From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> To: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>, Gregory Clement <gregory.clement@free-electrons.com>, Gabriel Dobato <dobatog@gmail.com>, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH 6/8] ARM: dts: dove: Add some more common pinctrl settings Date: Tue, 17 Feb 2015 19:52:07 +0100 [thread overview] Message-ID: <1424199129-22099-7-git-send-email-sebastian.hesselbarth@gmail.com> (raw) In-Reply-To: <1424199129-22099-1-git-send-email-sebastian.hesselbarth@gmail.com> This add common pinctrl settings for pcie[01]_clkreq, spi1, i2c[23], and internal i2c mux. These settings have either one or two options only, so put them into the SoC dtsi instead of repeating them on board level. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> --- Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Gabriel Dobato <dobatog@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org --- arch/arm/boot/dts/dove.dtsi | 52 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 81209bd9525a..9ad829523a13 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -451,6 +451,11 @@ marvell,function = "gpio"; }; + pmx_pcie1_clkreq: pmx-pcie1-clkreq { + marvell,pins = "mpp9"; + marvell,function = "pex1"; + }; + pmx_gpio_10: pmx-gpio-10 { marvell,pins = "mpp10"; marvell,function = "gpio"; @@ -461,6 +466,11 @@ marvell,function = "gpio"; }; + pmx_pcie0_clkreq: pmx-pcie0-clkreq { + marvell,pins = "mpp11"; + marvell,function = "pex0"; + }; + pmx_gpio_12: pmx-gpio-12 { marvell,pins = "mpp12"; marvell,function = "gpio"; @@ -566,6 +576,18 @@ marvell,function = "gpio"; }; + pmx_spi1_4_7: pmx-spi1-4-7 { + marvell,pins = "mpp4", "mpp5", + "mpp6", "mpp7"; + marvell,function = "spi1"; + }; + + pmx_spi1_20_23: pmx-spi1-20-23 { + marvell,pins = "mpp20", "mpp21", + "mpp22", "mpp23"; + marvell,function = "spi1"; + }; + pmx_uart1: pmx-uart1 { marvell,pins = "mpp_uart1"; marvell,function = "uart1"; @@ -585,6 +607,36 @@ marvell,pins = "mpp_nand"; marvell,function = "gpo"; }; + + pmx_i2c1: pmx-i2c1 { + marvell,pins = "mpp17", "mpp19"; + marvell,function = "twsi"; + }; + + pmx_i2c2: pmx-i2c2 { + marvell,pins = "mpp_audio1"; + marvell,function = "twsi"; + }; + + pmx_ssp_i2c2: pmx-ssp-i2c2 { + marvell,pins = "mpp_audio1"; + marvell,function = "ssp/twsi"; + }; + + pmx_i2cmux_0: pmx-i2cmux-0 { + marvell,pins = "twsi"; + marvell,function = "twsi-opt1"; + }; + + pmx_i2cmux_1: pmx-i2cmux-1 { + marvell,pins = "twsi"; + marvell,function = "twsi-opt2"; + }; + + pmx_i2cmux_2: pmx-i2cmux-2 { + marvell,pins = "twsi"; + marvell,function = "twsi-opt3"; + }; }; core_clk: core-clocks@d0214 { -- 2.1.0
WARNING: multiple messages have this Message-ID (diff)
From: sebastian.hesselbarth@gmail.com (Sebastian Hesselbarth) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 6/8] ARM: dts: dove: Add some more common pinctrl settings Date: Tue, 17 Feb 2015 19:52:07 +0100 [thread overview] Message-ID: <1424199129-22099-7-git-send-email-sebastian.hesselbarth@gmail.com> (raw) In-Reply-To: <1424199129-22099-1-git-send-email-sebastian.hesselbarth@gmail.com> This add common pinctrl settings for pcie[01]_clkreq, spi1, i2c[23], and internal i2c mux. These settings have either one or two options only, so put them into the SoC dtsi instead of repeating them on board level. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> --- Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Gabriel Dobato <dobatog@gmail.com> Cc: linux-arm-kernel at lists.infradead.org Cc: linux-kernel at vger.kernel.org --- arch/arm/boot/dts/dove.dtsi | 52 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 81209bd9525a..9ad829523a13 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -451,6 +451,11 @@ marvell,function = "gpio"; }; + pmx_pcie1_clkreq: pmx-pcie1-clkreq { + marvell,pins = "mpp9"; + marvell,function = "pex1"; + }; + pmx_gpio_10: pmx-gpio-10 { marvell,pins = "mpp10"; marvell,function = "gpio"; @@ -461,6 +466,11 @@ marvell,function = "gpio"; }; + pmx_pcie0_clkreq: pmx-pcie0-clkreq { + marvell,pins = "mpp11"; + marvell,function = "pex0"; + }; + pmx_gpio_12: pmx-gpio-12 { marvell,pins = "mpp12"; marvell,function = "gpio"; @@ -566,6 +576,18 @@ marvell,function = "gpio"; }; + pmx_spi1_4_7: pmx-spi1-4-7 { + marvell,pins = "mpp4", "mpp5", + "mpp6", "mpp7"; + marvell,function = "spi1"; + }; + + pmx_spi1_20_23: pmx-spi1-20-23 { + marvell,pins = "mpp20", "mpp21", + "mpp22", "mpp23"; + marvell,function = "spi1"; + }; + pmx_uart1: pmx-uart1 { marvell,pins = "mpp_uart1"; marvell,function = "uart1"; @@ -585,6 +607,36 @@ marvell,pins = "mpp_nand"; marvell,function = "gpo"; }; + + pmx_i2c1: pmx-i2c1 { + marvell,pins = "mpp17", "mpp19"; + marvell,function = "twsi"; + }; + + pmx_i2c2: pmx-i2c2 { + marvell,pins = "mpp_audio1"; + marvell,function = "twsi"; + }; + + pmx_ssp_i2c2: pmx-ssp-i2c2 { + marvell,pins = "mpp_audio1"; + marvell,function = "ssp/twsi"; + }; + + pmx_i2cmux_0: pmx-i2cmux-0 { + marvell,pins = "twsi"; + marvell,function = "twsi-opt1"; + }; + + pmx_i2cmux_1: pmx-i2cmux-1 { + marvell,pins = "twsi"; + marvell,function = "twsi-opt2"; + }; + + pmx_i2cmux_2: pmx-i2cmux-2 { + marvell,pins = "twsi"; + marvell,function = "twsi-opt3"; + }; }; core_clk: core-clocks at d0214 { -- 2.1.0
next prev parent reply other threads:[~2015-02-17 18:54 UTC|newest] Thread overview: 123+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-02-17 18:52 [PATCH 0/8] Add proper support for Compulab CM-A510/SBC-A510 Sebastian Hesselbarth 2015-02-17 18:52 ` Sebastian Hesselbarth 2015-02-17 18:52 ` Sebastian Hesselbarth 2015-02-17 18:52 ` [PATCH 1/8] i2c: mux-pinctrl: Rework to honor disabled child nodes Sebastian Hesselbarth 2015-02-17 18:52 ` Sebastian Hesselbarth 2015-02-17 18:52 ` Sebastian Hesselbarth 2015-02-17 20:46 ` Stephen Warren 2015-02-17 20:46 ` Stephen Warren 2015-02-17 20:46 ` Stephen Warren 2015-02-17 21:08 ` Sebastian Hesselbarth 2015-02-17 21:08 ` Sebastian Hesselbarth 2015-02-17 21:08 ` Sebastian Hesselbarth 2015-02-17 21:15 ` Stephen Warren 2015-02-17 21:15 ` Stephen Warren 2015-02-17 21:19 ` Sebastian Hesselbarth 2015-02-17 21:19 ` Sebastian Hesselbarth 2015-02-26 21:46 ` Stephen Warren 2015-02-26 21:46 ` Stephen Warren 2015-02-17 18:52 ` [PATCH 2/8] devicetree: vendor-prefixes: Add CompuLab to known vendors Sebastian Hesselbarth 2015-02-17 18:52 ` Sebastian Hesselbarth 2015-02-17 19:37 ` Rob Herring 2015-02-17 19:37 ` Rob Herring 2015-02-17 19:37 ` Rob Herring 2015-02-17 18:52 ` [PATCH 3/8] ARM: dts: dove: Fix uart[23] reg property Sebastian Hesselbarth 2015-02-17 18:52 ` Sebastian Hesselbarth 2015-02-23 14:54 ` Gregory CLEMENT 2015-02-23 14:54 ` Gregory CLEMENT 2015-02-17 18:52 ` [PATCH 4/8] ARM: dts: dove: Always include gpio and interrupt-controller headers Sebastian Hesselbarth 2015-02-17 18:52 ` Sebastian Hesselbarth 2015-02-23 14:54 ` Gregory CLEMENT 2015-02-23 14:54 ` Gregory CLEMENT 2015-02-17 18:52 ` [PATCH 5/8] ARM: dts: dove: Add node labels for PCIe ports 0 and 1 Sebastian Hesselbarth 2015-02-17 18:52 ` Sebastian Hesselbarth 2015-02-23 14:55 ` Gregory CLEMENT 2015-02-23 14:55 ` Gregory CLEMENT 2015-02-17 18:52 ` Sebastian Hesselbarth [this message] 2015-02-17 18:52 ` [PATCH 6/8] ARM: dts: dove: Add some more common pinctrl settings Sebastian Hesselbarth 2015-02-23 14:56 ` Gregory CLEMENT 2015-02-23 14:56 ` Gregory CLEMENT 2015-02-17 18:52 ` [PATCH 7/8] ARM: dts: dove: Add internal i2c multiplexer node Sebastian Hesselbarth 2015-02-17 18:52 ` Sebastian Hesselbarth 2015-02-23 15:07 ` Gregory CLEMENT 2015-02-23 15:07 ` Gregory CLEMENT 2015-02-23 15:07 ` Gregory CLEMENT 2015-02-17 18:52 ` [PATCH 8/8] ARM: dts: dove: Add proper support for Compulab CM-A510/SBC-A510 Sebastian Hesselbarth 2015-02-17 18:52 ` Sebastian Hesselbarth 2015-02-26 17:55 ` [PATCH 0/8] " Gregory CLEMENT 2015-02-26 17:55 ` Gregory CLEMENT 2015-02-26 17:55 ` Gregory CLEMENT 2015-02-26 19:39 ` Sebastian Hesselbarth 2015-02-26 19:39 ` Sebastian Hesselbarth 2015-02-26 20:01 ` Stephen Warren 2015-02-26 20:01 ` Stephen Warren 2015-02-26 20:35 ` Sebastian Hesselbarth 2015-02-26 20:35 ` Sebastian Hesselbarth 2015-02-27 12:24 ` [PATCH v2 0/4] " Sebastian Hesselbarth 2015-02-27 12:24 ` Sebastian Hesselbarth 2015-02-27 12:24 ` Sebastian Hesselbarth 2015-02-27 12:24 ` [PATCH v2 1/4] i2c: mux-pinctrl: Rework to honor disabled child nodes Sebastian Hesselbarth 2015-02-27 12:24 ` Sebastian Hesselbarth 2015-02-27 12:24 ` Sebastian Hesselbarth 2015-03-02 20:01 ` Stephen Warren 2015-03-02 20:01 ` Stephen Warren 2015-03-02 20:01 ` Stephen Warren 2015-03-04 9:10 ` Sebastian Hesselbarth 2015-03-04 9:10 ` Sebastian Hesselbarth 2015-03-04 9:10 ` Sebastian Hesselbarth 2015-03-09 12:21 ` [PATCH v3 " Sebastian Hesselbarth 2015-03-09 12:21 ` Sebastian Hesselbarth 2015-03-09 12:21 ` Sebastian Hesselbarth 2015-03-10 16:28 ` Stephen Warren 2015-03-10 16:28 ` Stephen Warren 2015-03-10 16:28 ` Stephen Warren 2015-03-16 20:15 ` Sebastian Hesselbarth 2015-03-16 20:15 ` Sebastian Hesselbarth 2015-03-16 20:15 ` Sebastian Hesselbarth 2015-03-18 12:30 ` Wolfram Sang 2015-03-18 12:30 ` Wolfram Sang 2015-03-18 13:23 ` Sebastian Hesselbarth 2015-03-18 13:23 ` Sebastian Hesselbarth 2015-03-18 13:23 ` Sebastian Hesselbarth 2015-03-18 14:00 ` Wolfram Sang 2015-03-18 14:00 ` Wolfram Sang 2015-03-18 23:10 ` Sebastian Hesselbarth 2015-03-18 23:10 ` Sebastian Hesselbarth 2015-03-19 10:09 ` Wolfram Sang 2015-03-19 10:09 ` Wolfram Sang 2015-03-19 10:09 ` Wolfram Sang 2015-03-19 10:48 ` Wolfram Sang 2015-03-19 10:48 ` Wolfram Sang 2015-03-19 10:48 ` Wolfram Sang 2015-03-19 15:47 ` Stephen Warren 2015-03-19 15:47 ` Stephen Warren 2015-03-19 15:47 ` Stephen Warren 2015-03-19 16:02 ` Wolfram Sang 2015-03-19 16:02 ` Wolfram Sang 2015-03-19 16:02 ` Wolfram Sang 2015-03-19 16:49 ` Stephen Warren 2015-03-19 16:49 ` Stephen Warren 2015-03-19 20:52 ` Sebastian Hesselbarth 2015-03-19 20:52 ` Sebastian Hesselbarth 2015-03-20 10:19 ` Wolfram Sang 2015-03-20 10:19 ` Wolfram Sang 2015-03-21 21:00 ` Wolfram Sang 2015-03-21 21:00 ` Wolfram Sang 2015-03-21 21:00 ` Wolfram Sang 2015-03-22 13:03 ` Sebastian Hesselbarth 2015-03-22 13:03 ` Sebastian Hesselbarth 2015-03-22 13:03 ` Sebastian Hesselbarth 2015-03-23 18:32 ` Wolfram Sang 2015-03-23 18:32 ` Wolfram Sang 2015-03-23 18:32 ` Wolfram Sang 2015-03-27 21:08 ` Sebastian Hesselbarth 2015-03-27 21:08 ` Sebastian Hesselbarth 2015-04-03 18:17 ` Wolfram Sang 2015-04-03 18:17 ` Wolfram Sang 2015-04-03 18:17 ` Wolfram Sang 2015-02-27 12:24 ` [PATCH v2 2/4] devicetree: vendor-prefixes: Add CompuLab to known vendors Sebastian Hesselbarth 2015-02-27 12:24 ` Sebastian Hesselbarth 2015-02-27 12:24 ` [PATCH v2 3/4] ARM: dts: dove: Add internal i2c multiplexer node Sebastian Hesselbarth 2015-02-27 12:24 ` Sebastian Hesselbarth 2015-02-27 12:24 ` [PATCH v2 4/4] ARM: dts: dove: Add proper support for Compulab CM-A510/SBC-A510 Sebastian Hesselbarth 2015-02-27 12:24 ` Sebastian Hesselbarth
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1424199129-22099-7-git-send-email-sebastian.hesselbarth@gmail.com \ --to=sebastian.hesselbarth@gmail.com \ --cc=andrew@lunn.ch \ --cc=dobatog@gmail.com \ --cc=gregory.clement@free-electrons.com \ --cc=jason@lakedaemon.net \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.