From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> To: <ath10k@lists.infradead.org> Cc: <linux-wireless@vger.kernel.org>, Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Subject: [PATCH 3/6] ath10k: configure thermal throttle while powering up Date: Sun, 15 Mar 2015 20:36:22 +0530 [thread overview] Message-ID: <1426431985-16332-4-git-send-email-rmanohar@qti.qualcomm.com> (raw) In-Reply-To: <1426431985-16332-1-git-send-email-rmanohar@qti.qualcomm.com> Thermal throttling is not handled in software restart and device bootup. Also it needs to be configured whenever quiet period got updated. Fix that. Reported-by: Matthias Kaehlcke <mka@google.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> --- drivers/net/wireless/ath/ath10k/debug.c | 1 + drivers/net/wireless/ath/ath10k/mac.c | 1 + drivers/net/wireless/ath/ath10k/thermal.c | 34 +++++++++++++++++++------------ drivers/net/wireless/ath/ath10k/thermal.h | 5 +++++ 4 files changed, 28 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c index 812365c..d684edf 100644 --- a/drivers/net/wireless/ath/ath10k/debug.c +++ b/drivers/net/wireless/ath/ath10k/debug.c @@ -2008,6 +2008,7 @@ static ssize_t ath10k_write_quiet_period(struct file *file, } mutex_lock(&ar->conf_mutex); ar->thermal.quiet_period = period; + ath10k_thermal_set_throttling(ar); mutex_unlock(&ar->conf_mutex); return count; diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index a2302bf..5cb0cb6 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -3159,6 +3159,7 @@ static int ath10k_start(struct ieee80211_hw *hw) ath10k_regd_update(ar); ath10k_spectral_start(ar); + ath10k_thermal_set_throttling(ar); mutex_unlock(&ar->conf_mutex); return 0; diff --git a/drivers/net/wireless/ath/ath10k/thermal.c b/drivers/net/wireless/ath/ath10k/thermal.c index dc0ebf3..8640f41 100644 --- a/drivers/net/wireless/ath/ath10k/thermal.c +++ b/drivers/net/wireless/ath/ath10k/thermal.c @@ -73,7 +73,6 @@ ath10k_thermal_set_cur_throttle_state(struct thermal_cooling_device *cdev, unsigned long throttle_state) { struct ath10k *ar = cdev->devdata; - u32 period, duration, enabled; int num_bss, ret = 0; mutex_lock(&ar->conf_mutex); @@ -99,19 +98,8 @@ ath10k_thermal_set_cur_throttle_state(struct thermal_cooling_device *cdev, ret = -ENETDOWN; goto out; } - period = ar->thermal.quiet_period; - duration = (period * throttle_state) / 100; - enabled = duration ? 1 : 0; - - ret = ath10k_wmi_pdev_set_quiet_mode(ar, period, duration, - ATH10K_QUIET_START_OFFSET, - enabled); - if (ret) { - ath10k_warn(ar, "failed to set quiet mode period %u duarion %u enabled %u ret %d\n", - period, duration, enabled, ret); - goto out; - } ar->thermal.throttle_state = throttle_state; + ath10k_thermal_set_throttling(ar); out: mutex_unlock(&ar->conf_mutex); return ret; @@ -186,6 +174,26 @@ static struct attribute *ath10k_hwmon_attrs[] = { }; ATTRIBUTE_GROUPS(ath10k_hwmon); +void ath10k_thermal_set_throttling(struct ath10k *ar) +{ + u32 period, duration, enabled; + int ret; + + lockdep_assert_held(&ar->conf_mutex); + + period = ar->thermal.quiet_period; + duration = (period * ar->thermal.throttle_state) / 100; + enabled = duration ? 1 : 0; + + ret = ath10k_wmi_pdev_set_quiet_mode(ar, period, duration, + ATH10K_QUIET_START_OFFSET, + enabled); + if (ret) { + ath10k_warn(ar, "failed to set quiet mode period %u duarion %u enabled %u ret %d\n", + period, duration, enabled, ret); + } +} + int ath10k_thermal_register(struct ath10k *ar) { struct thermal_cooling_device *cdev; diff --git a/drivers/net/wireless/ath/ath10k/thermal.h b/drivers/net/wireless/ath/ath10k/thermal.h index 5728010..b610ea5 100644 --- a/drivers/net/wireless/ath/ath10k/thermal.h +++ b/drivers/net/wireless/ath/ath10k/thermal.h @@ -40,6 +40,7 @@ struct ath10k_thermal { int ath10k_thermal_register(struct ath10k *ar); void ath10k_thermal_unregister(struct ath10k *ar); void ath10k_thermal_event_temperature(struct ath10k *ar, int temperature); +void ath10k_thermal_set_throttling(struct ath10k *ar); #else static inline int ath10k_thermal_register(struct ath10k *ar) { @@ -55,5 +56,9 @@ static inline void ath10k_thermal_event_temperature(struct ath10k *ar, { } +static inline void ath10k_thermal_set_throttling(struct ath10k *ar) +{ +} + #endif #endif /* _THERMAL_ */ -- 2.3.2
WARNING: multiple messages have this Message-ID (diff)
From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> To: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org, Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Subject: [PATCH 3/6] ath10k: configure thermal throttle while powering up Date: Sun, 15 Mar 2015 20:36:22 +0530 [thread overview] Message-ID: <1426431985-16332-4-git-send-email-rmanohar@qti.qualcomm.com> (raw) In-Reply-To: <1426431985-16332-1-git-send-email-rmanohar@qti.qualcomm.com> Thermal throttling is not handled in software restart and device bootup. Also it needs to be configured whenever quiet period got updated. Fix that. Reported-by: Matthias Kaehlcke <mka@google.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> --- drivers/net/wireless/ath/ath10k/debug.c | 1 + drivers/net/wireless/ath/ath10k/mac.c | 1 + drivers/net/wireless/ath/ath10k/thermal.c | 34 +++++++++++++++++++------------ drivers/net/wireless/ath/ath10k/thermal.h | 5 +++++ 4 files changed, 28 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c index 812365c..d684edf 100644 --- a/drivers/net/wireless/ath/ath10k/debug.c +++ b/drivers/net/wireless/ath/ath10k/debug.c @@ -2008,6 +2008,7 @@ static ssize_t ath10k_write_quiet_period(struct file *file, } mutex_lock(&ar->conf_mutex); ar->thermal.quiet_period = period; + ath10k_thermal_set_throttling(ar); mutex_unlock(&ar->conf_mutex); return count; diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index a2302bf..5cb0cb6 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -3159,6 +3159,7 @@ static int ath10k_start(struct ieee80211_hw *hw) ath10k_regd_update(ar); ath10k_spectral_start(ar); + ath10k_thermal_set_throttling(ar); mutex_unlock(&ar->conf_mutex); return 0; diff --git a/drivers/net/wireless/ath/ath10k/thermal.c b/drivers/net/wireless/ath/ath10k/thermal.c index dc0ebf3..8640f41 100644 --- a/drivers/net/wireless/ath/ath10k/thermal.c +++ b/drivers/net/wireless/ath/ath10k/thermal.c @@ -73,7 +73,6 @@ ath10k_thermal_set_cur_throttle_state(struct thermal_cooling_device *cdev, unsigned long throttle_state) { struct ath10k *ar = cdev->devdata; - u32 period, duration, enabled; int num_bss, ret = 0; mutex_lock(&ar->conf_mutex); @@ -99,19 +98,8 @@ ath10k_thermal_set_cur_throttle_state(struct thermal_cooling_device *cdev, ret = -ENETDOWN; goto out; } - period = ar->thermal.quiet_period; - duration = (period * throttle_state) / 100; - enabled = duration ? 1 : 0; - - ret = ath10k_wmi_pdev_set_quiet_mode(ar, period, duration, - ATH10K_QUIET_START_OFFSET, - enabled); - if (ret) { - ath10k_warn(ar, "failed to set quiet mode period %u duarion %u enabled %u ret %d\n", - period, duration, enabled, ret); - goto out; - } ar->thermal.throttle_state = throttle_state; + ath10k_thermal_set_throttling(ar); out: mutex_unlock(&ar->conf_mutex); return ret; @@ -186,6 +174,26 @@ static struct attribute *ath10k_hwmon_attrs[] = { }; ATTRIBUTE_GROUPS(ath10k_hwmon); +void ath10k_thermal_set_throttling(struct ath10k *ar) +{ + u32 period, duration, enabled; + int ret; + + lockdep_assert_held(&ar->conf_mutex); + + period = ar->thermal.quiet_period; + duration = (period * ar->thermal.throttle_state) / 100; + enabled = duration ? 1 : 0; + + ret = ath10k_wmi_pdev_set_quiet_mode(ar, period, duration, + ATH10K_QUIET_START_OFFSET, + enabled); + if (ret) { + ath10k_warn(ar, "failed to set quiet mode period %u duarion %u enabled %u ret %d\n", + period, duration, enabled, ret); + } +} + int ath10k_thermal_register(struct ath10k *ar) { struct thermal_cooling_device *cdev; diff --git a/drivers/net/wireless/ath/ath10k/thermal.h b/drivers/net/wireless/ath/ath10k/thermal.h index 5728010..b610ea5 100644 --- a/drivers/net/wireless/ath/ath10k/thermal.h +++ b/drivers/net/wireless/ath/ath10k/thermal.h @@ -40,6 +40,7 @@ struct ath10k_thermal { int ath10k_thermal_register(struct ath10k *ar); void ath10k_thermal_unregister(struct ath10k *ar); void ath10k_thermal_event_temperature(struct ath10k *ar, int temperature); +void ath10k_thermal_set_throttling(struct ath10k *ar); #else static inline int ath10k_thermal_register(struct ath10k *ar) { @@ -55,5 +56,9 @@ static inline void ath10k_thermal_event_temperature(struct ath10k *ar, { } +static inline void ath10k_thermal_set_throttling(struct ath10k *ar) +{ +} + #endif #endif /* _THERMAL_ */ -- 2.3.2 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2015-03-15 15:07 UTC|newest] Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-03-15 15:06 [PATCH 0/6] ath10k: thermal mitigation fixes Rajkumar Manoharan 2015-03-15 15:06 ` Rajkumar Manoharan 2015-03-15 15:06 ` [PATCH 1/6] ath10k: add debugfs entry to configure quiet period Rajkumar Manoharan 2015-03-15 15:06 ` Rajkumar Manoharan 2015-03-15 15:06 ` [PATCH 2/6] ath10k: Fix interpretation of cooling device state Rajkumar Manoharan 2015-03-15 15:06 ` Rajkumar Manoharan 2015-03-15 15:06 ` Rajkumar Manoharan [this message] 2015-03-15 15:06 ` [PATCH 3/6] ath10k: configure thermal throttle while powering up Rajkumar Manoharan 2015-03-15 15:06 ` [PATCH 4/6] ath10k: do not restrict thermal throttling to ap mode Rajkumar Manoharan 2015-03-15 15:06 ` Rajkumar Manoharan 2015-03-15 15:06 ` [PATCH 5/6] ath10k: cache throttle state when device is down Rajkumar Manoharan 2015-03-15 15:06 ` Rajkumar Manoharan 2015-03-15 15:06 ` [PATCH 6/6] ath10k: move driver state check before setting throttle Rajkumar Manoharan 2015-03-15 15:06 ` Rajkumar Manoharan 2015-03-23 15:17 ` [PATCH 0/6] ath10k: thermal mitigation fixes Kalle Valo 2015-03-23 15:17 ` Kalle Valo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1426431985-16332-4-git-send-email-rmanohar@qti.qualcomm.com \ --to=rmanohar@qti.qualcomm.com \ --cc=ath10k@lists.infradead.org \ --cc=linux-wireless@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.