All of lore.kernel.org
 help / color / mirror / Atom feed
From: Pi-Cheng Chen <pi-cheng.chen@linaro.org>
To: Viresh Kumar <viresh.kumar@linaro.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
	linaro-kernel@lists.linaro.org,
	linux-mediatek@lists.infradead.org
Subject: [PATCH v5 1/2] dt-bindings: mediatek: Add MT8173 cpufreq driver binding
Date: Wed,  1 Jul 2015 10:16:44 +0800	[thread overview]
Message-ID: <1435717005-20012-2-git-send-email-pi-cheng.chen@linaro.org> (raw)
In-Reply-To: <1435717005-20012-1-git-send-email-pi-cheng.chen@linaro.org>

This patch adds device tree binding document for MT8173 cpufreq driver.

Signed-off-by: Pi-Cheng Chen <pi-cheng.chen@linaro.org>
Reviewed-by: Michael Turquette <mturquette@baylibre.com>
---
 .../devicetree/bindings/cpufreq/cpufreq-mt8173.txt | 145 +++++++++++++++++++++
 1 file changed, 145 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-mt8173.txt

diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mt8173.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-mt8173.txt
new file mode 100644
index 0000000..65701c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mt8173.txt
@@ -0,0 +1,145 @@
+
+Mediatek MT8173 cpufreq driver
+------------------------------
+
+Mediatek MT8173 cpufreq driver for CPU frequency scaling.
+
+Required properties:
+- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock names.
+- clock-names: Should contain the following:
+	"cpu"		- The multiplexer for clock input of CPU cluster.
+	"intermediate"	- A parent of "cpu" clock which is used as "intermediate" clock
+			  source (usually MAINPLL) when the original CPU PLL is under
+			  transition and not stable yet.
+	Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for
+	generic clock consumer properties.
+- operating-points: Please refer to Documentation/devicetree/bindings/power/opp.txt for
+		    details.
+- proc-supply: Regulator for Vproc of CPU cluster.
+
+Optional properties:
+- sram-supply: Regulator for Vsram of CPU cluster. When present, the cpufreq driver
+	       needs to do "voltage trace" to step by step scale up/down Vproc and
+	       Vsram to fit SoC specific needs. When absent, the voltage scaling
+	       flow is handled by hardware, hence no software "voltage trace" is
+	       needed.
+- #cooling-cells:
+- cooling-min-level:
+- cooling-max-level:
+	Please refer to Documentation/devicetree/bindings/thermal/thermal.txt.
+
+Example:
+--------
+	cpu0: cpu@0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a53";
+		reg = <0x000>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA53SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+		operating-points = <
+			507000	859000
+			702000	908000
+			1001000	983000
+			1105000	1009000
+			1183000	1028000
+			1404000	1083000
+			1508000	1109000
+			1573000	1125000
+		>;
+		#cooling-cells = <2>;
+		cooling-min-level = <0>;
+		cooling-max-level = <7>;
+	};
+
+	cpu1: cpu@1 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a53";
+		reg = <0x001>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA53SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+		operating-points = <
+			507000	859000
+			702000	908000
+			1001000	983000
+			1105000	1009000
+			1183000	1028000
+			1404000	1083000
+			1508000	1109000
+			1573000	1125000
+		>;
+		#cooling-cells = <2>;
+		cooling-min-level = <0>;
+		cooling-max-level = <7>;
+	};
+
+	cpu2: cpu@100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x100>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA57SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+		operating-points = <
+			507000	828000
+			702000	867000
+			1001000	927000
+			1209000	968000
+			1404000	1007000
+			1612000	1049000
+			1807000	1089000
+			1989000	1125000
+		>;
+		#cooling-cells = <2>;
+		cooling-min-level = <0>;
+		cooling-max-level = <7>;
+	};
+
+	cpu3: cpu@101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x101>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA57SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+		operating-points = <
+			507000	828000
+			702000	867000
+			1001000	927000
+			1209000	968000
+			1404000	1007000
+			1612000	1049000
+			1807000	1089000
+			1989000	1125000
+		>;
+		#cooling-cells = <2>;
+		cooling-min-level = <0>;
+		cooling-max-level = <7>;
+	};
+
+	&cpu0 {
+		proc-supply = <&mt6397_vpca15_reg>;
+	};
+
+	&cpu1 {
+		proc-supply = <&mt6397_vpca15_reg>;
+	};
+
+	&cpu2 {
+		proc-supply = <&da9211_vcpu_reg>;
+		sram-supply = <&mt6397_vsramca7_reg>;
+	};
+
+	&cpu3 {
+		proc-supply = <&da9211_vcpu_reg>;
+		sram-supply = <&mt6397_vsramca7_reg>;
+	};
-- 
1.9.1


WARNING: multiple messages have this Message-ID (diff)
From: Pi-Cheng Chen <pi-cheng.chen-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: Viresh Kumar
	<viresh.kumar-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	Michael Turquette
	<mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
	Matthias Brugger
	<matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linaro-kernel-cunTk1MwBs8s++Sfvej+rw@public.gmane.org,
	linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH v5 1/2] dt-bindings: mediatek: Add MT8173 cpufreq driver binding
Date: Wed,  1 Jul 2015 10:16:44 +0800	[thread overview]
Message-ID: <1435717005-20012-2-git-send-email-pi-cheng.chen@linaro.org> (raw)
In-Reply-To: <1435717005-20012-1-git-send-email-pi-cheng.chen-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>

This patch adds device tree binding document for MT8173 cpufreq driver.

Signed-off-by: Pi-Cheng Chen <pi-cheng.chen-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Reviewed-by: Michael Turquette <mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
---
 .../devicetree/bindings/cpufreq/cpufreq-mt8173.txt | 145 +++++++++++++++++++++
 1 file changed, 145 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-mt8173.txt

diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mt8173.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-mt8173.txt
new file mode 100644
index 0000000..65701c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mt8173.txt
@@ -0,0 +1,145 @@
+
+Mediatek MT8173 cpufreq driver
+------------------------------
+
+Mediatek MT8173 cpufreq driver for CPU frequency scaling.
+
+Required properties:
+- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock names.
+- clock-names: Should contain the following:
+	"cpu"		- The multiplexer for clock input of CPU cluster.
+	"intermediate"	- A parent of "cpu" clock which is used as "intermediate" clock
+			  source (usually MAINPLL) when the original CPU PLL is under
+			  transition and not stable yet.
+	Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for
+	generic clock consumer properties.
+- operating-points: Please refer to Documentation/devicetree/bindings/power/opp.txt for
+		    details.
+- proc-supply: Regulator for Vproc of CPU cluster.
+
+Optional properties:
+- sram-supply: Regulator for Vsram of CPU cluster. When present, the cpufreq driver
+	       needs to do "voltage trace" to step by step scale up/down Vproc and
+	       Vsram to fit SoC specific needs. When absent, the voltage scaling
+	       flow is handled by hardware, hence no software "voltage trace" is
+	       needed.
+- #cooling-cells:
+- cooling-min-level:
+- cooling-max-level:
+	Please refer to Documentation/devicetree/bindings/thermal/thermal.txt.
+
+Example:
+--------
+	cpu0: cpu@0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a53";
+		reg = <0x000>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA53SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+		operating-points = <
+			507000	859000
+			702000	908000
+			1001000	983000
+			1105000	1009000
+			1183000	1028000
+			1404000	1083000
+			1508000	1109000
+			1573000	1125000
+		>;
+		#cooling-cells = <2>;
+		cooling-min-level = <0>;
+		cooling-max-level = <7>;
+	};
+
+	cpu1: cpu@1 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a53";
+		reg = <0x001>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA53SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+		operating-points = <
+			507000	859000
+			702000	908000
+			1001000	983000
+			1105000	1009000
+			1183000	1028000
+			1404000	1083000
+			1508000	1109000
+			1573000	1125000
+		>;
+		#cooling-cells = <2>;
+		cooling-min-level = <0>;
+		cooling-max-level = <7>;
+	};
+
+	cpu2: cpu@100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x100>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA57SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+		operating-points = <
+			507000	828000
+			702000	867000
+			1001000	927000
+			1209000	968000
+			1404000	1007000
+			1612000	1049000
+			1807000	1089000
+			1989000	1125000
+		>;
+		#cooling-cells = <2>;
+		cooling-min-level = <0>;
+		cooling-max-level = <7>;
+	};
+
+	cpu3: cpu@101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x101>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA57SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+		operating-points = <
+			507000	828000
+			702000	867000
+			1001000	927000
+			1209000	968000
+			1404000	1007000
+			1612000	1049000
+			1807000	1089000
+			1989000	1125000
+		>;
+		#cooling-cells = <2>;
+		cooling-min-level = <0>;
+		cooling-max-level = <7>;
+	};
+
+	&cpu0 {
+		proc-supply = <&mt6397_vpca15_reg>;
+	};
+
+	&cpu1 {
+		proc-supply = <&mt6397_vpca15_reg>;
+	};
+
+	&cpu2 {
+		proc-supply = <&da9211_vcpu_reg>;
+		sram-supply = <&mt6397_vsramca7_reg>;
+	};
+
+	&cpu3 {
+		proc-supply = <&da9211_vcpu_reg>;
+		sram-supply = <&mt6397_vsramca7_reg>;
+	};
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: pi-cheng.chen@linaro.org (Pi-Cheng Chen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 1/2] dt-bindings: mediatek: Add MT8173 cpufreq driver binding
Date: Wed,  1 Jul 2015 10:16:44 +0800	[thread overview]
Message-ID: <1435717005-20012-2-git-send-email-pi-cheng.chen@linaro.org> (raw)
In-Reply-To: <1435717005-20012-1-git-send-email-pi-cheng.chen@linaro.org>

This patch adds device tree binding document for MT8173 cpufreq driver.

Signed-off-by: Pi-Cheng Chen <pi-cheng.chen@linaro.org>
Reviewed-by: Michael Turquette <mturquette@baylibre.com>
---
 .../devicetree/bindings/cpufreq/cpufreq-mt8173.txt | 145 +++++++++++++++++++++
 1 file changed, 145 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-mt8173.txt

diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mt8173.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-mt8173.txt
new file mode 100644
index 0000000..65701c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mt8173.txt
@@ -0,0 +1,145 @@
+
+Mediatek MT8173 cpufreq driver
+------------------------------
+
+Mediatek MT8173 cpufreq driver for CPU frequency scaling.
+
+Required properties:
+- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock names.
+- clock-names: Should contain the following:
+	"cpu"		- The multiplexer for clock input of CPU cluster.
+	"intermediate"	- A parent of "cpu" clock which is used as "intermediate" clock
+			  source (usually MAINPLL) when the original CPU PLL is under
+			  transition and not stable yet.
+	Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for
+	generic clock consumer properties.
+- operating-points: Please refer to Documentation/devicetree/bindings/power/opp.txt for
+		    details.
+- proc-supply: Regulator for Vproc of CPU cluster.
+
+Optional properties:
+- sram-supply: Regulator for Vsram of CPU cluster. When present, the cpufreq driver
+	       needs to do "voltage trace" to step by step scale up/down Vproc and
+	       Vsram to fit SoC specific needs. When absent, the voltage scaling
+	       flow is handled by hardware, hence no software "voltage trace" is
+	       needed.
+- #cooling-cells:
+- cooling-min-level:
+- cooling-max-level:
+	Please refer to Documentation/devicetree/bindings/thermal/thermal.txt.
+
+Example:
+--------
+	cpu0: cpu at 0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a53";
+		reg = <0x000>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA53SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+		operating-points = <
+			507000	859000
+			702000	908000
+			1001000	983000
+			1105000	1009000
+			1183000	1028000
+			1404000	1083000
+			1508000	1109000
+			1573000	1125000
+		>;
+		#cooling-cells = <2>;
+		cooling-min-level = <0>;
+		cooling-max-level = <7>;
+	};
+
+	cpu1: cpu at 1 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a53";
+		reg = <0x001>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA53SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+		operating-points = <
+			507000	859000
+			702000	908000
+			1001000	983000
+			1105000	1009000
+			1183000	1028000
+			1404000	1083000
+			1508000	1109000
+			1573000	1125000
+		>;
+		#cooling-cells = <2>;
+		cooling-min-level = <0>;
+		cooling-max-level = <7>;
+	};
+
+	cpu2: cpu at 100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x100>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA57SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+		operating-points = <
+			507000	828000
+			702000	867000
+			1001000	927000
+			1209000	968000
+			1404000	1007000
+			1612000	1049000
+			1807000	1089000
+			1989000	1125000
+		>;
+		#cooling-cells = <2>;
+		cooling-min-level = <0>;
+		cooling-max-level = <7>;
+	};
+
+	cpu3: cpu at 101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x101>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA57SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+		operating-points = <
+			507000	828000
+			702000	867000
+			1001000	927000
+			1209000	968000
+			1404000	1007000
+			1612000	1049000
+			1807000	1089000
+			1989000	1125000
+		>;
+		#cooling-cells = <2>;
+		cooling-min-level = <0>;
+		cooling-max-level = <7>;
+	};
+
+	&cpu0 {
+		proc-supply = <&mt6397_vpca15_reg>;
+	};
+
+	&cpu1 {
+		proc-supply = <&mt6397_vpca15_reg>;
+	};
+
+	&cpu2 {
+		proc-supply = <&da9211_vcpu_reg>;
+		sram-supply = <&mt6397_vsramca7_reg>;
+	};
+
+	&cpu3 {
+		proc-supply = <&da9211_vcpu_reg>;
+		sram-supply = <&mt6397_vsramca7_reg>;
+	};
-- 
1.9.1

  reply	other threads:[~2015-07-01  2:20 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-01  2:16 [PATCH v5 0/2] Add Mediatek MT8173 cpufreq driver Pi-Cheng Chen
2015-07-01  2:16 ` Pi-Cheng Chen
2015-07-01  2:16 ` Pi-Cheng Chen
2015-07-01  2:16 ` Pi-Cheng Chen [this message]
2015-07-01  2:16   ` [PATCH v5 1/2] dt-bindings: mediatek: Add MT8173 cpufreq driver binding Pi-Cheng Chen
2015-07-01  2:16   ` Pi-Cheng Chen
2015-07-08 11:19   ` Viresh Kumar
2015-07-08 11:19     ` Viresh Kumar
2015-07-09 15:04     ` Michael Turquette
2015-07-09 15:04       ` Michael Turquette
2015-07-01  2:16 ` [PATCH v5 2/2] cpufreq: mediatek: Add MT8173 cpufreq driver Pi-Cheng Chen
2015-07-01  2:16   ` Pi-Cheng Chen
2015-07-01  2:16   ` Pi-Cheng Chen
2015-07-01 21:24   ` Alexey Klimov
2015-07-01 21:24     ` Alexey Klimov
2015-07-02  1:31     ` Pi-Cheng Chen
2015-07-02  1:31       ` Pi-Cheng Chen
2015-07-02  1:31       ` Pi-Cheng Chen
2015-07-08 11:34   ` Viresh Kumar
2015-07-08 11:34     ` Viresh Kumar
2015-07-09  1:55     ` Pi-Cheng Chen
2015-07-09  1:55       ` Pi-Cheng Chen
2015-07-09  1:55       ` Pi-Cheng Chen
2015-07-09  5:17       ` Viresh Kumar
2015-07-09  5:17         ` Viresh Kumar
2015-07-09  5:17         ` Viresh Kumar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1435717005-20012-2-git-send-email-pi-cheng.chen@linaro.org \
    --to=pi-cheng.chen@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linaro-kernel@lists.linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=matthias.bgg@gmail.com \
    --cc=mturquette@baylibre.com \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.