From: Stefan Agner <stefan@agner.ch> To: ulf.hansson@linaro.org Cc: gregory.clement@free-electrons.com, zhangfei.gao@marvell.com, jszhang@marvell.com, chris@printf.net, anton@enomsg.org, b29396@freescale.com, shawn.guo@linaro.org, linux-mmc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, stefan@agner.ch Subject: [PATCH v3 1/2] mmc: sdhci: fix abort due to missing runtime PM Date: Thu, 21 May 2015 09:15:03 +0200 [thread overview] Message-ID: <1432192504-3601-1-git-send-email-stefan@agner.ch> (raw) When using i.MX ESDHC driver, while entering suspend while the device is in runtime PM, the sdhci_(suspend|resume)_host function are called with disabled clocks. Since this functions access the SDHC host registers, this leads to an external abort on Vybrid SoC: [ 37.772967] Unhandled fault: imprecise external abort (0x1c06) at 0x76f5f000 [ 37.780304] Internal error: : 1c06 [#1] ARM [ 37.784670] Modules linked in: [ 37.787908] CPU: 0 PID: 428 Comm: sh Not tainted 3.18.0-rc5-00119-geefd097-dirty #1540 [ 37.796142] task: 8e246c00 ti: 8ca6c000 task.ti: 8ca6c000 [ 37.801785] PC is at esdhc_writel_le+0x40/0xec [ 37.806431] LR is at sdhci_set_card_detection+0xe0/0xe4 [ 37.811877] pc : [<803f0584>] lr : [<803eaaa0>] psr: 400f0013 [ 37.811877] sp : 8ca6dd28 ip : 00000001 fp : 8ca6dd3c [ 37.823766] r10: 807a233c r9 : 00000000 r8 : 8e8b7210 [ 37.829194] r7 : 802d8a08 r6 : 8082e928 r5 : 00000000 r4 : 00000002 [ 37.835974] r3 : 8ea34e90 r2 : 00000038 r1 : 00000000 r0 : 8ea32ac0 ... Clocks need to be enabled to access the registers. Fix the issue by add runtime PM enabled pltfm implementation of suspend/resume which take care of clocks by using the runtime PM API properly. Signed-off-by: Stefan Agner <stefan@agner.ch> --- Changes since v2: - Implement a generic pltfm suspend/resume function instead of a local function in sdhci-esdhc-imx.c - Convert sdhci-pxav3 to use the runtime PM enabled pltfm suspend/resume function too drivers/mmc/host/sdhci-esdhc-imx.c | 2 +- drivers/mmc/host/sdhci-pltfm.c | 36 ++++++++++++++++++++++++++++++++++++ drivers/mmc/host/sdhci-pltfm.h | 2 ++ 3 files changed, 39 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 82f512d..7b7b3a3 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -1132,7 +1132,7 @@ static int sdhci_esdhc_runtime_resume(struct device *dev) #endif static const struct dev_pm_ops sdhci_esdhc_pmops = { - SET_SYSTEM_SLEEP_PM_OPS(sdhci_pltfm_suspend, sdhci_pltfm_resume) + SET_SYSTEM_SLEEP_PM_OPS(sdhci_pltfm_rpm_suspend, sdhci_pltfm_rpm_resume) SET_RUNTIME_PM_OPS(sdhci_esdhc_runtime_suspend, sdhci_esdhc_runtime_resume, NULL) }; diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c index a207f5a..38c03cd 100644 --- a/drivers/mmc/host/sdhci-pltfm.c +++ b/drivers/mmc/host/sdhci-pltfm.c @@ -31,6 +31,7 @@ #include <linux/err.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/pm_runtime.h> #ifdef CONFIG_PPC #include <asm/machdep.h> #endif @@ -256,6 +257,41 @@ const struct dev_pm_ops sdhci_pltfm_pmops = { .resume = sdhci_pltfm_resume, }; EXPORT_SYMBOL_GPL(sdhci_pltfm_pmops); + +int sdhci_pltfm_rpm_suspend(struct device *dev) +{ + int ret; + struct sdhci_host *host = dev_get_drvdata(dev); + + pm_runtime_get_sync(dev); + ret = sdhci_suspend_host(host); + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + if (ret) + return ret; + + return pm_runtime_force_suspend(dev); +} +EXPORT_SYMBOL_GPL(sdhci_pltfm_rpm_suspend); + +int sdhci_pltfm_rpm_resume(struct device *dev) +{ + int ret; + struct sdhci_host *host = dev_get_drvdata(dev); + + ret = pm_runtime_force_resume(dev); + + if (ret) + return ret; + + pm_runtime_get_sync(dev); + ret = sdhci_resume_host(host); + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + + return ret; +} +EXPORT_SYMBOL_GPL(sdhci_pltfm_rpm_resume); #endif /* CONFIG_PM */ static int __init sdhci_pltfm_drv_init(void) diff --git a/drivers/mmc/host/sdhci-pltfm.h b/drivers/mmc/host/sdhci-pltfm.h index 04bc248..ac5f6ea 100644 --- a/drivers/mmc/host/sdhci-pltfm.h +++ b/drivers/mmc/host/sdhci-pltfm.h @@ -114,6 +114,8 @@ static inline void *sdhci_pltfm_priv(struct sdhci_pltfm_host *host) extern int sdhci_pltfm_suspend(struct device *dev); extern int sdhci_pltfm_resume(struct device *dev); extern const struct dev_pm_ops sdhci_pltfm_pmops; +extern int sdhci_pltfm_rpm_suspend(struct device *dev); +extern int sdhci_pltfm_rpm_resume(struct device *dev); #define SDHCI_PLTFM_PMOPS (&sdhci_pltfm_pmops) #else #define SDHCI_PLTFM_PMOPS NULL -- 2.4.1
WARNING: multiple messages have this Message-ID (diff)
From: stefan@agner.ch (Stefan Agner) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 1/2] mmc: sdhci: fix abort due to missing runtime PM Date: Thu, 21 May 2015 09:15:03 +0200 [thread overview] Message-ID: <1432192504-3601-1-git-send-email-stefan@agner.ch> (raw) When using i.MX ESDHC driver, while entering suspend while the device is in runtime PM, the sdhci_(suspend|resume)_host function are called with disabled clocks. Since this functions access the SDHC host registers, this leads to an external abort on Vybrid SoC: [ 37.772967] Unhandled fault: imprecise external abort (0x1c06) at 0x76f5f000 [ 37.780304] Internal error: : 1c06 [#1] ARM [ 37.784670] Modules linked in: [ 37.787908] CPU: 0 PID: 428 Comm: sh Not tainted 3.18.0-rc5-00119-geefd097-dirty #1540 [ 37.796142] task: 8e246c00 ti: 8ca6c000 task.ti: 8ca6c000 [ 37.801785] PC is at esdhc_writel_le+0x40/0xec [ 37.806431] LR is at sdhci_set_card_detection+0xe0/0xe4 [ 37.811877] pc : [<803f0584>] lr : [<803eaaa0>] psr: 400f0013 [ 37.811877] sp : 8ca6dd28 ip : 00000001 fp : 8ca6dd3c [ 37.823766] r10: 807a233c r9 : 00000000 r8 : 8e8b7210 [ 37.829194] r7 : 802d8a08 r6 : 8082e928 r5 : 00000000 r4 : 00000002 [ 37.835974] r3 : 8ea34e90 r2 : 00000038 r1 : 00000000 r0 : 8ea32ac0 ... Clocks need to be enabled to access the registers. Fix the issue by add runtime PM enabled pltfm implementation of suspend/resume which take care of clocks by using the runtime PM API properly. Signed-off-by: Stefan Agner <stefan@agner.ch> --- Changes since v2: - Implement a generic pltfm suspend/resume function instead of a local function in sdhci-esdhc-imx.c - Convert sdhci-pxav3 to use the runtime PM enabled pltfm suspend/resume function too drivers/mmc/host/sdhci-esdhc-imx.c | 2 +- drivers/mmc/host/sdhci-pltfm.c | 36 ++++++++++++++++++++++++++++++++++++ drivers/mmc/host/sdhci-pltfm.h | 2 ++ 3 files changed, 39 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 82f512d..7b7b3a3 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -1132,7 +1132,7 @@ static int sdhci_esdhc_runtime_resume(struct device *dev) #endif static const struct dev_pm_ops sdhci_esdhc_pmops = { - SET_SYSTEM_SLEEP_PM_OPS(sdhci_pltfm_suspend, sdhci_pltfm_resume) + SET_SYSTEM_SLEEP_PM_OPS(sdhci_pltfm_rpm_suspend, sdhci_pltfm_rpm_resume) SET_RUNTIME_PM_OPS(sdhci_esdhc_runtime_suspend, sdhci_esdhc_runtime_resume, NULL) }; diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c index a207f5a..38c03cd 100644 --- a/drivers/mmc/host/sdhci-pltfm.c +++ b/drivers/mmc/host/sdhci-pltfm.c @@ -31,6 +31,7 @@ #include <linux/err.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/pm_runtime.h> #ifdef CONFIG_PPC #include <asm/machdep.h> #endif @@ -256,6 +257,41 @@ const struct dev_pm_ops sdhci_pltfm_pmops = { .resume = sdhci_pltfm_resume, }; EXPORT_SYMBOL_GPL(sdhci_pltfm_pmops); + +int sdhci_pltfm_rpm_suspend(struct device *dev) +{ + int ret; + struct sdhci_host *host = dev_get_drvdata(dev); + + pm_runtime_get_sync(dev); + ret = sdhci_suspend_host(host); + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + if (ret) + return ret; + + return pm_runtime_force_suspend(dev); +} +EXPORT_SYMBOL_GPL(sdhci_pltfm_rpm_suspend); + +int sdhci_pltfm_rpm_resume(struct device *dev) +{ + int ret; + struct sdhci_host *host = dev_get_drvdata(dev); + + ret = pm_runtime_force_resume(dev); + + if (ret) + return ret; + + pm_runtime_get_sync(dev); + ret = sdhci_resume_host(host); + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + + return ret; +} +EXPORT_SYMBOL_GPL(sdhci_pltfm_rpm_resume); #endif /* CONFIG_PM */ static int __init sdhci_pltfm_drv_init(void) diff --git a/drivers/mmc/host/sdhci-pltfm.h b/drivers/mmc/host/sdhci-pltfm.h index 04bc248..ac5f6ea 100644 --- a/drivers/mmc/host/sdhci-pltfm.h +++ b/drivers/mmc/host/sdhci-pltfm.h @@ -114,6 +114,8 @@ static inline void *sdhci_pltfm_priv(struct sdhci_pltfm_host *host) extern int sdhci_pltfm_suspend(struct device *dev); extern int sdhci_pltfm_resume(struct device *dev); extern const struct dev_pm_ops sdhci_pltfm_pmops; +extern int sdhci_pltfm_rpm_suspend(struct device *dev); +extern int sdhci_pltfm_rpm_resume(struct device *dev); #define SDHCI_PLTFM_PMOPS (&sdhci_pltfm_pmops) #else #define SDHCI_PLTFM_PMOPS NULL -- 2.4.1
next reply other threads:[~2015-05-21 7:15 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-05-21 7:15 Stefan Agner [this message] 2015-05-21 7:15 ` [PATCH v3 1/2] mmc: sdhci: fix abort due to missing runtime PM Stefan Agner 2015-05-21 7:15 ` [PATCH v3 2/2] mmc: sdhci-pxav3: use runtime_pm enabled pltfm suspend/resume Stefan Agner 2015-05-21 7:15 ` Stefan Agner 2015-05-27 10:05 ` [PATCH v3 1/2] mmc: sdhci: fix abort due to missing runtime PM Dong Aisheng 2015-05-27 10:05 ` Dong Aisheng 2015-05-27 10:05 ` Dong Aisheng 2015-05-27 10:40 ` Stefan Agner 2015-05-27 10:40 ` Stefan Agner 2015-07-30 11:37 ` Stefan Agner 2015-07-30 11:37 ` Stefan Agner 2015-08-25 12:04 ` Ulf Hansson 2015-08-25 12:04 ` Ulf Hansson 2015-08-25 12:04 ` Ulf Hansson
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1432192504-3601-1-git-send-email-stefan@agner.ch \ --to=stefan@agner.ch \ --cc=anton@enomsg.org \ --cc=b29396@freescale.com \ --cc=chris@printf.net \ --cc=gregory.clement@free-electrons.com \ --cc=jszhang@marvell.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mmc@vger.kernel.org \ --cc=shawn.guo@linaro.org \ --cc=ulf.hansson@linaro.org \ --cc=zhangfei.gao@marvell.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.