From: Yingjoe Chen <yingjoe.chen@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>
Cc: <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
<linux-mediatek@lists.infradead.org>,
<srv_heupstream@mediatek.com>,
Yingjoe Chen <yingjoe.chen@mediatek.com>
Subject: [PATCH] ARM: dts: mt8127: correct uart instance address
Date: Sat, 16 May 2015 15:30:11 +0800 [thread overview]
Message-ID: <1431761411-29516-1-git-send-email-yingjoe.chen@mediatek.com> (raw)
This is based on v4.1-rc1
------------8<-------------------------------------------
The instance address for uart nodes are incorrect. Correct them.
Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
---
arch/arm/boot/dts/mt8127.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/mt8127.dtsi b/arch/arm/boot/dts/mt8127.dtsi
index aaa7862..ca3402e 100644
--- a/arch/arm/boot/dts/mt8127.dtsi
+++ b/arch/arm/boot/dts/mt8127.dtsi
@@ -107,7 +107,7 @@
<0 0x10216000 0 0x2000>;
};
- uart0: serial@11006000 {
+ uart0: serial@11002000 {
compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
reg = <0 0x11002000 0 0x400>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
@@ -115,7 +115,7 @@
status = "disabled";
};
- uart1: serial@11007000 {
+ uart1: serial@11003000 {
compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
reg = <0 0x11003000 0 0x400>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
@@ -123,7 +123,7 @@
status = "disabled";
};
- uart2: serial@11008000 {
+ uart2: serial@11004000 {
compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
reg = <0 0x11004000 0 0x400>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
@@ -131,7 +131,7 @@
status = "disabled";
};
- uart3: serial@11009000 {
+ uart3: serial@11005000 {
compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
reg = <0 0x11005000 0 0x400>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
--
1.8.1.1.dirty
WARNING: multiple messages have this Message-ID (diff)
From: Yingjoe Chen <yingjoe.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
To: Matthias Brugger <matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
srv_heupstream-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org,
Yingjoe Chen
<yingjoe.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Subject: [PATCH] ARM: dts: mt8127: correct uart instance address
Date: Sat, 16 May 2015 15:30:11 +0800 [thread overview]
Message-ID: <1431761411-29516-1-git-send-email-yingjoe.chen@mediatek.com> (raw)
This is based on v4.1-rc1
------------8<-------------------------------------------
The instance address for uart nodes are incorrect. Correct them.
Signed-off-by: Yingjoe Chen <yingjoe.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
arch/arm/boot/dts/mt8127.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/mt8127.dtsi b/arch/arm/boot/dts/mt8127.dtsi
index aaa7862..ca3402e 100644
--- a/arch/arm/boot/dts/mt8127.dtsi
+++ b/arch/arm/boot/dts/mt8127.dtsi
@@ -107,7 +107,7 @@
<0 0x10216000 0 0x2000>;
};
- uart0: serial@11006000 {
+ uart0: serial@11002000 {
compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
reg = <0 0x11002000 0 0x400>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
@@ -115,7 +115,7 @@
status = "disabled";
};
- uart1: serial@11007000 {
+ uart1: serial@11003000 {
compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
reg = <0 0x11003000 0 0x400>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
@@ -123,7 +123,7 @@
status = "disabled";
};
- uart2: serial@11008000 {
+ uart2: serial@11004000 {
compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
reg = <0 0x11004000 0 0x400>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
@@ -131,7 +131,7 @@
status = "disabled";
};
- uart3: serial@11009000 {
+ uart3: serial@11005000 {
compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
reg = <0 0x11005000 0 0x400>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
--
1.8.1.1.dirty
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: yingjoe.chen@mediatek.com (Yingjoe Chen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: mt8127: correct uart instance address
Date: Sat, 16 May 2015 15:30:11 +0800 [thread overview]
Message-ID: <1431761411-29516-1-git-send-email-yingjoe.chen@mediatek.com> (raw)
This is based on v4.1-rc1
------------8<-------------------------------------------
The instance address for uart nodes are incorrect. Correct them.
Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
---
arch/arm/boot/dts/mt8127.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/mt8127.dtsi b/arch/arm/boot/dts/mt8127.dtsi
index aaa7862..ca3402e 100644
--- a/arch/arm/boot/dts/mt8127.dtsi
+++ b/arch/arm/boot/dts/mt8127.dtsi
@@ -107,7 +107,7 @@
<0 0x10216000 0 0x2000>;
};
- uart0: serial at 11006000 {
+ uart0: serial at 11002000 {
compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
reg = <0 0x11002000 0 0x400>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
@@ -115,7 +115,7 @@
status = "disabled";
};
- uart1: serial at 11007000 {
+ uart1: serial at 11003000 {
compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
reg = <0 0x11003000 0 0x400>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
@@ -123,7 +123,7 @@
status = "disabled";
};
- uart2: serial at 11008000 {
+ uart2: serial at 11004000 {
compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
reg = <0 0x11004000 0 0x400>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
@@ -131,7 +131,7 @@
status = "disabled";
};
- uart3: serial at 11009000 {
+ uart3: serial at 11005000 {
compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
reg = <0 0x11005000 0 0x400>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
--
1.8.1.1.dirty
next reply other threads:[~2015-05-16 7:30 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-16 7:30 Yingjoe Chen [this message]
2015-05-16 7:30 ` [PATCH] ARM: dts: mt8127: correct uart instance address Yingjoe Chen
2015-05-16 7:30 ` Yingjoe Chen
2015-05-16 8:22 ` Matthias Brugger
2015-05-16 8:22 ` Matthias Brugger
2015-05-16 8:22 ` Matthias Brugger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1431761411-29516-1-git-send-email-yingjoe.chen@mediatek.com \
--to=yingjoe.chen@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=srv_heupstream@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.