage (01h), */
+ 0x15, 0x81, /* Logical Minimum (-127), */
+ 0x25, 0x7F, /* Logical Maximum (127), */
+ 0x75, 0x08, /* Report Size (8), */
+ 0x95, 0x07, /* Report Count (7), */
+ 0xB1, 0x02, /* Feature (Variable), */
+ 0xC0, /* End Collection, */
+ 0x05, 0x0D, /* Usage Page (Digitizer), */
+ 0x09, 0x02, /* Usage (Pen), */
+ 0xA1, 0x01, /* Collection (Application), */
+ 0x85, 0x10, /* Report ID (16), */
+ 0x09, 0x20, /* Usage (Stylus), */
+ 0xA0, /* Collection (Physical), */
+ 0x09, 0x42, /* Usage (Tip Switch), */
+ 0x09, 0x44, /* Usage (Barrel Switch), */
+ 0x09, 0x46, /* Usage (Tablet Pick), */
+ 0x14, /* Logical Minimum (0), */
+ 0x25, 0x01, /* Logical Maximum (1), */
+ 0x75, 0x01, /* Report Size (1), */
+ 0x95, 0x03, /* Report Count (3), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x95, 0x04, /* Report Count (4), */
+ 0x81, 0x03, /* Input (Constant, Variable), */
+ 0x09, 0x32, /* Usage (In Range), */
+ 0x95, 0x01, /* Report Count (1), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x75, 0x10, /* Report Size (16), */
+ 0x95, 0x01, /* Report Count (1), */
+ 0xA4, /* Push, */
+ 0x05, 0x01, /* Usage Page (Desktop), */
+ 0x55, 0xFD, /* Unit Exponent (-3), */
+ 0x65, 0x13, /* Unit (Inch), */
+ 0x14, /* Logical Minimum (0), */
+ 0x34, /* Physical Minimum (0), */
+ 0x09, 0x30, /* Usage (X), */
+ 0x27, 0x00, 0xF0, 0x00, 0x00, /* Logical Maximum (61440), */
+ 0x46, 0xE0, 0x2E, /* Physical Maximum (12000), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x09, 0x31, /* Usage (Y), */
+ 0x27, 0x00, 0xB4, 0x00, 0x00, /* Logical Maximum (46080), */
+ 0x46, 0x28, 0x23, /* Physical Maximum (9000), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0xB4, /* Pop, */
+ 0x09, 0x30, /* Usage (Tip Pressure), */
+ 0x14, /* Logical Minimum (0), */
+ 0x26, 0xFF, 0x07, /* Logical Maximum (2047), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0xC0, /* End Collection, */
+ 0xC0, /* End Collection, */
+ 0x05, 0x0D, /* Usage Page (Digitizer), */
+ 0x09, 0x21, /* Usage (Puck), */
+ 0xA1, 0x01, /* Collection (Application), */
+ 0x85, 0x11, /* Report ID (17), */
+ 0x09, 0x21, /* Usage (Puck), */
+ 0xA0, /* Collection (Physical), */
+ 0x05, 0x09, /* Usage Page (Button), */
+ 0x75, 0x01, /* Report Size (1), */
+ 0x19, 0x01, /* Usage Minimum (01h), */
+ 0x29, 0x03, /* Usage Maximum (03h), */
+ 0x14, /* Logical Minimum (0), */
+ 0x25, 0x01, /* Logical Maximum (1), */
+ 0x95, 0x03, /* Report Count (3), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x95, 0x04, /* Report Count (4), */
+ 0x81, 0x01, /* Input (Constant), */
+ 0x95, 0x01, /* Report Count (1), */
+ 0x0B, 0x32, 0x00, 0x0D, 0x00, /* Usage (Digitizer In Range), */
+ 0x14, /* Logical Minimum (0), */
+ 0x25, 0x01, /* Logical Maximum (1), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0xA4, /* Push, */
+ 0x05, 0x01, /* Usage Page (Desktop), */
+ 0x75, 0x10, /* Report Size (16), */
+ 0x95, 0x01, /* Report Count (1), */
+ 0x55, 0xFD, /* Unit Exponent (-3), */
+ 0x65, 0x13, /* Unit (Inch), */
+ 0x14, /* Logical Minimum (0), */
+ 0x34, /* Physical Minimum (0), */
+ 0x09, 0x30, /* Usage (X), */
+ 0x27, 0x00, 0xF0, 0x00, 0x00, /* Logical Maximum (61440), */
+ 0x46, 0xE0, 0x2E, /* Physical Maximum (12000), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x09, 0x31, /* Usage (Y), */
+ 0x27, 0x00, 0xB4, 0x00, 0x00, /* Logical Maximum (46080), */
+ 0x46, 0x28, 0x23, /* Physical Maximum (9000), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x09, 0x38, /* Usage (Wheel), */
+ 0x75, 0x08, /* Report Size (8), */
+ 0x95, 0x01, /* Report Count (1), */
+ 0x15, 0xFF, /* Logical Minimum (-1), */
+ 0x25, 0x01, /* Logical Maximum (1), */
+ 0x34, /* Physical Minimum (0), */
+ 0x44, /* Physical Maximum (0), */
+ 0x81, 0x06, /* Input (Variable, Relative), */
+ 0xB4, /* Pop, */
+ 0xC0, /* End Collection, */
+ 0xC0, /* End Collection, */
+ 0x05, 0x0C, /* Usage Page (Consumer), */
+ 0x09, 0x01, /* Usage (Consumer Control), */
+ 0xA1, 0x01, /* Collection (Application), */
+ 0x85, 0x12, /* Report ID (18), */
+ 0x14, /* Logical Minimum (0), */
+ 0x25, 0x01, /* Logical Maximum (1), */
+ 0x75, 0x01, /* Report Size (1), */
+ 0x95, 0x08, /* Report Count (8), */
+ 0x05, 0x0C, /* Usage Page (Consumer), */
+ 0x0A, 0x6A, 0x02, /* Usage (AC Delete), */
+ 0x0A, 0x1A, 0x02, /* Usage (AC Undo), */
+ 0x0A, 0x01, 0x02, /* Usage (AC New), */
+ 0x0A, 0x2F, 0x02, /* Usage (AC Zoom), */
+ 0x0A, 0x25, 0x02, /* Usage (AC Forward), */
+ 0x0A, 0x24, 0x02, /* Usage (AC Back), */
+ 0x0A, 0x2D, 0x02, /* Usage (AC Zoom In), */
+ 0x0A, 0x2E, 0x02, /* Usage (AC Zoom Out), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x95, 0x30, /* Report Count (48), */
+ 0x81, 0x03, /* Input (Constant, Variable), */
+ 0xC0 /* End Collection */
+};
+
static __u8 *kye_consumer_control_fixup(struct hid_device *hdev, __u8 *rdesc,
unsigned int *rsize, int offset, const char *device_name) {
/*
@@ -335,6 +466,12 @@ static __u8 *kye_report_fixup(struct hid_device *hdev, __u8 *rdesc,
*rsize = sizeof(easypen_m610x_rdesc_fixed);
}
break;
+ case USB_DEVICE_ID_KYE_PENSKETCH_M912:
+ if (*rsize == PENSKETCH_M912_RDESC_ORIG_SIZE) {
+ rdesc = pensketch_m912_rdesc_fixed;
+ *rsize = sizeof(pensketch_m912_rdesc_fixed);
+ }
+ break;
case USB_DEVICE_ID_GENIUS_GILA_GAMING_MOUSE:
rdesc = kye_consumer_control_fixup(hdev, rdesc, rsize, 104,
"Genius Gila Gaming Mouse");
@@ -418,6 +555,7 @@ static int kye_probe(struct hid_device *hdev, const struct hid_device_id *id)
case USB_DEVICE_ID_KYE_MOUSEPEN_I608X:
case USB_DEVICE_ID_KYE_MOUSEPEN_I608X_2:
case USB_DEVICE_ID_KYE_EASYPEN_M610X:
+ case USB_DEVICE_ID_KYE_PENSKETCH_M912:
ret = kye_tablet_enable(hdev);
if (ret) {
hid_err(hdev, "tablet enabling failed\n");
@@ -457,6 +595,8 @@ static const struct hid_device_id kye_devices[] = {
USB_DEVICE_ID_GENIUS_GX_IMPERATOR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE,
USB_DEVICE_ID_GENIUS_MANTICORE) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_KYE,
+ USB_DEVICE_ID_KYE_PENSKETCH_M912) },
{ }
};
MODULE_DEVICE_TABLE(hid, kye_devices);
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index b27b3d3..488ec99 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -126,6 +126,7 @@ static const struct hid_blacklist {
{ USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_MOUSEPEN_I608X, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_MOUSEPEN_I608X_2, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_M610X, HID_QUIRK_MULTI_INPUT },
+ { USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_PENSKETCH_M912, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_DUOSENSE, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_SEMICO, USB_DEVICE_ID_SEMICO_USB_KEYKOARD, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_LTS1, HID_QUIRK_NO_INIT_REPORTS },
--
2.2.2
next reply other threads:[~2015-02-14 8:48 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-14 8:48 milan.plzik [this message]
2015-02-16 10:10 ` [DIGImend-devel] [PATCH] Fix report descriptor for Genius PenSketch M912 Nikolai Kondrashov
2015-02-17 12:16 ` Jiri Kosina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1423903724-18792-1-git-send-email-milan.plzik@gmail.com \
--to=milan.plzik@gmail.com \
--cc=digimend-devel@lists.sourceforge.net \
--cc=jkosina@suse.cz \
--cc=linux-input@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.