All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lee Jones <lee.jones@linaro.org>
To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: lee.jones@linaro.org, kernel@stlinux.com,
	rtc-linux@googlegroups.com, wim@iguana.be,
	linux-watchdog@vger.kernel.org, devicetree@vger.kernel.org,
	linux@roeck-us.net, david.paris@st.com
Subject: [PATCH v3 7/8] rtc: st: add new driver for ST's LPC RTC
Date: Wed, 18 Feb 2015 11:49:13 +0000	[thread overview]
Message-ID: <1424260154-12868-8-git-send-email-lee.jones@linaro.org> (raw)
In-Reply-To: <1424260154-12868-1-git-send-email-lee.jones@linaro.org>

ST's Low Power Controller (LPC) controls two devices; watchdog and RTC.
Only one of the devices can be used at any one time.  This is enforced
by the correlating MFD driver.  This portion of the driver-set controls
the Real Time Clock.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/rtc/Kconfig      |  12 ++
 drivers/rtc/Makefile     |   1 +
 drivers/rtc/rtc-st-lpc.c | 354 +++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 367 insertions(+)
 create mode 100644 drivers/rtc/rtc-st-lpc.c

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index f15cddf..ca509e8 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1417,6 +1417,18 @@ config RTC_DRV_SIRFSOC
 	  Say "yes" here to support the real time clock on SiRF SOC chips.
 	  This driver can also be built as a module called rtc-sirfsoc.
 
+config RTC_DRV_ST_LPC
+	tristate "STMicroelectronics LPC RTC"
+	depends on ARCH_STI
+	depends on OF
+	select MFD_ST_LPC
+	help
+	  Say Y here to include STMicroelectronics Low Power Controller
+	  (LPC) based RTC support.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rtc-st-lpc.
+
 config RTC_DRV_MOXART
 	tristate "MOXA ART RTC"
 	depends on ARCH_MOXART || COMPILE_TEST
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index c8ef3e1..6dbb7d9 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -149,4 +149,5 @@ obj-$(CONFIG_RTC_DRV_WM8350)	+= rtc-wm8350.o
 obj-$(CONFIG_RTC_DRV_X1205)	+= rtc-x1205.o
 obj-$(CONFIG_RTC_DRV_XGENE)	+= rtc-xgene.o
 obj-$(CONFIG_RTC_DRV_SIRFSOC)	+= rtc-sirfsoc.o
+obj-$(CONFIG_RTC_DRV_ST_LPC)	+= rtc-st-lpc.o
 obj-$(CONFIG_RTC_DRV_MOXART)	+= rtc-moxart.o
diff --git a/drivers/rtc/rtc-st-lpc.c b/drivers/rtc/rtc-st-lpc.c
new file mode 100644
index 0000000..f1344ac
--- /dev/null
+++ b/drivers/rtc/rtc-st-lpc.c
@@ -0,0 +1,354 @@
+/*
+ * rtc-st-lpc.c - ST's LPC RTC, powered by the Low Power Timer
+ *
+ * Copyright (C) 2014 STMicroelectronics Limited
+ *
+ * Author: David Paris <david.paris@st.com> for STMicroelectronics
+ *         Lee Jones <lee.jones@linaro.org> for STMicroelectronics
+ *
+ * Based on the original driver written by Stuart Menefy.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+
+#include <dt-bindings/mfd/st-lpc.h>
+
+/* Low Power Timer */
+#define LPC_LPT_LSB_OFF		0x400
+#define LPC_LPT_MSB_OFF		0x404
+#define LPC_LPT_START_OFF	0x408
+
+/* Low Power Alarm */
+#define LPC_LPA_LSB_OFF		0x410
+#define LPC_LPA_MSB_OFF		0x414
+#define LPC_LPA_START_OFF	0x418
+
+/* LPC as WDT */
+#define LPC_WDT_OFF		0x510
+#define LPC_WDT_FLAG_OFF	0x514
+
+struct st_rtc {
+	struct rtc_device *rtc_dev;
+	struct rtc_wkalrm alarm;
+	struct resource *res;
+	struct clk *clk;
+	unsigned long clkrate;
+	void __iomem *ioaddr;
+	bool irq_enabled:1;
+	spinlock_t lock;
+	short irq;
+};
+
+static void st_rtc_set_hw_alarm(struct st_rtc *rtc,
+				unsigned long msb, unsigned long  lsb)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&rtc->lock, flags);
+
+	writel(1, rtc->ioaddr + LPC_WDT_OFF);
+
+	writel(msb, rtc->ioaddr + LPC_LPA_MSB_OFF);
+	writel(lsb, rtc->ioaddr + LPC_LPA_LSB_OFF);
+	writel(1, rtc->ioaddr + LPC_LPA_START_OFF);
+
+	writel(0, rtc->ioaddr + LPC_WDT_OFF);
+
+	spin_unlock_irqrestore(&rtc->lock, flags);
+}
+
+static irqreturn_t st_rtc_handler(int this_irq, void *data)
+{
+	struct st_rtc *rtc = (struct st_rtc *)data;
+
+	rtc_update_irq(rtc->rtc_dev, 1, RTC_AF);
+
+	return IRQ_HANDLED;
+}
+
+static int st_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct st_rtc *rtc = dev_get_drvdata(dev);
+	unsigned long lpt_lsb, lpt_msb;
+	unsigned long long lpt;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rtc->lock, flags);
+
+	do {
+		lpt_msb = readl(rtc->ioaddr + LPC_LPT_MSB_OFF);
+		lpt_lsb = readl(rtc->ioaddr + LPC_LPT_LSB_OFF);
+	} while (readl(rtc->ioaddr + LPC_LPT_MSB_OFF) != lpt_msb);
+
+	spin_unlock_irqrestore(&rtc->lock, flags);
+
+	lpt = ((unsigned long long)lpt_msb << 32) | lpt_lsb;
+	do_div(lpt, rtc->clkrate);
+	rtc_time_to_tm(lpt, tm);
+
+	return 0;
+}
+
+static int st_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct st_rtc *rtc = dev_get_drvdata(dev);
+	unsigned long long lpt;
+	unsigned long secs, flags;
+	int ret;
+
+	ret = rtc_tm_to_time(tm, &secs);
+	if (ret)
+		return ret;
+
+	lpt = (unsigned long long)secs * rtc->clkrate;
+
+	spin_lock_irqsave(&rtc->lock, flags);
+
+	writel(lpt >> 32, rtc->ioaddr + LPC_LPT_MSB_OFF);
+	writel(lpt, rtc->ioaddr + LPC_LPT_LSB_OFF);
+	writel(1, rtc->ioaddr + LPC_LPT_START_OFF);
+
+	spin_unlock_irqrestore(&rtc->lock, flags);
+
+	return 0;
+}
+
+static int st_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *wkalrm)
+{
+	struct st_rtc *rtc = dev_get_drvdata(dev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&rtc->lock, flags);
+
+	memcpy(wkalrm, &rtc->alarm, sizeof(struct rtc_wkalrm));
+
+	spin_unlock_irqrestore(&rtc->lock, flags);
+
+	return 0;
+}
+
+static int st_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct st_rtc *rtc = dev_get_drvdata(dev);
+
+	if (enabled && !rtc->irq_enabled) {
+		enable_irq(rtc->irq);
+		rtc->irq_enabled = true;
+	} else if (!enabled && rtc->irq_enabled) {
+		disable_irq(rtc->irq);
+		rtc->irq_enabled = false;
+	}
+
+	return 0;
+}
+
+static int st_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+	struct st_rtc *rtc = dev_get_drvdata(dev);
+	struct rtc_time now;
+	unsigned long now_secs;
+	unsigned long alarm_secs;
+	unsigned long long lpa;
+
+	st_rtc_read_time(dev, &now);
+	rtc_tm_to_time(&now, &now_secs);
+	rtc_tm_to_time(&t->time, &alarm_secs);
+
+	/* Invalid alarm time */
+	if (now_secs > alarm_secs)
+		return -EINVAL;
+
+	memcpy(&rtc->alarm, t, sizeof(struct rtc_wkalrm));
+
+	/* Now many secs to fire */
+	alarm_secs -= now_secs;
+	lpa = (unsigned long long)alarm_secs * rtc->clkrate;
+
+	st_rtc_set_hw_alarm(rtc, lpa >> 32, lpa);
+	st_rtc_alarm_irq_enable(dev, t->enabled);
+
+	return 0;
+}
+
+static struct rtc_class_ops st_rtc_ops = {
+	.read_time		= st_rtc_read_time,
+	.set_time		= st_rtc_set_time,
+	.read_alarm		= st_rtc_read_alarm,
+	.set_alarm		= st_rtc_set_alarm,
+	.alarm_irq_enable	= st_rtc_alarm_irq_enable,
+};
+
+static int st_rtc_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct st_rtc *rtc;
+	struct resource *res;
+	struct rtc_time tm_check;
+	uint32_t mode;
+	int ret = 0;
+
+	ret = of_property_read_u32(np, "st,lpc-mode", &mode);
+	if (ret) {
+		dev_err(&pdev->dev, "An LPC mode must be provided\n");
+		return -EINVAL;
+	}
+
+	/* LPC can either run in RTC or WDT mode */
+	if (mode != ST_LPC_MODE_RTC)
+		return -ENODEV;
+
+	rtc = devm_kzalloc(&pdev->dev, sizeof(struct st_rtc), GFP_KERNEL);
+	if (!rtc)
+		return -ENOMEM;
+
+	spin_lock_init(&rtc->lock);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	rtc->ioaddr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(rtc->ioaddr))
+		return PTR_ERR(rtc->ioaddr);
+
+	rtc->irq = irq_of_parse_and_map(np, 0);
+	if (!rtc->irq) {
+		dev_err(&pdev->dev, "IRQ missing or invalid\n");
+		return -EINVAL;
+	}
+
+	ret = devm_request_irq(&pdev->dev, rtc->irq, st_rtc_handler, 0,
+			       pdev->name, rtc);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to request irq %i\n", rtc->irq);
+		return ret;
+	}
+
+	enable_irq_wake(rtc->irq);
+	disable_irq(rtc->irq);
+
+	rtc->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(rtc->clk)) {
+		dev_err(&pdev->dev, "Unable to request clock\n");
+		return PTR_ERR(rtc->clk);
+	}
+
+	clk_prepare_enable(rtc->clk);
+
+	rtc->clkrate = clk_get_rate(rtc->clk);
+	if (!rtc->clkrate) {
+		dev_err(&pdev->dev, "Unable to fetch clock rate\n");
+		return -EINVAL;
+	}
+
+	device_set_wakeup_capable(&pdev->dev, 1);
+
+	platform_set_drvdata(pdev, rtc);
+
+	/*
+	 * The RTC-LPC is able to manage date.year > 2038
+	 * but currently the kernel can not manage this date!
+	 * If the RTC-LPC has a date.year > 2038 then
+	 * it's set to the epoch "Jan 1st 2000"
+	 */
+	st_rtc_read_time(&pdev->dev, &tm_check);
+
+	if (tm_check.tm_year >=  (2038 - 1900)) {
+		memset(&tm_check, 0, sizeof(tm_check));
+		tm_check.tm_year = 100;
+		tm_check.tm_mday = 1;
+		st_rtc_set_time(&pdev->dev, &tm_check);
+	}
+
+	rtc->rtc_dev = rtc_device_register("st-lpc-rtc", &pdev->dev,
+					   &st_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc->rtc_dev)) {
+		clk_disable_unprepare(rtc->clk);
+		return PTR_ERR(rtc->rtc_dev);
+	}
+
+	return 0;
+}
+
+static int st_rtc_remove(struct platform_device *pdev)
+{
+	struct st_rtc *rtc = platform_get_drvdata(pdev);
+
+	if (likely(rtc->rtc_dev))
+		rtc_device_unregister(rtc->rtc_dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int st_rtc_suspend(struct device *dev)
+{
+	struct st_rtc *rtc = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		return 0;
+
+	writel(1, rtc->ioaddr + LPC_WDT_OFF);
+	writel(0, rtc->ioaddr + LPC_LPA_START_OFF);
+	writel(0, rtc->ioaddr + LPC_WDT_OFF);
+
+	return 0;
+}
+
+static int st_rtc_resume(struct device *dev)
+{
+	struct st_rtc *rtc = dev_get_drvdata(dev);
+
+	rtc_alarm_irq_enable(rtc->rtc_dev, 0);
+
+	/*
+	 * clean 'rtc->alarm' to allow a new
+	 * .set_alarm to the upper RTC layer
+	 */
+	memset(&rtc->alarm, 0, sizeof(struct rtc_wkalrm));
+
+	writel(0, rtc->ioaddr + LPC_LPA_MSB_OFF);
+	writel(0, rtc->ioaddr + LPC_LPA_LSB_OFF);
+	writel(1, rtc->ioaddr + LPC_WDT_OFF);
+	writel(1, rtc->ioaddr + LPC_LPA_START_OFF);
+	writel(0, rtc->ioaddr + LPC_WDT_OFF);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(st_rtc_pm_ops, st_rtc_suspend, st_rtc_resume);
+
+static struct of_device_id st_rtc_match[] = {
+	{ .compatible = "st,stih407-lpc" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, st_wdog_match);
+
+static struct platform_driver st_rtc_platform_driver = {
+	.driver = {
+		.name = "st-lpc-rtc",
+		.pm = &st_rtc_pm_ops,
+		.of_match_table = st_rtc_match,
+	},
+	.probe = st_rtc_probe,
+	.remove = st_rtc_remove,
+};
+
+module_platform_driver(st_rtc_platform_driver);
+
+MODULE_DESCRIPTION("STMicroelectronics LPC RTC driver");
+MODULE_AUTHOR("David Paris <david.paris@st.com>");
+MODULE_LICENSE("GPLv2");
-- 
1.9.1


WARNING: multiple messages have this Message-ID (diff)
From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 7/8] rtc: st: add new driver for ST's LPC RTC
Date: Wed, 18 Feb 2015 11:49:13 +0000	[thread overview]
Message-ID: <1424260154-12868-8-git-send-email-lee.jones@linaro.org> (raw)
In-Reply-To: <1424260154-12868-1-git-send-email-lee.jones@linaro.org>

ST's Low Power Controller (LPC) controls two devices; watchdog and RTC.
Only one of the devices can be used at any one time.  This is enforced
by the correlating MFD driver.  This portion of the driver-set controls
the Real Time Clock.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/rtc/Kconfig      |  12 ++
 drivers/rtc/Makefile     |   1 +
 drivers/rtc/rtc-st-lpc.c | 354 +++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 367 insertions(+)
 create mode 100644 drivers/rtc/rtc-st-lpc.c

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index f15cddf..ca509e8 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1417,6 +1417,18 @@ config RTC_DRV_SIRFSOC
 	  Say "yes" here to support the real time clock on SiRF SOC chips.
 	  This driver can also be built as a module called rtc-sirfsoc.
 
+config RTC_DRV_ST_LPC
+	tristate "STMicroelectronics LPC RTC"
+	depends on ARCH_STI
+	depends on OF
+	select MFD_ST_LPC
+	help
+	  Say Y here to include STMicroelectronics Low Power Controller
+	  (LPC) based RTC support.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rtc-st-lpc.
+
 config RTC_DRV_MOXART
 	tristate "MOXA ART RTC"
 	depends on ARCH_MOXART || COMPILE_TEST
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index c8ef3e1..6dbb7d9 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -149,4 +149,5 @@ obj-$(CONFIG_RTC_DRV_WM8350)	+= rtc-wm8350.o
 obj-$(CONFIG_RTC_DRV_X1205)	+= rtc-x1205.o
 obj-$(CONFIG_RTC_DRV_XGENE)	+= rtc-xgene.o
 obj-$(CONFIG_RTC_DRV_SIRFSOC)	+= rtc-sirfsoc.o
+obj-$(CONFIG_RTC_DRV_ST_LPC)	+= rtc-st-lpc.o
 obj-$(CONFIG_RTC_DRV_MOXART)	+= rtc-moxart.o
diff --git a/drivers/rtc/rtc-st-lpc.c b/drivers/rtc/rtc-st-lpc.c
new file mode 100644
index 0000000..f1344ac
--- /dev/null
+++ b/drivers/rtc/rtc-st-lpc.c
@@ -0,0 +1,354 @@
+/*
+ * rtc-st-lpc.c - ST's LPC RTC, powered by the Low Power Timer
+ *
+ * Copyright (C) 2014 STMicroelectronics Limited
+ *
+ * Author: David Paris <david.paris@st.com> for STMicroelectronics
+ *         Lee Jones <lee.jones@linaro.org> for STMicroelectronics
+ *
+ * Based on the original driver written by Stuart Menefy.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+
+#include <dt-bindings/mfd/st-lpc.h>
+
+/* Low Power Timer */
+#define LPC_LPT_LSB_OFF		0x400
+#define LPC_LPT_MSB_OFF		0x404
+#define LPC_LPT_START_OFF	0x408
+
+/* Low Power Alarm */
+#define LPC_LPA_LSB_OFF		0x410
+#define LPC_LPA_MSB_OFF		0x414
+#define LPC_LPA_START_OFF	0x418
+
+/* LPC as WDT */
+#define LPC_WDT_OFF		0x510
+#define LPC_WDT_FLAG_OFF	0x514
+
+struct st_rtc {
+	struct rtc_device *rtc_dev;
+	struct rtc_wkalrm alarm;
+	struct resource *res;
+	struct clk *clk;
+	unsigned long clkrate;
+	void __iomem *ioaddr;
+	bool irq_enabled:1;
+	spinlock_t lock;
+	short irq;
+};
+
+static void st_rtc_set_hw_alarm(struct st_rtc *rtc,
+				unsigned long msb, unsigned long  lsb)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&rtc->lock, flags);
+
+	writel(1, rtc->ioaddr + LPC_WDT_OFF);
+
+	writel(msb, rtc->ioaddr + LPC_LPA_MSB_OFF);
+	writel(lsb, rtc->ioaddr + LPC_LPA_LSB_OFF);
+	writel(1, rtc->ioaddr + LPC_LPA_START_OFF);
+
+	writel(0, rtc->ioaddr + LPC_WDT_OFF);
+
+	spin_unlock_irqrestore(&rtc->lock, flags);
+}
+
+static irqreturn_t st_rtc_handler(int this_irq, void *data)
+{
+	struct st_rtc *rtc = (struct st_rtc *)data;
+
+	rtc_update_irq(rtc->rtc_dev, 1, RTC_AF);
+
+	return IRQ_HANDLED;
+}
+
+static int st_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct st_rtc *rtc = dev_get_drvdata(dev);
+	unsigned long lpt_lsb, lpt_msb;
+	unsigned long long lpt;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rtc->lock, flags);
+
+	do {
+		lpt_msb = readl(rtc->ioaddr + LPC_LPT_MSB_OFF);
+		lpt_lsb = readl(rtc->ioaddr + LPC_LPT_LSB_OFF);
+	} while (readl(rtc->ioaddr + LPC_LPT_MSB_OFF) != lpt_msb);
+
+	spin_unlock_irqrestore(&rtc->lock, flags);
+
+	lpt = ((unsigned long long)lpt_msb << 32) | lpt_lsb;
+	do_div(lpt, rtc->clkrate);
+	rtc_time_to_tm(lpt, tm);
+
+	return 0;
+}
+
+static int st_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct st_rtc *rtc = dev_get_drvdata(dev);
+	unsigned long long lpt;
+	unsigned long secs, flags;
+	int ret;
+
+	ret = rtc_tm_to_time(tm, &secs);
+	if (ret)
+		return ret;
+
+	lpt = (unsigned long long)secs * rtc->clkrate;
+
+	spin_lock_irqsave(&rtc->lock, flags);
+
+	writel(lpt >> 32, rtc->ioaddr + LPC_LPT_MSB_OFF);
+	writel(lpt, rtc->ioaddr + LPC_LPT_LSB_OFF);
+	writel(1, rtc->ioaddr + LPC_LPT_START_OFF);
+
+	spin_unlock_irqrestore(&rtc->lock, flags);
+
+	return 0;
+}
+
+static int st_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *wkalrm)
+{
+	struct st_rtc *rtc = dev_get_drvdata(dev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&rtc->lock, flags);
+
+	memcpy(wkalrm, &rtc->alarm, sizeof(struct rtc_wkalrm));
+
+	spin_unlock_irqrestore(&rtc->lock, flags);
+
+	return 0;
+}
+
+static int st_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct st_rtc *rtc = dev_get_drvdata(dev);
+
+	if (enabled && !rtc->irq_enabled) {
+		enable_irq(rtc->irq);
+		rtc->irq_enabled = true;
+	} else if (!enabled && rtc->irq_enabled) {
+		disable_irq(rtc->irq);
+		rtc->irq_enabled = false;
+	}
+
+	return 0;
+}
+
+static int st_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+	struct st_rtc *rtc = dev_get_drvdata(dev);
+	struct rtc_time now;
+	unsigned long now_secs;
+	unsigned long alarm_secs;
+	unsigned long long lpa;
+
+	st_rtc_read_time(dev, &now);
+	rtc_tm_to_time(&now, &now_secs);
+	rtc_tm_to_time(&t->time, &alarm_secs);
+
+	/* Invalid alarm time */
+	if (now_secs > alarm_secs)
+		return -EINVAL;
+
+	memcpy(&rtc->alarm, t, sizeof(struct rtc_wkalrm));
+
+	/* Now many secs to fire */
+	alarm_secs -= now_secs;
+	lpa = (unsigned long long)alarm_secs * rtc->clkrate;
+
+	st_rtc_set_hw_alarm(rtc, lpa >> 32, lpa);
+	st_rtc_alarm_irq_enable(dev, t->enabled);
+
+	return 0;
+}
+
+static struct rtc_class_ops st_rtc_ops = {
+	.read_time		= st_rtc_read_time,
+	.set_time		= st_rtc_set_time,
+	.read_alarm		= st_rtc_read_alarm,
+	.set_alarm		= st_rtc_set_alarm,
+	.alarm_irq_enable	= st_rtc_alarm_irq_enable,
+};
+
+static int st_rtc_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct st_rtc *rtc;
+	struct resource *res;
+	struct rtc_time tm_check;
+	uint32_t mode;
+	int ret = 0;
+
+	ret = of_property_read_u32(np, "st,lpc-mode", &mode);
+	if (ret) {
+		dev_err(&pdev->dev, "An LPC mode must be provided\n");
+		return -EINVAL;
+	}
+
+	/* LPC can either run in RTC or WDT mode */
+	if (mode != ST_LPC_MODE_RTC)
+		return -ENODEV;
+
+	rtc = devm_kzalloc(&pdev->dev, sizeof(struct st_rtc), GFP_KERNEL);
+	if (!rtc)
+		return -ENOMEM;
+
+	spin_lock_init(&rtc->lock);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	rtc->ioaddr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(rtc->ioaddr))
+		return PTR_ERR(rtc->ioaddr);
+
+	rtc->irq = irq_of_parse_and_map(np, 0);
+	if (!rtc->irq) {
+		dev_err(&pdev->dev, "IRQ missing or invalid\n");
+		return -EINVAL;
+	}
+
+	ret = devm_request_irq(&pdev->dev, rtc->irq, st_rtc_handler, 0,
+			       pdev->name, rtc);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to request irq %i\n", rtc->irq);
+		return ret;
+	}
+
+	enable_irq_wake(rtc->irq);
+	disable_irq(rtc->irq);
+
+	rtc->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(rtc->clk)) {
+		dev_err(&pdev->dev, "Unable to request clock\n");
+		return PTR_ERR(rtc->clk);
+	}
+
+	clk_prepare_enable(rtc->clk);
+
+	rtc->clkrate = clk_get_rate(rtc->clk);
+	if (!rtc->clkrate) {
+		dev_err(&pdev->dev, "Unable to fetch clock rate\n");
+		return -EINVAL;
+	}
+
+	device_set_wakeup_capable(&pdev->dev, 1);
+
+	platform_set_drvdata(pdev, rtc);
+
+	/*
+	 * The RTC-LPC is able to manage date.year > 2038
+	 * but currently the kernel can not manage this date!
+	 * If the RTC-LPC has a date.year > 2038 then
+	 * it's set to the epoch "Jan 1st 2000"
+	 */
+	st_rtc_read_time(&pdev->dev, &tm_check);
+
+	if (tm_check.tm_year >=  (2038 - 1900)) {
+		memset(&tm_check, 0, sizeof(tm_check));
+		tm_check.tm_year = 100;
+		tm_check.tm_mday = 1;
+		st_rtc_set_time(&pdev->dev, &tm_check);
+	}
+
+	rtc->rtc_dev = rtc_device_register("st-lpc-rtc", &pdev->dev,
+					   &st_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc->rtc_dev)) {
+		clk_disable_unprepare(rtc->clk);
+		return PTR_ERR(rtc->rtc_dev);
+	}
+
+	return 0;
+}
+
+static int st_rtc_remove(struct platform_device *pdev)
+{
+	struct st_rtc *rtc = platform_get_drvdata(pdev);
+
+	if (likely(rtc->rtc_dev))
+		rtc_device_unregister(rtc->rtc_dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int st_rtc_suspend(struct device *dev)
+{
+	struct st_rtc *rtc = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		return 0;
+
+	writel(1, rtc->ioaddr + LPC_WDT_OFF);
+	writel(0, rtc->ioaddr + LPC_LPA_START_OFF);
+	writel(0, rtc->ioaddr + LPC_WDT_OFF);
+
+	return 0;
+}
+
+static int st_rtc_resume(struct device *dev)
+{
+	struct st_rtc *rtc = dev_get_drvdata(dev);
+
+	rtc_alarm_irq_enable(rtc->rtc_dev, 0);
+
+	/*
+	 * clean 'rtc->alarm' to allow a new
+	 * .set_alarm to the upper RTC layer
+	 */
+	memset(&rtc->alarm, 0, sizeof(struct rtc_wkalrm));
+
+	writel(0, rtc->ioaddr + LPC_LPA_MSB_OFF);
+	writel(0, rtc->ioaddr + LPC_LPA_LSB_OFF);
+	writel(1, rtc->ioaddr + LPC_WDT_OFF);
+	writel(1, rtc->ioaddr + LPC_LPA_START_OFF);
+	writel(0, rtc->ioaddr + LPC_WDT_OFF);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(st_rtc_pm_ops, st_rtc_suspend, st_rtc_resume);
+
+static struct of_device_id st_rtc_match[] = {
+	{ .compatible = "st,stih407-lpc" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, st_wdog_match);
+
+static struct platform_driver st_rtc_platform_driver = {
+	.driver = {
+		.name = "st-lpc-rtc",
+		.pm = &st_rtc_pm_ops,
+		.of_match_table = st_rtc_match,
+	},
+	.probe = st_rtc_probe,
+	.remove = st_rtc_remove,
+};
+
+module_platform_driver(st_rtc_platform_driver);
+
+MODULE_DESCRIPTION("STMicroelectronics LPC RTC driver");
+MODULE_AUTHOR("David Paris <david.paris@st.com>");
+MODULE_LICENSE("GPLv2");
-- 
1.9.1

  parent reply	other threads:[~2015-02-18 11:50 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-18 11:49 [PATCH v3 0/8] mfd: watchdog: rtc: New driver for ST's LPC IP Lee Jones
2015-02-18 11:49 ` Lee Jones
2015-02-18 11:49 ` Lee Jones
2015-02-18 11:49 ` [PATCH v3 1/8] ARM: multi_v7_defconfig: Enable support for ST's LPC Watchdog Lee Jones
2015-02-18 11:49   ` Lee Jones
2015-02-18 11:49 ` [PATCH v3 2/8] ARM: multi_v7_defconfig: Enable support for ST's LPC RTC Lee Jones
2015-02-18 11:49   ` Lee Jones
2015-02-18 11:49   ` Lee Jones
2015-02-18 11:49 ` [PATCH v3 3/8] ARM: STi: DT: STiH407: Add Device Tree node for the LPC Lee Jones
2015-02-18 11:49   ` Lee Jones
2015-02-18 11:49 ` [PATCH v3 4/8] watchdog: bindings: Provide ST bindings for ST's LPC Watchdog device Lee Jones
2015-02-18 11:49   ` Lee Jones
2015-02-18 11:49 ` [PATCH v3 5/8] watchdog: st_wdt: Add new driver for ST's LPC Watchdog Lee Jones
2015-02-18 11:49   ` Lee Jones
2015-02-23 10:25   ` [STLinux Kernel] " Peter Griffin
2015-02-23 10:25     ` Peter Griffin
2015-03-02  7:56     ` Peter Griffin
2015-03-02  7:56       ` Peter Griffin
2015-03-02  7:56       ` Peter Griffin
2015-02-23 19:50   ` [v3,5/8] " Guenter Roeck
2015-02-23 19:50     ` Guenter Roeck
2015-02-18 11:49 ` [PATCH v3 6/8] rtc: bindings: Provide ST bindings for ST's LPC RTC device Lee Jones
2015-02-18 11:49   ` Lee Jones
2015-02-18 11:49   ` Lee Jones
2015-02-18 11:49 ` Lee Jones [this message]
2015-02-18 11:49   ` [PATCH v3 7/8] rtc: st: add new driver for ST's LPC RTC Lee Jones
2015-02-23 10:12   ` [STLinux Kernel] " Peter Griffin
2015-02-23 10:12     ` Peter Griffin
2015-02-23 10:12     ` Peter Griffin
2015-02-25 11:08     ` Lee Jones
2015-02-25 11:08       ` Lee Jones
2015-02-25 11:08       ` Lee Jones
2015-02-25 11:19     ` Russell King - ARM Linux
2015-02-25 11:19       ` Russell King - ARM Linux
2015-02-25 11:19       ` Russell King - ARM Linux
2015-02-25 14:28       ` Peter Griffin
2015-02-25 14:28         ` Peter Griffin
2015-02-18 11:49 ` [PATCH v3 8/8] MAINTAINERS: Add Watchdog and RTC files to STI's maintainer entry Lee Jones
2015-02-18 11:49   ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1424260154-12868-8-git-send-email-lee.jones@linaro.org \
    --to=lee.jones@linaro.org \
    --cc=david.paris@st.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@stlinux.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=rtc-linux@googlegroups.com \
    --cc=wim@iguana.be \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.