From: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> To: Kukjin Kim <kgene@kernel.org>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>, Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Subject: [PATCH v3 10/11] ARM: dts: exynos4: Use labels for overriding nodes in SMDK4412 Date: Fri, 17 Apr 2015 22:47:18 +0900 [thread overview] Message-ID: <1429278439-3919-11-git-send-email-k.kozlowski.k@gmail.com> (raw) In-Reply-To: <1429278439-3919-1-git-send-email-k.kozlowski.k@gmail.com> Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> --- arch/arm/boot/dts/exynos4412-smdk4412.dts | 210 +++++++++++++++--------------- 1 file changed, 105 insertions(+), 105 deletions(-) diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts index b9256afbcc68..c2421df1fa43 100644 --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -28,135 +28,135 @@ stdout-path = &serial_1; }; - g2d@10800000 { - status = "okay"; - }; - - pinctrl@11000000 { - keypad_rows: keypad-rows { - samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2"; - samsung,pin-function = <3>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <0>; }; - keypad_cols: keypad-cols { - samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3", - "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + xusbxti { + compatible = "samsung,clock-xusbxti"; + clock-frequency = <24000000>; }; }; +}; - keypad@100A0000 { - samsung,keypad-num-rows = <3>; - samsung,keypad-num-columns = <8>; - linux,keypad-no-autorepeat; - linux,keypad-wakeup; - pinctrl-0 = <&keypad_rows &keypad_cols>; - pinctrl-names = "default"; - status = "okay"; - - key_1 { - keypad,row = <1>; - keypad,column = <3>; - linux,code = <2>; - }; - - key_2 { - keypad,row = <1>; - keypad,column = <4>; - linux,code = <3>; - }; - - key_3 { - keypad,row = <1>; - keypad,column = <5>; - linux,code = <4>; - }; - - key_4 { - keypad,row = <1>; - keypad,column = <6>; - linux,code = <5>; - }; +&g2d { + status = "okay"; +}; - key_5 { - keypad,row = <1>; - keypad,column = <7>; - linux,code = <6>; - }; +&keypad { + samsung,keypad-num-rows = <3>; + samsung,keypad-num-columns = <8>; + linux,keypad-no-autorepeat; + linux,keypad-wakeup; + pinctrl-0 = <&keypad_rows &keypad_cols>; + pinctrl-names = "default"; + status = "okay"; + + key_1 { + keypad,row = <1>; + keypad,column = <3>; + linux,code = <2>; + }; - key_A { - keypad,row = <2>; - keypad,column = <6>; - linux,code = <30>; - }; + key_2 { + keypad,row = <1>; + keypad,column = <4>; + linux,code = <3>; + }; - key_B { - keypad,row = <2>; - keypad,column = <7>; - linux,code = <48>; - }; + key_3 { + keypad,row = <1>; + keypad,column = <5>; + linux,code = <4>; + }; - key_C { - keypad,row = <0>; - keypad,column = <5>; - linux,code = <46>; - }; + key_4 { + keypad,row = <1>; + keypad,column = <6>; + linux,code = <5>; + }; - key_D { - keypad,row = <2>; - keypad,column = <5>; - linux,code = <32>; - }; + key_5 { + keypad,row = <1>; + keypad,column = <7>; + linux,code = <6>; + }; - key_E { - keypad,row = <0>; - keypad,column = <7>; - linux,code = <18>; - }; + key_A { + keypad,row = <2>; + keypad,column = <6>; + linux,code = <30>; }; - sdhci@12530000 { - bus-width = <4>; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; - pinctrl-names = "default"; - status = "okay"; + key_B { + keypad,row = <2>; + keypad,column = <7>; + linux,code = <48>; }; - codec@13400000 { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; - status = "okay"; + key_C { + keypad,row = <0>; + keypad,column = <5>; + linux,code = <46>; }; - serial@13800000 { - status = "okay"; + key_D { + keypad,row = <2>; + keypad,column = <5>; + linux,code = <32>; }; - serial@13810000 { - status = "okay"; + key_E { + keypad,row = <0>; + keypad,column = <7>; + linux,code = <18>; }; +}; + +&mfc { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; + status = "okay"; +}; - serial@13820000 { - status = "okay"; +&pinctrl_1 { + keypad_rows: keypad-rows { + samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; }; - serial@13830000 { - status = "okay"; + keypad_cols: keypad-cols { + samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3", + "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; }; +}; - fixed-rate-clocks { - xxti { - compatible = "samsung,clock-xxti"; - clock-frequency = <0>; - }; +&sdhci_2 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; + pinctrl-names = "default"; + status = "okay"; +}; - xusbxti { - compatible = "samsung,clock-xusbxti"; - clock-frequency = <24000000>; - }; - }; +&serial_0 { + status = "okay"; +}; + +&serial_1 { + status = "okay"; +}; + +&serial_2 { + status = "okay"; +}; + +&serial_3 { + status = "okay"; }; -- 2.1.0
WARNING: multiple messages have this Message-ID (diff)
From: k.kozlowski.k@gmail.com (Krzysztof Kozlowski) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 10/11] ARM: dts: exynos4: Use labels for overriding nodes in SMDK4412 Date: Fri, 17 Apr 2015 22:47:18 +0900 [thread overview] Message-ID: <1429278439-3919-11-git-send-email-k.kozlowski.k@gmail.com> (raw) In-Reply-To: <1429278439-3919-1-git-send-email-k.kozlowski.k@gmail.com> Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> --- arch/arm/boot/dts/exynos4412-smdk4412.dts | 210 +++++++++++++++--------------- 1 file changed, 105 insertions(+), 105 deletions(-) diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts index b9256afbcc68..c2421df1fa43 100644 --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -28,135 +28,135 @@ stdout-path = &serial_1; }; - g2d at 10800000 { - status = "okay"; - }; - - pinctrl at 11000000 { - keypad_rows: keypad-rows { - samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2"; - samsung,pin-function = <3>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <0>; }; - keypad_cols: keypad-cols { - samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3", - "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + xusbxti { + compatible = "samsung,clock-xusbxti"; + clock-frequency = <24000000>; }; }; +}; - keypad at 100A0000 { - samsung,keypad-num-rows = <3>; - samsung,keypad-num-columns = <8>; - linux,keypad-no-autorepeat; - linux,keypad-wakeup; - pinctrl-0 = <&keypad_rows &keypad_cols>; - pinctrl-names = "default"; - status = "okay"; - - key_1 { - keypad,row = <1>; - keypad,column = <3>; - linux,code = <2>; - }; - - key_2 { - keypad,row = <1>; - keypad,column = <4>; - linux,code = <3>; - }; - - key_3 { - keypad,row = <1>; - keypad,column = <5>; - linux,code = <4>; - }; - - key_4 { - keypad,row = <1>; - keypad,column = <6>; - linux,code = <5>; - }; +&g2d { + status = "okay"; +}; - key_5 { - keypad,row = <1>; - keypad,column = <7>; - linux,code = <6>; - }; +&keypad { + samsung,keypad-num-rows = <3>; + samsung,keypad-num-columns = <8>; + linux,keypad-no-autorepeat; + linux,keypad-wakeup; + pinctrl-0 = <&keypad_rows &keypad_cols>; + pinctrl-names = "default"; + status = "okay"; + + key_1 { + keypad,row = <1>; + keypad,column = <3>; + linux,code = <2>; + }; - key_A { - keypad,row = <2>; - keypad,column = <6>; - linux,code = <30>; - }; + key_2 { + keypad,row = <1>; + keypad,column = <4>; + linux,code = <3>; + }; - key_B { - keypad,row = <2>; - keypad,column = <7>; - linux,code = <48>; - }; + key_3 { + keypad,row = <1>; + keypad,column = <5>; + linux,code = <4>; + }; - key_C { - keypad,row = <0>; - keypad,column = <5>; - linux,code = <46>; - }; + key_4 { + keypad,row = <1>; + keypad,column = <6>; + linux,code = <5>; + }; - key_D { - keypad,row = <2>; - keypad,column = <5>; - linux,code = <32>; - }; + key_5 { + keypad,row = <1>; + keypad,column = <7>; + linux,code = <6>; + }; - key_E { - keypad,row = <0>; - keypad,column = <7>; - linux,code = <18>; - }; + key_A { + keypad,row = <2>; + keypad,column = <6>; + linux,code = <30>; }; - sdhci at 12530000 { - bus-width = <4>; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; - pinctrl-names = "default"; - status = "okay"; + key_B { + keypad,row = <2>; + keypad,column = <7>; + linux,code = <48>; }; - codec at 13400000 { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; - status = "okay"; + key_C { + keypad,row = <0>; + keypad,column = <5>; + linux,code = <46>; }; - serial at 13800000 { - status = "okay"; + key_D { + keypad,row = <2>; + keypad,column = <5>; + linux,code = <32>; }; - serial at 13810000 { - status = "okay"; + key_E { + keypad,row = <0>; + keypad,column = <7>; + linux,code = <18>; }; +}; + +&mfc { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; + status = "okay"; +}; - serial at 13820000 { - status = "okay"; +&pinctrl_1 { + keypad_rows: keypad-rows { + samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; }; - serial at 13830000 { - status = "okay"; + keypad_cols: keypad-cols { + samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3", + "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; }; +}; - fixed-rate-clocks { - xxti { - compatible = "samsung,clock-xxti"; - clock-frequency = <0>; - }; +&sdhci_2 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; + pinctrl-names = "default"; + status = "okay"; +}; - xusbxti { - compatible = "samsung,clock-xusbxti"; - clock-frequency = <24000000>; - }; - }; +&serial_0 { + status = "okay"; +}; + +&serial_1 { + status = "okay"; +}; + +&serial_2 { + status = "okay"; +}; + +&serial_3 { + status = "okay"; }; -- 2.1.0
next prev parent reply other threads:[~2015-04-17 13:49 UTC|newest] Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-04-17 13:47 [PATCH v3 00/11] ARM: dts: exynos4: labels for overriding nodes Krzysztof Kozlowski 2015-04-17 13:47 ` Krzysztof Kozlowski 2015-04-17 13:47 ` [PATCH v3 01/11] ARM: dts: Add labels to Exynos4 nodes Krzysztof Kozlowski 2015-04-17 13:47 ` Krzysztof Kozlowski 2015-04-17 13:47 ` [PATCH v3 02/11] ARM: dts: exynos4: Use labels for overriding nodes in Exynos4210 Krzysztof Kozlowski 2015-04-17 13:47 ` Krzysztof Kozlowski 2015-04-17 13:47 ` Krzysztof Kozlowski 2015-04-17 13:47 ` [PATCH v3 03/11] ARM: dts: exynos4: Use labels for overriding nodes in Exynos4210 Origen Krzysztof Kozlowski 2015-04-17 13:47 ` Krzysztof Kozlowski 2015-04-17 13:47 ` [PATCH v3 04/11] ARM: dts: exynos4: Use labels for overriding nodes in SMDKv310 Krzysztof Kozlowski 2015-04-17 13:47 ` Krzysztof Kozlowski 2015-04-17 13:47 ` Krzysztof Kozlowski 2015-04-17 13:47 ` [PATCH v3 05/11] ARM: dts: exynos4: Use labels for overriding nodes in Trats Krzysztof Kozlowski 2015-04-17 13:47 ` Krzysztof Kozlowski 2015-04-17 13:47 ` [PATCH v3 06/11] ARM: dts: exynos4: Use labels for overriding nodes in Exynos4212 Krzysztof Kozlowski 2015-04-17 13:47 ` Krzysztof Kozlowski 2015-04-17 13:47 ` [PATCH v3 07/11] ARM: dts: exynos4: Use labels for overriding nodes in Exynos4x12 Krzysztof Kozlowski 2015-04-17 13:47 ` Krzysztof Kozlowski 2015-04-17 13:47 ` [PATCH v3 08/11] ARM: dts: exynos4: Use labels for overriding nodes in Exynos4412 Krzysztof Kozlowski 2015-04-17 13:47 ` Krzysztof Kozlowski 2015-04-17 13:47 ` [PATCH v3 09/11] ARM: dts: exynos4: Use labels for overriding nodes in Odroid Krzysztof Kozlowski 2015-04-17 13:47 ` Krzysztof Kozlowski 2015-04-17 13:47 ` Krzysztof Kozlowski [this message] 2015-04-17 13:47 ` [PATCH v3 10/11] ARM: dts: exynos4: Use labels for overriding nodes in SMDK4412 Krzysztof Kozlowski 2015-04-17 13:47 ` [PATCH v3 11/11] ARM: dts: exynos4: Use labels for overriding nodes in Trats2 Krzysztof Kozlowski 2015-04-17 13:47 ` Krzysztof Kozlowski
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1429278439-3919-11-git-send-email-k.kozlowski.k@gmail.com \ --to=k.kozlowski.k@gmail.com \ --cc=arnd@arndb.de \ --cc=devicetree@vger.kernel.org \ --cc=kgene@kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-samsung-soc@vger.kernel.org \ --cc=olof@lixom.net \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.