All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sudeep Holla <sudeep.holla@arm.com>
To: linux-kernel@vger.kernel.org
Cc: Sudeep Holla <sudeep.holla@arm.com>,
	Liviu Dudau <Liviu.Dudau@arm.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	"Jon Medhurst (Tixy)" <tixy@linaro.org>,
	Viresh Kumar <viresh.kumar@linaro.org>,
	"Rafael J. Wysocki" <rjw@rjwysocki.net>,
	linux-pm@vger.kernel.org
Subject: [PATCH 4/4] cpufreq: arm_big_little: add SCPI interface driver
Date: Mon, 27 Apr 2015 12:40:46 +0100	[thread overview]
Message-ID: <1430134846-24320-5-git-send-email-sudeep.holla@arm.com> (raw)
In-Reply-To: <1430134846-24320-1-git-send-email-sudeep.holla@arm.com>

On some ARM based systems, a separate Cortex-M based System Control
Processor(SCP) provides the overall power, clock, reset and system
control including CPU DVFS. SCPI Message Protocol is used to
communicate with the SCPI.

This patch adds a interface driver for adding OPPs and registering
the arm_big_little cpufreq driver for such systems.

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: linux-pm@vger.kernel.org
---
 drivers/cpufreq/Kconfig.arm    |   9 ++++
 drivers/cpufreq/Makefile       |   1 +
 drivers/cpufreq/scpi-cpufreq.c | 103 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 113 insertions(+)
 create mode 100644 drivers/cpufreq/scpi-cpufreq.c

diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 4f3dbc8cf729..9e678bf1687c 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -24,6 +24,15 @@ config ARM_VEXPRESS_SPC_CPUFREQ
           This add the CPUfreq driver support for Versatile Express
 	  big.LITTLE platforms using SPC for power management.
 
+config ARM_SCPI_CPUFREQ
+        tristate "SCPI based CPUfreq driver"
+	depends on ARM_BIG_LITTLE_CPUFREQ && ARM_SCPI_PROTOCOL
+        help
+          This add the CPUfreq driver support for ARM big.LITTLE platforms
+	  using SCPI interface for CPU power management.
+
+	  This driver works only if firmware the supporting CPU DVFS adhere
+	  to SCPI protocol.
 
 config ARM_EXYNOS_CPUFREQ
 	tristate "SAMSUNG EXYNOS CPUfreq Driver"
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index cdce92ae2e8b..02fc9f849d4b 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -79,6 +79,7 @@ obj-$(CONFIG_ARM_SA1110_CPUFREQ)	+= sa1110-cpufreq.o
 obj-$(CONFIG_ARM_SPEAR_CPUFREQ)		+= spear-cpufreq.o
 obj-$(CONFIG_ARM_TEGRA_CPUFREQ)		+= tegra-cpufreq.o
 obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ)	+= vexpress-spc-cpufreq.o
+obj-$(CONFIG_ARM_SCPI_CPUFREQ)		+= scpi-cpufreq.o
 
 ##################################################################################
 # PowerPC platform drivers
diff --git a/drivers/cpufreq/scpi-cpufreq.c b/drivers/cpufreq/scpi-cpufreq.c
new file mode 100644
index 000000000000..4c2c11a9dfc6
--- /dev/null
+++ b/drivers/cpufreq/scpi-cpufreq.c
@@ -0,0 +1,103 @@
+/*
+ * SCPI CPUFreq Interface driver
+ *
+ * It provides necessary ops to arm_big_little cpufreq driver.
+ *
+ * Copyright (C) 2015 ARM Ltd.
+ * Sudeep Holla <sudeep.holla@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/cpufreq.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/scpi_protocol.h>
+#include <linux/types.h>
+
+#include "arm_big_little.h"
+
+static struct scpi_ops *scpi_ops;
+
+static int scpi_init_opp_table(struct device *cpu_dev)
+{
+	u8 domain = topology_physical_package_id(cpu_dev->id);
+	struct scpi_dvfs_info *info;
+	struct scpi_opp *opp;
+	int idx, ret = 0;
+
+	if ((dev_pm_opp_get_opp_count(cpu_dev)) > 0)
+		return 0;
+	info = scpi_ops->dvfs_get_info(domain);
+	if (IS_ERR(info))
+		return PTR_ERR(info);
+
+	opp = info->opps;
+	if (!opp)
+		return -EIO;
+
+	for (idx = 0; idx < info->count; idx++, opp++) {
+		ret = dev_pm_opp_add(cpu_dev, opp->freq, opp->m_volt * 1000);
+		if (ret) {
+			dev_warn(cpu_dev, "failed to add opp %uHz %umV\n",
+				 opp->freq, opp->m_volt);
+			return ret;
+		}
+	}
+	return ret;
+}
+
+static int scpi_get_transition_latency(struct device *cpu_dev)
+{
+	u8 domain = topology_physical_package_id(cpu_dev->id);
+	struct scpi_dvfs_info *info;
+
+	info = scpi_ops->dvfs_get_info(domain);
+	if (IS_ERR(info))
+		return PTR_ERR(info);
+
+	return info->latency;
+}
+
+static struct cpufreq_arm_bL_ops scpi_cpufreq_ops = {
+	.name	= "scpi",
+	.get_transition_latency = scpi_get_transition_latency,
+	.init_opp_table = scpi_init_opp_table,
+};
+
+static int scpi_cpufreq_probe(struct platform_device *pdev)
+{
+	scpi_ops = get_scpi_ops();
+	if (!scpi_ops)
+		return -EIO;
+
+	return bL_cpufreq_register(&scpi_cpufreq_ops);
+}
+
+static int scpi_cpufreq_remove(struct platform_device *pdev)
+{
+	bL_cpufreq_unregister(&scpi_cpufreq_ops);
+	return 0;
+}
+
+static struct platform_driver scpi_cpufreq_platdrv = {
+	.driver = {
+		.name	= "scpi-cpufreq",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= scpi_cpufreq_probe,
+	.remove		= scpi_cpufreq_remove,
+};
+module_platform_driver(scpi_cpufreq_platdrv);
+
+MODULE_LICENSE("GPL");
-- 
1.9.1


  parent reply	other threads:[~2015-04-27 11:41 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-27 11:40 [PATCH 0/4] ARM64: add SCPI mailbox protocol, clock and CPUFreq support Sudeep Holla
2015-04-27 11:40 ` [PATCH 1/4] mailbox: add support for System Control and Power Interface(SCPI) protocol Sudeep Holla
2015-04-27 11:40   ` Sudeep Holla
2015-04-28  7:36   ` Paul Bolle
2015-04-28  8:41     ` Sudeep Holla
2015-04-28 13:54   ` Jon Medhurst (Tixy)
2015-04-29 10:53     ` Sudeep Holla
2015-04-29 11:43       ` Jon Medhurst (Tixy)
2015-04-29 12:25         ` Jon Medhurst (Tixy)
2015-04-29 13:08           ` Sudeep Holla
2015-04-30  8:49           ` Jon Medhurst (Tixy)
2015-04-29 13:01         ` Sudeep Holla
2015-05-13 16:52   ` Jassi Brar
2015-05-13 17:09     ` Sudeep Holla
2015-05-14  7:02       ` Jassi Brar
2015-05-14  7:02         ` Jassi Brar
2015-05-14  7:30         ` Jassi Brar
2015-05-14  8:25           ` Sudeep Holla
2015-05-14  8:25             ` Sudeep Holla
2015-04-27 11:40 ` [PATCH 2/4] clk: add support for clocks provided by SCP(System Control Processor) Sudeep Holla
2015-05-07 10:17   ` Lorenzo Pieralisi
2015-05-20 23:43   ` Stephen Boyd
2015-05-26 13:14     ` Sudeep Holla
2015-04-27 11:40 ` [PATCH 3/4] clk: scpi: add support for cpufreq virtual device Sudeep Holla
2015-05-20 23:45   ` Stephen Boyd
2015-05-26 13:25     ` Sudeep Holla
2015-04-27 11:40 ` Sudeep Holla [this message]
2015-04-29  5:44   ` [PATCH 4/4] cpufreq: arm_big_little: add SCPI interface driver Viresh Kumar
2015-04-29  9:39     ` Sudeep Holla
2015-05-01 13:19   ` Jon Medhurst (Tixy)
2015-05-01 13:32     ` Sudeep Holla
2015-05-01 14:12       ` Jon Medhurst (Tixy)
2015-05-01 14:15         ` Sudeep Holla
2015-05-01 17:10           ` Jon Medhurst (Tixy)
2015-05-01 17:14             ` Sudeep Holla
2015-04-27 18:11 ` [PATCH 0/4] ARM64: add SCPI mailbox protocol, clock and CPUFreq support Jon Medhurst (Tixy)
2015-04-28  8:47   ` Sudeep Holla
2015-04-28 14:21   ` Sudeep Holla

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1430134846-24320-5-git-send-email-sudeep.holla@arm.com \
    --to=sudeep.holla@arm.com \
    --cc=Liviu.Dudau@arm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=rjw@rjwysocki.net \
    --cc=tixy@linaro.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.