From: Ben Hutchings <ben.hutchings@codethink.co.uk> To: Ian Molton <ian@mnementh.co.uk>, Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: linux-mmc@vger.kernel.org, linux-sh@vger.kernel.org, linux-gpio@vger.kernel.org, linux-kernel@lists.codethink.co.uk, Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>, Simon Horman <horms@verge.net.au>, Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Subject: [PATCH v3 5/6] ARM: shmobile: lager: Set clock rates for SDHI Date: Fri, 26 Jun 2015 15:23:50 +0000 [thread overview] Message-ID: <1435332230.23818.12.camel@codethink.co.uk> (raw) In-Reply-To: <1435332116.23818.7.camel@codethink.co.uk> Set the input clocks to the highest supported speeds. Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> --- arch/arm/boot/dts/r8a7790-lager.dts | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index aaa4f258e279..5f68e53c58ae 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -488,6 +488,9 @@ pinctrl-0 = <&sdhi0_pins>; pinctrl-names = "default"; + assigned-clocks = <&mstp3_clks R8A7790_CLK_SDHI0>; + assigned-clock-rates = <156000000>; + vmmc-supply = <&vcc_sdhi0>; vqmmc-supply = <&vccq_sdhi0>; cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; @@ -498,6 +501,9 @@ pinctrl-0 = <&sdhi2_pins>; pinctrl-names = "default"; + assigned-clocks = <&mstp3_clks R8A7790_CLK_SDHI2>; + assigned-clock-rates = <97500000>; + vmmc-supply = <&vcc_sdhi2>; vqmmc-supply = <&vccq_sdhi2>; cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; -- 2.1.4
WARNING: multiple messages have this Message-ID (diff)
From: Ben Hutchings <ben.hutchings@codethink.co.uk> To: Ian Molton <ian@mnementh.co.uk>, Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: linux-mmc@vger.kernel.org, linux-sh@vger.kernel.org, linux-gpio@vger.kernel.org, linux-kernel@lists.codethink.co.uk, Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>, Simon Horman <horms@verge.net.au>, Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Subject: [PATCH v3 5/6] ARM: shmobile: lager: Set clock rates for SDHI Date: Fri, 26 Jun 2015 16:23:50 +0100 [thread overview] Message-ID: <1435332230.23818.12.camel@codethink.co.uk> (raw) In-Reply-To: <1435332116.23818.7.camel@codethink.co.uk> Set the input clocks to the highest supported speeds. Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> --- arch/arm/boot/dts/r8a7790-lager.dts | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index aaa4f258e279..5f68e53c58ae 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -488,6 +488,9 @@ pinctrl-0 = <&sdhi0_pins>; pinctrl-names = "default"; + assigned-clocks = <&mstp3_clks R8A7790_CLK_SDHI0>; + assigned-clock-rates = <156000000>; + vmmc-supply = <&vcc_sdhi0>; vqmmc-supply = <&vccq_sdhi0>; cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; @@ -498,6 +501,9 @@ pinctrl-0 = <&sdhi2_pins>; pinctrl-names = "default"; + assigned-clocks = <&mstp3_clks R8A7790_CLK_SDHI2>; + assigned-clock-rates = <97500000>; + vmmc-supply = <&vcc_sdhi2>; vqmmc-supply = <&vccq_sdhi2>; cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; -- 2.1.4
next prev parent reply other threads:[~2015-06-26 15:23 UTC|newest] Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-06-26 15:21 [PATCH v3 0/6] UHS-I support for sh_mobile_sdhi Ben Hutchings 2015-06-26 15:21 ` Ben Hutchings 2015-06-26 15:22 ` [PATCH v3 1/6] mmc: tmio: Add UHS-I mode support Ben Hutchings 2015-06-26 15:22 ` Ben Hutchings 2015-06-26 15:23 ` [PATCH v3 2/6] pinctrl: sh-pfc: Implement pinconf power-source param for voltage switching Ben Hutchings 2015-06-26 15:23 ` Ben Hutchings 2015-06-29 8:17 ` Geert Uytterhoeven 2015-06-29 8:17 ` Geert Uytterhoeven 2015-06-29 8:32 ` Laurent Pinchart 2015-06-29 8:32 ` Laurent Pinchart 2015-06-29 21:55 ` Ben Hutchings 2015-06-29 21:55 ` Ben Hutchings 2015-06-26 15:23 ` [PATCH v3 3/6] pinctrl: sh-pfc: r8a7790: Implement voltage switching for SDHI Ben Hutchings 2015-06-26 15:23 ` Ben Hutchings 2015-06-29 8:50 ` Laurent Pinchart 2015-06-29 8:50 ` Laurent Pinchart 2015-06-29 23:44 ` Ben Hutchings 2015-06-29 23:44 ` Ben Hutchings 2015-06-26 15:23 ` [PATCH v3 4/6] mmc: sh_mobile_sdhi: Add UHS-I mode support Ben Hutchings 2015-06-26 15:23 ` Ben Hutchings 2015-06-26 15:23 ` Ben Hutchings [this message] 2015-06-26 15:23 ` [PATCH v3 5/6] ARM: shmobile: lager: Set clock rates for SDHI Ben Hutchings 2015-06-29 6:23 ` Kuninori Morimoto 2015-06-30 0:02 ` Ben Hutchings 2015-06-30 0:02 ` Ben Hutchings 2015-06-30 1:29 ` Ben Hutchings 2015-06-30 1:29 ` Ben Hutchings 2015-06-30 1:31 ` Ben Hutchings 2015-06-30 1:31 ` Ben Hutchings 2015-06-30 1:45 ` Kuninori Morimoto 2015-06-30 2:06 ` Ben Hutchings 2015-06-30 2:06 ` Ben Hutchings 2015-06-30 4:43 ` Kuninori Morimoto 2015-06-30 4:43 ` Kuninori Morimoto 2015-06-26 15:23 ` [PATCH v3 6/6] ARM: shmobile: lager: Enable UHS-I SDR-50 Ben Hutchings 2015-06-26 15:23 ` Ben Hutchings 2015-06-26 15:25 ` [PATCH v3 0/6] UHS-I support for sh_mobile_sdhi Ben Hutchings 2015-06-26 15:25 ` Ben Hutchings
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1435332230.23818.12.camel@codethink.co.uk \ --to=ben.hutchings@codethink.co.uk \ --cc=horms@verge.net.au \ --cc=ian@mnementh.co.uk \ --cc=kuninori.morimoto.gx@renesas.com \ --cc=laurent.pinchart@ideasonboard.com \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-kernel@lists.codethink.co.uk \ --cc=linux-mmc@vger.kernel.org \ --cc=linux-sh@vger.kernel.org \ --cc=sergei.shtylyov@cogentembedded.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.