All of lore.kernel.org
 help / color / mirror / Atom feed
From: William Towle <william.towle@codethink.co.uk>
To: linux-kernel@lists.codethink.co.uk, linux-media@vger.kernel.org
Cc: g.liakhovetski@gmx.de, sergei.shtylyov@cogentembedded.com,
	hverkuil@xs4all.nl, rob.taylor@codethink.co.uk
Subject: [PATCH 03/20] media: adv7604: chip info and formats for ADV7612
Date: Wed, 20 May 2015 17:39:23 +0100	[thread overview]
Message-ID: <1432139980-12619-4-git-send-email-william.towle@codethink.co.uk> (raw)
In-Reply-To: <1432139980-12619-1-git-send-email-william.towle@codethink.co.uk>

Add support for the ADV7612 chip as implemented on Renesas' Lager
board to adv7604.c, including lists for formats/colourspace/timing
selection and an IRQ handler.

Signed-off-by: William Towle <william.towle@codethink.co.uk>
---
 drivers/media/i2c/adv7604.c |   83 +++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 81 insertions(+), 2 deletions(-)

diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c
index be3f866..a2abb04 100644
--- a/drivers/media/i2c/adv7604.c
+++ b/drivers/media/i2c/adv7604.c
@@ -80,6 +80,7 @@ MODULE_LICENSE("GPL");
 enum adv76xx_type {
 	ADV7604,
 	ADV7611,
+	ADV7612,
 };
 
 struct adv76xx_reg_seq {
@@ -753,6 +754,23 @@ static const struct adv76xx_format_info adv7611_formats[] = {
 	  ADV76XX_OP_MODE_SEL_SDR_422_2X | ADV76XX_OP_FORMAT_SEL_12BIT },
 };
 
+static const struct adv76xx_format_info adv7612_formats[] = {
+	{ MEDIA_BUS_FMT_RGB888_1X24, ADV76XX_OP_CH_SEL_RGB, true, false,
+	  ADV76XX_OP_MODE_SEL_SDR_444 | ADV76XX_OP_FORMAT_SEL_8BIT },
+	{ MEDIA_BUS_FMT_YUYV8_2X8, ADV76XX_OP_CH_SEL_RGB, false, false,
+	  ADV76XX_OP_MODE_SEL_SDR_422 | ADV76XX_OP_FORMAT_SEL_8BIT },
+	{ MEDIA_BUS_FMT_YVYU8_2X8, ADV76XX_OP_CH_SEL_RGB, false, true,
+	  ADV76XX_OP_MODE_SEL_SDR_422 | ADV76XX_OP_FORMAT_SEL_8BIT },
+	{ MEDIA_BUS_FMT_UYVY8_1X16, ADV76XX_OP_CH_SEL_RBG, false, false,
+	  ADV76XX_OP_MODE_SEL_SDR_422_2X | ADV76XX_OP_FORMAT_SEL_8BIT },
+	{ MEDIA_BUS_FMT_VYUY8_1X16, ADV76XX_OP_CH_SEL_RBG, false, true,
+	  ADV76XX_OP_MODE_SEL_SDR_422_2X | ADV76XX_OP_FORMAT_SEL_8BIT },
+	{ MEDIA_BUS_FMT_YUYV8_1X16, ADV76XX_OP_CH_SEL_RGB, false, false,
+	  ADV76XX_OP_MODE_SEL_SDR_422_2X | ADV76XX_OP_FORMAT_SEL_8BIT },
+	{ MEDIA_BUS_FMT_YVYU8_1X16, ADV76XX_OP_CH_SEL_RGB, false, true,
+	  ADV76XX_OP_MODE_SEL_SDR_422_2X | ADV76XX_OP_FORMAT_SEL_8BIT },
+};
+
 static const struct adv76xx_format_info *
 adv76xx_format_info(struct adv76xx_state *state, u32 code)
 {
@@ -2465,6 +2483,11 @@ static void adv7611_setup_irqs(struct v4l2_subdev *sd)
 	io_write(sd, 0x41, 0xd0); /* STDI irq for any change, disable INT2 */
 }
 
+static void adv7612_setup_irqs(struct v4l2_subdev *sd)
+{
+	io_write(sd, 0x41, 0xd0); /* disable INT2 */
+}
+
 static void adv76xx_unregister_clients(struct adv76xx_state *state)
 {
 	unsigned int i;
@@ -2552,6 +2575,19 @@ static const struct adv76xx_reg_seq adv7611_recommended_settings_hdmi[] = {
 	{ ADV76XX_REG_SEQ_TERM, 0 },
 };
 
+static const struct adv76xx_reg_seq adv7612_recommended_settings_hdmi[] = {
+	{ ADV76XX_REG(ADV76XX_PAGE_CP, 0x6c), 0x00 },
+	{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x9b), 0x03 },
+	{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x6f), 0x08 },
+	{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x85), 0x1f },
+	{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x87), 0x70 },
+	{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x57), 0xda },
+	{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x58), 0x01 },
+	{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x03), 0x98 },
+	{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x4c), 0x44 },
+	{ ADV76XX_REG_SEQ_TERM, 0 },
+};
+
 static const struct adv76xx_chip_info adv76xx_chip_info[] = {
 	[ADV7604] = {
 		.type = ADV7604,
@@ -2640,17 +2676,59 @@ static const struct adv76xx_chip_info adv76xx_chip_info[] = {
 		.field1_vsync_mask = 0x3fff,
 		.field1_vbackporch_mask = 0x3fff,
 	},
+	[ADV7612] = {
+		.type = ADV7612,
+		.has_afe = false,
+		.max_port = ADV7604_PAD_HDMI_PORT_B,
+		.num_dv_ports = 2,
+		.edid_enable_reg = 0x74,
+		.edid_status_reg = 0x76,
+		.lcf_reg = 0xa3,
+		.tdms_lock_mask = 0x43,
+		.cable_det_mask = 0x01,
+		.fmt_change_digital_mask = 0x03,
+		.formats = adv7612_formats,
+		.nformats = ARRAY_SIZE(adv7612_formats),
+		.set_termination = adv7611_set_termination,
+		.setup_irqs = adv7612_setup_irqs,
+		.read_hdmi_pixelclock = adv7611_read_hdmi_pixelclock,
+		.read_cable_det = adv7611_read_cable_det,
+		.recommended_settings = {
+		    [1] = adv7612_recommended_settings_hdmi,
+		},
+		.num_recommended_settings = {
+		    [1] = ARRAY_SIZE(adv7612_recommended_settings_hdmi),
+		},
+		.page_mask = BIT(ADV76XX_PAGE_IO) | BIT(ADV76XX_PAGE_CEC) |
+			BIT(ADV76XX_PAGE_INFOFRAME) | BIT(ADV76XX_PAGE_AFE) |
+			BIT(ADV76XX_PAGE_REP) |  BIT(ADV76XX_PAGE_EDID) |
+			BIT(ADV76XX_PAGE_HDMI) | BIT(ADV76XX_PAGE_CP),
+		.linewidth_mask = 0x1fff,
+		.field0_height_mask = 0x1fff,
+		.field1_height_mask = 0x1fff,
+		.hfrontporch_mask = 0x1fff,
+		.hsync_mask = 0x1fff,
+		.hbackporch_mask = 0x1fff,
+		.field0_vfrontporch_mask = 0x3fff,
+		.field0_vsync_mask = 0x3fff,
+		.field0_vbackporch_mask = 0x3fff,
+		.field1_vfrontporch_mask = 0x3fff,
+		.field1_vsync_mask = 0x3fff,
+		.field1_vbackporch_mask = 0x3fff,
+	},
 };
 
 static const struct i2c_device_id adv76xx_i2c_id[] = {
 	{ "adv7604", (kernel_ulong_t)&adv76xx_chip_info[ADV7604] },
 	{ "adv7611", (kernel_ulong_t)&adv76xx_chip_info[ADV7611] },
+	{ "adv7612", (kernel_ulong_t)&adv76xx_chip_info[ADV7612] },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, adv76xx_i2c_id);
 
 static const struct of_device_id adv76xx_of_id[] __maybe_unused = {
 	{ .compatible = "adi,adv7611", .data = &adv76xx_chip_info[ADV7611] },
+	{ .compatible = "adi,adv7612", .data = &adv76xx_chip_info[ADV7612] },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, adv76xx_of_id);
@@ -2805,8 +2883,9 @@ static int adv76xx_probe(struct i2c_client *client,
 	} else {
 		val = (adv_smbus_read_byte_data_check(client, 0xea, false) << 8)
 		    | (adv_smbus_read_byte_data_check(client, 0xeb, false) << 0);
-		if (val != 0x2051) {
-			v4l2_info(sd, "not an adv7611 on address 0x%x\n",
+		if ((state->info->type == ADV7611 && val != 0x2051) ||
+			(state->info->type == ADV7612 && val != 0x2041)) {
+			v4l2_info(sd, "not an adv761x on address 0x%x\n",
 					client->addr << 1);
 			return -ENODEV;
 		}
-- 
1.7.10.4


  parent reply	other threads:[~2015-05-21  9:03 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-20 16:39 HDMI and Composite capture on Lager, for kernel 4.1 William Towle
2015-05-20 16:39 ` [PATCH 01/20] ARM: shmobile: lager dts: Add entries for VIN HDMI input support William Towle
2015-05-20 16:39 ` [PATCH 02/20] media: adv7180: add of match table William Towle
2015-05-20 16:39 ` William Towle [this message]
2015-05-25 13:38   ` [PATCH 03/20] media: adv7604: chip info and formats for ADV7612 Guennadi Liakhovetski
2015-05-20 16:39 ` [PATCH 04/20] media: adv7604: document support for ADV7612 dual HDMI input decoder William Towle
2015-05-20 16:39 ` [PATCH 05/20] media: adv7604: ability to read default input port from DT William Towle
2015-05-20 16:39 ` [PATCH 06/20] ARM: shmobile: lager dts: specify default-input for ADV7612 William Towle
2015-05-20 16:39 ` [PATCH 07/20] media: soc_camera: rcar_vin: Add BT.709 24-bit RGB888 input support William Towle
2015-05-25 14:18   ` Guennadi Liakhovetski
2015-05-26 11:17     ` William Towle
2015-05-20 16:39 ` [PATCH 08/20] media: soc_camera pad-aware driver initialisation William Towle
2015-05-20 20:22   ` Sergei Shtylyov
2015-05-21  5:55   ` Hans Verkuil
2015-05-23 18:32     ` Laurent Pinchart
2015-05-24  8:08       ` Hans Verkuil
2015-05-24 21:50         ` Laurent Pinchart
2015-05-24 22:43           ` Hans Verkuil
2015-05-25 11:37             ` Laurent Pinchart
2015-05-20 16:39 ` [PATCH 09/20] media: rcar_vin: Use correct pad number in try_fmt William Towle
2015-05-21  5:58   ` Hans Verkuil
2015-05-23 18:24     ` Laurent Pinchart
2015-05-20 16:39 ` [PATCH 10/20] media: soc_camera: soc_scale_crop: Use correct pad when calling subdev try_fmt William Towle
2015-05-20 16:39 ` [PATCH 11/20] media: soc_camera: Fill std field in enum_input William Towle
2015-05-20 16:39 ` [PATCH 12/20] media: soc_camera: Fix error reporting in expbuf William Towle
2015-05-20 16:39 ` [PATCH 13/20] media: soc_camera: v4l2-compliance fixes for querycap William Towle
2015-05-21  5:58   ` Hans Verkuil
2015-05-21 12:46     ` Rob Taylor
2015-05-29  1:08       ` [Linux-kernel] " Ben Hutchings
2015-05-29 10:10         ` Hans Verkuil
2015-05-29 11:13           ` Rob Taylor
2015-05-25 15:02   ` Guennadi Liakhovetski
2015-05-20 16:39 ` [PATCH 14/20] media: rcar_vin: Reject videobufs that are too small for current format William Towle
2015-05-25 15:03   ` Guennadi Liakhovetski
2015-05-20 16:39 ` [PATCH 15/20] media: rcar_vin: Don't advertise support for USERPTR William Towle
2015-05-21  6:03   ` Hans Verkuil
2015-05-21 12:50     ` Rob Taylor
2015-05-20 16:39 ` [PATCH 16/20] media: adv7180: Fix set_pad_format() passing wrong format William Towle
2015-05-25 15:12   ` Guennadi Liakhovetski
2015-05-20 16:39 ` [PATCH 17/20] media: adv7604: Support V4L_FIELD_INTERLACED William Towle
2015-05-21  6:10   ` Hans Verkuil
2015-05-21 10:40     ` Rob Taylor
2015-05-25 15:15   ` Guennadi Liakhovetski
2015-05-20 16:39 ` [PATCH 18/20] media: adv7604: Always query_dv_timings in adv76xx_fill_format William Towle
2015-05-21  6:13   ` Hans Verkuil
2015-05-20 16:39 ` [PATCH 19/20] media: rcar_vin: Clean up format debugging statements William Towle
2015-05-25 17:20   ` Guennadi Liakhovetski
2015-05-20 16:39 ` [PATCH 20/20] media: soc_camera: Add debugging for get_formats William Towle
2015-05-25 15:32   ` Guennadi Liakhovetski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1432139980-12619-4-git-send-email-william.towle@codethink.co.uk \
    --to=william.towle@codethink.co.uk \
    --cc=g.liakhovetski@gmx.de \
    --cc=hverkuil@xs4all.nl \
    --cc=linux-kernel@lists.codethink.co.uk \
    --cc=linux-media@vger.kernel.org \
    --cc=rob.taylor@codethink.co.uk \
    --cc=sergei.shtylyov@cogentembedded.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.