From: SenthilKumar Jegadeesan <sjegadee@qti.qualcomm.com>
To: <ath10k@lists.infradead.org>
Cc: <linux-wireless@vger.kernel.org>,
SenthilKumar Jegadeesan <sjegadee@qti.qualcomm.com>
Subject: [PATCH V3 1/2] ath10k: Add abstraction layer for peer flags
Date: Fri, 6 Mar 2015 16:57:49 +0530 [thread overview]
Message-ID: <1425641270-4059-1-git-send-email-sjegadee@qti.qualcomm.com> (raw)
Abstraction layer for peer flags is added to fix
ABI breakage.
Signed-off-by: SenthilKumar Jegadeesan <sjegadee@qti.qualcomm.com>
---
V2:
- "Subject: [PATCH] ath10k: Enable encryption of ADDBA request in PMF" patch
is split into two patches.
patch 1 : Add abstraction layer for peer flags
patch 2 : Enable encryption of ADDBA request in PMF
configuration
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 7cba781..22c4c43 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -145,6 +145,7 @@ struct ath10k_wmi {
struct wmi_vdev_param_map *vdev_param;
struct wmi_pdev_param_map *pdev_param;
const struct wmi_ops *ops;
+ struct wmi_peer_flags_map *peer_flags;
u32 num_mem_chunks;
struct ath10k_mem_chunk mem_chunks[WMI_MAX_MEM_REQS];
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 0f39af7..0c69687 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1369,7 +1369,7 @@ static void ath10k_peer_assoc_h_basic(struct ath10k *ar,
ether_addr_copy(arg->addr, sta->addr);
arg->vdev_id = arvif->vdev_id;
arg->peer_aid = sta->aid;
- arg->peer_flags |= WMI_PEER_AUTH;
+ arg->peer_flags |= arvif->ar->wmi.peer_flags->auth;
arg->peer_listen_intval = ath10k_peer_assoc_h_listen_intval(ar, vif);
arg->peer_num_spatial_streams = 1;
arg->peer_caps = vif->bss_conf.assoc_capability;
@@ -1407,12 +1407,14 @@ static void ath10k_peer_assoc_h_crypto(struct ath10k *ar,
/* FIXME: base on RSN IE/WPA IE is a correct idea? */
if (rsnie || wpaie) {
ath10k_dbg(ar, ATH10K_DBG_WMI, "%s: rsn ie found\n", __func__);
- arg->peer_flags |= WMI_PEER_NEED_PTK_4_WAY;
+ arg->peer_flags |=
+ ar->wmi.peer_flags->need_ptk_4_way;
}
if (wpaie) {
ath10k_dbg(ar, ATH10K_DBG_WMI, "%s: wpa ie found\n", __func__);
- arg->peer_flags |= WMI_PEER_NEED_GTK_2_WAY;
+ arg->peer_flags |=
+ ar->wmi.peer_flags->need_gtk_2_way;
}
}
@@ -1456,7 +1458,7 @@ static void ath10k_peer_assoc_h_ht(struct ath10k *ar,
if (!ht_cap->ht_supported)
return;
- arg->peer_flags |= WMI_PEER_HT;
+ arg->peer_flags |= ar->wmi.peer_flags->ht;
arg->peer_max_mpdu = (1 << (IEEE80211_HT_MAX_AMPDU_FACTOR +
ht_cap->ampdu_factor)) - 1;
@@ -1467,10 +1469,10 @@ static void ath10k_peer_assoc_h_ht(struct ath10k *ar,
arg->peer_rate_caps |= WMI_RC_HT_FLAG;
if (ht_cap->cap & IEEE80211_HT_CAP_LDPC_CODING)
- arg->peer_flags |= WMI_PEER_LDPC;
+ arg->peer_flags |= ar->wmi.peer_flags->ldbc;
if (sta->bandwidth >= IEEE80211_STA_RX_BW_40) {
- arg->peer_flags |= WMI_PEER_40MHZ;
+ arg->peer_flags |= ar->wmi.peer_flags->bw40;
arg->peer_rate_caps |= WMI_RC_CW40_FLAG;
}
@@ -1482,7 +1484,7 @@ static void ath10k_peer_assoc_h_ht(struct ath10k *ar,
if (ht_cap->cap & IEEE80211_HT_CAP_TX_STBC) {
arg->peer_rate_caps |= WMI_RC_TX_STBC_FLAG;
- arg->peer_flags |= WMI_PEER_STBC;
+ arg->peer_flags |= ar->wmi.peer_flags->stbc;
}
if (ht_cap->cap & IEEE80211_HT_CAP_RX_STBC) {
@@ -1490,7 +1492,7 @@ static void ath10k_peer_assoc_h_ht(struct ath10k *ar,
stbc = stbc >> IEEE80211_HT_CAP_RX_STBC_SHIFT;
stbc = stbc << WMI_RC_RX_STBC_FLAG_S;
arg->peer_rate_caps |= stbc;
- arg->peer_flags |= WMI_PEER_STBC;
+ arg->peer_flags |= ar->wmi.peer_flags->stbc;
}
if (ht_cap->mcs.rx_mask[1] && ht_cap->mcs.rx_mask[2])
@@ -1603,10 +1605,10 @@ static void ath10k_peer_assoc_h_vht(struct ath10k *ar,
if (!vht_cap->vht_supported)
return;
- arg->peer_flags |= WMI_PEER_VHT;
+ arg->peer_flags |= ar->wmi.peer_flags->vht;
if (ar->hw->conf.chandef.chan->band == IEEE80211_BAND_2GHZ)
- arg->peer_flags |= WMI_PEER_VHT_2G;
+ arg->peer_flags |= ar->wmi.peer_flags->vht_2g;
arg->peer_vht_caps = vht_cap->cap;
@@ -1623,7 +1625,7 @@ static void ath10k_peer_assoc_h_vht(struct ath10k *ar,
ampdu_factor)) - 1);
if (sta->bandwidth == IEEE80211_STA_RX_BW_80)
- arg->peer_flags |= WMI_PEER_80MHZ;
+ arg->peer_flags |= ar->wmi.peer_flags->bw80;
arg->peer_vht_rates.rx_max_rate =
__le16_to_cpu(vht_cap->vht_mcs.rx_highest);
@@ -1648,27 +1650,32 @@ static void ath10k_peer_assoc_h_qos(struct ath10k *ar,
switch (arvif->vdev_type) {
case WMI_VDEV_TYPE_AP:
if (sta->wme)
- arg->peer_flags |= WMI_PEER_QOS;
+ arg->peer_flags |=
+ arvif->ar->wmi.peer_flags->qos;
if (sta->wme && sta->uapsd_queues) {
- arg->peer_flags |= WMI_PEER_APSD;
+ arg->peer_flags |=
+ arvif->ar->wmi.peer_flags->apsd;
arg->peer_rate_caps |= WMI_RC_UAPSD_FLAG;
}
break;
case WMI_VDEV_TYPE_STA:
if (vif->bss_conf.qos)
- arg->peer_flags |= WMI_PEER_QOS;
+ arg->peer_flags |=
+ arvif->ar->wmi.peer_flags->qos;
break;
case WMI_VDEV_TYPE_IBSS:
if (sta->wme)
- arg->peer_flags |= WMI_PEER_QOS;
+ arg->peer_flags |=
+ arvif->ar->wmi.peer_flags->qos;
break;
default:
break;
}
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac peer %pM qos %d\n",
- sta->addr, !!(arg->peer_flags & WMI_PEER_QOS));
+ sta->addr, !!(arg->peer_flags &
+ arvif->ar->wmi.peer_flags->qos));
}
static bool ath10k_mac_sta_has_11g_rates(struct ieee80211_sta *sta)
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index f34baa0..a99793e 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -2788,6 +2788,25 @@ static const struct wmi_ops wmi_tlv_ops = {
.gen_sta_keepalive = ath10k_wmi_tlv_op_gen_sta_keepalive,
};
+static struct wmi_peer_flags_map wmi_tlv_peer_flags_map = {
+ .auth = WMI_TLV_PEER_AUTH,
+ .qos = WMI_TLV_PEER_QOS,
+ .need_ptk_4_way = WMI_TLV_PEER_NEED_PTK_4_WAY,
+ .need_gtk_2_way = WMI_TLV_PEER_NEED_GTK_2_WAY,
+ .apsd = WMI_TLV_PEER_APSD,
+ .ht = WMI_TLV_PEER_HT,
+ .bw40 = WMI_TLV_PEER_40MHZ,
+ .stbc = WMI_TLV_PEER_STBC,
+ .ldbc = WMI_TLV_PEER_LDPC,
+ .dyn_mimops = WMI_TLV_PEER_DYN_MIMOPS,
+ .static_mimops = WMI_TLV_PEER_STATIC_MIMOPS,
+ .spatial_mux = WMI_TLV_PEER_SPATIAL_MUX,
+ .vht = WMI_TLV_PEER_VHT,
+ .bw80 = WMI_TLV_PEER_80MHZ,
+ .pmf = WMI_TLV_PEER_PMF,
+};
+
+
/************/
/* TLV init */
/************/
@@ -2798,4 +2817,5 @@ void ath10k_wmi_tlv_attach(struct ath10k *ar)
ar->wmi.vdev_param = &wmi_tlv_vdev_param_map;
ar->wmi.pdev_param = &wmi_tlv_pdev_param_map;
ar->wmi.ops = &wmi_tlv_ops;
+ ar->wmi.peer_flags = &wmi_tlv_peer_flags_map;
}
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
index d7a31e1..7159b69 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
@@ -527,6 +527,25 @@ enum wmi_tlv_vdev_param {
WMI_TLV_VDEV_PARAM_IBSS_PS_1RX_CHAIN_IN_ATIM_WINDOW_ENABLE,
};
+enum wmi_tlv_peer_flags {
+
+ WMI_TLV_PEER_AUTH = 0x00000001,
+ WMI_TLV_PEER_QOS = 0x00000002,
+ WMI_TLV_PEER_NEED_PTK_4_WAY = 0x00000004,
+ WMI_TLV_PEER_NEED_GTK_2_WAY = 0x00000010,
+ WMI_TLV_PEER_APSD = 0x00000800,
+ WMI_TLV_PEER_HT = 0x00001000,
+ WMI_TLV_PEER_40MHZ = 0x00002000,
+ WMI_TLV_PEER_STBC = 0x00008000,
+ WMI_TLV_PEER_LDPC = 0x00010000,
+ WMI_TLV_PEER_DYN_MIMOPS = 0x00020000,
+ WMI_TLV_PEER_STATIC_MIMOPS = 0x00040000,
+ WMI_TLV_PEER_SPATIAL_MUX = 0x00200000,
+ WMI_TLV_PEER_VHT = 0x02000000,
+ WMI_TLV_PEER_80MHZ = 0x04000000,
+ WMI_TLV_PEER_PMF = 0x08000000,
+};
+
enum wmi_tlv_tag {
WMI_TLV_TAG_LAST_RESERVED = 15,
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index c7ea77e..6be3726 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -849,6 +849,62 @@ static struct wmi_cmd_map wmi_10_2_cmd_map = {
.pdev_get_temperature_cmdid = WMI_CMD_UNSUPPORTED,
};
+static struct wmi_peer_flags_map wmi_peer_flags_map = {
+ .auth = WMI_PEER_AUTH,
+ .qos = WMI_PEER_QOS,
+ .need_ptk_4_way = WMI_PEER_NEED_PTK_4_WAY,
+ .need_gtk_2_way = WMI_PEER_NEED_GTK_2_WAY,
+ .apsd = WMI_PEER_APSD,
+ .ht = WMI_PEER_HT,
+ .bw40 = WMI_PEER_40MHZ,
+ .stbc = WMI_PEER_STBC,
+ .ldbc = WMI_PEER_LDPC,
+ .dyn_mimops = WMI_PEER_DYN_MIMOPS,
+ .static_mimops = WMI_PEER_STATIC_MIMOPS,
+ .spatial_mux = WMI_PEER_SPATIAL_MUX,
+ .vht = WMI_PEER_VHT,
+ .bw80 = WMI_PEER_80MHZ,
+ .vht_2g = WMI_PEER_VHT_2G,
+ .pmf = WMI_PEER_PMF,
+};
+
+static struct wmi_peer_flags_map wmi_10x_peer_flags_map = {
+ .auth = WMI_10X_PEER_AUTH,
+ .qos = WMI_10X_PEER_QOS,
+ .need_ptk_4_way = WMI_10X_PEER_NEED_PTK_4_WAY,
+ .need_gtk_2_way = WMI_10X_PEER_NEED_GTK_2_WAY,
+ .apsd = WMI_10X_PEER_APSD,
+ .ht = WMI_10X_PEER_HT,
+ .bw40 = WMI_10X_PEER_40MHZ,
+ .stbc = WMI_10X_PEER_STBC,
+ .ldbc = WMI_10X_PEER_LDPC,
+ .dyn_mimops = WMI_10X_PEER_DYN_MIMOPS,
+ .static_mimops = WMI_10X_PEER_STATIC_MIMOPS,
+ .spatial_mux = WMI_10X_PEER_SPATIAL_MUX,
+ .vht = WMI_10X_PEER_VHT,
+ .bw80 = WMI_10X_PEER_80MHZ,
+};
+
+static struct wmi_peer_flags_map wmi_10_2_peer_flags_map = {
+ .auth = WMI_10_2_PEER_AUTH,
+ .qos = WMI_10_2_PEER_QOS,
+ .need_ptk_4_way = WMI_10_2_PEER_NEED_PTK_4_WAY,
+ .need_gtk_2_way = WMI_10_2_PEER_NEED_GTK_2_WAY,
+ .apsd = WMI_10_2_PEER_APSD,
+ .ht = WMI_10_2_PEER_HT,
+ .bw40 = WMI_10_2_PEER_40MHZ,
+ .stbc = WMI_10_2_PEER_STBC,
+ .ldbc = WMI_10_2_PEER_LDPC,
+ .dyn_mimops = WMI_10_2_PEER_DYN_MIMOPS,
+ .static_mimops = WMI_10_2_PEER_STATIC_MIMOPS,
+ .spatial_mux = WMI_10_2_PEER_SPATIAL_MUX,
+ .vht = WMI_10_2_PEER_VHT,
+ .bw80 = WMI_10_2_PEER_80MHZ,
+ .vht_2g = WMI_10_2_PEER_VHT_2G,
+ .pmf = WMI_10_2_PEER_PMF,
+};
+
+
void ath10k_wmi_put_wmi_channel(struct wmi_channel *ch,
const struct wmi_channel_arg *arg)
{
@@ -5462,24 +5518,28 @@ int ath10k_wmi_attach(struct ath10k *ar)
ar->wmi.ops = &wmi_10_2_4_ops;
ar->wmi.vdev_param = &wmi_10_2_4_vdev_param_map;
ar->wmi.pdev_param = &wmi_10_2_4_pdev_param_map;
+ ar->wmi.peer_flags = &wmi_10_2_peer_flags_map;
break;
case ATH10K_FW_WMI_OP_VERSION_10_2:
ar->wmi.cmd = &wmi_10_2_cmd_map;
ar->wmi.ops = &wmi_10_2_ops;
ar->wmi.vdev_param = &wmi_10x_vdev_param_map;
ar->wmi.pdev_param = &wmi_10x_pdev_param_map;
+ ar->wmi.peer_flags = &wmi_10_2_peer_flags_map;
break;
case ATH10K_FW_WMI_OP_VERSION_10_1:
ar->wmi.cmd = &wmi_10x_cmd_map;
ar->wmi.ops = &wmi_10_1_ops;
ar->wmi.vdev_param = &wmi_10x_vdev_param_map;
ar->wmi.pdev_param = &wmi_10x_pdev_param_map;
+ ar->wmi.peer_flags = &wmi_10x_peer_flags_map;
break;
case ATH10K_FW_WMI_OP_VERSION_MAIN:
ar->wmi.cmd = &wmi_cmd_map;
ar->wmi.ops = &wmi_ops;
ar->wmi.vdev_param = &wmi_vdev_param_map;
ar->wmi.pdev_param = &wmi_pdev_param_map;
+ ar->wmi.peer_flags = &wmi_peer_flags_map;
break;
case ATH10K_FW_WMI_OP_VERSION_TLV:
ath10k_wmi_tlv_attach(ar);
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 28c1822..40d5244 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -4509,21 +4509,82 @@ struct wmi_peer_set_q_empty_callback_cmd {
__le32 callback_enable;
} __packed;
-#define WMI_PEER_AUTH 0x00000001
-#define WMI_PEER_QOS 0x00000002
-#define WMI_PEER_NEED_PTK_4_WAY 0x00000004
-#define WMI_PEER_NEED_GTK_2_WAY 0x00000010
-#define WMI_PEER_APSD 0x00000800
-#define WMI_PEER_HT 0x00001000
-#define WMI_PEER_40MHZ 0x00002000
-#define WMI_PEER_STBC 0x00008000
-#define WMI_PEER_LDPC 0x00010000
-#define WMI_PEER_DYN_MIMOPS 0x00020000
-#define WMI_PEER_STATIC_MIMOPS 0x00040000
-#define WMI_PEER_SPATIAL_MUX 0x00200000
-#define WMI_PEER_VHT 0x02000000
-#define WMI_PEER_80MHZ 0x04000000
-#define WMI_PEER_VHT_2G 0x08000000
+struct wmi_peer_flags_map {
+ u32 auth;
+ u32 qos;
+ u32 need_ptk_4_way;
+ u32 need_gtk_2_way;
+ u32 apsd;
+ u32 ht;
+ u32 bw40;
+ u32 stbc;
+ u32 ldbc;
+ u32 dyn_mimops;
+ u32 static_mimops;
+ u32 spatial_mux;
+ u32 vht;
+ u32 bw80;
+ u32 vht_2g;
+ u32 pmf;
+};
+
+enum wmi_peer_flags {
+
+ WMI_PEER_AUTH = 0x00000001,
+ WMI_PEER_QOS = 0x00000002,
+ WMI_PEER_NEED_PTK_4_WAY = 0x00000004,
+ WMI_PEER_NEED_GTK_2_WAY = 0x00000010,
+ WMI_PEER_APSD = 0x00000800,
+ WMI_PEER_HT = 0x00001000,
+ WMI_PEER_40MHZ = 0x00002000,
+ WMI_PEER_STBC = 0x00008000,
+ WMI_PEER_LDPC = 0x00010000,
+ WMI_PEER_DYN_MIMOPS = 0x00020000,
+ WMI_PEER_STATIC_MIMOPS = 0x00040000,
+ WMI_PEER_SPATIAL_MUX = 0x00200000,
+ WMI_PEER_VHT = 0x02000000,
+ WMI_PEER_80MHZ = 0x04000000,
+ WMI_PEER_VHT_2G = 0x08000000,
+ WMI_PEER_PMF = 0x10000000,
+};
+
+enum wmi_10x_peer_flags {
+
+ WMI_10X_PEER_AUTH = 0x00000001,
+ WMI_10X_PEER_QOS = 0x00000002,
+ WMI_10X_PEER_NEED_PTK_4_WAY = 0x00000004,
+ WMI_10X_PEER_NEED_GTK_2_WAY = 0x00000010,
+ WMI_10X_PEER_APSD = 0x00000800,
+ WMI_10X_PEER_HT = 0x00001000,
+ WMI_10X_PEER_40MHZ = 0x00002000,
+ WMI_10X_PEER_STBC = 0x00008000,
+ WMI_10X_PEER_LDPC = 0x00010000,
+ WMI_10X_PEER_DYN_MIMOPS = 0x00020000,
+ WMI_10X_PEER_STATIC_MIMOPS = 0x00040000,
+ WMI_10X_PEER_SPATIAL_MUX = 0x00200000,
+ WMI_10X_PEER_VHT = 0x02000000,
+ WMI_10X_PEER_80MHZ = 0x04000000,
+};
+
+enum wmi_10_2_peer_flags {
+
+ WMI_10_2_PEER_AUTH = 0x00000001,
+ WMI_10_2_PEER_QOS = 0x00000002,
+ WMI_10_2_PEER_NEED_PTK_4_WAY = 0x00000004,
+ WMI_10_2_PEER_NEED_GTK_2_WAY = 0x00000010,
+ WMI_10_2_PEER_APSD = 0x00000800,
+ WMI_10_2_PEER_HT = 0x00001000,
+ WMI_10_2_PEER_40MHZ = 0x00002000,
+ WMI_10_2_PEER_STBC = 0x00008000,
+ WMI_10_2_PEER_LDPC = 0x00010000,
+ WMI_10_2_PEER_DYN_MIMOPS = 0x00020000,
+ WMI_10_2_PEER_STATIC_MIMOPS = 0x00040000,
+ WMI_10_2_PEER_SPATIAL_MUX = 0x00200000,
+ WMI_10_2_PEER_VHT = 0x02000000,
+ WMI_10_2_PEER_80MHZ = 0x04000000,
+ WMI_10_2_PEER_VHT_2G = 0x08000000,
+ WMI_10_2_PEER_PMF = 0x10000000,
+};
/*
* Peer rate capabilities.
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: SenthilKumar Jegadeesan <sjegadee@qti.qualcomm.com>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org,
SenthilKumar Jegadeesan <sjegadee@qti.qualcomm.com>
Subject: [PATCH V3 1/2] ath10k: Add abstraction layer for peer flags
Date: Fri, 6 Mar 2015 16:57:49 +0530 [thread overview]
Message-ID: <1425641270-4059-1-git-send-email-sjegadee@qti.qualcomm.com> (raw)
Abstraction layer for peer flags is added to fix
ABI breakage.
Signed-off-by: SenthilKumar Jegadeesan <sjegadee@qti.qualcomm.com>
---
V2:
- "Subject: [PATCH] ath10k: Enable encryption of ADDBA request in PMF" patch
is split into two patches.
patch 1 : Add abstraction layer for peer flags
patch 2 : Enable encryption of ADDBA request in PMF
configuration
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 7cba781..22c4c43 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -145,6 +145,7 @@ struct ath10k_wmi {
struct wmi_vdev_param_map *vdev_param;
struct wmi_pdev_param_map *pdev_param;
const struct wmi_ops *ops;
+ struct wmi_peer_flags_map *peer_flags;
u32 num_mem_chunks;
struct ath10k_mem_chunk mem_chunks[WMI_MAX_MEM_REQS];
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 0f39af7..0c69687 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1369,7 +1369,7 @@ static void ath10k_peer_assoc_h_basic(struct ath10k *ar,
ether_addr_copy(arg->addr, sta->addr);
arg->vdev_id = arvif->vdev_id;
arg->peer_aid = sta->aid;
- arg->peer_flags |= WMI_PEER_AUTH;
+ arg->peer_flags |= arvif->ar->wmi.peer_flags->auth;
arg->peer_listen_intval = ath10k_peer_assoc_h_listen_intval(ar, vif);
arg->peer_num_spatial_streams = 1;
arg->peer_caps = vif->bss_conf.assoc_capability;
@@ -1407,12 +1407,14 @@ static void ath10k_peer_assoc_h_crypto(struct ath10k *ar,
/* FIXME: base on RSN IE/WPA IE is a correct idea? */
if (rsnie || wpaie) {
ath10k_dbg(ar, ATH10K_DBG_WMI, "%s: rsn ie found\n", __func__);
- arg->peer_flags |= WMI_PEER_NEED_PTK_4_WAY;
+ arg->peer_flags |=
+ ar->wmi.peer_flags->need_ptk_4_way;
}
if (wpaie) {
ath10k_dbg(ar, ATH10K_DBG_WMI, "%s: wpa ie found\n", __func__);
- arg->peer_flags |= WMI_PEER_NEED_GTK_2_WAY;
+ arg->peer_flags |=
+ ar->wmi.peer_flags->need_gtk_2_way;
}
}
@@ -1456,7 +1458,7 @@ static void ath10k_peer_assoc_h_ht(struct ath10k *ar,
if (!ht_cap->ht_supported)
return;
- arg->peer_flags |= WMI_PEER_HT;
+ arg->peer_flags |= ar->wmi.peer_flags->ht;
arg->peer_max_mpdu = (1 << (IEEE80211_HT_MAX_AMPDU_FACTOR +
ht_cap->ampdu_factor)) - 1;
@@ -1467,10 +1469,10 @@ static void ath10k_peer_assoc_h_ht(struct ath10k *ar,
arg->peer_rate_caps |= WMI_RC_HT_FLAG;
if (ht_cap->cap & IEEE80211_HT_CAP_LDPC_CODING)
- arg->peer_flags |= WMI_PEER_LDPC;
+ arg->peer_flags |= ar->wmi.peer_flags->ldbc;
if (sta->bandwidth >= IEEE80211_STA_RX_BW_40) {
- arg->peer_flags |= WMI_PEER_40MHZ;
+ arg->peer_flags |= ar->wmi.peer_flags->bw40;
arg->peer_rate_caps |= WMI_RC_CW40_FLAG;
}
@@ -1482,7 +1484,7 @@ static void ath10k_peer_assoc_h_ht(struct ath10k *ar,
if (ht_cap->cap & IEEE80211_HT_CAP_TX_STBC) {
arg->peer_rate_caps |= WMI_RC_TX_STBC_FLAG;
- arg->peer_flags |= WMI_PEER_STBC;
+ arg->peer_flags |= ar->wmi.peer_flags->stbc;
}
if (ht_cap->cap & IEEE80211_HT_CAP_RX_STBC) {
@@ -1490,7 +1492,7 @@ static void ath10k_peer_assoc_h_ht(struct ath10k *ar,
stbc = stbc >> IEEE80211_HT_CAP_RX_STBC_SHIFT;
stbc = stbc << WMI_RC_RX_STBC_FLAG_S;
arg->peer_rate_caps |= stbc;
- arg->peer_flags |= WMI_PEER_STBC;
+ arg->peer_flags |= ar->wmi.peer_flags->stbc;
}
if (ht_cap->mcs.rx_mask[1] && ht_cap->mcs.rx_mask[2])
@@ -1603,10 +1605,10 @@ static void ath10k_peer_assoc_h_vht(struct ath10k *ar,
if (!vht_cap->vht_supported)
return;
- arg->peer_flags |= WMI_PEER_VHT;
+ arg->peer_flags |= ar->wmi.peer_flags->vht;
if (ar->hw->conf.chandef.chan->band == IEEE80211_BAND_2GHZ)
- arg->peer_flags |= WMI_PEER_VHT_2G;
+ arg->peer_flags |= ar->wmi.peer_flags->vht_2g;
arg->peer_vht_caps = vht_cap->cap;
@@ -1623,7 +1625,7 @@ static void ath10k_peer_assoc_h_vht(struct ath10k *ar,
ampdu_factor)) - 1);
if (sta->bandwidth == IEEE80211_STA_RX_BW_80)
- arg->peer_flags |= WMI_PEER_80MHZ;
+ arg->peer_flags |= ar->wmi.peer_flags->bw80;
arg->peer_vht_rates.rx_max_rate =
__le16_to_cpu(vht_cap->vht_mcs.rx_highest);
@@ -1648,27 +1650,32 @@ static void ath10k_peer_assoc_h_qos(struct ath10k *ar,
switch (arvif->vdev_type) {
case WMI_VDEV_TYPE_AP:
if (sta->wme)
- arg->peer_flags |= WMI_PEER_QOS;
+ arg->peer_flags |=
+ arvif->ar->wmi.peer_flags->qos;
if (sta->wme && sta->uapsd_queues) {
- arg->peer_flags |= WMI_PEER_APSD;
+ arg->peer_flags |=
+ arvif->ar->wmi.peer_flags->apsd;
arg->peer_rate_caps |= WMI_RC_UAPSD_FLAG;
}
break;
case WMI_VDEV_TYPE_STA:
if (vif->bss_conf.qos)
- arg->peer_flags |= WMI_PEER_QOS;
+ arg->peer_flags |=
+ arvif->ar->wmi.peer_flags->qos;
break;
case WMI_VDEV_TYPE_IBSS:
if (sta->wme)
- arg->peer_flags |= WMI_PEER_QOS;
+ arg->peer_flags |=
+ arvif->ar->wmi.peer_flags->qos;
break;
default:
break;
}
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac peer %pM qos %d\n",
- sta->addr, !!(arg->peer_flags & WMI_PEER_QOS));
+ sta->addr, !!(arg->peer_flags &
+ arvif->ar->wmi.peer_flags->qos));
}
static bool ath10k_mac_sta_has_11g_rates(struct ieee80211_sta *sta)
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index f34baa0..a99793e 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -2788,6 +2788,25 @@ static const struct wmi_ops wmi_tlv_ops = {
.gen_sta_keepalive = ath10k_wmi_tlv_op_gen_sta_keepalive,
};
+static struct wmi_peer_flags_map wmi_tlv_peer_flags_map = {
+ .auth = WMI_TLV_PEER_AUTH,
+ .qos = WMI_TLV_PEER_QOS,
+ .need_ptk_4_way = WMI_TLV_PEER_NEED_PTK_4_WAY,
+ .need_gtk_2_way = WMI_TLV_PEER_NEED_GTK_2_WAY,
+ .apsd = WMI_TLV_PEER_APSD,
+ .ht = WMI_TLV_PEER_HT,
+ .bw40 = WMI_TLV_PEER_40MHZ,
+ .stbc = WMI_TLV_PEER_STBC,
+ .ldbc = WMI_TLV_PEER_LDPC,
+ .dyn_mimops = WMI_TLV_PEER_DYN_MIMOPS,
+ .static_mimops = WMI_TLV_PEER_STATIC_MIMOPS,
+ .spatial_mux = WMI_TLV_PEER_SPATIAL_MUX,
+ .vht = WMI_TLV_PEER_VHT,
+ .bw80 = WMI_TLV_PEER_80MHZ,
+ .pmf = WMI_TLV_PEER_PMF,
+};
+
+
/************/
/* TLV init */
/************/
@@ -2798,4 +2817,5 @@ void ath10k_wmi_tlv_attach(struct ath10k *ar)
ar->wmi.vdev_param = &wmi_tlv_vdev_param_map;
ar->wmi.pdev_param = &wmi_tlv_pdev_param_map;
ar->wmi.ops = &wmi_tlv_ops;
+ ar->wmi.peer_flags = &wmi_tlv_peer_flags_map;
}
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
index d7a31e1..7159b69 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
@@ -527,6 +527,25 @@ enum wmi_tlv_vdev_param {
WMI_TLV_VDEV_PARAM_IBSS_PS_1RX_CHAIN_IN_ATIM_WINDOW_ENABLE,
};
+enum wmi_tlv_peer_flags {
+
+ WMI_TLV_PEER_AUTH = 0x00000001,
+ WMI_TLV_PEER_QOS = 0x00000002,
+ WMI_TLV_PEER_NEED_PTK_4_WAY = 0x00000004,
+ WMI_TLV_PEER_NEED_GTK_2_WAY = 0x00000010,
+ WMI_TLV_PEER_APSD = 0x00000800,
+ WMI_TLV_PEER_HT = 0x00001000,
+ WMI_TLV_PEER_40MHZ = 0x00002000,
+ WMI_TLV_PEER_STBC = 0x00008000,
+ WMI_TLV_PEER_LDPC = 0x00010000,
+ WMI_TLV_PEER_DYN_MIMOPS = 0x00020000,
+ WMI_TLV_PEER_STATIC_MIMOPS = 0x00040000,
+ WMI_TLV_PEER_SPATIAL_MUX = 0x00200000,
+ WMI_TLV_PEER_VHT = 0x02000000,
+ WMI_TLV_PEER_80MHZ = 0x04000000,
+ WMI_TLV_PEER_PMF = 0x08000000,
+};
+
enum wmi_tlv_tag {
WMI_TLV_TAG_LAST_RESERVED = 15,
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index c7ea77e..6be3726 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -849,6 +849,62 @@ static struct wmi_cmd_map wmi_10_2_cmd_map = {
.pdev_get_temperature_cmdid = WMI_CMD_UNSUPPORTED,
};
+static struct wmi_peer_flags_map wmi_peer_flags_map = {
+ .auth = WMI_PEER_AUTH,
+ .qos = WMI_PEER_QOS,
+ .need_ptk_4_way = WMI_PEER_NEED_PTK_4_WAY,
+ .need_gtk_2_way = WMI_PEER_NEED_GTK_2_WAY,
+ .apsd = WMI_PEER_APSD,
+ .ht = WMI_PEER_HT,
+ .bw40 = WMI_PEER_40MHZ,
+ .stbc = WMI_PEER_STBC,
+ .ldbc = WMI_PEER_LDPC,
+ .dyn_mimops = WMI_PEER_DYN_MIMOPS,
+ .static_mimops = WMI_PEER_STATIC_MIMOPS,
+ .spatial_mux = WMI_PEER_SPATIAL_MUX,
+ .vht = WMI_PEER_VHT,
+ .bw80 = WMI_PEER_80MHZ,
+ .vht_2g = WMI_PEER_VHT_2G,
+ .pmf = WMI_PEER_PMF,
+};
+
+static struct wmi_peer_flags_map wmi_10x_peer_flags_map = {
+ .auth = WMI_10X_PEER_AUTH,
+ .qos = WMI_10X_PEER_QOS,
+ .need_ptk_4_way = WMI_10X_PEER_NEED_PTK_4_WAY,
+ .need_gtk_2_way = WMI_10X_PEER_NEED_GTK_2_WAY,
+ .apsd = WMI_10X_PEER_APSD,
+ .ht = WMI_10X_PEER_HT,
+ .bw40 = WMI_10X_PEER_40MHZ,
+ .stbc = WMI_10X_PEER_STBC,
+ .ldbc = WMI_10X_PEER_LDPC,
+ .dyn_mimops = WMI_10X_PEER_DYN_MIMOPS,
+ .static_mimops = WMI_10X_PEER_STATIC_MIMOPS,
+ .spatial_mux = WMI_10X_PEER_SPATIAL_MUX,
+ .vht = WMI_10X_PEER_VHT,
+ .bw80 = WMI_10X_PEER_80MHZ,
+};
+
+static struct wmi_peer_flags_map wmi_10_2_peer_flags_map = {
+ .auth = WMI_10_2_PEER_AUTH,
+ .qos = WMI_10_2_PEER_QOS,
+ .need_ptk_4_way = WMI_10_2_PEER_NEED_PTK_4_WAY,
+ .need_gtk_2_way = WMI_10_2_PEER_NEED_GTK_2_WAY,
+ .apsd = WMI_10_2_PEER_APSD,
+ .ht = WMI_10_2_PEER_HT,
+ .bw40 = WMI_10_2_PEER_40MHZ,
+ .stbc = WMI_10_2_PEER_STBC,
+ .ldbc = WMI_10_2_PEER_LDPC,
+ .dyn_mimops = WMI_10_2_PEER_DYN_MIMOPS,
+ .static_mimops = WMI_10_2_PEER_STATIC_MIMOPS,
+ .spatial_mux = WMI_10_2_PEER_SPATIAL_MUX,
+ .vht = WMI_10_2_PEER_VHT,
+ .bw80 = WMI_10_2_PEER_80MHZ,
+ .vht_2g = WMI_10_2_PEER_VHT_2G,
+ .pmf = WMI_10_2_PEER_PMF,
+};
+
+
void ath10k_wmi_put_wmi_channel(struct wmi_channel *ch,
const struct wmi_channel_arg *arg)
{
@@ -5462,24 +5518,28 @@ int ath10k_wmi_attach(struct ath10k *ar)
ar->wmi.ops = &wmi_10_2_4_ops;
ar->wmi.vdev_param = &wmi_10_2_4_vdev_param_map;
ar->wmi.pdev_param = &wmi_10_2_4_pdev_param_map;
+ ar->wmi.peer_flags = &wmi_10_2_peer_flags_map;
break;
case ATH10K_FW_WMI_OP_VERSION_10_2:
ar->wmi.cmd = &wmi_10_2_cmd_map;
ar->wmi.ops = &wmi_10_2_ops;
ar->wmi.vdev_param = &wmi_10x_vdev_param_map;
ar->wmi.pdev_param = &wmi_10x_pdev_param_map;
+ ar->wmi.peer_flags = &wmi_10_2_peer_flags_map;
break;
case ATH10K_FW_WMI_OP_VERSION_10_1:
ar->wmi.cmd = &wmi_10x_cmd_map;
ar->wmi.ops = &wmi_10_1_ops;
ar->wmi.vdev_param = &wmi_10x_vdev_param_map;
ar->wmi.pdev_param = &wmi_10x_pdev_param_map;
+ ar->wmi.peer_flags = &wmi_10x_peer_flags_map;
break;
case ATH10K_FW_WMI_OP_VERSION_MAIN:
ar->wmi.cmd = &wmi_cmd_map;
ar->wmi.ops = &wmi_ops;
ar->wmi.vdev_param = &wmi_vdev_param_map;
ar->wmi.pdev_param = &wmi_pdev_param_map;
+ ar->wmi.peer_flags = &wmi_peer_flags_map;
break;
case ATH10K_FW_WMI_OP_VERSION_TLV:
ath10k_wmi_tlv_attach(ar);
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 28c1822..40d5244 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -4509,21 +4509,82 @@ struct wmi_peer_set_q_empty_callback_cmd {
__le32 callback_enable;
} __packed;
-#define WMI_PEER_AUTH 0x00000001
-#define WMI_PEER_QOS 0x00000002
-#define WMI_PEER_NEED_PTK_4_WAY 0x00000004
-#define WMI_PEER_NEED_GTK_2_WAY 0x00000010
-#define WMI_PEER_APSD 0x00000800
-#define WMI_PEER_HT 0x00001000
-#define WMI_PEER_40MHZ 0x00002000
-#define WMI_PEER_STBC 0x00008000
-#define WMI_PEER_LDPC 0x00010000
-#define WMI_PEER_DYN_MIMOPS 0x00020000
-#define WMI_PEER_STATIC_MIMOPS 0x00040000
-#define WMI_PEER_SPATIAL_MUX 0x00200000
-#define WMI_PEER_VHT 0x02000000
-#define WMI_PEER_80MHZ 0x04000000
-#define WMI_PEER_VHT_2G 0x08000000
+struct wmi_peer_flags_map {
+ u32 auth;
+ u32 qos;
+ u32 need_ptk_4_way;
+ u32 need_gtk_2_way;
+ u32 apsd;
+ u32 ht;
+ u32 bw40;
+ u32 stbc;
+ u32 ldbc;
+ u32 dyn_mimops;
+ u32 static_mimops;
+ u32 spatial_mux;
+ u32 vht;
+ u32 bw80;
+ u32 vht_2g;
+ u32 pmf;
+};
+
+enum wmi_peer_flags {
+
+ WMI_PEER_AUTH = 0x00000001,
+ WMI_PEER_QOS = 0x00000002,
+ WMI_PEER_NEED_PTK_4_WAY = 0x00000004,
+ WMI_PEER_NEED_GTK_2_WAY = 0x00000010,
+ WMI_PEER_APSD = 0x00000800,
+ WMI_PEER_HT = 0x00001000,
+ WMI_PEER_40MHZ = 0x00002000,
+ WMI_PEER_STBC = 0x00008000,
+ WMI_PEER_LDPC = 0x00010000,
+ WMI_PEER_DYN_MIMOPS = 0x00020000,
+ WMI_PEER_STATIC_MIMOPS = 0x00040000,
+ WMI_PEER_SPATIAL_MUX = 0x00200000,
+ WMI_PEER_VHT = 0x02000000,
+ WMI_PEER_80MHZ = 0x04000000,
+ WMI_PEER_VHT_2G = 0x08000000,
+ WMI_PEER_PMF = 0x10000000,
+};
+
+enum wmi_10x_peer_flags {
+
+ WMI_10X_PEER_AUTH = 0x00000001,
+ WMI_10X_PEER_QOS = 0x00000002,
+ WMI_10X_PEER_NEED_PTK_4_WAY = 0x00000004,
+ WMI_10X_PEER_NEED_GTK_2_WAY = 0x00000010,
+ WMI_10X_PEER_APSD = 0x00000800,
+ WMI_10X_PEER_HT = 0x00001000,
+ WMI_10X_PEER_40MHZ = 0x00002000,
+ WMI_10X_PEER_STBC = 0x00008000,
+ WMI_10X_PEER_LDPC = 0x00010000,
+ WMI_10X_PEER_DYN_MIMOPS = 0x00020000,
+ WMI_10X_PEER_STATIC_MIMOPS = 0x00040000,
+ WMI_10X_PEER_SPATIAL_MUX = 0x00200000,
+ WMI_10X_PEER_VHT = 0x02000000,
+ WMI_10X_PEER_80MHZ = 0x04000000,
+};
+
+enum wmi_10_2_peer_flags {
+
+ WMI_10_2_PEER_AUTH = 0x00000001,
+ WMI_10_2_PEER_QOS = 0x00000002,
+ WMI_10_2_PEER_NEED_PTK_4_WAY = 0x00000004,
+ WMI_10_2_PEER_NEED_GTK_2_WAY = 0x00000010,
+ WMI_10_2_PEER_APSD = 0x00000800,
+ WMI_10_2_PEER_HT = 0x00001000,
+ WMI_10_2_PEER_40MHZ = 0x00002000,
+ WMI_10_2_PEER_STBC = 0x00008000,
+ WMI_10_2_PEER_LDPC = 0x00010000,
+ WMI_10_2_PEER_DYN_MIMOPS = 0x00020000,
+ WMI_10_2_PEER_STATIC_MIMOPS = 0x00040000,
+ WMI_10_2_PEER_SPATIAL_MUX = 0x00200000,
+ WMI_10_2_PEER_VHT = 0x02000000,
+ WMI_10_2_PEER_80MHZ = 0x04000000,
+ WMI_10_2_PEER_VHT_2G = 0x08000000,
+ WMI_10_2_PEER_PMF = 0x10000000,
+};
/*
* Peer rate capabilities.
--
1.9.1
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
next reply other threads:[~2015-03-06 11:28 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-06 11:27 SenthilKumar Jegadeesan [this message]
2015-03-06 11:27 ` [PATCH V3 1/2] ath10k: Add abstraction layer for peer flags SenthilKumar Jegadeesan
2015-03-06 11:27 ` [PATCH V3 2/2] ath10k: Enable encryption of ADDBA request in PMF configuration SenthilKumar Jegadeesan
2015-03-06 11:27 ` SenthilKumar Jegadeesan
2015-04-10 12:26 ` [PATCH V3 1/2] ath10k: Add abstraction layer for peer flags Michal Kazior
2015-04-10 12:26 ` Michal Kazior
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1425641270-4059-1-git-send-email-sjegadee@qti.qualcomm.com \
--to=sjegadee@qti.qualcomm.com \
--cc=ath10k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.