All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bard Liao <bardliao@realtek.com>
To: broonie@kernel.org, lgirdwood@gmail.com
Cc: oder_chiou@realtek.com, alsa-devel@alsa-project.org,
	lars@metafoo.de, zhengxing@rock-chips.com, yang.a.fang@intel.com,
	koro.chen@mediatek.com, john.lin@realtek.com,
	Leilk.Liu@mediatek.com, Bard Liao <bardliao@realtek.com>,
	flove@realtek.com
Subject: [PATCH v2 1/2] ASoC: rt5645: change gpio to gpiod APIs
Date: Fri, 29 May 2015 18:16:46 +0800	[thread overview]
Message-ID: <1432894607-28489-1-git-send-email-bardliao@realtek.com> (raw)

Move gpio to gpio_desc and use gpiod APIs in codec driver.

Signed-off-by: Bard Liao <bardliao@realtek.com>
---
 include/sound/rt5645.h    |  3 ---
 sound/soc/codecs/rt5645.c | 47 +++++++++++++----------------------------------
 sound/soc/codecs/rt5645.h |  1 +
 3 files changed, 14 insertions(+), 37 deletions(-)

diff --git a/include/sound/rt5645.h b/include/sound/rt5645.h
index 652cb9e..22734bc 100644
--- a/include/sound/rt5645.h
+++ b/include/sound/rt5645.h
@@ -20,9 +20,6 @@ struct rt5645_platform_data {
 	unsigned int dmic2_data_pin;
 	/* 0 = IN2P; 1 = GPIO6; 2 = GPIO10; 3 = GPIO12 */
 
-	unsigned int hp_det_gpio;
-	bool gpio_hp_det_active_high;
-
 	unsigned int jd_mode;
 };
 
diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c
index aaede45..0cb4942 100644
--- a/sound/soc/codecs/rt5645.c
+++ b/sound/soc/codecs/rt5645.c
@@ -2938,17 +2938,11 @@ static int rt5645_irq_detection(struct rt5645_priv *rt5645)
 
 	switch (rt5645->pdata.jd_mode) {
 	case 0: /* Not using rt5645 JD */
-		if (gpio_is_valid(rt5645->pdata.hp_det_gpio)) {
-			gpio_state = gpio_get_value(rt5645->pdata.hp_det_gpio);
-			dev_dbg(rt5645->codec->dev, "gpio = %d(%d)\n",
-				rt5645->pdata.hp_det_gpio, gpio_state);
-		}
-		if ((rt5645->pdata.gpio_hp_det_active_high && gpio_state) ||
-			(!rt5645->pdata.gpio_hp_det_active_high &&
-			 !gpio_state)) {
-			report = rt5645_jack_detect(rt5645->codec, 1);
-		} else {
-			report = rt5645_jack_detect(rt5645->codec, 0);
+		if (rt5645->gpiod_hp_det) {
+			gpio_state = gpiod_get_value(rt5645->gpiod_hp_det);
+			dev_dbg(rt5645->codec->dev, "gpio_state = %d\n",
+				gpio_state);
+			report = rt5645_jack_detect(rt5645->codec, gpio_state);
 		}
 		snd_soc_jack_report(rt5645->hp_jack,
 				    report, SND_JACK_HEADPHONE);
@@ -3253,19 +3247,17 @@ static int rt5645_i2c_probe(struct i2c_client *i2c,
 	} else {
 		if (dmi_check_system(dmi_platform_intel_braswell)) {
 			rt5645->pdata = *rt5645_pdata;
-			gpiod = devm_gpiod_get_index(&i2c->dev, "rt5645", 0);
-
-			if (IS_ERR(gpiod) || gpiod_direction_input(gpiod)) {
-				rt5645->pdata.hp_det_gpio = -1;
-				dev_err(&i2c->dev, "failed to initialize gpiod\n");
-			} else {
-				rt5645->pdata.hp_det_gpio = desc_to_gpio(gpiod);
-				rt5645->pdata.gpio_hp_det_active_high
-						= !gpiod_is_active_low(gpiod);
-			}
 		}
 	}
 
+	rt5645->gpiod_hp_det = devm_gpiod_get_index(&i2c->dev, "rt5645", 0);
+
+	if (IS_ERR(rt5645->gpiod_hp_det) ||
+	    gpiod_direction_input(rt5645->gpiod_hp_det)) {
+		rt5645->gpiod_hp_det = NULL;
+		dev_err(&i2c->dev, "failed to initialize gpiod\n");
+	}
+
 	rt5645->regmap = devm_regmap_init_i2c(i2c, &rt5645_regmap);
 	if (IS_ERR(rt5645->regmap)) {
 		ret = PTR_ERR(rt5645->regmap);
@@ -3425,16 +3417,6 @@ static int rt5645_i2c_probe(struct i2c_client *i2c,
 			dev_err(&i2c->dev, "Failed to reguest IRQ: %d\n", ret);
 	}
 
-	if (gpio_is_valid(rt5645->pdata.hp_det_gpio)) {
-		ret = gpio_request(rt5645->pdata.hp_det_gpio, "rt5645");
-		if (ret)
-			dev_err(&i2c->dev, "Fail gpio_request hp_det_gpio\n");
-
-		ret = gpio_direction_input(rt5645->pdata.hp_det_gpio);
-		if (ret)
-			dev_err(&i2c->dev, "Fail gpio_direction hp_det_gpio\n");
-	}
-
 	INIT_DELAYED_WORK(&rt5645->jack_detect_work, rt5645_jack_detect_work);
 
 	return snd_soc_register_codec(&i2c->dev, &soc_codec_dev_rt5645,
@@ -3450,9 +3432,6 @@ static int rt5645_i2c_remove(struct i2c_client *i2c)
 
 	cancel_delayed_work_sync(&rt5645->jack_detect_work);
 
-	if (gpio_is_valid(rt5645->pdata.hp_det_gpio))
-		gpio_free(rt5645->pdata.hp_det_gpio);
-
 	snd_soc_unregister_codec(&i2c->dev);
 
 	return 0;
diff --git a/sound/soc/codecs/rt5645.h b/sound/soc/codecs/rt5645.h
index 9ec4e89..0353a6a 100644
--- a/sound/soc/codecs/rt5645.h
+++ b/sound/soc/codecs/rt5645.h
@@ -2182,6 +2182,7 @@ struct rt5645_priv {
 	struct rt5645_platform_data pdata;
 	struct regmap *regmap;
 	struct i2c_client *i2c;
+	struct gpio_desc *gpiod_hp_det;
 	struct snd_soc_jack *hp_jack;
 	struct snd_soc_jack *mic_jack;
 	struct snd_soc_jack *btn_jack;
-- 
1.8.1.1.439.g50a6b54

             reply	other threads:[~2015-05-29 10:17 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-29 10:16 Bard Liao [this message]
2015-05-29 10:16 ` [PATCH v2 2/2] ASoC: rt5645: add device tree support Bard Liao
2015-05-29 16:31   ` Lars-Peter Clausen
2015-05-29 14:23 ` [PATCH v2 1/2] ASoC: rt5645: change gpio to gpiod APIs Michele Curti
2015-05-29 16:31 ` Lars-Peter Clausen
2015-06-02 17:16   ` Mark Brown
2015-06-03 12:03     ` Bard Liao
2015-06-03 12:08       ` Lars-Peter Clausen
2015-06-03 12:13       ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1432894607-28489-1-git-send-email-bardliao@realtek.com \
    --to=bardliao@realtek.com \
    --cc=Leilk.Liu@mediatek.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=flove@realtek.com \
    --cc=john.lin@realtek.com \
    --cc=koro.chen@mediatek.com \
    --cc=lars@metafoo.de \
    --cc=lgirdwood@gmail.com \
    --cc=oder_chiou@realtek.com \
    --cc=yang.a.fang@intel.com \
    --cc=zhengxing@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.