All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
To: Mathias Nyman <mathias.nyman@intel.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Felipe Balbi <balbi@ti.com>,
	Chunfeng Yun <chunfeng.yun@mediatek.com>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	Roger Quadros <rogerq@ti.com>, <linux-usb@vger.kernel.org>,
	<linux-mediatek@lists.infradead.org>,
	John Crispin <blogic@openwrt.org>,
	Daniel Kurtz <djkurtz@chromium.org>
Subject: [PATCH v3 5/5] arm64: dts: mediatek: add xHCI & usb phy for mt8173
Date: Wed, 22 Jul 2015 22:05:45 +0800	[thread overview]
Message-ID: <1437573945-31586-6-git-send-email-chunfeng.yun@mediatek.com> (raw)
In-Reply-To: <1437573945-31586-1-git-send-email-chunfeng.yun@mediatek.com>

add xHCI and phy drivers for MT8173-EVB

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 15 ++++++++++++++
 arch/arm64/boot/dts/mediatek/mt8173.dtsi    | 31 +++++++++++++++++++++++++++++
 2 files changed, 46 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index f433c21..202b2b9 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -13,6 +13,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "mt8173.dtsi"
 
 / {
@@ -32,6 +33,15 @@
 	};
 
 	chosen { };
+
+	usb_p1_vbus: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 130 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 };
 
 &pwrap {
@@ -211,3 +221,8 @@
 &uart0 {
 	status = "okay";
 };
+
+&usb {
+	vusb33-supply = <&mt6397_vusb_reg>;
+	vbus-supply = <&usb_p1_vbus>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 0696f8f..aa1ecc7 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -14,6 +14,7 @@
 #include <dt-bindings/clock/mt8173-clk.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/mt8173-power.h>
 #include <dt-bindings/reset-controller/mt8173-resets.h>
 #include "mt8173-pinfunc.h"
 
@@ -393,6 +394,36 @@
 			#size-cells = <0>;
 			status = "disabled";
 		};
+
+		usb: usb30@11270000 {
+			compatible = "mediatek,mt8173-xhci";
+			reg = <0 0x11270000 0 0x4000>,
+			      <0 0x11280000 0 0x0800>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+			clocks = <&topckgen CLK_TOP_USB30_SEL>,
+				 <&pericfg CLK_PERI_USB0>,
+				 <&pericfg CLK_PERI_USB1>;
+			clock-names = "sys_mac",
+				      "wakeup_deb_p0",
+				      "wakeup_deb_p1";
+			phys = <&u3phy 0>, <&u3phy 1>;
+			phy-names = "phy-0", "phy-1";
+			usb3-lpm-capable;
+			mediatek,usb-wakeup = <&pericfg>;
+			mediatek,wakeup-src = <1>;
+			mediatek,u2port-num = <2>;
+			status = "okay";
+		};
+
+		u3phy: usb-phy@11290000 {
+			compatible = "mediatek,mt8173-u3phy";
+			reg = <0 0x11290000 0 0x3000>;
+			clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
+			clock-names = "u3phya_ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
 	};
 };
 
-- 
1.8.1.1.dirty


WARNING: multiple messages have this Message-ID (diff)
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
To: Mathias Nyman <mathias.nyman@intel.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Felipe Balbi <balbi@ti.com>,
	Chunfeng Yun <chunfeng.yun@mediatek.com>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Roger Quadros <rogerq@ti.com>,
	linux-usb@vger.kernel.org, linux-mediatek@lists.infradead.org,
	John Crispin <blogic@openwrt.org>,
	Daniel Kurtz <djkurtz@chromium.org>
Subject: [PATCH v3 5/5] arm64: dts: mediatek: add xHCI & usb phy for mt8173
Date: Wed, 22 Jul 2015 22:05:45 +0800	[thread overview]
Message-ID: <1437573945-31586-6-git-send-email-chunfeng.yun@mediatek.com> (raw)
In-Reply-To: <1437573945-31586-1-git-send-email-chunfeng.yun@mediatek.com>

add xHCI and phy drivers for MT8173-EVB

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 15 ++++++++++++++
 arch/arm64/boot/dts/mediatek/mt8173.dtsi    | 31 +++++++++++++++++++++++++++++
 2 files changed, 46 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index f433c21..202b2b9 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -13,6 +13,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "mt8173.dtsi"
 
 / {
@@ -32,6 +33,15 @@
 	};
 
 	chosen { };
+
+	usb_p1_vbus: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 130 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 };
 
 &pwrap {
@@ -211,3 +221,8 @@
 &uart0 {
 	status = "okay";
 };
+
+&usb {
+	vusb33-supply = <&mt6397_vusb_reg>;
+	vbus-supply = <&usb_p1_vbus>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 0696f8f..aa1ecc7 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -14,6 +14,7 @@
 #include <dt-bindings/clock/mt8173-clk.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/mt8173-power.h>
 #include <dt-bindings/reset-controller/mt8173-resets.h>
 #include "mt8173-pinfunc.h"
 
@@ -393,6 +394,36 @@
 			#size-cells = <0>;
 			status = "disabled";
 		};
+
+		usb: usb30@11270000 {
+			compatible = "mediatek,mt8173-xhci";
+			reg = <0 0x11270000 0 0x4000>,
+			      <0 0x11280000 0 0x0800>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+			clocks = <&topckgen CLK_TOP_USB30_SEL>,
+				 <&pericfg CLK_PERI_USB0>,
+				 <&pericfg CLK_PERI_USB1>;
+			clock-names = "sys_mac",
+				      "wakeup_deb_p0",
+				      "wakeup_deb_p1";
+			phys = <&u3phy 0>, <&u3phy 1>;
+			phy-names = "phy-0", "phy-1";
+			usb3-lpm-capable;
+			mediatek,usb-wakeup = <&pericfg>;
+			mediatek,wakeup-src = <1>;
+			mediatek,u2port-num = <2>;
+			status = "okay";
+		};
+
+		u3phy: usb-phy@11290000 {
+			compatible = "mediatek,mt8173-u3phy";
+			reg = <0 0x11290000 0 0x3000>;
+			clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
+			clock-names = "u3phya_ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
 	};
 };
 
-- 
1.8.1.1.dirty

WARNING: multiple messages have this Message-ID (diff)
From: chunfeng.yun@mediatek.com (Chunfeng Yun)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 5/5] arm64: dts: mediatek: add xHCI & usb phy for mt8173
Date: Wed, 22 Jul 2015 22:05:45 +0800	[thread overview]
Message-ID: <1437573945-31586-6-git-send-email-chunfeng.yun@mediatek.com> (raw)
In-Reply-To: <1437573945-31586-1-git-send-email-chunfeng.yun@mediatek.com>

add xHCI and phy drivers for MT8173-EVB

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 15 ++++++++++++++
 arch/arm64/boot/dts/mediatek/mt8173.dtsi    | 31 +++++++++++++++++++++++++++++
 2 files changed, 46 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index f433c21..202b2b9 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -13,6 +13,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "mt8173.dtsi"
 
 / {
@@ -32,6 +33,15 @@
 	};
 
 	chosen { };
+
+	usb_p1_vbus: fixedregulator at 0 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 130 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 };
 
 &pwrap {
@@ -211,3 +221,8 @@
 &uart0 {
 	status = "okay";
 };
+
+&usb {
+	vusb33-supply = <&mt6397_vusb_reg>;
+	vbus-supply = <&usb_p1_vbus>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 0696f8f..aa1ecc7 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -14,6 +14,7 @@
 #include <dt-bindings/clock/mt8173-clk.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/mt8173-power.h>
 #include <dt-bindings/reset-controller/mt8173-resets.h>
 #include "mt8173-pinfunc.h"
 
@@ -393,6 +394,36 @@
 			#size-cells = <0>;
 			status = "disabled";
 		};
+
+		usb: usb30 at 11270000 {
+			compatible = "mediatek,mt8173-xhci";
+			reg = <0 0x11270000 0 0x4000>,
+			      <0 0x11280000 0 0x0800>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+			clocks = <&topckgen CLK_TOP_USB30_SEL>,
+				 <&pericfg CLK_PERI_USB0>,
+				 <&pericfg CLK_PERI_USB1>;
+			clock-names = "sys_mac",
+				      "wakeup_deb_p0",
+				      "wakeup_deb_p1";
+			phys = <&u3phy 0>, <&u3phy 1>;
+			phy-names = "phy-0", "phy-1";
+			usb3-lpm-capable;
+			mediatek,usb-wakeup = <&pericfg>;
+			mediatek,wakeup-src = <1>;
+			mediatek,u2port-num = <2>;
+			status = "okay";
+		};
+
+		u3phy: usb-phy at 11290000 {
+			compatible = "mediatek,mt8173-u3phy";
+			reg = <0 0x11290000 0 0x3000>;
+			clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
+			clock-names = "u3phya_ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
 	};
 };
 
-- 
1.8.1.1.dirty

  parent reply	other threads:[~2015-07-22 14:07 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-22 14:05 Chunfeng Yun
2015-07-22 14:05 ` No subject Chunfeng Yun
2015-07-22 14:05 ` (unknown), Chunfeng Yun
2015-07-22 14:05 ` [PATCH v3 1/5] dt-bindings: Add usb3.0 phy binding for MT65xx SoCs Chunfeng Yun
2015-07-22 14:05   ` Chunfeng Yun
2015-07-22 14:05   ` Chunfeng Yun
2015-07-22 14:05 ` [PATCH v3 2/5] dt-bindings: Add a binding for Mediatek xHCI host controller Chunfeng Yun
2015-07-22 14:05   ` Chunfeng Yun
2015-07-22 14:05   ` Chunfeng Yun
2015-07-22 14:22   ` Mark Rutland
2015-07-22 14:22     ` Mark Rutland
2015-07-22 14:22     ` Mark Rutland
2015-07-26  3:45     ` chunfeng yun
2015-07-26  3:45       ` chunfeng yun
2015-07-26  3:45       ` chunfeng yun
2015-07-31 13:37       ` Mark Rutland
2015-07-31 13:37         ` Mark Rutland
2015-07-31 13:37         ` Mark Rutland
2015-08-01  3:42         ` chunfeng yun
2015-08-01  3:42           ` chunfeng yun
2015-08-01  3:42           ` chunfeng yun
2015-07-22 14:05 ` [PATCH v3 3/5] usb: phy: add usb3.0 phy driver for mt65xx SoCs Chunfeng Yun
2015-07-22 14:05   ` Chunfeng Yun
2015-07-22 14:05   ` Chunfeng Yun
2015-07-22 14:21   ` Felipe Balbi
2015-07-22 14:21     ` Felipe Balbi
2015-07-22 14:21     ` Felipe Balbi
2015-07-26  2:51     ` chunfeng yun
2015-07-26  2:51       ` chunfeng yun
2015-07-26  2:51       ` chunfeng yun
2015-07-28  5:47       ` Kishon Vijay Abraham I
2015-07-28  5:47         ` Kishon Vijay Abraham I
2015-07-28  5:47         ` Kishon Vijay Abraham I
2015-07-31 12:25         ` chunfeng yun
2015-07-31 12:25           ` chunfeng yun
2015-07-31 12:25           ` chunfeng yun
2015-07-31 14:18           ` Kishon Vijay Abraham I
2015-07-31 14:18             ` Kishon Vijay Abraham I
2015-07-31 14:18             ` Kishon Vijay Abraham I
2015-08-01  2:42             ` chunfeng yun
2015-08-01  2:42               ` chunfeng yun
2015-08-01  2:42               ` chunfeng yun
2015-07-27 13:58   ` Ricky Liang
2015-07-27 13:58     ` Ricky Liang
2015-07-27 13:58     ` Ricky Liang
2015-07-31 12:32     ` chunfeng yun
2015-07-31 12:32       ` chunfeng yun
2015-07-31 12:32       ` chunfeng yun
2015-07-22 14:05 ` [PATCH v3 4/5] xhci: mediatek: support MTK xHCI host controller Chunfeng Yun
2015-07-22 14:05   ` Chunfeng Yun
2015-07-22 14:05   ` Chunfeng Yun
2015-07-22 14:05 ` Chunfeng Yun [this message]
2015-07-22 14:05   ` [PATCH v3 5/5] arm64: dts: mediatek: add xHCI & usb phy for mt8173 Chunfeng Yun
2015-07-22 14:05   ` Chunfeng Yun
2015-07-22 18:11   ` Sergei Shtylyov
2015-07-22 18:11     ` Sergei Shtylyov
2015-07-26  2:41     ` chunfeng yun
2015-07-26  2:41       ` chunfeng yun
2015-07-26  2:41       ` chunfeng yun
2015-07-23  1:18 ` [PATCH v3 0/5] Mediatek xHCI support chunfeng yun
2015-07-23  1:18   ` chunfeng yun
2015-07-23  1:18   ` chunfeng yun

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1437573945-31586-6-git-send-email-chunfeng.yun@mediatek.com \
    --to=chunfeng.yun@mediatek.com \
    --cc=balbi@ti.com \
    --cc=blogic@openwrt.org \
    --cc=devicetree@vger.kernel.org \
    --cc=djkurtz@chromium.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mathias.nyman@intel.com \
    --cc=matthias.bgg@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=rogerq@ti.com \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.