From: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> To: Kukjin Kim <kgene@kernel.org>, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>, Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Subject: [PATCH 1/2] ARM: dts: s3c2416: Add labels to S3C2416 nodes Date: Fri, 17 Apr 2015 22:00:10 +0900 [thread overview] Message-ID: <1429275611-2542-1-git-send-email-k.kozlowski.k@gmail.com> (raw) Add new labels to certain nodes on S3C2416 so they could be easily referenced by board DTS files. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> --- arch/arm/boot/dts/s3c2416.dtsi | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi index 30b8f7e47454..a5184ff56933 100644 --- a/arch/arm/boot/dts/s3c2416.dtsi +++ b/arch/arm/boot/dts/s3c2416.dtsi @@ -17,7 +17,7 @@ compatible = "samsung,s3c2416"; aliases { - serial3 = &uart3; + serial3 = &uart_3; }; cpus { @@ -48,7 +48,7 @@ clock-names = "timers"; }; - serial@50000000 { + uart_0: serial@50000000 { compatible = "samsung,s3c2440-uart"; clock-names = "uart", "clk_uart_baud2", "clk_uart_baud3"; @@ -56,7 +56,7 @@ <&clocks SCLK_UART>; }; - serial@50004000 { + uart_1: serial@50004000 { compatible = "samsung,s3c2440-uart"; clock-names = "uart", "clk_uart_baud2", "clk_uart_baud3"; @@ -64,7 +64,7 @@ <&clocks SCLK_UART>; }; - serial@50008000 { + uart_2: serial@50008000 { compatible = "samsung,s3c2440-uart"; clock-names = "uart", "clk_uart_baud2", "clk_uart_baud3"; @@ -72,7 +72,7 @@ <&clocks SCLK_UART>; }; - uart3: serial@5000C000 { + uart_3: serial@5000C000 { compatible = "samsung,s3c2440-uart"; reg = <0x5000C000 0x4000>; interrupts = <1 18 24 4>, <1 18 25 4>; @@ -83,7 +83,7 @@ status = "disabled"; }; - sdhci@4AC00000 { + sdhci_1: sdhci@4AC00000 { compatible = "samsung,s3c6410-sdhci"; reg = <0x4AC00000 0x100>; interrupts = <0 0 21 3>; @@ -94,7 +94,7 @@ status = "disabled"; }; - sdhci@4A800000 { + sdhci_0: sdhci@4A800000 { compatible = "samsung,s3c6410-sdhci"; reg = <0x4A800000 0x100>; interrupts = <0 0 20 3>; @@ -105,13 +105,13 @@ status = "disabled"; }; - watchdog@53000000 { + watchdog: watchdog@53000000 { interrupts = <1 9 27 3>; clocks = <&clocks PCLK_WDT>; clock-names = "watchdog"; }; - rtc@57000000 { + rtc: rtc@57000000 { compatible = "samsung,s3c2416-rtc"; clocks = <&clocks PCLK_RTC>; clock-names = "rtc"; -- 2.1.0
WARNING: multiple messages have this Message-ID (diff)
From: k.kozlowski.k@gmail.com (Krzysztof Kozlowski) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 1/2] ARM: dts: s3c2416: Add labels to S3C2416 nodes Date: Fri, 17 Apr 2015 22:00:10 +0900 [thread overview] Message-ID: <1429275611-2542-1-git-send-email-k.kozlowski.k@gmail.com> (raw) Add new labels to certain nodes on S3C2416 so they could be easily referenced by board DTS files. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> --- arch/arm/boot/dts/s3c2416.dtsi | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi index 30b8f7e47454..a5184ff56933 100644 --- a/arch/arm/boot/dts/s3c2416.dtsi +++ b/arch/arm/boot/dts/s3c2416.dtsi @@ -17,7 +17,7 @@ compatible = "samsung,s3c2416"; aliases { - serial3 = &uart3; + serial3 = &uart_3; }; cpus { @@ -48,7 +48,7 @@ clock-names = "timers"; }; - serial at 50000000 { + uart_0: serial at 50000000 { compatible = "samsung,s3c2440-uart"; clock-names = "uart", "clk_uart_baud2", "clk_uart_baud3"; @@ -56,7 +56,7 @@ <&clocks SCLK_UART>; }; - serial at 50004000 { + uart_1: serial at 50004000 { compatible = "samsung,s3c2440-uart"; clock-names = "uart", "clk_uart_baud2", "clk_uart_baud3"; @@ -64,7 +64,7 @@ <&clocks SCLK_UART>; }; - serial at 50008000 { + uart_2: serial at 50008000 { compatible = "samsung,s3c2440-uart"; clock-names = "uart", "clk_uart_baud2", "clk_uart_baud3"; @@ -72,7 +72,7 @@ <&clocks SCLK_UART>; }; - uart3: serial at 5000C000 { + uart_3: serial at 5000C000 { compatible = "samsung,s3c2440-uart"; reg = <0x5000C000 0x4000>; interrupts = <1 18 24 4>, <1 18 25 4>; @@ -83,7 +83,7 @@ status = "disabled"; }; - sdhci at 4AC00000 { + sdhci_1: sdhci at 4AC00000 { compatible = "samsung,s3c6410-sdhci"; reg = <0x4AC00000 0x100>; interrupts = <0 0 21 3>; @@ -94,7 +94,7 @@ status = "disabled"; }; - sdhci at 4A800000 { + sdhci_0: sdhci at 4A800000 { compatible = "samsung,s3c6410-sdhci"; reg = <0x4A800000 0x100>; interrupts = <0 0 20 3>; @@ -105,13 +105,13 @@ status = "disabled"; }; - watchdog at 53000000 { + watchdog: watchdog at 53000000 { interrupts = <1 9 27 3>; clocks = <&clocks PCLK_WDT>; clock-names = "watchdog"; }; - rtc at 57000000 { + rtc: rtc at 57000000 { compatible = "samsung,s3c2416-rtc"; clocks = <&clocks PCLK_RTC>; clock-names = "rtc"; -- 2.1.0
next reply other threads:[~2015-04-17 13:01 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-04-17 13:00 Krzysztof Kozlowski [this message] 2015-04-17 13:00 ` [PATCH 1/2] ARM: dts: s3c2416: Add labels to S3C2416 nodes Krzysztof Kozlowski 2015-04-17 13:00 ` [PATCH 2/2] ARM: dts: s3c2416: Use labels for overriding nodes in SMDK2416 Krzysztof Kozlowski 2015-04-17 13:00 ` Krzysztof Kozlowski
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1429275611-2542-1-git-send-email-k.kozlowski.k@gmail.com \ --to=k.kozlowski.k@gmail.com \ --cc=arnd@arndb.de \ --cc=devicetree@vger.kernel.org \ --cc=kgene@kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-samsung-soc@vger.kernel.org \ --cc=olof@lixom.net \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.