All of lore.kernel.org
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
To: Chanwoo Choi <cw00.choi@samsung.com>,
	MyungJoo Ham <myungjoo.ham@samsung.com>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Samuel Ortiz <sameo@linux.intel.com>,
	Lee Jones <lee.jones@linaro.org>,
	Sebastian Reichel <sre@kernel.org>,
	Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>,
	David Woodhouse <dwmw2@infradead.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	linux-kernel@vger.kernel.org, linux-input@vger.kernel.org,
	linux-pm@vger.kernel.org
Cc: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Subject: [PATCH v2 7/9] mfd/extcon: max77843: Rename defines to allow inclusion with max77693
Date: Sun, 24 May 2015 14:43:31 +0900	[thread overview]
Message-ID: <1432446213-4886-8-git-send-email-k.kozlowski.k@gmail.com> (raw)
In-Reply-To: <1432446213-4886-1-git-send-email-k.kozlowski.k@gmail.com>

Add MAX77843_MUIC prefix to some of the defines used in max77843 extcon
driver so the max77693-private.h can be included simultaneously with
max77843-private.h.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/extcon/extcon-max77843.c     |  49 +++++++----
 include/linux/mfd/max77843-private.h | 154 +++++++++++++++++------------------
 2 files changed, 109 insertions(+), 94 deletions(-)

diff --git a/drivers/extcon/extcon-max77843.c b/drivers/extcon/extcon-max77843.c
index 0f5910dcccb7..8a38d4acf026 100644
--- a/drivers/extcon/extcon-max77843.c
+++ b/drivers/extcon/extcon-max77843.c
@@ -206,11 +206,11 @@ static int max77843_muic_set_path(struct max77843_muic_info *info,
 	if (attached)
 		ctrl1 = val;
 	else
-		ctrl1 = CONTROL1_SW_OPEN;
+		ctrl1 = MAX77843_MUIC_CONTROL1_SW_OPEN;
 
 	ret = regmap_update_bits(max77843->regmap_muic,
 			MAX77843_MUIC_REG_CONTROL1,
-			CONTROL1_COM_SW, ctrl1);
+			MAX77843_MUIC_CONTROL1_COM_SW, ctrl1);
 	if (ret < 0) {
 		dev_err(info->dev, "Cannot switch MUIC port\n");
 		return ret;
@@ -244,7 +244,7 @@ static int max77843_muic_get_cable_type(struct max77843_muic_info *info,
 
 	adc = info->status[MAX77843_MUIC_STATUS1] &
 			MAX77843_MUIC_STATUS1_ADC_MASK;
-	adc >>= STATUS1_ADC_SHIFT;
+	adc >>= MAX77843_MUIC_STATUS1_ADC_SHIFT;
 
 	switch (group) {
 	case MAX77843_CABLE_GROUP_ADC:
@@ -310,7 +310,7 @@ static int max77843_muic_get_cable_type(struct max77843_muic_info *info,
 			/* Get VBVolt register bit */
 			gnd_type |= (info->status[MAX77843_MUIC_STATUS2] &
 					MAX77843_MUIC_STATUS2_VBVOLT_MASK);
-			gnd_type >>= STATUS2_VBVOLT_SHIFT;
+			gnd_type >>= MAX77843_MUIC_STATUS2_VBVOLT_SHIFT;
 
 			/* Offset of GND cable */
 			gnd_type |= MAX77843_MUIC_GND_USB_HOST;
@@ -339,7 +339,9 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
 	switch (gnd_cable_type) {
 	case MAX77843_MUIC_GND_USB_HOST:
 	case MAX77843_MUIC_GND_USB_HOST_VB:
-		ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
+		ret = max77843_muic_set_path(info,
+					     MAX77843_MUIC_CONTROL1_SW_USB,
+					     attached);
 		if (ret < 0)
 			return ret;
 
@@ -347,7 +349,9 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
 		break;
 	case MAX77843_MUIC_GND_MHL_VB:
 	case MAX77843_MUIC_GND_MHL:
-		ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+		ret = max77843_muic_set_path(info,
+					     MAX77843_MUIC_CONTROL1_SW_OPEN,
+					     attached);
 		if (ret < 0)
 			return ret;
 
@@ -366,7 +370,7 @@ static int max77843_muic_jig_handler(struct max77843_muic_info *info,
 		int cable_type, bool attached)
 {
 	int ret;
-	u8 path = CONTROL1_SW_OPEN;
+	u8 path = MAX77843_MUIC_CONTROL1_SW_OPEN;
 
 	dev_dbg(info->dev, "external connector is %s (adc:0x%02x)\n",
 			attached ? "attached" : "detached", cable_type);
@@ -374,10 +378,10 @@ static int max77843_muic_jig_handler(struct max77843_muic_info *info,
 	switch (cable_type) {
 	case MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF:
 	case MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON:
-		path = CONTROL1_SW_USB;
+		path = MAX77843_MUIC_CONTROL1_SW_USB;
 		break;
 	case MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF:
-		path = CONTROL1_SW_UART;
+		path = MAX77843_MUIC_CONTROL1_SW_UART;
 		break;
 	default:
 		return -EINVAL;
@@ -475,14 +479,18 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
 
 	switch (chg_type) {
 	case MAX77843_MUIC_CHG_USB:
-		ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
+		ret = max77843_muic_set_path(info,
+					     MAX77843_MUIC_CONTROL1_SW_USB,
+					     attached);
 		if (ret < 0)
 			return ret;
 
 		extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
 		break;
 	case MAX77843_MUIC_CHG_DOWNSTREAM:
-		ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+		ret = max77843_muic_set_path(info,
+					     MAX77843_MUIC_CONTROL1_SW_OPEN,
+					     attached);
 		if (ret < 0)
 			return ret;
 
@@ -490,14 +498,18 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
 					attached);
 		break;
 	case MAX77843_MUIC_CHG_DEDICATED:
-		ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+		ret = max77843_muic_set_path(info,
+					     MAX77843_MUIC_CONTROL1_SW_OPEN,
+					     attached);
 		if (ret < 0)
 			return ret;
 
 		extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
 		break;
 	case MAX77843_MUIC_CHG_SPECIAL_500MA:
-		ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+		ret = max77843_muic_set_path(info,
+					     MAX77843_MUIC_CONTROL1_SW_OPEN,
+					     attached);
 		if (ret < 0)
 			return ret;
 
@@ -505,7 +517,9 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
 					attached);
 		break;
 	case MAX77843_MUIC_CHG_SPECIAL_1A:
-		ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+		ret = max77843_muic_set_path(info,
+					     MAX77843_MUIC_CONTROL1_SW_OPEN,
+					     attached);
 		if (ret < 0)
 			return ret;
 
@@ -529,7 +543,8 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
 			"failed to detect %s accessory (chg_type:0x%x)\n",
 			attached ? "attached" : "detached", chg_type);
 
-		max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+		max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_OPEN,
+				       attached);
 		return -EINVAL;
 	}
 
@@ -668,7 +683,7 @@ static int max77843_muic_set_debounce_time(struct max77843_muic_info *info,
 		ret = regmap_update_bits(max77843->regmap_muic,
 				MAX77843_MUIC_REG_CONTROL4,
 				MAX77843_MUIC_CONTROL4_ADCDBSET_MASK,
-				time << CONTROL4_ADCDBSET_SHIFT);
+				time << MAX77843_MUIC_CONTROL4_ADCDBSET_SHIFT);
 		if (ret < 0) {
 			dev_err(info->dev, "Cannot write MUIC regmap\n");
 			return ret;
@@ -769,7 +784,7 @@ static int max77843_muic_probe(struct platform_device *pdev)
 	max77843_muic_set_debounce_time(info, MAX77843_DEBOUNCE_TIME_25MS);
 
 	/* Set initial path for UART */
-	max77843_muic_set_path(info, CONTROL1_SW_UART, true);
+	max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_UART, true);
 
 	/* Check revision number of MUIC device */
 	ret = regmap_read(max77843->regmap_muic, MAX77843_MUIC_REG_ID, &id);
diff --git a/include/linux/mfd/max77843-private.h b/include/linux/mfd/max77843-private.h
index 0121d9440340..c19303b0ccfd 100644
--- a/include/linux/mfd/max77843-private.h
+++ b/include/linux/mfd/max77843-private.h
@@ -318,62 +318,62 @@ enum max77843_irq_muic {
 	MAX77843_INTSRCMASK_SYS_MASK | MAX77843_INTSRCMASK_CHGR_MASK)
 
 /* MAX77843 STATUS register*/
-#define STATUS1_ADC_SHIFT			0
-#define STATUS1_ADCERROR_SHIFT			6
-#define STATUS1_ADC1K_SHIFT			7
-#define STATUS2_CHGTYP_SHIFT			0
-#define STATUS2_CHGDETRUN_SHIFT			3
-#define STATUS2_DCDTMR_SHIFT			4
-#define STATUS2_DXOVP_SHIFT			5
-#define STATUS2_VBVOLT_SHIFT			6
-#define STATUS3_VBADC_SHIFT			0
-#define STATUS3_VDNMON_SHIFT			4
-#define STATUS3_DNRES_SHIFT			5
-#define STATUS3_MPNACK_SHIFT			6
-
-#define MAX77843_MUIC_STATUS1_ADC_MASK		(0x1f << STATUS1_ADC_SHIFT)
-#define MAX77843_MUIC_STATUS1_ADCERROR_MASK	BIT(STATUS1_ADCERROR_SHIFT)
-#define MAX77843_MUIC_STATUS1_ADC1K_MASK	BIT(STATUS1_ADC1K_SHIFT)
-#define MAX77843_MUIC_STATUS2_CHGTYP_MASK	(0x7 << STATUS2_CHGTYP_SHIFT)
-#define MAX77843_MUIC_STATUS2_CHGDETRUN_MASK	BIT(STATUS2_CHGDETRUN_SHIFT)
-#define MAX77843_MUIC_STATUS2_DCDTMR_MASK	BIT(STATUS2_DCDTMR_SHIFT)
-#define MAX77843_MUIC_STATUS2_DXOVP_MASK	BIT(STATUS2_DXOVP_SHIFT)
-#define MAX77843_MUIC_STATUS2_VBVOLT_MASK	BIT(STATUS2_VBVOLT_SHIFT)
-#define MAX77843_MUIC_STATUS3_VBADC_MASK	(0xf << STATUS3_VBADC_SHIFT)
-#define MAX77843_MUIC_STATUS3_VDNMON_MASK	BIT(STATUS3_VDNMON_SHIFT)
-#define MAX77843_MUIC_STATUS3_DNRES_MASK	BIT(STATUS3_DNRES_SHIFT)
-#define MAX77843_MUIC_STATUS3_MPNACK_MASK	BIT(STATUS3_MPNACK_SHIFT)
+#define MAX77843_MUIC_STATUS1_ADC_SHIFT		0
+#define MAX77843_MUIC_STATUS1_ADCERROR_SHIFT	6
+#define MAX77843_MUIC_STATUS1_ADC1K_SHIFT	7
+#define MAX77843_MUIC_STATUS2_CHGTYP_SHIFT	0
+#define MAX77843_MUIC_STATUS2_CHGDETRUN_SHIFT	3
+#define MAX77843_MUIC_STATUS2_DCDTMR_SHIFT	4
+#define MAX77843_MUIC_STATUS2_DXOVP_SHIFT	5
+#define MAX77843_MUIC_STATUS2_VBVOLT_SHIFT	6
+#define MAX77843_MUIC_STATUS3_VBADC_SHIFT	0
+#define MAX77843_MUIC_STATUS3_VDNMON_SHIFT	4
+#define MAX77843_MUIC_STATUS3_DNRES_SHIFT	5
+#define MAX77843_MUIC_STATUS3_MPNACK_SHIFT	6
+
+#define MAX77843_MUIC_STATUS1_ADC_MASK		(0x1f << MAX77843_MUIC_STATUS1_ADC_SHIFT)
+#define MAX77843_MUIC_STATUS1_ADCERROR_MASK	BIT(MAX77843_MUIC_STATUS1_ADCERROR_SHIFT)
+#define MAX77843_MUIC_STATUS1_ADC1K_MASK	BIT(MAX77843_MUIC_STATUS1_ADC1K_SHIFT)
+#define MAX77843_MUIC_STATUS2_CHGTYP_MASK	(0x7 << MAX77843_MUIC_STATUS2_CHGTYP_SHIFT)
+#define MAX77843_MUIC_STATUS2_CHGDETRUN_MASK	BIT(MAX77843_MUIC_STATUS2_CHGDETRUN_SHIFT)
+#define MAX77843_MUIC_STATUS2_DCDTMR_MASK	BIT(MAX77843_MUIC_STATUS2_DCDTMR_SHIFT)
+#define MAX77843_MUIC_STATUS2_DXOVP_MASK	BIT(MAX77843_MUIC_STATUS2_DXOVP_SHIFT)
+#define MAX77843_MUIC_STATUS2_VBVOLT_MASK	BIT(MAX77843_MUIC_STATUS2_VBVOLT_SHIFT)
+#define MAX77843_MUIC_STATUS3_VBADC_MASK	(0xf << MAX77843_MUIC_STATUS3_VBADC_SHIFT)
+#define MAX77843_MUIC_STATUS3_VDNMON_MASK	BIT(MAX77843_MUIC_STATUS3_VDNMON_SHIFT)
+#define MAX77843_MUIC_STATUS3_DNRES_MASK	BIT(MAX77843_MUIC_STATUS3_DNRES_SHIFT)
+#define MAX77843_MUIC_STATUS3_MPNACK_MASK	BIT(MAX77843_MUIC_STATUS3_MPNACK_SHIFT)
 
 /* MAX77843 CONTROL register */
-#define CONTROL1_COMP1SW_SHIFT			0
-#define CONTROL1_COMP2SW_SHIFT			3
-#define CONTROL1_IDBEN_SHIFT			7
-#define CONTROL2_LOWPWR_SHIFT			0
-#define CONTROL2_ADCEN_SHIFT			1
-#define CONTROL2_CPEN_SHIFT			2
-#define CONTROL2_ACC_DET_SHIFT			5
-#define CONTROL2_USBCPINT_SHIFT			6
-#define CONTROL2_RCPS_SHIFT			7
-#define CONTROL3_JIGSET_SHIFT			0
-#define CONTROL4_ADCDBSET_SHIFT			0
-#define CONTROL4_USBAUTO_SHIFT			4
-#define CONTROL4_FCTAUTO_SHIFT			5
-#define CONTROL4_ADCMODE_SHIFT			6
-
-#define MAX77843_MUIC_CONTROL1_COMP1SW_MASK	(0x7 << CONTROL1_COMP1SW_SHIFT)
-#define MAX77843_MUIC_CONTROL1_COMP2SW_MASK	(0x7 << CONTROL1_COMP2SW_SHIFT)
-#define MAX77843_MUIC_CONTROL1_IDBEN_MASK	BIT(CONTROL1_IDBEN_SHIFT)
-#define MAX77843_MUIC_CONTROL2_LOWPWR_MASK	BIT(CONTROL2_LOWPWR_SHIFT)
-#define MAX77843_MUIC_CONTROL2_ADCEN_MASK	BIT(CONTROL2_ADCEN_SHIFT)
-#define MAX77843_MUIC_CONTROL2_CPEN_MASK	BIT(CONTROL2_CPEN_SHIFT)
-#define MAX77843_MUIC_CONTROL2_ACC_DET_MASK	BIT(CONTROL2_ACC_DET_SHIFT)
-#define MAX77843_MUIC_CONTROL2_USBCPINT_MASK	BIT(CONTROL2_USBCPINT_SHIFT)
-#define MAX77843_MUIC_CONTROL2_RCPS_MASK	BIT(CONTROL2_RCPS_SHIFT)
-#define MAX77843_MUIC_CONTROL3_JIGSET_MASK	(0x3 << CONTROL3_JIGSET_SHIFT)
-#define MAX77843_MUIC_CONTROL4_ADCDBSET_MASK	(0x3 << CONTROL4_ADCDBSET_SHIFT)
-#define MAX77843_MUIC_CONTROL4_USBAUTO_MASK	BIT(CONTROL4_USBAUTO_SHIFT)
-#define MAX77843_MUIC_CONTROL4_FCTAUTO_MASK	BIT(CONTROL4_FCTAUTO_SHIFT)
-#define MAX77843_MUIC_CONTROL4_ADCMODE_MASK	(0x3 << CONTROL4_ADCMODE_SHIFT)
+#define MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT	0
+#define MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT	3
+#define MAX77843_MUIC_CONTROL1_IDBEN_SHIFT	7
+#define MAX77843_MUIC_CONTROL2_LOWPWR_SHIFT	0
+#define MAX77843_MUIC_CONTROL2_ADCEN_SHIFT	1
+#define MAX77843_MUIC_CONTROL2_CPEN_SHIFT	2
+#define MAX77843_MUIC_CONTROL2_ACC_DET_SHIFT	5
+#define MAX77843_MUIC_CONTROL2_USBCPINT_SHIFT	6
+#define MAX77843_MUIC_CONTROL2_RCPS_SHIFT	7
+#define MAX77843_MUIC_CONTROL3_JIGSET_SHIFT	0
+#define MAX77843_MUIC_CONTROL4_ADCDBSET_SHIFT	0
+#define MAX77843_MUIC_CONTROL4_USBAUTO_SHIFT	4
+#define MAX77843_MUIC_CONTROL4_FCTAUTO_SHIFT	5
+#define MAX77843_MUIC_CONTROL4_ADCMODE_SHIFT	6
+
+#define MAX77843_MUIC_CONTROL1_COMP1SW_MASK	(0x7 << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT)
+#define MAX77843_MUIC_CONTROL1_COMP2SW_MASK	(0x7 << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT)
+#define MAX77843_MUIC_CONTROL1_IDBEN_MASK	BIT(MAX77843_MUIC_CONTROL1_IDBEN_SHIFT)
+#define MAX77843_MUIC_CONTROL2_LOWPWR_MASK	BIT(MAX77843_MUIC_CONTROL2_LOWPWR_SHIFT)
+#define MAX77843_MUIC_CONTROL2_ADCEN_MASK	BIT(MAX77843_MUIC_CONTROL2_ADCEN_SHIFT)
+#define MAX77843_MUIC_CONTROL2_CPEN_MASK	BIT(MAX77843_MUIC_CONTROL2_CPEN_SHIFT)
+#define MAX77843_MUIC_CONTROL2_ACC_DET_MASK	BIT(MAX77843_MUIC_CONTROL2_ACC_DET_SHIFT)
+#define MAX77843_MUIC_CONTROL2_USBCPINT_MASK	BIT(MAX77843_MUIC_CONTROL2_USBCPINT_SHIFT)
+#define MAX77843_MUIC_CONTROL2_RCPS_MASK	BIT(MAX77843_MUIC_CONTROL2_RCPS_SHIFT)
+#define MAX77843_MUIC_CONTROL3_JIGSET_MASK	(0x3 << MAX77843_MUIC_CONTROL3_JIGSET_SHIFT)
+#define MAX77843_MUIC_CONTROL4_ADCDBSET_MASK	(0x3 << MAX77843_MUIC_CONTROL4_ADCDBSET_SHIFT)
+#define MAX77843_MUIC_CONTROL4_USBAUTO_MASK	BIT(MAX77843_MUIC_CONTROL4_USBAUTO_SHIFT)
+#define MAX77843_MUIC_CONTROL4_FCTAUTO_MASK	BIT(MAX77843_MUIC_CONTROL4_FCTAUTO_SHIFT)
+#define MAX77843_MUIC_CONTROL4_ADCMODE_MASK	(0x3 << MAX77843_MUIC_CONTROL4_ADCMODE_SHIFT)
 
 /* MAX77843 switch port */
 #define COM_OPEN				0
@@ -383,38 +383,38 @@ enum max77843_irq_muic {
 #define COM_AUX_USB				4
 #define COM_AUX_UART				5
 
-#define CONTROL1_COM_SW \
+#define MAX77843_MUIC_CONTROL1_COM_SW \
 	((MAX77843_MUIC_CONTROL1_COMP1SW_MASK | \
 	 MAX77843_MUIC_CONTROL1_COMP2SW_MASK))
 
-#define CONTROL1_SW_OPEN \
-	((COM_OPEN << CONTROL1_COMP1SW_SHIFT | \
-	 COM_OPEN << CONTROL1_COMP2SW_SHIFT))
-#define CONTROL1_SW_USB \
-	((COM_USB << CONTROL1_COMP1SW_SHIFT | \
-	 COM_USB << CONTROL1_COMP2SW_SHIFT))
-#define CONTROL1_SW_AUDIO \
-	((COM_AUDIO << CONTROL1_COMP1SW_SHIFT | \
-	 COM_AUDIO << CONTROL1_COMP2SW_SHIFT))
-#define CONTROL1_SW_UART \
-	((COM_UART << CONTROL1_COMP1SW_SHIFT | \
-	 COM_UART << CONTROL1_COMP2SW_SHIFT))
-#define CONTROL1_SW_AUX_USB \
-	((COM_AUX_USB << CONTROL1_COMP1SW_SHIFT | \
-	 COM_AUX_USB << CONTROL1_COMP2SW_SHIFT))
-#define CONTROL1_SW_AUX_UART \
-	((COM_AUX_UART << CONTROL1_COMP1SW_SHIFT | \
-	 COM_AUX_UART << CONTROL1_COMP2SW_SHIFT))
+#define MAX77843_MUIC_CONTROL1_SW_OPEN \
+	((COM_OPEN << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT | \
+	 COM_OPEN << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT))
+#define MAX77843_MUIC_CONTROL1_SW_USB \
+	((COM_USB << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT | \
+	 COM_USB << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT))
+#define MAX77843_MUIC_CONTROL1_SW_AUDIO \
+	((COM_AUDIO << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT | \
+	 COM_AUDIO << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT))
+#define MAX77843_MUIC_CONTROL1_SW_UART \
+	((COM_UART << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT | \
+	 COM_UART << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT))
+#define MAX77843_MUIC_CONTROL1_SW_AUX_USB \
+	((COM_AUX_USB << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT | \
+	 COM_AUX_USB << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT))
+#define MAX77843_MUIC_CONTROL1_SW_AUX_UART \
+	((COM_AUX_UART << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT | \
+	 COM_AUX_UART << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT))
 
 #define MAX77843_DISABLE			0
 #define MAX77843_ENABLE				1
 
 #define CONTROL4_AUTO_DISABLE \
-	((MAX77843_DISABLE << CONTROL4_USBAUTO_SHIFT) | \
-	(MAX77843_DISABLE << CONTROL4_FCTAUTO_SHIFT))
+	((MAX77843_DISABLE << MAX77843_MUIC_CONTROL4_USBAUTO_SHIFT) | \
+	(MAX77843_DISABLE << MAX77843_MUIC_CONTROL4_FCTAUTO_SHIFT))
 #define CONTROL4_AUTO_ENABLE \
-	((MAX77843_ENABLE << CONTROL4_USBAUTO_SHIFT) | \
-	(MAX77843_ENABLE << CONTROL4_FCTAUTO_SHIFT))
+	((MAX77843_ENABLE << MAX77843_MUIC_CONTROL4_USBAUTO_SHIFT) | \
+	(MAX77843_ENABLE << MAX77843_MUIC_CONTROL4_FCTAUTO_SHIFT))
 
 /* MAX77843 SAFEOUT LDO Control register */
 #define SAFEOUTCTRL_SAFEOUT1_SHIFT		0
-- 
2.1.4


  parent reply	other threads:[~2015-05-24  5:45 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-24  5:43 [PATCH v2 0/9] regulator/power/mfd/input/extcon: Merge max77843 into max77693 Krzysztof Kozlowski
2015-05-24  5:43 ` [PATCH v2 1/9] mfd/extcon: max77693: Remove unused extern declarations and max77693_dev members Krzysztof Kozlowski
2015-05-24  5:43 ` [PATCH v2 2/9] mfd: max77693: Store I2C device type as enum and add default unknown Krzysztof Kozlowski
2015-05-27 10:23   ` Lee Jones
2015-05-27 11:13     ` Krzysztof Kozłowski
2015-05-27 12:15       ` Lee Jones
2015-05-27 12:24         ` Lee Jones
2015-05-27 12:24           ` Lee Jones
2015-05-24  5:43 ` [PATCH v2 3/9] regulator: max77693: Support different register configurations Krzysztof Kozlowski
2015-05-24  5:43 ` [PATCH v2 4/9] extcon/input/mfd/power/regulator: max77693: Move state container to common header Krzysztof Kozlowski
2015-05-26 17:46   ` Dmitry Torokhov
2015-05-27 10:25   ` Lee Jones
2015-05-27 10:25     ` Lee Jones
2015-05-27 13:55   ` Chanwoo Choi
2015-05-24  5:43 ` [PATCH v2 5/9] extcon/input/mfd/regulator: max77843: Switch to common max77693 state container Krzysztof Kozlowski
2015-05-26 17:46   ` Dmitry Torokhov
2015-05-27 10:25   ` Lee Jones
2015-05-27 13:54   ` Chanwoo Choi
2015-05-24  5:43 ` [PATCH v2 6/9] mfd/extcon: max77693: Rename defines to allow inclusion with max77843 Krzysztof Kozlowski
2015-05-27 10:26   ` Lee Jones
2015-05-27 13:52   ` Chanwoo Choi
2015-05-24  5:43 ` Krzysztof Kozlowski [this message]
2015-05-27 13:50   ` [PATCH v2 7/9] mfd/extcon: max77843: Rename defines to allow inclusion with max77693 Chanwoo Choi
2015-05-27 23:42     ` Krzysztof Kozłowski
2015-05-29 11:06       ` Chanwoo Choi
2015-05-24  5:43 ` [PATCH v2 8/9] regulator: max77693: Add support for MAX77843 device Krzysztof Kozlowski
2015-05-24  5:43 ` [PATCH v2 9/9] regulator: Remove the max77843 driver Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1432446213-4886-8-git-send-email-k.kozlowski.k@gmail.com \
    --to=k.kozlowski.k@gmail.com \
    --cc=broonie@kernel.org \
    --cc=cw00.choi@samsung.com \
    --cc=dbaryshkov@gmail.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=dwmw2@infradead.org \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=myungjoo.ham@samsung.com \
    --cc=sameo@linux.intel.com \
    --cc=sre@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.