[PATCH 2/2] ARM: OMAP2+: Remove legacy booting support for Pandora

[Tony Lindgren <tony@atomide.com>]

We've been moving all omap2+ based systems to boot in device tree only
mode for a few years now. Only omap3 has legacy booting support
remaining. Most omap3 boards already have related arch/arm/boot/*.dts*
files for booting with device tree.

This board has support for device tree based booting, and we've been
printing warnings about the legacy booting being deprecated for a
few merge cycles now. Let's attempt to remove the legacy booting
for it.

The reason for removing the legacy booting support now rather than
later is we can simply revert this patch if necessary if we run
into some unexpected issues that are not trivial to fix for the
device tree based booting.

Cc: Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Makefile             |   1 -
 arch/arm/mach-omap2/board-omap3pandora.c | 633 -------------------------------
 2 files changed, 634 deletions(-)
 delete mode 100644 arch/arm/mach-omap2/board-omap3pandora.c

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 9e4b17a..9bb78a8 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -243,7 +243,6 @@ obj-$(CONFIG_SOC_OMAP2420)		+= msdi.o
 # Specific board support
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o pdata-quirks.o
 obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o
-obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o
 obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o sdram-nokia.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51-peripherals.o
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
deleted file mode 100644
index 969e100..0000000
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ /dev/null
@@ -1,633 +0,0 @@
-/*
- * board-omap3pandora.c (Pandora Handheld Console)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <linux/spi/spi.h>
-#include <linux/regulator/machine.h>
-#include <linux/i2c/twl.h>
-#include <linux/omap-gpmc.h>
-#include <linux/wl12xx.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/card.h>
-#include <linux/regulator/fixed.h>
-#include <linux/usb/phy.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-#include <linux/platform_data/mtd-nand-omap2.h>
-
-#include "mux.h"
-#include "sdram-micron-mt46h32m32lf-6.h"
-#include "hsmmc.h"
-#include "common-board-devices.h"
-
-#define PANDORA_WIFI_IRQ_GPIO		21
-#define PANDORA_WIFI_NRESET_GPIO	23
-#define OMAP3_PANDORA_TS_GPIO		94
-
-static struct mtd_partition omap3pandora_nand_partitions[] = {
-	{
-		.name           = "xloader",
-		.offset         = 0,
-		.size           = 4 * NAND_BLOCK_SIZE,
-		.mask_flags     = MTD_WRITEABLE
-	}, {
-		.name           = "uboot",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 15 * NAND_BLOCK_SIZE,
-	}, {
-		.name           = "uboot-env",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 1 * NAND_BLOCK_SIZE,
-	}, {
-		.name           = "boot",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 80 * NAND_BLOCK_SIZE,
-	}, {
-		.name           = "rootfs",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = MTDPART_SIZ_FULL,
-	},
-};
-
-static struct omap_nand_platform_data pandora_nand_data = {
-	.cs		= 0,
-	.devsize	= NAND_BUSWIDTH_16,
-	.xfer_type	= NAND_OMAP_PREFETCH_DMA,
-	.parts		= omap3pandora_nand_partitions,
-	.nr_parts	= ARRAY_SIZE(omap3pandora_nand_partitions),
-};
-
-static struct gpio_led pandora_gpio_leds[] = {
-	{
-		.name			= "pandora::sd1",
-		.default_trigger	= "mmc0",
-		.gpio			= 128,
-	}, {
-		.name			= "pandora::sd2",
-		.default_trigger	= "mmc1",
-		.gpio			= 129,
-	}, {
-		.name			= "pandora::bluetooth",
-		.gpio			= 158,
-	}, {
-		.name			= "pandora::wifi",
-		.gpio			= 159,
-	},
-};
-
-static struct gpio_led_platform_data pandora_gpio_led_data = {
-	.leds		= pandora_gpio_leds,
-	.num_leds	= ARRAY_SIZE(pandora_gpio_leds),
-};
-
-static struct platform_device pandora_leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &pandora_gpio_led_data,
-	},
-};
-
-static struct platform_device pandora_backlight = {
-	.name	= "pandora-backlight",
-	.id	= -1,
-};
-
-#define GPIO_BUTTON(gpio_num, ev_type, ev_code, act_low, descr)	\
-{								\
-	.gpio		= gpio_num,				\
-	.type		= ev_type,				\
-	.code		= ev_code,				\
-	.active_low	= act_low,				\
-	.debounce_interval = 4,					\
-	.desc		= "btn " descr,				\
-}
-
-#define GPIO_BUTTON_LOW(gpio_num, event_code, description)	\
-	GPIO_BUTTON(gpio_num, EV_KEY, event_code, 1, description)
-
-static struct gpio_keys_button pandora_gpio_keys[] = {
-	GPIO_BUTTON_LOW(110,	KEY_UP,		"up"),
-	GPIO_BUTTON_LOW(103,	KEY_DOWN,	"down"),
-	GPIO_BUTTON_LOW(96,	KEY_LEFT,	"left"),
-	GPIO_BUTTON_LOW(98,	KEY_RIGHT,	"right"),
-	GPIO_BUTTON_LOW(109,	KEY_PAGEUP,	"game 1"),
-	GPIO_BUTTON_LOW(111,	KEY_END,	"game 2"),
-	GPIO_BUTTON_LOW(106,	KEY_PAGEDOWN,	"game 3"),
-	GPIO_BUTTON_LOW(101,	KEY_HOME,	"game 4"),
-	GPIO_BUTTON_LOW(102,	KEY_RIGHTSHIFT,	"l"),
-	GPIO_BUTTON_LOW(97,	KEY_KPPLUS,	"l2"),
-	GPIO_BUTTON_LOW(105,	KEY_RIGHTCTRL,	"r"),
-	GPIO_BUTTON_LOW(107,	KEY_KPMINUS,	"r2"),
-	GPIO_BUTTON_LOW(104,	KEY_LEFTCTRL,	"ctrl"),
-	GPIO_BUTTON_LOW(99,	KEY_MENU,	"menu"),
-	GPIO_BUTTON_LOW(176,	KEY_COFFEE,	"hold"),
-	GPIO_BUTTON(100, EV_KEY, KEY_LEFTALT, 0, "alt"),
-	GPIO_BUTTON(108, EV_SW, SW_LID, 1, "lid"),
-};
-
-static struct gpio_keys_platform_data pandora_gpio_key_info = {
-	.buttons	= pandora_gpio_keys,
-	.nbuttons	= ARRAY_SIZE(pandora_gpio_keys),
-};
-
-static struct platform_device pandora_keys_gpio = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &pandora_gpio_key_info,
-	},
-};
-
-static const uint32_t board_keymap[] = {
-	/* row, col, code */
-	KEY(0, 0, KEY_9),
-	KEY(0, 1, KEY_8),
-	KEY(0, 2, KEY_I),
-	KEY(0, 3, KEY_J),
-	KEY(0, 4, KEY_N),
-	KEY(0, 5, KEY_M),
-	KEY(1, 0, KEY_0),
-	KEY(1, 1, KEY_7),
-	KEY(1, 2, KEY_U),
-	KEY(1, 3, KEY_H),
-	KEY(1, 4, KEY_B),
-	KEY(1, 5, KEY_SPACE),
-	KEY(2, 0, KEY_BACKSPACE),
-	KEY(2, 1, KEY_6),
-	KEY(2, 2, KEY_Y),
-	KEY(2, 3, KEY_G),
-	KEY(2, 4, KEY_V),
-	KEY(2, 5, KEY_FN),
-	KEY(3, 0, KEY_O),
-	KEY(3, 1, KEY_5),
-	KEY(3, 2, KEY_T),
-	KEY(3, 3, KEY_F),
-	KEY(3, 4, KEY_C),
-	KEY(4, 0, KEY_P),
-	KEY(4, 1, KEY_4),
-	KEY(4, 2, KEY_R),
-	KEY(4, 3, KEY_D),
-	KEY(4, 4, KEY_X),
-	KEY(5, 0, KEY_K),
-	KEY(5, 1, KEY_3),
-	KEY(5, 2, KEY_E),
-	KEY(5, 3, KEY_S),
-	KEY(5, 4, KEY_Z),
-	KEY(6, 0, KEY_L),
-	KEY(6, 1, KEY_2),
-	KEY(6, 2, KEY_W),
-	KEY(6, 3, KEY_A),
-	KEY(6, 4, KEY_DOT),
-	KEY(7, 0, KEY_ENTER),
-	KEY(7, 1, KEY_1),
-	KEY(7, 2, KEY_Q),
-	KEY(7, 3, KEY_LEFTSHIFT),
-	KEY(7, 4, KEY_COMMA),
-};
-
-static struct matrix_keymap_data board_map_data = {
-	.keymap			= board_keymap,
-	.keymap_size		= ARRAY_SIZE(board_keymap),
-};
-
-static struct twl4030_keypad_data pandora_kp_data = {
-	.keymap_data	= &board_map_data,
-	.rows		= 8,
-	.cols		= 6,
-	.rep		= 1,
-};
-
-static struct connector_atv_platform_data pandora_tv_pdata = {
-	.name = "tv",
-	.source = "venc.0",
-	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
-	.invert_polarity = false,
-};
-
-static struct platform_device pandora_tv_connector_device = {
-	.name                   = "connector-analog-tv",
-	.id                     = 0,
-	.dev.platform_data      = &pandora_tv_pdata,
-};
-
-static struct omap_dss_board_info pandora_dss_data = {
-	.default_display_name = "lcd",
-};
-
-static void pandora_wl1251_init_card(struct mmc_card *card)
-{
-	/*
-	 * We have TI wl1251 attached to MMC3. Pass this information to
-	 * SDIO core because it can't be probed by normal methods.
-	 */
-	if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) {
-		card->quirks |= MMC_QUIRK_NONSTD_SDIO;
-		card->cccr.wide_bus = 1;
-		card->cis.vendor = 0x104c;
-		card->cis.device = 0x9066;
-		card->cis.blksize = 512;
-		card->cis.max_dtr = 20000000;
-	}
-}
-
-static struct omap2_hsmmc_info omap3pandora_mmc[] = {
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= 126,
-		.ext_clock	= 0,
-		.deferred	= true,
-	},
-	{
-		.mmc		= 2,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= 127,
-		.ext_clock	= 1,
-		.transceiver	= true,
-		.deferred	= true,
-	},
-	{
-		.mmc		= 3,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-		.init_card	= pandora_wl1251_init_card,
-	},
-	{}	/* Terminator */
-};
-
-static int omap3pandora_twl_gpio_setup(struct device *dev,
-		unsigned gpio, unsigned ngpio)
-{
-	int ret, gpio_32khz;
-
-	/* gpio + {0,1} is "mmc{0,1}_cd" (input/IRQ) */
-	omap3pandora_mmc[0].gpio_cd = gpio + 0;
-	omap3pandora_mmc[1].gpio_cd = gpio + 1;
-	omap_hsmmc_late_init(omap3pandora_mmc);
-
-	/* gpio + 13 drives 32kHz buffer for wifi module */
-	gpio_32khz = gpio + 13;
-	ret = gpio_request_one(gpio_32khz, GPIOF_OUT_INIT_HIGH, "wifi 32kHz");
-	if (ret < 0) {
-		pr_err("Cannot get GPIO line %d, ret=%d\n", gpio_32khz, ret);
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
-static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
-	.setup		= omap3pandora_twl_gpio_setup,
-};
-
-static struct regulator_consumer_supply pandora_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply pandora_vmmc2_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1")
-};
-
-static struct regulator_consumer_supply pandora_vmmc3_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"),
-};
-
-static struct regulator_consumer_supply pandora_vdds_supplies[] = {
-	REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
-};
-
-static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = {
-	REGULATOR_SUPPLY("vcc", "spi1.1"),
-};
-
-static struct regulator_consumer_supply pandora_usb_phy_supply[] = {
-	REGULATOR_SUPPLY("vcc", "usb_phy_gen_xceiv.2"),	/* hsusb port 2 */
-};
-
-/* ads7846 on SPI and 2 nub controllers on I2C */
-static struct regulator_consumer_supply pandora_vaux4_supplies[] = {
-	REGULATOR_SUPPLY("vcc", "spi1.0"),
-	REGULATOR_SUPPLY("vcc", "3-0066"),
-	REGULATOR_SUPPLY("vcc", "3-0067"),
-};
-
-static struct regulator_consumer_supply pandora_adac_supply[] = {
-	REGULATOR_SUPPLY("vcc", "soc-audio"),
-};
-
-/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
-static struct regulator_init_data pandora_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(pandora_vmmc1_supply),
-	.consumer_supplies	= pandora_vmmc1_supply,
-};
-
-/* VMMC2 for MMC2 pins CMD, CLK, DAT0..DAT3 (max 100 mA) */
-static struct regulator_init_data pandora_vmmc2 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(pandora_vmmc2_supply),
-	.consumer_supplies	= pandora_vmmc2_supply,
-};
-
-/* VAUX1 for LCD */
-static struct regulator_init_data pandora_vaux1 = {
-	.constraints = {
-		.min_uV			= 3000000,
-		.max_uV			= 3000000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(pandora_vcc_lcd_supply),
-	.consumer_supplies	= pandora_vcc_lcd_supply,
-};
-
-/* VAUX2 for USB host PHY */
-static struct regulator_init_data pandora_vaux2 = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(pandora_usb_phy_supply),
-	.consumer_supplies	= pandora_usb_phy_supply,
-};
-
-/* VAUX4 for ads7846 and nubs */
-static struct regulator_init_data pandora_vaux4 = {
-	.constraints = {
-		.min_uV			= 2800000,
-		.max_uV			= 2800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(pandora_vaux4_supplies),
-	.consumer_supplies	= pandora_vaux4_supplies,
-};
-
-/* VSIM for audio DAC */
-static struct regulator_init_data pandora_vsim = {
-	.constraints = {
-		.min_uV			= 2800000,
-		.max_uV			= 2800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(pandora_adac_supply),
-	.consumer_supplies	= pandora_adac_supply,
-};
-
-/* Fixed regulator internal to Wifi module */
-static struct regulator_init_data pandora_vmmc3 = {
-	.constraints = {
-		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(pandora_vmmc3_supply),
-	.consumer_supplies	= pandora_vmmc3_supply,
-};
-
-static struct fixed_voltage_config pandora_vwlan = {
-	.supply_name		= "vwlan",
-	.microvolts		= 1800000, /* 1.8V */
-	.gpio			= PANDORA_WIFI_NRESET_GPIO,
-	.startup_delay		= 50000, /* 50ms */
-	.enable_high		= 1,
-	.enabled_at_boot	= 0,
-	.init_data		= &pandora_vmmc3,
-};
-
-static struct platform_device pandora_vwlan_device = {
-	.name		= "reg-fixed-voltage",
-	.id		= 1,
-	.dev = {
-		.platform_data = &pandora_vwlan,
-	},
-};
-
-static struct twl4030_bci_platform_data pandora_bci_data;
-
-static struct twl4030_power_data pandora_power_data = {
-	.use_poweroff	= true,
-};
-
-static struct twl4030_platform_data omap3pandora_twldata = {
-	.gpio		= &omap3pandora_gpio_data,
-	.vmmc1		= &pandora_vmmc1,
-	.vmmc2		= &pandora_vmmc2,
-	.vaux1		= &pandora_vaux1,
-	.vaux2		= &pandora_vaux2,
-	.vaux4		= &pandora_vaux4,
-	.vsim		= &pandora_vsim,
-	.keypad		= &pandora_kp_data,
-	.bci		= &pandora_bci_data,
-	.power		= &pandora_power_data,
-};
-
-static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = {
-	{
-		I2C_BOARD_INFO("bq27500", 0x55),
-		.flags = I2C_CLIENT_WAKE,
-	},
-};
-
-static int __init omap3pandora_i2c_init(void)
-{
-	omap3_pmic_get_config(&omap3pandora_twldata,
-			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
-			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
-
-	omap3pandora_twldata.vdac->constraints.apply_uV = true;
-
-	omap3pandora_twldata.vpll2->constraints.apply_uV = true;
-	omap3pandora_twldata.vpll2->num_consumer_supplies =
-					ARRAY_SIZE(pandora_vdds_supplies);
-	omap3pandora_twldata.vpll2->consumer_supplies = pandora_vdds_supplies;
-
-	omap3_pmic_init("tps65950", &omap3pandora_twldata);
-	/* i2c2 pins are not connected */
-	omap_register_i2c_bus(3, 100, omap3pandora_i2c3_boardinfo,
-			ARRAY_SIZE(omap3pandora_i2c3_boardinfo));
-	return 0;
-}
-
-static struct panel_tpo_td043mtea1_platform_data pandora_lcd_pdata = {
-	.name                   = "lcd",
-	.source                 = "dpi.0",
-
-	.data_lines		= 24,
-	.nreset_gpio		= 157,
-};
-
-static struct spi_board_info omap3pandora_spi_board_info[] __initdata = {
-	{
-		.modalias		= "panel-tpo-td043mtea1",
-		.bus_num		= 1,
-		.chip_select		= 1,
-		.max_speed_hz		= 375000,
-		.platform_data		= &pandora_lcd_pdata,
-	}
-};
-
-static void __init pandora_wl1251_init(void)
-{
-	struct wl1251_platform_data pandora_wl1251_pdata;
-	int ret;
-
-	memset(&pandora_wl1251_pdata, 0, sizeof(pandora_wl1251_pdata));
-
-	pandora_wl1251_pdata.power_gpio = -1;
-
-	ret = gpio_request_one(PANDORA_WIFI_IRQ_GPIO, GPIOF_IN, "wl1251 irq");
-	if (ret < 0)
-		goto fail;
-
-	pandora_wl1251_pdata.irq = gpio_to_irq(PANDORA_WIFI_IRQ_GPIO);
-	if (pandora_wl1251_pdata.irq < 0)
-		goto fail_irq;
-
-	pandora_wl1251_pdata.use_eeprom = true;
-	ret = wl1251_set_platform_data(&pandora_wl1251_pdata);
-	if (ret < 0)
-		goto fail_irq;
-
-	return;
-
-fail_irq:
-	gpio_free(PANDORA_WIFI_IRQ_GPIO);
-fail:
-	printk(KERN_ERR "wl1251 board initialisation failed\n");
-}
-
-static struct usbhs_phy_data phy_data[] __initdata = {
-	{
-		.port = 2,
-		.reset_gpio = 16,
-		.vcc_gpio = -EINVAL,
-	},
-};
-
-static struct platform_device *omap3pandora_devices[] __initdata = {
-	&pandora_leds_gpio,
-	&pandora_keys_gpio,
-	&pandora_vwlan_device,
-	&pandora_backlight,
-	&pandora_tv_connector_device,
-};
-
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static void __init omap3pandora_init(void)
-{
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	omap_hsmmc_init(omap3pandora_mmc);
-	omap3pandora_i2c_init();
-	pandora_wl1251_init();
-	platform_add_devices(omap3pandora_devices,
-			ARRAY_SIZE(omap3pandora_devices));
-	omap_display_init(&pandora_dss_data);
-	omap_serial_init();
-	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
-				  mt46h32m32lf6_sdrc_params);
-	spi_register_board_info(omap3pandora_spi_board_info,
-			ARRAY_SIZE(omap3pandora_spi_board_info));
-	omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL);
-
-	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
-	usbhs_init(&usbhs_bdata);
-
-	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
-	usb_musb_init(NULL);
-	gpmc_nand_init(&pandora_nand_data, NULL);
-
-	/* Ensure SDRC pins are mux'd for self-refresh */
-	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
-	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
-}
-
-MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap35xx_init_early,
-	.init_irq	= omap3_init_irq,
-	.init_machine	= omap3pandora_init,
-	.init_late	= omap35xx_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
-- 
2.1.4