All of lore.kernel.org
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime.ripard@free-electrons.com>
To: Gregory Clement <gregory.clement@free-electrons.com>,
	Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
	Ezequiel Garcia <ezequiel.garcia@free-electrons.com>,
	Brian Norris <computersforpeace@gmail.com>
Cc: linux-mtd@lists.infradead.org,
	Boris Brezillon <boris@free-electrons.com>,
	Thomas Petazzoni <thomas@free-electrons.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Tawfik Bayouk <tawfik@marvell.com>,
	Nadav Haklai <nadavh@marvell.com>,
	Lior Amsalem <alior@marvell.com>,
	Sudhakar Gundubogula <sudhakar@marvell.com>,
	Seif Mazareeb <seif@marvell.com>,
	Maxime Ripard <maxime.ripard@free-electrons.com>
Subject: [PATCH v4 2/2] ARM: mvebu: a385-db-ap: Enable the NAND
Date: Wed, 18 Feb 2015 11:32:08 +0100	[thread overview]
Message-ID: <1424255528-1717-3-git-send-email-maxime.ripard@free-electrons.com> (raw)
In-Reply-To: <1424255528-1717-1-git-send-email-maxime.ripard@free-electrons.com>

The Armada 385 Access Point Development Board has a 1GB NAND SLC chip from
Micron as its main storage. Enable it.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 arch/arm/boot/dts/armada-385-db-ap.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts
index b891b4c897f5..ee648fb19075 100644
--- a/arch/arm/boot/dts/armada-385-db-ap.dts
+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
@@ -130,6 +130,19 @@
 				phy-mode = "rgmii-id";
 			};
 
+			nfc: flash@d0000 {
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				num-cs = <1>;
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+			};
+
 			usb3@f0000 {
 				status = "okay";
 				usb-phy = <&usb3_phy>;
-- 
2.3.0


WARNING: multiple messages have this Message-ID (diff)
From: Maxime Ripard <maxime.ripard@free-electrons.com>
To: Gregory Clement <gregory.clement@free-electrons.com>,
	Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
	Ezequiel Garcia <ezequiel.garcia@free-electrons.com>,
	Brian Norris <computersforpeace@gmail.com>
Cc: Lior Amsalem <alior@marvell.com>,
	Tawfik Bayouk <tawfik@marvell.com>,
	Thomas Petazzoni <thomas@free-electrons.com>,
	Seif Mazareeb <seif@marvell.com>,
	linux-kernel@vger.kernel.org,
	Sudhakar Gundubogula <sudhakar@marvell.com>,
	Nadav Haklai <nadavh@marvell.com>,
	Boris Brezillon <boris@free-electrons.com>,
	linux-mtd@lists.infradead.org,
	Maxime Ripard <maxime.ripard@free-electrons.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 2/2] ARM: mvebu: a385-db-ap: Enable the NAND
Date: Wed, 18 Feb 2015 11:32:08 +0100	[thread overview]
Message-ID: <1424255528-1717-3-git-send-email-maxime.ripard@free-electrons.com> (raw)
In-Reply-To: <1424255528-1717-1-git-send-email-maxime.ripard@free-electrons.com>

The Armada 385 Access Point Development Board has a 1GB NAND SLC chip from
Micron as its main storage. Enable it.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 arch/arm/boot/dts/armada-385-db-ap.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts
index b891b4c897f5..ee648fb19075 100644
--- a/arch/arm/boot/dts/armada-385-db-ap.dts
+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
@@ -130,6 +130,19 @@
 				phy-mode = "rgmii-id";
 			};
 
+			nfc: flash@d0000 {
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				num-cs = <1>;
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+			};
+
 			usb3@f0000 {
 				status = "okay";
 				usb-phy = <&usb3_phy>;
-- 
2.3.0

WARNING: multiple messages have this Message-ID (diff)
From: maxime.ripard@free-electrons.com (Maxime Ripard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 2/2] ARM: mvebu: a385-db-ap: Enable the NAND
Date: Wed, 18 Feb 2015 11:32:08 +0100	[thread overview]
Message-ID: <1424255528-1717-3-git-send-email-maxime.ripard@free-electrons.com> (raw)
In-Reply-To: <1424255528-1717-1-git-send-email-maxime.ripard@free-electrons.com>

The Armada 385 Access Point Development Board has a 1GB NAND SLC chip from
Micron as its main storage. Enable it.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 arch/arm/boot/dts/armada-385-db-ap.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts
index b891b4c897f5..ee648fb19075 100644
--- a/arch/arm/boot/dts/armada-385-db-ap.dts
+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
@@ -130,6 +130,19 @@
 				phy-mode = "rgmii-id";
 			};
 
+			nfc: flash at d0000 {
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				num-cs = <1>;
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+			};
+
 			usb3 at f0000 {
 				status = "okay";
 				usb-phy = <&usb3_phy>;
-- 
2.3.0

  parent reply	other threads:[~2015-02-18 10:35 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-18 10:32 [PATCH v4 0/2] ARM: mvebu: a385-db-ap: Enable the NAND controller Maxime Ripard
2015-02-18 10:32 ` Maxime Ripard
2015-02-18 10:32 ` Maxime Ripard
2015-02-18 10:32 ` [PATCH v4 1/2] mtd: nand: pxa3xx: Fix PIO FIFO draining Maxime Ripard
2015-02-18 10:32   ` Maxime Ripard
2015-02-18 10:32   ` Maxime Ripard
2015-02-18 12:52   ` Boris Brezillon
2015-02-18 12:52     ` Boris Brezillon
2015-02-18 12:52     ` Boris Brezillon
2015-02-18 13:40   ` Ezequiel Garcia
2015-02-18 13:40     ` Ezequiel Garcia
2015-02-18 13:40     ` Ezequiel Garcia
2015-02-18 13:40     ` Ezequiel Garcia
2015-02-18 14:01     ` Maxime Ripard
2015-02-18 14:01       ` Maxime Ripard
2015-02-18 14:01       ` Maxime Ripard
2015-02-18 14:06       ` Ezequiel Garcia
2015-02-18 14:06         ` Ezequiel Garcia
2015-02-18 14:06         ` Ezequiel Garcia
2015-02-18 14:06         ` Ezequiel Garcia
2015-02-28  9:01   ` Brian Norris
2015-02-28  9:01     ` Brian Norris
2015-02-28  9:01     ` Brian Norris
2015-03-02 16:52     ` Gregory CLEMENT
2015-03-02 16:52       ` Gregory CLEMENT
2015-03-02 16:52       ` Gregory CLEMENT
2015-02-18 10:32 ` Maxime Ripard [this message]
2015-02-18 10:32   ` [PATCH v4 2/2] ARM: mvebu: a385-db-ap: Enable the NAND Maxime Ripard
2015-02-18 10:32   ` Maxime Ripard
2015-03-03  8:10   ` Gregory CLEMENT
2015-03-03  8:10     ` Gregory CLEMENT
2015-03-03  8:10     ` Gregory CLEMENT
2015-03-03  9:57     ` Maxime Ripard
2015-03-03  9:57       ` Maxime Ripard
2015-03-03  9:57       ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1424255528-1717-3-git-send-email-maxime.ripard@free-electrons.com \
    --to=maxime.ripard@free-electrons.com \
    --cc=alior@marvell.com \
    --cc=andrew@lunn.ch \
    --cc=boris@free-electrons.com \
    --cc=computersforpeace@gmail.com \
    --cc=ezequiel.garcia@free-electrons.com \
    --cc=gregory.clement@free-electrons.com \
    --cc=jason@lakedaemon.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=nadavh@marvell.com \
    --cc=sebastian.hesselbarth@gmail.com \
    --cc=seif@marvell.com \
    --cc=sudhakar@marvell.com \
    --cc=tawfik@marvell.com \
    --cc=thomas@free-electrons.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.