From: Henry Chen <henryc.chen@mediatek.com>
To: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Mark Rutland <mark.rutland@arm.com>,
Sascha Hauer <kernel@pengutronix.de>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>, <henryc.chen@mediatek.com>,
<eddie.huang@mediatek.com>, <srv_heupstream@mediatek.com>
Subject: [PATCH 1/2] dt-bindings: Add document for MT6311 regulator
Date: Mon, 20 Jul 2015 15:36:32 +0800 [thread overview]
Message-ID: <1437377793-31558-2-git-send-email-henryc.chen@mediatek.com> (raw)
In-Reply-To: <1437377793-31558-1-git-send-email-henryc.chen@mediatek.com>
This patch adds a list of supported regulator names to the devicetree
binding documentation for Mediatek MT6311 PMIC.
Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
---
.../bindings/regulator/mt6311-regulator.txt | 34 ++++++++++++++++++++++
1 file changed, 34 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/mt6311-regulator.txt
diff --git a/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt
new file mode 100644
index 0000000..c607029
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt
@@ -0,0 +1,34 @@
+Mediatek MT6311 Regulator Driver
+
+Required properties:
+- compatible: "mediatek,mt6311-regulator"
+- mt6311regulator: List of regulators provided by this controller. It is named
+ to VDVFS and VBIASN.
+ The definition for each of these nodes is defined using the standard binding
+ for regulators at Documentation/devicetree/bindings/regulator/regulator.txt.
+
+The valid names for regulators are:
+BUCK:
+ VDVFS
+LDO:
+ VBIASN
+
+Example:
+ pmic: mt6311@6B {
+ compatible = "mediatek,mt6311-regulator";
+ reg = <0x6B>;
+
+ regulators {
+ mt6311_vcpu_reg: VDVFS {
+ regulator-name = "VDVFS";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-ramp-delay = <10000>;
+ };
+ mt6311_ldo_reg: VBIASN {
+ regulator-name = "VBIASN";
+ regulator-min-microvolt = <200000>;
+ regulator-max-microvolt = <800000>;
+ };
+ };
+ };
--
1.8.1.1.dirty
WARNING: multiple messages have this Message-ID (diff)
From: Henry Chen <henryc.chen@mediatek.com>
To: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Mark Rutland <mark.rutland@arm.com>,
Sascha Hauer <kernel@pengutronix.de>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, henryc.chen@mediatek.com,
eddie.huang@mediatek.com, srv_heupstream@mediatek.com
Subject: [PATCH 1/2] dt-bindings: Add document for MT6311 regulator
Date: Mon, 20 Jul 2015 15:36:32 +0800 [thread overview]
Message-ID: <1437377793-31558-2-git-send-email-henryc.chen@mediatek.com> (raw)
In-Reply-To: <1437377793-31558-1-git-send-email-henryc.chen@mediatek.com>
This patch adds a list of supported regulator names to the devicetree
binding documentation for Mediatek MT6311 PMIC.
Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
---
.../bindings/regulator/mt6311-regulator.txt | 34 ++++++++++++++++++++++
1 file changed, 34 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/mt6311-regulator.txt
diff --git a/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt
new file mode 100644
index 0000000..c607029
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt
@@ -0,0 +1,34 @@
+Mediatek MT6311 Regulator Driver
+
+Required properties:
+- compatible: "mediatek,mt6311-regulator"
+- mt6311regulator: List of regulators provided by this controller. It is named
+ to VDVFS and VBIASN.
+ The definition for each of these nodes is defined using the standard binding
+ for regulators at Documentation/devicetree/bindings/regulator/regulator.txt.
+
+The valid names for regulators are:
+BUCK:
+ VDVFS
+LDO:
+ VBIASN
+
+Example:
+ pmic: mt6311@6B {
+ compatible = "mediatek,mt6311-regulator";
+ reg = <0x6B>;
+
+ regulators {
+ mt6311_vcpu_reg: VDVFS {
+ regulator-name = "VDVFS";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-ramp-delay = <10000>;
+ };
+ mt6311_ldo_reg: VBIASN {
+ regulator-name = "VBIASN";
+ regulator-min-microvolt = <200000>;
+ regulator-max-microvolt = <800000>;
+ };
+ };
+ };
--
1.8.1.1.dirty
WARNING: multiple messages have this Message-ID (diff)
From: henryc.chen@mediatek.com (Henry Chen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] dt-bindings: Add document for MT6311 regulator
Date: Mon, 20 Jul 2015 15:36:32 +0800 [thread overview]
Message-ID: <1437377793-31558-2-git-send-email-henryc.chen@mediatek.com> (raw)
In-Reply-To: <1437377793-31558-1-git-send-email-henryc.chen@mediatek.com>
This patch adds a list of supported regulator names to the devicetree
binding documentation for Mediatek MT6311 PMIC.
Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
---
.../bindings/regulator/mt6311-regulator.txt | 34 ++++++++++++++++++++++
1 file changed, 34 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/mt6311-regulator.txt
diff --git a/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt
new file mode 100644
index 0000000..c607029
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt
@@ -0,0 +1,34 @@
+Mediatek MT6311 Regulator Driver
+
+Required properties:
+- compatible: "mediatek,mt6311-regulator"
+- mt6311regulator: List of regulators provided by this controller. It is named
+ to VDVFS and VBIASN.
+ The definition for each of these nodes is defined using the standard binding
+ for regulators at Documentation/devicetree/bindings/regulator/regulator.txt.
+
+The valid names for regulators are:
+BUCK:
+ VDVFS
+LDO:
+ VBIASN
+
+Example:
+ pmic: mt6311 at 6B {
+ compatible = "mediatek,mt6311-regulator";
+ reg = <0x6B>;
+
+ regulators {
+ mt6311_vcpu_reg: VDVFS {
+ regulator-name = "VDVFS";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-ramp-delay = <10000>;
+ };
+ mt6311_ldo_reg: VBIASN {
+ regulator-name = "VBIASN";
+ regulator-min-microvolt = <200000>;
+ regulator-max-microvolt = <800000>;
+ };
+ };
+ };
--
1.8.1.1.dirty
next prev parent reply other threads:[~2015-07-20 7:37 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-20 7:36 regulator: MT6311: Add support for MT6311 regulator Henry Chen
2015-07-20 7:36 ` Henry Chen
2015-07-20 7:36 ` Henry Chen
2015-07-20 7:36 ` Henry Chen [this message]
2015-07-20 7:36 ` [PATCH 1/2] dt-bindings: Add document " Henry Chen
2015-07-20 7:36 ` Henry Chen
2015-07-20 17:28 ` Mark Brown
2015-07-20 17:28 ` Mark Brown
2015-07-21 9:46 ` Henry Chen
2015-07-21 9:46 ` Henry Chen
2015-07-21 9:46 ` Henry Chen
2015-07-20 7:36 ` [PATCH 2/2] regulator: MT6311: Add support " Henry Chen
2015-07-20 7:36 ` Henry Chen
2015-07-20 7:36 ` Henry Chen
2015-07-20 17:31 ` Mark Brown
2015-07-20 17:31 ` Mark Brown
2015-07-21 9:52 ` Henry Chen
2015-07-21 9:52 ` Henry Chen
2015-07-21 9:52 ` Henry Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1437377793-31558-2-git-send-email-henryc.chen@mediatek.com \
--to=henryc.chen@mediatek.com \
--cc=broonie@kernel.org \
--cc=eddie.huang@mediatek.com \
--cc=kernel@pengutronix.de \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=srv_heupstream@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.