All of lore.kernel.org
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
To: Kukjin Kim <kgene@kernel.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Subject: [PATCH v3 3/8] ARM: dts: Remove duplicated I2C7 nodes in exynos5250-snow
Date: Thu, 14 May 2015 19:53:48 +0900	[thread overview]
Message-ID: <1431600833-3361-4-git-send-email-k.kozlowski.k@gmail.com> (raw)
In-Reply-To: <1431600833-3361-1-git-send-email-k.kozlowski.k@gmail.com>

The i2c_7 node (i2c@12CD0000) with LVDS bridge child node was put in
Exynos5250 Snow DTS file twice. Move the LVDS bridge to proper existing
i2c_7 node.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
---
 arch/arm/boot/dts/exynos5250-snow.dts | 46 +++++++++++++++++------------------
 1 file changed, 22 insertions(+), 24 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 1eca97ee4bd6..b7f4122df456 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -177,30 +177,6 @@
 		};
 	};
 
-	i2c@12CD0000 {
-		ptn3460: lvds-bridge@20 {
-			compatible = "nxp,ptn3460";
-			reg = <0x20>;
-			powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
-			reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
-			edid-emulation = <5>;
-
-			ports {
-				port@0 {
-					bridge_out: endpoint {
-						remote-endpoint = <&panel_in>;
-					};
-				};
-
-				port@1 {
-					bridge_in: endpoint {
-						remote-endpoint = <&dp_out>;
-					};
-				};
-			};
-		};
-	};
-
 	sound {
 		compatible = "google,snow-audio-max98095";
 
@@ -507,6 +483,28 @@
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-max-bus-freq = <66000>;
 
+	ptn3460: lvds-bridge@20 {
+		compatible = "nxp,ptn3460";
+		reg = <0x20>;
+		powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
+		edid-emulation = <5>;
+
+		ports {
+			port@0 {
+				bridge_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+
+			port@1 {
+				bridge_in: endpoint {
+					remote-endpoint = <&dp_out>;
+				};
+			};
+		};
+	};
+
 	max98095: codec@11 {
 		compatible = "maxim,max98095";
 		reg = <0x11>;
-- 
2.1.4


WARNING: multiple messages have this Message-ID (diff)
From: k.kozlowski.k@gmail.com (Krzysztof Kozlowski)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 3/8] ARM: dts: Remove duplicated I2C7 nodes in exynos5250-snow
Date: Thu, 14 May 2015 19:53:48 +0900	[thread overview]
Message-ID: <1431600833-3361-4-git-send-email-k.kozlowski.k@gmail.com> (raw)
In-Reply-To: <1431600833-3361-1-git-send-email-k.kozlowski.k@gmail.com>

The i2c_7 node (i2c at 12CD0000) with LVDS bridge child node was put in
Exynos5250 Snow DTS file twice. Move the LVDS bridge to proper existing
i2c_7 node.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
---
 arch/arm/boot/dts/exynos5250-snow.dts | 46 +++++++++++++++++------------------
 1 file changed, 22 insertions(+), 24 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 1eca97ee4bd6..b7f4122df456 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -177,30 +177,6 @@
 		};
 	};
 
-	i2c at 12CD0000 {
-		ptn3460: lvds-bridge at 20 {
-			compatible = "nxp,ptn3460";
-			reg = <0x20>;
-			powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
-			reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
-			edid-emulation = <5>;
-
-			ports {
-				port at 0 {
-					bridge_out: endpoint {
-						remote-endpoint = <&panel_in>;
-					};
-				};
-
-				port at 1 {
-					bridge_in: endpoint {
-						remote-endpoint = <&dp_out>;
-					};
-				};
-			};
-		};
-	};
-
 	sound {
 		compatible = "google,snow-audio-max98095";
 
@@ -507,6 +483,28 @@
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-max-bus-freq = <66000>;
 
+	ptn3460: lvds-bridge at 20 {
+		compatible = "nxp,ptn3460";
+		reg = <0x20>;
+		powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
+		edid-emulation = <5>;
+
+		ports {
+			port at 0 {
+				bridge_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+
+			port at 1 {
+				bridge_in: endpoint {
+					remote-endpoint = <&dp_out>;
+				};
+			};
+		};
+	};
+
 	max98095: codec at 11 {
 		compatible = "maxim,max98095";
 		reg = <0x11>;
-- 
2.1.4

  parent reply	other threads:[~2015-05-14 10:57 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-14 10:53 [PATCH v3 0/8] ARM: dts: exynos5: labels for overriding nodes Krzysztof Kozlowski
2015-05-14 10:53 ` Krzysztof Kozlowski
2015-05-14 10:53 ` [PATCH v3 1/8] ARM: dts: Add labels to exynos5 nodes Krzysztof Kozlowski
2015-05-14 10:53   ` Krzysztof Kozlowski
2015-05-14 10:53 ` [PATCH v3 2/8] ARM: dts: Use labels for overriding nodes in exynos5250 Krzysztof Kozlowski
2015-05-14 10:53   ` Krzysztof Kozlowski
2015-05-14 10:53 ` Krzysztof Kozlowski [this message]
2015-05-14 10:53   ` [PATCH v3 3/8] ARM: dts: Remove duplicated I2C7 nodes in exynos5250-snow Krzysztof Kozlowski
2015-05-14 10:53 ` [PATCH v3 4/8] ARM: dts: Use labels for overriding nodes in exynos5420-arndale-octa Krzysztof Kozlowski
2015-05-14 10:53   ` Krzysztof Kozlowski
2015-05-14 10:53 ` [PATCH v3 5/8] ARM: dts: Use labels for overriding nodes in exynos542x Krzysztof Kozlowski
2015-05-14 10:53   ` Krzysztof Kozlowski
2015-05-14 10:53 ` [PATCH v3 6/8] ARM: dts: Use labels for overriding nodes in exynos5420-smdk5420 Krzysztof Kozlowski
2015-05-14 10:53   ` Krzysztof Kozlowski
2015-05-14 10:53 ` [PATCH v3 7/8] ARM: dts: Use labels for overriding nodes in exynos5440 boards Krzysztof Kozlowski
2015-05-14 10:53   ` Krzysztof Kozlowski
2015-05-14 10:53 ` [PATCH v3 8/8] ARM: dts: Use labels for overriding nodes in exynos5422-odroidxu3 Krzysztof Kozlowski
2015-05-14 10:53   ` Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1431600833-3361-4-git-send-email-k.kozlowski.k@gmail.com \
    --to=k.kozlowski.k@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kgene@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.