All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Michel Dänzer" <michel@daenzer.net>
To: dri-devel@lists.freedesktop.org
Subject: [PATCH 2/3] drm/radeon: unpin cursor BOs on suspend and pin them again on resume
Date: Tue,  7 Jul 2015 16:27:29 +0900	[thread overview]
Message-ID: <1436254050-4104-2-git-send-email-michel@daenzer.net> (raw)
In-Reply-To: <1436254050-4104-1-git-send-email-michel@daenzer.net>

From: Grigori Goronzy <greg@chown.ath.cx>

Everything is evicted from VRAM before suspend, so we need to make
sure all BOs are unpinned and re-pinned after resume. Fixes broken
mouse cursor after resume introduced by commit b9729b17.

[Michel Dänzer: Add pinning BOs on resume]

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=100541
Cc: stable@vger.kernel.org
Signed-off-by: Grigori Goronzy <greg@chown.ath.cx>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
---
 drivers/gpu/drm/radeon/radeon_device.c | 36 ++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index 12a18c8..5a075a9 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -1593,6 +1593,20 @@ int radeon_suspend_kms(struct drm_device *dev, bool suspend, bool fbcon)
 		drm_helper_connector_dpms(connector, DRM_MODE_DPMS_OFF);
 	}
 
+	/* unpin cursors */
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+
+		if (radeon_crtc->cursor_bo) {
+			struct radeon_bo *robj = gem_to_radeon_bo(radeon_crtc->cursor_bo);
+			r = radeon_bo_reserve(robj, false);
+			if (r == 0) {
+				radeon_bo_unpin(robj);
+				radeon_bo_unreserve(robj);
+			}
+		}
+	}
+
 	/* unpin the front buffers */
 	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
 		struct radeon_framebuffer *rfb = to_radeon_framebuffer(crtc->primary->fb);
@@ -1660,6 +1674,7 @@ int radeon_resume_kms(struct drm_device *dev, bool resume, bool fbcon)
 {
 	struct drm_connector *connector;
 	struct radeon_device *rdev = dev->dev_private;
+	struct drm_crtc *crtc;
 	int r;
 
 	if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
@@ -1699,6 +1714,27 @@ int radeon_resume_kms(struct drm_device *dev, bool resume, bool fbcon)
 
 	radeon_restore_bios_scratch_regs(rdev);
 
+	/* pin cursors */
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+
+		if (radeon_crtc->cursor_bo) {
+			struct radeon_bo *robj = gem_to_radeon_bo(radeon_crtc->cursor_bo);
+			r = radeon_bo_reserve(robj, false);
+			if (r == 0) {
+				/* Only 27 bit offset for legacy cursor */
+				r = radeon_bo_pin_restricted(robj,
+							     RADEON_GEM_DOMAIN_VRAM,
+							     ASIC_IS_AVIVO(rdev) ?
+							     0 : 1 << 27,
+							     &radeon_crtc->cursor_addr);
+				if (r != 0)
+					DRM_ERROR("Failed to pin cursor BO (%d)\n", r);
+				radeon_bo_unreserve(robj);
+			}
+		}
+	}
+
 	/* init dig PHYs, disp eng pll */
 	if (rdev->is_atom_bios) {
 		radeon_atom_encoder_init(rdev);
-- 
2.1.4

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2015-07-07  7:27 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-07  7:27 [PATCH 1/3] drm/radeon: Clean up reference counting and pinning of the cursor BOs Michel Dänzer
2015-07-07  7:27 ` Michel Dänzer [this message]
2015-07-07 10:12   ` [PATCH 2/3] drm/radeon: unpin cursor BOs on suspend and pin them again on resume Christian König
2015-07-07  7:27 ` [PATCH 3/3] drm/radeon: Fold radeon_set_cursor() into radeon_show_cursor() Michel Dänzer
2015-07-08 20:33 ` [PATCH 1/3] drm/radeon: Clean up reference counting and pinning of the cursor BOs Grigori Goronzy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1436254050-4104-2-git-send-email-michel@daenzer.net \
    --to=michel@daenzer.net \
    --cc=dri-devel@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.