From: Suman Tripathi <stripathi@apm.com> To: chris@printf.net, anton@enomsg.org, arnd@arndb.de, michal.simek@xilinx.com Cc: linux-mmc@vger.kernel.org, linuxppc-dev@lists.ozlabs.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, ddutile@redhat.com, jcm@redhat.com, mlangsdo@redhat.com, patches@apm.com, Suman Tripathi <stripathi@apm.com> Subject: [PATCH v3 1/3] arm64: dts: Add the arasan sdhc nodes in apm-storm.dtsi. Date: Fri, 1 May 2015 10:24:10 +0530 [thread overview] Message-ID: <1430456052-8888-2-git-send-email-stripathi@apm.com> (raw) In-Reply-To: <1430456052-8888-1-git-send-email-stripathi@apm.com> This patch adds the arasan sdhc nodes to reuse the of-arasan driver for APM X-Gene SoC. Signed-off-by: Suman Tripathi <stripathi@apm.com> --- arch/arm64/boot/dts/apm-mustang.dts | 4 ++++ arch/arm64/boot/dts/apm-storm.dtsi | 44 +++++++++++++++++++++++++++++++++++++ 2 files changed, 48 insertions(+) diff --git a/arch/arm64/boot/dts/apm-mustang.dts b/arch/arm64/boot/dts/apm-mustang.dts index 8eb6d94..d0e52a9 100644 --- a/arch/arm64/boot/dts/apm-mustang.dts +++ b/arch/arm64/boot/dts/apm-mustang.dts @@ -44,3 +44,7 @@ &xgenet { status = "ok"; }; + +&sdhc0 { + status = "ok"; +}; diff --git a/arch/arm64/boot/dts/apm-storm.dtsi b/arch/arm64/boot/dts/apm-storm.dtsi index 87d3205..d6c2216 100644 --- a/arch/arm64/boot/dts/apm-storm.dtsi +++ b/arch/arm64/boot/dts/apm-storm.dtsi @@ -144,6 +144,40 @@ clock-output-names = "socplldiv2"; }; + ahbclk: ahbclk@1f2ac000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f2ac000 0x0 0x1000 + 0x0 0x17000000 0x0 0x2000>; + reg-names = "csr-reg", "div-reg"; + csr-offset = <0x0>; + csr-mask = <0x1>; + enable-offset = <0x8>; + enable-mask = <0x1>; + divider-offset = <0x164>; + divider-width = <0x5>; + divider-shift = <0x0>; + clock-output-names = "ahbclk"; + }; + + sdioclk: sdioclk@1f2ac000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f2ac000 0x0 0x1000 + 0x0 0x17000000 0x0 0x2000>; + reg-names = "csr-reg", "div-reg"; + csr-offset = <0x0>; + csr-mask = <0x2>; + enable-offset = <0x8>; + enable-mask = <0x2>; + divider-offset = <0x178>; + divider-width = <0x8>; + divider-shift = <0x0>; + clock-output-names = "sdioclk"; + }; + qmlclk: qmlclk { compatible = "apm,xgene-device-clock"; #clock-cells = <1>; @@ -503,6 +537,16 @@ interrupts = <0x0 0x4f 0x4>; }; + sdhc0: sdhc@1c000000 { + device_type = "sdhc"; + compatible = "arasan,sdhci-8.9a", "arasan,sdhci-4.9a"; + reg = <0x0 0x1c000000 0x0 0x100>; + interrupts = <0x0 0x49 0x4>; + dma-coherent; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&sdioclk 0>, <&ahbclk 0>; + }; + phy1: phy@1f21a000 { compatible = "apm,xgene-phy"; reg = <0x0 0x1f21a000 0x0 0x100>; -- 1.8.2.1
WARNING: multiple messages have this Message-ID (diff)
From: Suman Tripathi <stripathi@apm.com> To: chris@printf.net, anton@enomsg.org, arnd@arndb.de, michal.simek@xilinx.com Cc: devicetree@vger.kernel.org, mlangsdo@redhat.com, Suman Tripathi <stripathi@apm.com>, jcm@redhat.com, linux-mmc@vger.kernel.org, patches@apm.com, ddutile@redhat.com, linuxppc-dev@lists.ozlabs.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 1/3] arm64: dts: Add the arasan sdhc nodes in apm-storm.dtsi. Date: Fri, 1 May 2015 10:24:10 +0530 [thread overview] Message-ID: <1430456052-8888-2-git-send-email-stripathi@apm.com> (raw) In-Reply-To: <1430456052-8888-1-git-send-email-stripathi@apm.com> This patch adds the arasan sdhc nodes to reuse the of-arasan driver for APM X-Gene SoC. Signed-off-by: Suman Tripathi <stripathi@apm.com> --- arch/arm64/boot/dts/apm-mustang.dts | 4 ++++ arch/arm64/boot/dts/apm-storm.dtsi | 44 +++++++++++++++++++++++++++++++++++++ 2 files changed, 48 insertions(+) diff --git a/arch/arm64/boot/dts/apm-mustang.dts b/arch/arm64/boot/dts/apm-mustang.dts index 8eb6d94..d0e52a9 100644 --- a/arch/arm64/boot/dts/apm-mustang.dts +++ b/arch/arm64/boot/dts/apm-mustang.dts @@ -44,3 +44,7 @@ &xgenet { status = "ok"; }; + +&sdhc0 { + status = "ok"; +}; diff --git a/arch/arm64/boot/dts/apm-storm.dtsi b/arch/arm64/boot/dts/apm-storm.dtsi index 87d3205..d6c2216 100644 --- a/arch/arm64/boot/dts/apm-storm.dtsi +++ b/arch/arm64/boot/dts/apm-storm.dtsi @@ -144,6 +144,40 @@ clock-output-names = "socplldiv2"; }; + ahbclk: ahbclk@1f2ac000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f2ac000 0x0 0x1000 + 0x0 0x17000000 0x0 0x2000>; + reg-names = "csr-reg", "div-reg"; + csr-offset = <0x0>; + csr-mask = <0x1>; + enable-offset = <0x8>; + enable-mask = <0x1>; + divider-offset = <0x164>; + divider-width = <0x5>; + divider-shift = <0x0>; + clock-output-names = "ahbclk"; + }; + + sdioclk: sdioclk@1f2ac000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f2ac000 0x0 0x1000 + 0x0 0x17000000 0x0 0x2000>; + reg-names = "csr-reg", "div-reg"; + csr-offset = <0x0>; + csr-mask = <0x2>; + enable-offset = <0x8>; + enable-mask = <0x2>; + divider-offset = <0x178>; + divider-width = <0x8>; + divider-shift = <0x0>; + clock-output-names = "sdioclk"; + }; + qmlclk: qmlclk { compatible = "apm,xgene-device-clock"; #clock-cells = <1>; @@ -503,6 +537,16 @@ interrupts = <0x0 0x4f 0x4>; }; + sdhc0: sdhc@1c000000 { + device_type = "sdhc"; + compatible = "arasan,sdhci-8.9a", "arasan,sdhci-4.9a"; + reg = <0x0 0x1c000000 0x0 0x100>; + interrupts = <0x0 0x49 0x4>; + dma-coherent; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&sdioclk 0>, <&ahbclk 0>; + }; + phy1: phy@1f21a000 { compatible = "apm,xgene-phy"; reg = <0x0 0x1f21a000 0x0 0x100>; -- 1.8.2.1
next prev parent reply other threads:[~2015-05-01 4:54 UTC|newest] Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-05-01 4:54 [PATCH v3 0/3] Add SDHCI support for APM X-Gene SoC using ARASAN SDHCI controller Suman Tripathi 2015-05-01 4:54 ` Suman Tripathi 2015-05-01 4:54 ` Suman Tripathi [this message] 2015-05-01 4:54 ` [PATCH v3 1/3] arm64: dts: Add the arasan sdhc nodes in apm-storm.dtsi Suman Tripathi 2015-05-04 6:03 ` Michal Simek 2015-05-04 6:03 ` Michal Simek 2015-05-04 6:03 ` Michal Simek 2015-05-04 6:14 ` Suman Tripathi 2015-05-04 6:14 ` Suman Tripathi 2015-05-04 6:14 ` Suman Tripathi [not found] ` <1430456052-8888-1-git-send-email-stripathi-qTEPVZfXA3Y@public.gmane.org> 2015-05-01 4:54 ` [PATCH v3 2/3] mmc: host: arasan: Add the support for sdhci-arasan4.9a in sdhci-of-arasan.c Suman Tripathi 2015-05-01 4:54 ` Suman Tripathi 2015-05-01 4:54 ` [PATCH v3 3/3] Documentation: mmc: Update Arasan SDHC documentation to support 4.9a version of Arasan SDHC controller Suman Tripathi 2015-05-01 4:54 ` Suman Tripathi [not found] ` <1430456052-8888-4-git-send-email-stripathi-qTEPVZfXA3Y@public.gmane.org> 2015-05-04 6:00 ` Michal Simek 2015-05-04 6:00 ` Michal Simek 2015-05-04 6:00 ` Michal Simek 2015-05-04 6:03 ` Suman Tripathi 2015-05-04 6:03 ` Suman Tripathi 2015-05-04 6:03 ` Suman Tripathi [not found] ` <CAOHikRBbOYHOmnzA6Ycu6hwdNL6SgmXKVK0NLtJQfJL9KULuxg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2015-05-04 6:29 ` Michal Simek 2015-05-04 6:29 ` Michal Simek 2015-05-04 6:29 ` Michal Simek
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1430456052-8888-2-git-send-email-stripathi@apm.com \ --to=stripathi@apm.com \ --cc=anton@enomsg.org \ --cc=arnd@arndb.de \ --cc=chris@printf.net \ --cc=ddutile@redhat.com \ --cc=devicetree@vger.kernel.org \ --cc=jcm@redhat.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-mmc@vger.kernel.org \ --cc=linuxppc-dev@lists.ozlabs.org \ --cc=michal.simek@xilinx.com \ --cc=mlangsdo@redhat.com \ --cc=patches@apm.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.