All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
To: Peter Ujfalusi <peter.ujfalusi@ti.com>,
	Jarkko Nikula <jarkko.nikula@bitmer.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>
Cc: Sebastian Reichel <sre@kernel.org>,
	linux-omap@vger.kernel.org, alsa-devel@alsa-project.org,
	kernel@pengutronix.de, Linus Walleij <linus.walleij@linaro.org>,
	Alexandre Courbot <gnurou@gmail.com>
Subject: [PATCH] ASoC: rx51: use flags argument of devm_gpiod_get to set direction
Date: Tue, 19 May 2015 09:48:08 +0200	[thread overview]
Message-ID: <1432021688-25830-1-git-send-email-u.kleine-koenig@pengutronix.de> (raw)

Since 39b2bbe3d715 (gpio: add flags argument to gpiod_get*() functions)
which appeared in v3.17-rc1, the gpiod_get* functions take an additional
parameter that allows to specify direction and initial value for output.

Use this to simplify the driver. Furthermore this is one caller less
that stops us making the flags argument to gpiod_get*() mandatory.

Fixes: 386e81ab3b4d ("ASoC: omap: rx51: get GPIO numbers via gpiod API")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 sound/soc/omap/rx51.c | 30 ++++++++----------------------
 1 file changed, 8 insertions(+), 22 deletions(-)

diff --git a/sound/soc/omap/rx51.c b/sound/soc/omap/rx51.c
index c2ddf0fbfa28..fded99362d39 100644
--- a/sound/soc/omap/rx51.c
+++ b/sound/soc/omap/rx51.c
@@ -455,50 +455,36 @@ static int rx51_soc_probe(struct platform_device *pdev)
 	snd_soc_card_set_drvdata(card, pdata);
 
 	pdata->tvout_selection_gpio = devm_gpiod_get(card->dev,
-						     "tvout-selection");
+						     "tvout-selection",
+						     GPIOD_OUT_LOW);
 	if (IS_ERR(pdata->tvout_selection_gpio)) {
 		dev_err(card->dev, "could not get tvout selection gpio\n");
 		return PTR_ERR(pdata->tvout_selection_gpio);
 	}
 
-	err = gpiod_direction_output(pdata->tvout_selection_gpio, 0);
-	if (err) {
-		dev_err(card->dev, "could not setup tvout selection gpio\n");
-		return err;
-	}
-
 	pdata->jack_detection_gpio = devm_gpiod_get(card->dev,
-						    "jack-detection");
+						    "jack-detection",
+						    GPIOD_ASIS);
 	if (IS_ERR(pdata->jack_detection_gpio)) {
 		dev_err(card->dev, "could not get jack detection gpio\n");
 		return PTR_ERR(pdata->jack_detection_gpio);
 	}
 
-	pdata->eci_sw_gpio = devm_gpiod_get(card->dev, "eci-switch");
+	pdata->eci_sw_gpio = devm_gpiod_get(card->dev, "eci-switch",
+					    GPIOD_OUT_HIGH);
 	if (IS_ERR(pdata->eci_sw_gpio)) {
 		dev_err(card->dev, "could not get eci switch gpio\n");
 		return PTR_ERR(pdata->eci_sw_gpio);
 	}
 
-	err = gpiod_direction_output(pdata->eci_sw_gpio, 1);
-	if (err) {
-		dev_err(card->dev, "could not setup eci switch gpio\n");
-		return err;
-	}
-
 	pdata->speaker_amp_gpio = devm_gpiod_get(card->dev,
-						 "speaker-amplifier");
+						 "speaker-amplifier",
+						 GPIOD_OUT_LOW);
 	if (IS_ERR(pdata->speaker_amp_gpio)) {
 		dev_err(card->dev, "could not get speaker enable gpio\n");
 		return PTR_ERR(pdata->speaker_amp_gpio);
 	}
 
-	err = gpiod_direction_output(pdata->speaker_amp_gpio, 0);
-	if (err) {
-		dev_err(card->dev, "could not setup speaker enable gpio\n");
-		return err;
-	}
-
 	err = devm_snd_soc_register_card(card->dev, card);
 	if (err) {
 		dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", err);
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

             reply	other threads:[~2015-05-19  7:48 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-19  7:48 Uwe Kleine-König [this message]
2015-05-19  8:16 ` [PATCH] ASoC: rx51: use flags argument of devm_gpiod_get to set direction Jarkko Nikula
2015-05-19 10:44   ` Mark Brown
2015-05-19 12:10     ` Uwe Kleine-König
2015-05-20 18:09 ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1432021688-25830-1-git-send-email-u.kleine-koenig@pengutronix.de \
    --to=u.kleine-koenig@pengutronix.de \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=gnurou@gmail.com \
    --cc=jarkko.nikula@bitmer.com \
    --cc=kernel@pengutronix.de \
    --cc=lgirdwood@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=peter.ujfalusi@ti.com \
    --cc=sre@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.