All of lore.kernel.org
 help / color / mirror / Atom feed
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH v3 04/20] drm/i915: Allow fuzzy matching in pipe_config_compare, v2.
Date: Mon, 13 Jul 2015 16:30:17 +0200	[thread overview]
Message-ID: <1436797833-11493-5-git-send-email-maarten.lankhorst@linux.intel.com> (raw)
In-Reply-To: <1436797833-11493-1-git-send-email-maarten.lankhorst@linux.intel.com>

Instead of doing ad-hoc checks we already have a way of checking
if the state is compatible or not. Use this to force a modeset.

Only during modesets, or with PIPE_CONFIG_QUIRK_INHERITED_MODE
we should check if a full modeset is really needed.

Fastboot will allow the adjust parameter to ignore some stuff
too, and it will fix up differences in state that are ignored
by the compare function.

Changes since v1:
- Increase the value of the lowest m/n to prevent truncation.
- Dump pipe config when fastboot's used, without a modeset.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
---
 drivers/gpu/drm/i915/intel_display.c | 218 +++++++++++++++++++++++++----------
 1 file changed, 157 insertions(+), 61 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 6eed925f3300..c3a3d1087777 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -12290,19 +12290,6 @@ encoder_retry:
 	DRM_DEBUG_KMS("plane bpp: %i, pipe bpp: %i, dithering: %i\n",
 		      base_bpp, pipe_config->pipe_bpp, pipe_config->dither);
 
-	/* Check if we need to force a modeset */
-	if (pipe_config->has_audio !=
-	    to_intel_crtc_state(crtc->state)->has_audio) {
-		pipe_config->base.mode_changed = true;
-		ret = drm_atomic_add_affected_planes(state, crtc);
-	}
-
-	/*
-	 * Note we have an issue here with infoframes: current code
-	 * only updates them on the full mode set path per hw
-	 * requirements.  So here we should be checking for any
-	 * required changes and forcing a mode set.
-	 */
 fail:
 	return ret;
 }
@@ -12406,27 +12393,133 @@ static bool intel_fuzzy_clock_check(int clock1, int clock2)
 			    base.head) \
 		if (mask & (1 <<(intel_crtc)->pipe))
 
+
+static bool
+intel_compare_m_n(unsigned int m, unsigned int n,
+		  unsigned int m2, unsigned int n2,
+		  bool exact)
+{
+	if (m == m2 && n == n2)
+		return true;
+
+	if (exact || !m || !n || !m2 || !n2)
+		return false;
+
+	BUILD_BUG_ON(DATA_LINK_M_N_MASK > INT_MAX);
+
+	if (m > m2) {
+		while (m > m2) {
+			m2 <<= 1;
+			n2 <<= 1;
+		}
+	} else if (m < m2) {
+		while (m < m2) {
+			m <<= 1;
+			n <<= 1;
+		}
+	}
+
+	return m == m2 && n == n2;
+}
+
+static bool
+intel_compare_link_m_n(const struct intel_link_m_n *m_n,
+		       struct intel_link_m_n *m2_n2,
+		       bool adjust)
+{
+	if (m_n->tu == m2_n2->tu &&
+	    intel_compare_m_n(m_n->gmch_m, m_n->gmch_n,
+			      m2_n2->gmch_m, m2_n2->gmch_n, !adjust) &&
+	    intel_compare_m_n(m_n->link_m, m_n->link_n,
+			      m2_n2->link_m, m2_n2->link_n, !adjust)) {
+		if (adjust)
+			*m2_n2 = *m_n;
+
+		return true;
+	}
+
+	return false;
+}
+
 static bool
 intel_pipe_config_compare(struct drm_device *dev,
 			  struct intel_crtc_state *current_config,
-			  struct intel_crtc_state *pipe_config)
+			  struct intel_crtc_state *pipe_config,
+			  bool adjust)
 {
+	bool ret = true;
+
+#define INTEL_ERR_OR_DBG_KMS(fmt, ...) \
+	do { \
+		if (!adjust) \
+			DRM_ERROR(fmt, ##__VA_ARGS__); \
+		else \
+			DRM_DEBUG_KMS(fmt, ##__VA_ARGS__); \
+	} while (0)
+
 #define PIPE_CONF_CHECK_X(name)	\
 	if (current_config->name != pipe_config->name) { \
-		DRM_ERROR("mismatch in " #name " " \
+		INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
 			  "(expected 0x%08x, found 0x%08x)\n", \
 			  current_config->name, \
 			  pipe_config->name); \
-		return false; \
+		ret = false; \
 	}
 
 #define PIPE_CONF_CHECK_I(name)	\
 	if (current_config->name != pipe_config->name) { \
-		DRM_ERROR("mismatch in " #name " " \
+		INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
 			  "(expected %i, found %i)\n", \
 			  current_config->name, \
 			  pipe_config->name); \
-		return false; \
+		ret = false; \
+	}
+
+#define PIPE_CONF_CHECK_M_N(name) \
+	if (!intel_compare_link_m_n(&current_config->name, \
+				    &pipe_config->name,\
+				    adjust)) { \
+		INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
+			  "(expected tu %i gmch %i/%i link %i/%i, " \
+			  "found tu %i, gmch %i/%i link %i/%i)\n", \
+			  current_config->name.tu, \
+			  current_config->name.gmch_m, \
+			  current_config->name.gmch_n, \
+			  current_config->name.link_m, \
+			  current_config->name.link_n, \
+			  pipe_config->name.tu, \
+			  pipe_config->name.gmch_m, \
+			  pipe_config->name.gmch_n, \
+			  pipe_config->name.link_m, \
+			  pipe_config->name.link_n); \
+		ret = false; \
+	}
+
+#define PIPE_CONF_CHECK_M_N_ALT(name, alt_name) \
+	if (!intel_compare_link_m_n(&current_config->name, \
+				    &pipe_config->name, adjust) && \
+	    !intel_compare_link_m_n(&current_config->alt_name, \
+				    &pipe_config->name, adjust)) { \
+		INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
+			  "(expected tu %i gmch %i/%i link %i/%i, " \
+			  "or tu %i gmch %i/%i link %i/%i, " \
+			  "found tu %i, gmch %i/%i link %i/%i)\n", \
+			  current_config->name.tu, \
+			  current_config->name.gmch_m, \
+			  current_config->name.gmch_n, \
+			  current_config->name.link_m, \
+			  current_config->name.link_n, \
+			  current_config->alt_name.tu, \
+			  current_config->alt_name.gmch_m, \
+			  current_config->alt_name.gmch_n, \
+			  current_config->alt_name.link_m, \
+			  current_config->alt_name.link_n, \
+			  pipe_config->name.tu, \
+			  pipe_config->name.gmch_m, \
+			  pipe_config->name.gmch_n, \
+			  pipe_config->name.link_m, \
+			  pipe_config->name.link_n); \
+		ret = false; \
 	}
 
 /* This is required for BDW+ where there is only one set of registers for
@@ -12437,30 +12530,30 @@ intel_pipe_config_compare(struct drm_device *dev,
 #define PIPE_CONF_CHECK_I_ALT(name, alt_name) \
 	if ((current_config->name != pipe_config->name) && \
 		(current_config->alt_name != pipe_config->name)) { \
-			DRM_ERROR("mismatch in " #name " " \
+			INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
 				  "(expected %i or %i, found %i)\n", \
 				  current_config->name, \
 				  current_config->alt_name, \
 				  pipe_config->name); \
-			return false; \
+			ret = false; \
 	}
 
 #define PIPE_CONF_CHECK_FLAGS(name, mask)	\
 	if ((current_config->name ^ pipe_config->name) & (mask)) { \
-		DRM_ERROR("mismatch in " #name "(" #mask ") "	   \
+		INTEL_ERR_OR_DBG_KMS("mismatch in " #name "(" #mask ") " \
 			  "(expected %i, found %i)\n", \
 			  current_config->name & (mask), \
 			  pipe_config->name & (mask)); \
-		return false; \
+		ret = false; \
 	}
 
 #define PIPE_CONF_CHECK_CLOCK_FUZZY(name) \
 	if (!intel_fuzzy_clock_check(current_config->name, pipe_config->name)) { \
-		DRM_ERROR("mismatch in " #name " " \
+		INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
 			  "(expected %i, found %i)\n", \
 			  current_config->name, \
 			  pipe_config->name); \
-		return false; \
+		ret = false; \
 	}
 
 #define PIPE_CONF_QUIRK(quirk)	\
@@ -12470,35 +12563,18 @@ intel_pipe_config_compare(struct drm_device *dev,
 
 	PIPE_CONF_CHECK_I(has_pch_encoder);
 	PIPE_CONF_CHECK_I(fdi_lanes);
-	PIPE_CONF_CHECK_I(fdi_m_n.gmch_m);
-	PIPE_CONF_CHECK_I(fdi_m_n.gmch_n);
-	PIPE_CONF_CHECK_I(fdi_m_n.link_m);
-	PIPE_CONF_CHECK_I(fdi_m_n.link_n);
-	PIPE_CONF_CHECK_I(fdi_m_n.tu);
+	PIPE_CONF_CHECK_M_N(fdi_m_n);
 
 	PIPE_CONF_CHECK_I(has_dp_encoder);
 
 	if (INTEL_INFO(dev)->gen < 8) {
-		PIPE_CONF_CHECK_I(dp_m_n.gmch_m);
-		PIPE_CONF_CHECK_I(dp_m_n.gmch_n);
-		PIPE_CONF_CHECK_I(dp_m_n.link_m);
-		PIPE_CONF_CHECK_I(dp_m_n.link_n);
-		PIPE_CONF_CHECK_I(dp_m_n.tu);
-
-		if (current_config->has_drrs) {
-			PIPE_CONF_CHECK_I(dp_m2_n2.gmch_m);
-			PIPE_CONF_CHECK_I(dp_m2_n2.gmch_n);
-			PIPE_CONF_CHECK_I(dp_m2_n2.link_m);
-			PIPE_CONF_CHECK_I(dp_m2_n2.link_n);
-			PIPE_CONF_CHECK_I(dp_m2_n2.tu);
-		}
-	} else {
-		PIPE_CONF_CHECK_I_ALT(dp_m_n.gmch_m, dp_m2_n2.gmch_m);
-		PIPE_CONF_CHECK_I_ALT(dp_m_n.gmch_n, dp_m2_n2.gmch_n);
-		PIPE_CONF_CHECK_I_ALT(dp_m_n.link_m, dp_m2_n2.link_m);
-		PIPE_CONF_CHECK_I_ALT(dp_m_n.link_n, dp_m2_n2.link_n);
-		PIPE_CONF_CHECK_I_ALT(dp_m_n.tu, dp_m2_n2.tu);
-	}
+		PIPE_CONF_CHECK_M_N(dp_m_n);
+
+		PIPE_CONF_CHECK_I(has_drrs);
+		if (current_config->has_drrs)
+			PIPE_CONF_CHECK_M_N(dp_m2_n2);
+	} else
+		PIPE_CONF_CHECK_M_N_ALT(dp_m_n, dp_m2_n2);
 
 	PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hdisplay);
 	PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_htotal);
@@ -12594,8 +12670,9 @@ intel_pipe_config_compare(struct drm_device *dev,
 #undef PIPE_CONF_CHECK_FLAGS
 #undef PIPE_CONF_CHECK_CLOCK_FUZZY
 #undef PIPE_CONF_QUIRK
+#undef INTEL_ERR_OR_DBG_KMS
 
-	return true;
+	return ret;
 }
 
 static void check_wm_state(struct drm_device *dev)
@@ -12787,8 +12864,11 @@ check_crtc_state(struct drm_device *dev)
 		     "transitional active state does not match atomic hw state "
 		     "(expected %i, found %i)\n", crtc->base.state->active, crtc->active);
 
-		if (active &&
-		    !intel_pipe_config_compare(dev, crtc->config, &pipe_config)) {
+		if (!active)
+			continue;
+
+		if (!intel_pipe_config_compare(dev, crtc->config,
+					       &pipe_config, false)) {
 			I915_STATE_WARN(1, "pipe state doesn't match!\n");
 			intel_dump_pipe_config(crtc, &pipe_config,
 					       "[hw state]");
@@ -13089,14 +13169,17 @@ intel_modeset_compute_config(struct drm_atomic_state *state)
 		return ret;
 
 	for_each_crtc_in_state(state, crtc, crtc_state, i) {
+		struct intel_crtc_state *pipe_config =
+			to_intel_crtc_state(crtc_state);
+		bool modeset, recalc;
+
 		if (!crtc_state->enable) {
 			if (needs_modeset(crtc_state))
 				any_ms = true;
 			continue;
 		}
 
-		if (to_intel_crtc_state(crtc_state)->quirks &
-		    PIPE_CONFIG_QUIRK_INITIAL_PLANES) {
+		if (pipe_config->quirks & PIPE_CONFIG_QUIRK_INITIAL_PLANES) {
 			ret = drm_atomic_add_affected_planes(state, crtc);
 			if (ret)
 				return ret;
@@ -13109,23 +13192,36 @@ intel_modeset_compute_config(struct drm_atomic_state *state)
 			 */
 		}
 
-		if (!needs_modeset(crtc_state)) {
+		modeset = needs_modeset(crtc_state);
+		recalc = pipe_config->quirks & PIPE_CONFIG_QUIRK_INHERITED_MODE;
+
+		if (!modeset && !recalc)
+			continue;
+
+		if (recalc) {
 			ret = drm_atomic_add_affected_connectors(state, crtc);
 			if (ret)
 				return ret;
 		}
 
-		ret = intel_modeset_pipe_config(crtc,
-					to_intel_crtc_state(crtc_state));
+		ret = intel_modeset_pipe_config(crtc, pipe_config);
 		if (ret)
 			return ret;
 
-		if (needs_modeset(crtc_state))
-			any_ms = true;
+		if (recalc && !intel_pipe_config_compare(state->dev,
+					to_intel_crtc_state(crtc->state),
+					pipe_config, true)) {
+			modeset = crtc_state->mode_changed = true;
+
+			ret = drm_atomic_add_affected_planes(state, crtc);
+			if (ret)
+				return ret;
+		}
 
+		any_ms = modeset;
 		intel_dump_pipe_config(to_intel_crtc(crtc),
-				       to_intel_crtc_state(crtc_state),
-				       "[modeset]");
+				       pipe_config,
+				       modeset ? "[modeset]" : "[fastboot]");
 	}
 
 	if (any_ms) {
-- 
2.1.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2015-07-13 14:30 UTC|newest]

Thread overview: 60+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-13 14:30 [PATCH v3 00/20] Convert to atomic, part 4 Maarten Lankhorst
2015-07-13 14:30 ` [PATCH v3 01/20] drm/i915: Only update state on crtc's that are part of the atomic state Maarten Lankhorst
2015-07-13 14:30 ` [PATCH v3 02/20] drm/i915: Do not update pfit state when toggling crtc enabled Maarten Lankhorst
2015-07-13 14:30 ` [PATCH v3 03/20] drm/i915: Do not use plane_config in intel_fbdev.c Maarten Lankhorst
2015-07-13 14:30 ` Maarten Lankhorst [this message]
2015-07-14  9:49   ` [PATCH v3 04/20] drm/i915: Allow fuzzy matching in pipe_config_compare, v2 Daniel Vetter
2015-07-14 10:17     ` [PATCH v3.1 " Maarten Lankhorst
2015-07-13 14:30 ` [PATCH v3 05/20] drm/i915: Update missing properties in find_initial_plane_obj Maarten Lankhorst
2015-07-13 14:30 ` [PATCH v3 06/20] drm/i915: Remove plane_config from struct intel_crtc Maarten Lankhorst
2015-07-13 16:30   ` Daniel Stone
2015-07-14  8:27     ` Maarten Lankhorst
2015-07-14 11:23       ` Daniel Stone
2015-07-14 10:33     ` [PATCH v3.1 06/20] drm/i915: Remove plane_config from struct intel_crtc, v2 Maarten Lankhorst
2015-07-14 12:02       ` Daniel Vetter
2015-07-13 14:30 ` [PATCH v3 07/20] drm/i915: Rework plane readout Maarten Lankhorst
2015-07-14  9:53   ` Daniel Vetter
2015-07-14 10:30     ` Maarten Lankhorst
2015-07-14 10:35       ` Daniel Vetter
2015-07-13 14:30 ` [PATCH v3 08/20] drm/i915: fill in more mode members Maarten Lankhorst
2015-07-14  9:50   ` Daniel Vetter
2015-07-14 10:31     ` Maarten Lankhorst
2015-07-14 11:21     ` Daniel Stone
2015-07-14 11:40       ` Maarten Lankhorst
2015-07-14 12:12         ` [PATCH v3.1 " Maarten Lankhorst
2015-07-14 12:12           ` Daniel Stone
2015-07-14 12:42         ` [PATCH v3 " Daniel Vetter
2015-07-13 14:30 ` [PATCH v3 09/20] drm/i915: Fill in more crtc state, v3 Maarten Lankhorst
2015-07-14  9:49   ` Daniel Vetter
2015-07-14 11:42     ` Maarten Lankhorst
2015-07-14 11:42     ` [PATCH 1/3] drm/i915: Fix reference leak in intel_modeset_readout_hw_state Maarten Lankhorst
2015-07-14 11:47       ` Daniel Stone
2015-07-14 11:45     ` [PATCH 2/3] drm/i915: Zero the mode in intel_sanitize_crtc when force disabling Maarten Lankhorst
2015-07-14 11:47       ` Daniel Stone
2015-07-14 11:46     ` [PATCH 3/3] drm/i915: Calculate vblank timestamping constants before enabling vblank Maarten Lankhorst
2015-07-14 11:47       ` Daniel Stone
2015-07-13 14:30 ` [PATCH v3 10/20] drm/i915: Set csc coefficients in intel_sanitize_crtc Maarten Lankhorst
2015-07-13 16:21   ` Daniel Stone
2015-07-14  8:50     ` Maarten Lankhorst
2015-07-14  9:55       ` Daniel Vetter
2015-07-14 10:12         ` Maarten Lankhorst
2015-07-13 14:30 ` [PATCH v3 11/20] drm/i915: Readout initial hw mode Maarten Lankhorst
2015-07-14 13:58   ` [PATCH v3.1 " Maarten Lankhorst
2015-07-13 14:30 ` [PATCH v3 12/20] drm/i915: Convert resume to atomic Maarten Lankhorst
2015-07-13 14:30 ` [PATCH v3 13/20] drm/i915: Get rid of unused transitional members Maarten Lankhorst
2015-07-13 14:30 ` [PATCH v3 14/20] drm/i915: Update power domains on readout Maarten Lankhorst
2015-07-13 14:30 ` [PATCH v3 15/20] drm/i915: Always reset in intel_crtc_restore_mode Maarten Lankhorst
2015-07-14  9:56   ` Daniel Vetter
2015-07-14 14:19     ` [PATCH v3.1 15/20] drm/i915: Always force a modeset in intel_crtc_restore_mode, v2 Maarten Lankhorst
2015-07-13 14:30 ` [PATCH v3 16/20] drm/i915: Make intel_display_suspend atomic, try 2 Maarten Lankhorst
2015-07-14 16:14   ` Daniel Vetter
2015-07-15  4:05     ` Maarten Lankhorst
2015-07-13 14:30 ` [PATCH v3 17/20] drm/i915: Use full atomic modeset Maarten Lankhorst
2015-07-13 14:30 ` [PATCH v3 18/20] drm/i915: Call plane update functions directly from intel_atomic_commit Maarten Lankhorst
2015-07-13 14:30 ` [PATCH v3 19/20] drm/i915: always disable irqs in intel_pipe_update_start Maarten Lankhorst
2015-07-13 17:16   ` Daniel Stone
2015-07-14  7:57     ` Maarten Lankhorst
2015-07-15  6:38     ` Maarten Lankhorst
2015-07-13 14:30 ` [PATCH v3 20/20] drm/i915: Remove use of runtime pm in atomic commit functions Maarten Lankhorst
2015-07-13 17:35 ` [PATCH v3 00/20] Convert to atomic, part 4 Daniel Stone
2015-07-16 17:43 ` Daniel Stone

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1436797833-11493-5-git-send-email-maarten.lankhorst@linux.intel.com \
    --to=maarten.lankhorst@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.