All of lore.kernel.org
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
To: Chanwoo Choi <cw00.choi@samsung.com>,
	MyungJoo Ham <myungjoo.ham@samsung.com>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Samuel Ortiz <sameo@linux.intel.com>,
	Lee Jones <lee.jones@linaro.org>,
	Sebastian Reichel <sre@kernel.org>,
	Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>,
	David Woodhouse <dwmw2@infradead.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	linux-kernel@vger.kernel.org, linux-input@vger.kernel.org,
	linux-pm@vger.kernel.org
Cc: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Subject: [PATCH v2 6/9] mfd/extcon: max77693: Rename defines to allow inclusion with max77843
Date: Sun, 24 May 2015 14:43:30 +0900	[thread overview]
Message-ID: <1432446213-4886-7-git-send-email-k.kozlowski.k@gmail.com> (raw)
In-Reply-To: <1432446213-4886-1-git-send-email-k.kozlowski.k@gmail.com>

Add MAX77693 prefix to some of the defines used in max77693 extcon
driver so the max77693-private.h can be included simultaneously with
max77843-private.h.

Additionally use BIT() macro in header.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
---
 drivers/extcon/extcon-max77693.c     |  72 +++++++++++++------------
 include/linux/mfd/max77693-private.h | 102 +++++++++++++++++------------------
 2 files changed, 89 insertions(+), 85 deletions(-)

diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
index 4ef45f257e6e..96f1545be4ab 100644
--- a/drivers/extcon/extcon-max77693.c
+++ b/drivers/extcon/extcon-max77693.c
@@ -43,7 +43,7 @@ static struct max77693_reg_data default_init_data[] = {
 	{
 		/* STATUS2 - [3]ChgDetRun */
 		.addr = MAX77693_MUIC_REG_STATUS2,
-		.data = STATUS2_CHGDETRUN_MASK,
+		.data = MAX77693_STATUS2_CHGDETRUN_MASK,
 	}, {
 		/* INTMASK1 - Unmask [3]ADC1KM,[0]ADCM */
 		.addr = MAX77693_MUIC_REG_INTMASK1,
@@ -236,7 +236,7 @@ static int max77693_muic_set_debounce_time(struct max77693_muic_info *info,
 		 */
 		ret = regmap_write(info->max77693->regmap_muic,
 				  MAX77693_MUIC_REG_CTRL3,
-				  time << CONTROL3_ADCDBSET_SHIFT);
+				  time << MAX77693_CONTROL3_ADCDBSET_SHIFT);
 		if (ret) {
 			dev_err(info->dev, "failed to set ADC debounce time\n");
 			return ret;
@@ -269,7 +269,7 @@ static int max77693_muic_set_path(struct max77693_muic_info *info,
 	if (attached)
 		ctrl1 = val;
 	else
-		ctrl1 = CONTROL1_SW_OPEN;
+		ctrl1 = MAX77693_CONTROL1_SW_OPEN;
 
 	ret = regmap_update_bits(info->max77693->regmap_muic,
 			MAX77693_MUIC_REG_CTRL1, COMP_SW_MASK, ctrl1);
@@ -279,13 +279,14 @@ static int max77693_muic_set_path(struct max77693_muic_info *info,
 	}
 
 	if (attached)
-		ctrl2 |= CONTROL2_CPEN_MASK;	/* LowPwr=0, CPEn=1 */
+		ctrl2 |= MAX77693_CONTROL2_CPEN_MASK;	/* LowPwr=0, CPEn=1 */
 	else
-		ctrl2 |= CONTROL2_LOWPWR_MASK;	/* LowPwr=1, CPEn=0 */
+		ctrl2 |= MAX77693_CONTROL2_LOWPWR_MASK;	/* LowPwr=1, CPEn=0 */
 
 	ret = regmap_update_bits(info->max77693->regmap_muic,
 			MAX77693_MUIC_REG_CTRL2,
-			CONTROL2_LOWPWR_MASK | CONTROL2_CPEN_MASK, ctrl2);
+			MAX77693_CONTROL2_LOWPWR_MASK | MAX77693_CONTROL2_CPEN_MASK,
+			ctrl2);
 	if (ret < 0) {
 		dev_err(info->dev, "failed to update MUIC register\n");
 		return ret;
@@ -327,8 +328,8 @@ static int max77693_muic_get_cable_type(struct max77693_muic_info *info,
 		 * Read ADC value to check cable type and decide cable state
 		 * according to cable type
 		 */
-		adc = info->status[0] & STATUS1_ADC_MASK;
-		adc >>= STATUS1_ADC_SHIFT;
+		adc = info->status[0] & MAX77693_STATUS1_ADC_MASK;
+		adc >>= MAX77693_STATUS1_ADC_SHIFT;
 
 		/*
 		 * Check current cable state/cable type and store cable type
@@ -351,8 +352,8 @@ static int max77693_muic_get_cable_type(struct max77693_muic_info *info,
 		 * Read ADC value to check cable type and decide cable state
 		 * according to cable type
 		 */
-		adc = info->status[0] & STATUS1_ADC_MASK;
-		adc >>= STATUS1_ADC_SHIFT;
+		adc = info->status[0] & MAX77693_STATUS1_ADC_MASK;
+		adc >>= MAX77693_STATUS1_ADC_SHIFT;
 
 		/*
 		 * Check current cable state/cable type and store cable type
@@ -367,13 +368,13 @@ static int max77693_muic_get_cable_type(struct max77693_muic_info *info,
 		} else {
 			*attached = true;
 
-			adclow = info->status[0] & STATUS1_ADCLOW_MASK;
-			adclow >>= STATUS1_ADCLOW_SHIFT;
-			adc1k = info->status[0] & STATUS1_ADC1K_MASK;
-			adc1k >>= STATUS1_ADC1K_SHIFT;
+			adclow = info->status[0] & MAX77693_STATUS1_ADCLOW_MASK;
+			adclow >>= MAX77693_STATUS1_ADCLOW_SHIFT;
+			adc1k = info->status[0] & MAX77693_STATUS1_ADC1K_MASK;
+			adc1k >>= MAX77693_STATUS1_ADC1K_SHIFT;
 
-			vbvolt = info->status[1] & STATUS2_VBVOLT_MASK;
-			vbvolt >>= STATUS2_VBVOLT_SHIFT;
+			vbvolt = info->status[1] & MAX77693_STATUS2_VBVOLT_MASK;
+			vbvolt >>= MAX77693_STATUS2_VBVOLT_SHIFT;
 
 			/**
 			 * [0x1|VBVolt|ADCLow|ADC1K]
@@ -398,8 +399,8 @@ static int max77693_muic_get_cable_type(struct max77693_muic_info *info,
 		 * Read charger type to check cable type and decide cable state
 		 * according to type of charger cable.
 		 */
-		chg_type = info->status[1] & STATUS2_CHGTYP_MASK;
-		chg_type >>= STATUS2_CHGTYP_SHIFT;
+		chg_type = info->status[1] & MAX77693_STATUS2_CHGTYP_MASK;
+		chg_type >>= MAX77693_STATUS2_CHGTYP_SHIFT;
 
 		if (chg_type == MAX77693_CHARGER_TYPE_NONE) {
 			*attached = false;
@@ -423,10 +424,10 @@ static int max77693_muic_get_cable_type(struct max77693_muic_info *info,
 		 * Read ADC value to check cable type and decide cable state
 		 * according to cable type
 		 */
-		adc = info->status[0] & STATUS1_ADC_MASK;
-		adc >>= STATUS1_ADC_SHIFT;
-		chg_type = info->status[1] & STATUS2_CHGTYP_MASK;
-		chg_type >>= STATUS2_CHGTYP_SHIFT;
+		adc = info->status[0] & MAX77693_STATUS1_ADC_MASK;
+		adc >>= MAX77693_STATUS1_ADC_SHIFT;
+		chg_type = info->status[1] & MAX77693_STATUS2_CHGTYP_MASK;
+		chg_type >>= MAX77693_STATUS2_CHGTYP_SHIFT;
 
 		if (adc == MAX77693_MUIC_ADC_OPEN
 				&& chg_type == MAX77693_CHARGER_TYPE_NONE)
@@ -438,8 +439,8 @@ static int max77693_muic_get_cable_type(struct max77693_muic_info *info,
 		 * Read vbvolt field, if vbvolt is 1,
 		 * this cable is used for charging.
 		 */
-		vbvolt = info->status[1] & STATUS2_VBVOLT_MASK;
-		vbvolt >>= STATUS2_VBVOLT_SHIFT;
+		vbvolt = info->status[1] & MAX77693_STATUS2_VBVOLT_MASK;
+		vbvolt >>= MAX77693_STATUS2_VBVOLT_SHIFT;
 
 		cable_type = vbvolt;
 		break;
@@ -521,7 +522,8 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info,
 	}
 
 	/* Dock-Car/Desk/Audio, PATH:AUDIO */
-	ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO, attached);
+	ret = max77693_muic_set_path(info, MAX77693_CONTROL1_SW_AUDIO,
+					attached);
 	if (ret < 0)
 		return ret;
 	extcon_set_cable_state_(info->edev, dock_id, attached);
@@ -586,14 +588,16 @@ static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info)
 	case MAX77693_MUIC_GND_USB_HOST:
 	case MAX77693_MUIC_GND_USB_HOST_VB:
 		/* USB_HOST, PATH: AP_USB */
-		ret = max77693_muic_set_path(info, CONTROL1_SW_USB, attached);
+		ret = max77693_muic_set_path(info, MAX77693_CONTROL1_SW_USB,
+						attached);
 		if (ret < 0)
 			return ret;
 		extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached);
 		break;
 	case MAX77693_MUIC_GND_AV_CABLE_LOAD:
 		/* Audio Video Cable with load, PATH:AUDIO */
-		ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO, attached);
+		ret = max77693_muic_set_path(info, MAX77693_CONTROL1_SW_AUDIO,
+						attached);
 		if (ret < 0)
 			return ret;
 		extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
@@ -616,7 +620,7 @@ static int max77693_muic_jig_handler(struct max77693_muic_info *info,
 		int cable_type, bool attached)
 {
 	int ret = 0;
-	u8 path = CONTROL1_SW_OPEN;
+	u8 path = MAX77693_CONTROL1_SW_OPEN;
 
 	dev_info(info->dev,
 		"external connector is %s (adc:0x%02x)\n",
@@ -626,12 +630,12 @@ static int max77693_muic_jig_handler(struct max77693_muic_info *info,
 	case MAX77693_MUIC_ADC_FACTORY_MODE_USB_OFF:	/* ADC_JIG_USB_OFF */
 	case MAX77693_MUIC_ADC_FACTORY_MODE_USB_ON:	/* ADC_JIG_USB_ON */
 		/* PATH:AP_USB */
-		path = CONTROL1_SW_USB;
+		path = MAX77693_CONTROL1_SW_USB;
 		break;
 	case MAX77693_MUIC_ADC_FACTORY_MODE_UART_OFF:	/* ADC_JIG_UART_OFF */
 	case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON:	/* ADC_JIG_UART_ON */
 		/* PATH:AP_UART */
-		path = CONTROL1_SW_UART;
+		path = MAX77693_CONTROL1_SW_UART;
 		break;
 	default:
 		dev_err(info->dev, "failed to detect %s jig cable\n",
@@ -1181,12 +1185,12 @@ static int max77693_muic_probe(struct platform_device *pdev)
 		if (muic_pdata->path_uart)
 			info->path_uart = muic_pdata->path_uart;
 		else
-			info->path_uart = CONTROL1_SW_UART;
+			info->path_uart = MAX77693_CONTROL1_SW_UART;
 
 		if (muic_pdata->path_usb)
 			info->path_usb = muic_pdata->path_usb;
 		else
-			info->path_usb = CONTROL1_SW_USB;
+			info->path_usb = MAX77693_CONTROL1_SW_USB;
 
 		/*
 		 * Default delay time for detecting cable state
@@ -1198,8 +1202,8 @@ static int max77693_muic_probe(struct platform_device *pdev)
 		else
 			delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
 	} else {
-		info->path_usb = CONTROL1_SW_USB;
-		info->path_uart = CONTROL1_SW_UART;
+		info->path_usb = MAX77693_CONTROL1_SW_USB;
+		info->path_uart = MAX77693_CONTROL1_SW_UART;
 		delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
 	}
 
diff --git a/include/linux/mfd/max77693-private.h b/include/linux/mfd/max77693-private.h
index 8c4143c0c651..3c7a63b98ad6 100644
--- a/include/linux/mfd/max77693-private.h
+++ b/include/linux/mfd/max77693-private.h
@@ -310,30 +310,30 @@ enum max77693_muic_reg {
 #define INTMASK2_CHGTYP_MASK		(1 << INTMASK2_CHGTYP_SHIFT)
 
 /* MAX77693 MUIC - STATUS1~3 Register */
-#define STATUS1_ADC_SHIFT		(0)
-#define STATUS1_ADCLOW_SHIFT		(5)
-#define STATUS1_ADCERR_SHIFT		(6)
-#define STATUS1_ADC1K_SHIFT		(7)
-#define STATUS1_ADC_MASK		(0x1f << STATUS1_ADC_SHIFT)
-#define STATUS1_ADCLOW_MASK		(0x1 << STATUS1_ADCLOW_SHIFT)
-#define STATUS1_ADCERR_MASK		(0x1 << STATUS1_ADCERR_SHIFT)
-#define STATUS1_ADC1K_MASK		(0x1 << STATUS1_ADC1K_SHIFT)
-
-#define STATUS2_CHGTYP_SHIFT		(0)
-#define STATUS2_CHGDETRUN_SHIFT		(3)
-#define STATUS2_DCDTMR_SHIFT		(4)
-#define STATUS2_DXOVP_SHIFT		(5)
-#define STATUS2_VBVOLT_SHIFT		(6)
-#define STATUS2_VIDRM_SHIFT		(7)
-#define STATUS2_CHGTYP_MASK		(0x7 << STATUS2_CHGTYP_SHIFT)
-#define STATUS2_CHGDETRUN_MASK		(0x1 << STATUS2_CHGDETRUN_SHIFT)
-#define STATUS2_DCDTMR_MASK		(0x1 << STATUS2_DCDTMR_SHIFT)
-#define STATUS2_DXOVP_MASK		(0x1 << STATUS2_DXOVP_SHIFT)
-#define STATUS2_VBVOLT_MASK		(0x1 << STATUS2_VBVOLT_SHIFT)
-#define STATUS2_VIDRM_MASK		(0x1 << STATUS2_VIDRM_SHIFT)
-
-#define STATUS3_OVP_SHIFT		(2)
-#define STATUS3_OVP_MASK		(0x1 << STATUS3_OVP_SHIFT)
+#define MAX77693_STATUS1_ADC_SHIFT		0
+#define MAX77693_STATUS1_ADCLOW_SHIFT		5
+#define MAX77693_STATUS1_ADCERR_SHIFT		6
+#define MAX77693_STATUS1_ADC1K_SHIFT		7
+#define MAX77693_STATUS1_ADC_MASK		(0x1f << MAX77693_STATUS1_ADC_SHIFT)
+#define MAX77693_STATUS1_ADCLOW_MASK		BIT(MAX77693_STATUS1_ADCLOW_SHIFT)
+#define MAX77693_STATUS1_ADCERR_MASK		BIT(MAX77693_STATUS1_ADCERR_SHIFT)
+#define MAX77693_STATUS1_ADC1K_MASK		BIT(MAX77693_STATUS1_ADC1K_SHIFT)
+
+#define MAX77693_STATUS2_CHGTYP_SHIFT		0
+#define MAX77693_STATUS2_CHGDETRUN_SHIFT	3
+#define MAX77693_STATUS2_DCDTMR_SHIFT		4
+#define MAX77693_STATUS2_DXOVP_SHIFT		5
+#define MAX77693_STATUS2_VBVOLT_SHIFT		6
+#define MAX77693_STATUS2_VIDRM_SHIFT		7
+#define MAX77693_STATUS2_CHGTYP_MASK		(0x7 << MAX77693_STATUS2_CHGTYP_SHIFT)
+#define MAX77693_STATUS2_CHGDETRUN_MASK		BIT(MAX77693_STATUS2_CHGDETRUN_SHIFT)
+#define MAX77693_STATUS2_DCDTMR_MASK		BIT(MAX77693_STATUS2_DCDTMR_SHIFT)
+#define MAX77693_STATUS2_DXOVP_MASK		BIT(MAX77693_STATUS2_DXOVP_SHIFT)
+#define MAX77693_STATUS2_VBVOLT_MASK		BIT(MAX77693_STATUS2_VBVOLT_SHIFT)
+#define MAX77693_STATUS2_VIDRM_MASK		BIT(MAX77693_STATUS2_VIDRM_SHIFT)
+
+#define MAX77693_STATUS3_OVP_SHIFT		2
+#define MAX77693_STATUS3_OVP_MASK		BIT(MAX77693_STATUS3_OVP_SHIFT)
 
 /* MAX77693 CDETCTRL1~2 register */
 #define CDETCTRL1_CHGDETEN_SHIFT	(0)
@@ -362,38 +362,38 @@ enum max77693_muic_reg {
 #define COMN1SW_MASK			(0x7 << COMN1SW_SHIFT)
 #define COMP2SW_MASK			(0x7 << COMP2SW_SHIFT)
 #define COMP_SW_MASK			(COMP2SW_MASK | COMN1SW_MASK)
-#define CONTROL1_SW_USB			((1 << COMP2SW_SHIFT) \
+#define MAX77693_CONTROL1_SW_USB	((1 << COMP2SW_SHIFT) \
 						| (1 << COMN1SW_SHIFT))
-#define CONTROL1_SW_AUDIO		((2 << COMP2SW_SHIFT) \
+#define MAX77693_CONTROL1_SW_AUDIO	((2 << COMP2SW_SHIFT) \
 						| (2 << COMN1SW_SHIFT))
-#define CONTROL1_SW_UART		((3 << COMP2SW_SHIFT) \
+#define MAX77693_CONTROL1_SW_UART	((3 << COMP2SW_SHIFT) \
 						| (3 << COMN1SW_SHIFT))
-#define CONTROL1_SW_OPEN		((0 << COMP2SW_SHIFT) \
+#define MAX77693_CONTROL1_SW_OPEN	((0 << COMP2SW_SHIFT) \
 						| (0 << COMN1SW_SHIFT))
 
-#define CONTROL2_LOWPWR_SHIFT		(0)
-#define CONTROL2_ADCEN_SHIFT		(1)
-#define CONTROL2_CPEN_SHIFT		(2)
-#define CONTROL2_SFOUTASRT_SHIFT	(3)
-#define CONTROL2_SFOUTORD_SHIFT		(4)
-#define CONTROL2_ACCDET_SHIFT		(5)
-#define CONTROL2_USBCPINT_SHIFT		(6)
-#define CONTROL2_RCPS_SHIFT		(7)
-#define CONTROL2_LOWPWR_MASK		(0x1 << CONTROL2_LOWPWR_SHIFT)
-#define CONTROL2_ADCEN_MASK		(0x1 << CONTROL2_ADCEN_SHIFT)
-#define CONTROL2_CPEN_MASK		(0x1 << CONTROL2_CPEN_SHIFT)
-#define CONTROL2_SFOUTASRT_MASK		(0x1 << CONTROL2_SFOUTASRT_SHIFT)
-#define CONTROL2_SFOUTORD_MASK		(0x1 << CONTROL2_SFOUTORD_SHIFT)
-#define CONTROL2_ACCDET_MASK		(0x1 << CONTROL2_ACCDET_SHIFT)
-#define CONTROL2_USBCPINT_MASK		(0x1 << CONTROL2_USBCPINT_SHIFT)
-#define CONTROL2_RCPS_MASK		(0x1 << CONTROL2_RCPS_SHIFT)
-
-#define CONTROL3_JIGSET_SHIFT		(0)
-#define CONTROL3_BTLDSET_SHIFT		(2)
-#define CONTROL3_ADCDBSET_SHIFT		(4)
-#define CONTROL3_JIGSET_MASK		(0x3 << CONTROL3_JIGSET_SHIFT)
-#define CONTROL3_BTLDSET_MASK		(0x3 << CONTROL3_BTLDSET_SHIFT)
-#define CONTROL3_ADCDBSET_MASK		(0x3 << CONTROL3_ADCDBSET_SHIFT)
+#define MAX77693_CONTROL2_LOWPWR_SHIFT		0
+#define MAX77693_CONTROL2_ADCEN_SHIFT		1
+#define MAX77693_CONTROL2_CPEN_SHIFT		2
+#define MAX77693_CONTROL2_SFOUTASRT_SHIFT	3
+#define MAX77693_CONTROL2_SFOUTORD_SHIFT	4
+#define MAX77693_CONTROL2_ACCDET_SHIFT		5
+#define MAX77693_CONTROL2_USBCPINT_SHIFT	6
+#define MAX77693_CONTROL2_RCPS_SHIFT		7
+#define MAX77693_CONTROL2_LOWPWR_MASK		BIT(MAX77693_CONTROL2_LOWPWR_SHIFT)
+#define MAX77693_CONTROL2_ADCEN_MASK		BIT(MAX77693_CONTROL2_ADCEN_SHIFT)
+#define MAX77693_CONTROL2_CPEN_MASK		BIT(MAX77693_CONTROL2_CPEN_SHIFT)
+#define MAX77693_CONTROL2_SFOUTASRT_MASK	BIT(MAX77693_CONTROL2_SFOUTASRT_SHIFT)
+#define MAX77693_CONTROL2_SFOUTORD_MASK		BIT(MAX77693_CONTROL2_SFOUTORD_SHIFT)
+#define MAX77693_CONTROL2_ACCDET_MASK		BIT(MAX77693_CONTROL2_ACCDET_SHIFT)
+#define MAX77693_CONTROL2_USBCPINT_MASK		BIT(MAX77693_CONTROL2_USBCPINT_SHIFT)
+#define MAX77693_CONTROL2_RCPS_MASK		BIT(MAX77693_CONTROL2_RCPS_SHIFT)
+
+#define MAX77693_CONTROL3_JIGSET_SHIFT		0
+#define MAX77693_CONTROL3_BTLDSET_SHIFT		2
+#define MAX77693_CONTROL3_ADCDBSET_SHIFT	4
+#define MAX77693_CONTROL3_JIGSET_MASK		(0x3 << MAX77693_CONTROL3_JIGSET_SHIFT)
+#define MAX77693_CONTROL3_BTLDSET_MASK		(0x3 << MAX77693_CONTROL3_BTLDSET_SHIFT)
+#define MAX77693_CONTROL3_ADCDBSET_MASK		(0x3 << MAX77693_CONTROL3_ADCDBSET_SHIFT)
 
 /* Slave addr = 0x90: Haptic */
 enum max77693_haptic_reg {
-- 
2.1.4


  parent reply	other threads:[~2015-05-24  5:45 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-24  5:43 [PATCH v2 0/9] regulator/power/mfd/input/extcon: Merge max77843 into max77693 Krzysztof Kozlowski
2015-05-24  5:43 ` [PATCH v2 1/9] mfd/extcon: max77693: Remove unused extern declarations and max77693_dev members Krzysztof Kozlowski
2015-05-24  5:43 ` [PATCH v2 2/9] mfd: max77693: Store I2C device type as enum and add default unknown Krzysztof Kozlowski
2015-05-27 10:23   ` Lee Jones
2015-05-27 11:13     ` Krzysztof Kozłowski
2015-05-27 12:15       ` Lee Jones
2015-05-27 12:24         ` Lee Jones
2015-05-27 12:24           ` Lee Jones
2015-05-24  5:43 ` [PATCH v2 3/9] regulator: max77693: Support different register configurations Krzysztof Kozlowski
2015-05-24  5:43 ` [PATCH v2 4/9] extcon/input/mfd/power/regulator: max77693: Move state container to common header Krzysztof Kozlowski
2015-05-26 17:46   ` Dmitry Torokhov
2015-05-27 10:25   ` Lee Jones
2015-05-27 10:25     ` Lee Jones
2015-05-27 13:55   ` Chanwoo Choi
2015-05-24  5:43 ` [PATCH v2 5/9] extcon/input/mfd/regulator: max77843: Switch to common max77693 state container Krzysztof Kozlowski
2015-05-26 17:46   ` Dmitry Torokhov
2015-05-27 10:25   ` Lee Jones
2015-05-27 13:54   ` Chanwoo Choi
2015-05-24  5:43 ` Krzysztof Kozlowski [this message]
2015-05-27 10:26   ` [PATCH v2 6/9] mfd/extcon: max77693: Rename defines to allow inclusion with max77843 Lee Jones
2015-05-27 13:52   ` Chanwoo Choi
2015-05-24  5:43 ` [PATCH v2 7/9] mfd/extcon: max77843: Rename defines to allow inclusion with max77693 Krzysztof Kozlowski
2015-05-27 13:50   ` Chanwoo Choi
2015-05-27 23:42     ` Krzysztof Kozłowski
2015-05-29 11:06       ` Chanwoo Choi
2015-05-24  5:43 ` [PATCH v2 8/9] regulator: max77693: Add support for MAX77843 device Krzysztof Kozlowski
2015-05-24  5:43 ` [PATCH v2 9/9] regulator: Remove the max77843 driver Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1432446213-4886-7-git-send-email-k.kozlowski.k@gmail.com \
    --to=k.kozlowski.k@gmail.com \
    --cc=broonie@kernel.org \
    --cc=cw00.choi@samsung.com \
    --cc=dbaryshkov@gmail.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=dwmw2@infradead.org \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=myungjoo.ham@samsung.com \
    --cc=sameo@linux.intel.com \
    --cc=sre@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.