All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sudeep Holla <sudeep.holla@arm.com>
To: linux-kernel@vger.kernel.org
Cc: Sudeep Holla <sudeep.holla@arm.com>,
	Liviu Dudau <liviu.dudau@arm.com>,
	Punit Agrawal <punit.agrawal@arm.com>,
	"Jon Medhurst (Tixy)" <tixy@linaro.org>,
	Lorenzo Pieralisi <Lorenzo.Pieralisi@arm.com>,
	Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
	Kevin Hilman <khilman@kernel.org>,
	Viresh Kumar <viresh.kumar@linaro.org>,
	"Rafael J. Wysocki" <rjw@rjwysocki.net>,
	linux-pm@vger.kernel.org
Subject: [PATCH v5 5/8] cpufreq: arm_big_little: add SCPI interface driver
Date: Thu, 23 Jul 2015 12:10:25 +0100	[thread overview]
Message-ID: <1437649828-14540-6-git-send-email-sudeep.holla@arm.com> (raw)
In-Reply-To: <1437649828-14540-1-git-send-email-sudeep.holla@arm.com>

On some ARM based systems, a separate Cortex-M based System Control
Processor(SCP) provides the overall power, clock, reset and system
control including CPU DVFS. SCPI Message Protocol is used to
communicate with the SCPI.

This patch adds a interface driver for adding OPPs and registering
the arm_big_little cpufreq driver for such systems.

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: linux-pm@vger.kernel.org
---
 MAINTAINERS                    |   1 +
 drivers/cpufreq/Kconfig.arm    |   9 +++
 drivers/cpufreq/Makefile       |   1 +
 drivers/cpufreq/scpi-cpufreq.c | 124 +++++++++++++++++++++++++++++++++++++++++
 4 files changed, 135 insertions(+)
 create mode 100644 drivers/cpufreq/scpi-cpufreq.c

Hi Rafael,

Viresh has already ACKed, since I plan to push this as a series via arm-soc,
can you provide your ACK if the patch looks fine to you ?

Regards,
Sudeep

diff --git a/MAINTAINERS b/MAINTAINERS
index 16a7612fee4a..74e5c80c7db9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8961,6 +8961,7 @@ L:	linux-arm-kernel@lists.infradead.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/arm/arm,scpi.txt
 F:	drivers/clk/clk-scpi.c
+F:	drivers/cpufreq/scpi-cpufreq.c
 F:	drivers/firmware/arm_scpi.c
 F:	include/linux/scpi_protocol.h
 
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index cc8a71c267b8..c46b495169af 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -24,6 +24,15 @@ config ARM_VEXPRESS_SPC_CPUFREQ
           This add the CPUfreq driver support for Versatile Express
 	  big.LITTLE platforms using SPC for power management.
 
+config ARM_SCPI_CPUFREQ
+        tristate "SCPI based CPUfreq driver"
+	depends on ARM_BIG_LITTLE_CPUFREQ && ARM_SCPI_PROTOCOL
+        help
+	  This adds the CPUfreq driver support for ARM big.LITTLE platforms
+	  using SCPI protocol for CPU power management.
+
+	  This driver uses SCPI Message Protocol driver to interact with the
+	  firmware providing the CPU DVFS functionality.
 
 config ARM_EXYNOS_CPUFREQ
 	tristate "SAMSUNG EXYNOS CPUfreq Driver"
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 2169bf792db7..7e07f5535c3a 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -78,6 +78,7 @@ obj-$(CONFIG_ARM_SA1110_CPUFREQ)	+= sa1110-cpufreq.o
 obj-$(CONFIG_ARM_SPEAR_CPUFREQ)		+= spear-cpufreq.o
 obj-$(CONFIG_ARM_TEGRA_CPUFREQ)		+= tegra-cpufreq.o
 obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ)	+= vexpress-spc-cpufreq.o
+obj-$(CONFIG_ARM_SCPI_CPUFREQ)		+= scpi-cpufreq.o
 
 ##################################################################################
 # PowerPC platform drivers
diff --git a/drivers/cpufreq/scpi-cpufreq.c b/drivers/cpufreq/scpi-cpufreq.c
new file mode 100644
index 000000000000..2c3b16fd3a01
--- /dev/null
+++ b/drivers/cpufreq/scpi-cpufreq.c
@@ -0,0 +1,124 @@
+/*
+ * System Control and Power Interface (SCPI) based CPUFreq Interface driver
+ *
+ * It provides necessary ops to arm_big_little cpufreq driver.
+ *
+ * Copyright (C) 2015 ARM Ltd.
+ * Sudeep Holla <sudeep.holla@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/cpufreq.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/scpi_protocol.h>
+#include <linux/types.h>
+
+#include "arm_big_little.h"
+
+static struct scpi_ops *scpi_ops;
+
+static struct scpi_dvfs_info *scpi_get_dvfs_info(struct device *cpu_dev)
+{
+	u8 domain = topology_physical_package_id(cpu_dev->id);
+
+	if (domain < 0)
+		return ERR_PTR(-EINVAL);
+	return scpi_ops->dvfs_get_info(domain);
+}
+
+static int scpi_opp_table_ops(struct device *cpu_dev, bool remove)
+{
+	int idx, ret = 0;
+	struct scpi_opp *opp;
+	struct scpi_dvfs_info *info = scpi_get_dvfs_info(cpu_dev);
+
+	if (IS_ERR(info))
+		return PTR_ERR(info);
+
+	if (!info->opps)
+		return -EIO;
+
+	for (opp = info->opps, idx = 0; idx < info->count; idx++, opp++) {
+		if (remove)
+			dev_pm_opp_remove(cpu_dev, opp->freq);
+		else
+			ret = dev_pm_opp_add(cpu_dev, opp->freq,
+					     opp->m_volt * 1000);
+		if (ret) {
+			dev_warn(cpu_dev, "failed to add opp %uHz %umV\n",
+				 opp->freq, opp->m_volt);
+			while (idx-- > 0)
+				dev_pm_opp_remove(cpu_dev, (--opp)->freq);
+			return ret;
+		}
+	}
+	return ret;
+}
+
+static int scpi_get_transition_latency(struct device *cpu_dev)
+{
+	struct scpi_dvfs_info *info = scpi_get_dvfs_info(cpu_dev);
+
+	if (IS_ERR(info))
+		return PTR_ERR(info);
+	return info->latency;
+}
+
+static int scpi_init_opp_table(struct device *cpu_dev)
+{
+	return scpi_opp_table_ops(cpu_dev, false);
+}
+
+static void scpi_free_opp_table(struct device *cpu_dev)
+{
+	scpi_opp_table_ops(cpu_dev, true);
+}
+
+static struct cpufreq_arm_bL_ops scpi_cpufreq_ops = {
+	.name	= "scpi",
+	.get_transition_latency = scpi_get_transition_latency,
+	.init_opp_table = scpi_init_opp_table,
+	.free_opp_table = scpi_free_opp_table,
+};
+
+static int scpi_cpufreq_probe(struct platform_device *pdev)
+{
+	scpi_ops = get_scpi_ops();
+	if (!scpi_ops)
+		return -EIO;
+
+	return bL_cpufreq_register(&scpi_cpufreq_ops);
+}
+
+static int scpi_cpufreq_remove(struct platform_device *pdev)
+{
+	bL_cpufreq_unregister(&scpi_cpufreq_ops);
+	scpi_ops = NULL;
+	return 0;
+}
+
+static struct platform_driver scpi_cpufreq_platdrv = {
+	.driver = {
+		.name	= "scpi-cpufreq",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= scpi_cpufreq_probe,
+	.remove		= scpi_cpufreq_remove,
+};
+module_platform_driver(scpi_cpufreq_platdrv);
+
+MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>");
+MODULE_DESCRIPTION("ARM SCPI CPUFreq interface driver");
+MODULE_LICENSE("GPL v2");
-- 
1.9.1


  parent reply	other threads:[~2015-07-23 11:11 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-23 11:10 [PATCH v5 0/8] ARM64: juno: add SCPI mailbox protocol, clock and CPUFreq support Sudeep Holla
2015-07-23 11:10 ` [PATCH v5 1/8] Documentation: add DT binding for ARM System Control and Power Interface(SCPI) protocol Sudeep Holla
2015-07-23 11:10   ` Sudeep Holla
2015-07-28 10:22   ` Sudeep Holla
2015-07-28 10:22     ` Sudeep Holla
2015-07-31 16:00   ` Mark Rutland
2015-07-31 16:07     ` Sudeep Holla
2015-07-31 16:07       ` Sudeep Holla
2015-07-23 11:10 ` [PATCH v5 2/8] firmware: add support " Sudeep Holla
2015-07-29  8:05   ` Jassi Brar
2015-07-29  8:38     ` Sudeep Holla
2015-07-29 11:19       ` Jassi Brar
2015-07-29 12:50         ` Sudeep Holla
2015-07-30 17:56           ` Jassi Brar
2015-07-31  9:21             ` Sudeep Holla
2015-07-31  9:40             ` Sudeep Holla
2015-07-31 10:38               ` Jassi Brar
2015-07-31 10:43                 ` Sudeep Holla
2015-07-31 13:08                   ` Sudeep Holla
2015-07-31 13:45                     ` Jassi Brar
2015-08-05 10:57                       ` Sudeep Holla
2015-07-23 11:10 ` [PATCH v5 3/8] clk: add support for clocks provided by SCP(System Control Processor) Sudeep Holla
2015-07-28 10:21   ` Sudeep Holla
2015-07-29 17:37   ` Stephen Boyd
2015-07-30  9:12     ` Sudeep Holla
2015-07-31  6:26       ` Stephen Boyd
2015-07-23 11:10 ` [PATCH v5 4/8] clk: scpi: add support for cpufreq virtual device Sudeep Holla
2015-07-23 11:10 ` Sudeep Holla [this message]
2015-07-28 10:20   ` [PATCH v5 5/8] cpufreq: arm_big_little: add SCPI interface driver Sudeep Holla
2015-07-23 11:10 ` [PATCH v5 6/8] arm64: dts: add SRAM, MHU mailbox and SCPI support on Juno Sudeep Holla
2015-07-23 11:10 ` [PATCH v5 7/8] arm64: dts: add CPU topology " Sudeep Holla
2015-07-23 11:10 ` [PATCH v5 8/8] arm64: dts: add clock support for all the cpus Sudeep Holla

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1437649828-14540-6-git-send-email-sudeep.holla@arm.com \
    --to=sudeep.holla@arm.com \
    --cc=Lorenzo.Pieralisi@arm.com \
    --cc=arnd@arndb.de \
    --cc=khilman@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=liviu.dudau@arm.com \
    --cc=olof@lixom.net \
    --cc=punit.agrawal@arm.com \
    --cc=rjw@rjwysocki.net \
    --cc=tixy@linaro.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.