From: Kishon Vijay Abraham I <kishon@ti.com>
To: <bhelgaas@google.com>, <linux-omap@vger.kernel.org>,
<linux-pci@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>, <tony@atomide.com>
Cc: <robh+dt@kernel.org>, <pawel.moll@arm.com>,
<mark.rutland@arm.com>, <ijc+devicetree@hellion.org.uk>,
<galak@codeaurora.org>, <bcousson@baylibre.com>,
<linux@arm.linux.org.uk>, <kishon@ti.com>, <nsekhar@ti.com>
Subject: [PATCH 2/2] ARM: dts: am57xx-evm: Add 'gpios' property with gpio2_8
Date: Tue, 28 Jul 2015 19:09:10 +0530 [thread overview]
Message-ID: <1438090750-11604-3-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1438090750-11604-1-git-send-email-kishon@ti.com>
gpio2_8 is connected to the PCIe_RESETn line and it has to be driven low
in order to reset the PCIe cards. So added gpios property to pcie
dt node.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
arch/arm/boot/dts/am57xx-beagle-x15.dts | 5 +++++
arch/arm/boot/dts/dra7.dtsi | 2 +-
2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index a63bf78..a862a6e 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -693,3 +693,8 @@
};
};
};
+
+&pcie1 {
+ gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+};
+
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 8f1e25b..37202b4 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -211,7 +211,7 @@
#address-cells = <1>;
ranges = <0x51000000 0x51000000 0x3000
0x0 0x20000000 0x10000000>;
- pcie@51000000 {
+ pcie1: pcie@51000000 {
compatible = "ti,dra7-pcie";
reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
reg-names = "rc_dbics", "ti_conf", "config";
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: Kishon Vijay Abraham I <kishon@ti.com>
To: bhelgaas@google.com, linux-omap@vger.kernel.org,
linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, tony@atomide.com
Cc: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
bcousson@baylibre.com, linux@arm.linux.org.uk, kishon@ti.com,
nsekhar@ti.com
Subject: [PATCH 2/2] ARM: dts: am57xx-evm: Add 'gpios' property with gpio2_8
Date: Tue, 28 Jul 2015 19:09:10 +0530 [thread overview]
Message-ID: <1438090750-11604-3-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1438090750-11604-1-git-send-email-kishon@ti.com>
gpio2_8 is connected to the PCIe_RESETn line and it has to be driven low
in order to reset the PCIe cards. So added gpios property to pcie
dt node.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
arch/arm/boot/dts/am57xx-beagle-x15.dts | 5 +++++
arch/arm/boot/dts/dra7.dtsi | 2 +-
2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index a63bf78..a862a6e 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -693,3 +693,8 @@
};
};
};
+
+&pcie1 {
+ gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+};
+
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 8f1e25b..37202b4 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -211,7 +211,7 @@
#address-cells = <1>;
ranges = <0x51000000 0x51000000 0x3000
0x0 0x20000000 0x10000000>;
- pcie@51000000 {
+ pcie1: pcie@51000000 {
compatible = "ti,dra7-pcie";
reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
reg-names = "rc_dbics", "ti_conf", "config";
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: kishon@ti.com (Kishon Vijay Abraham I)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] ARM: dts: am57xx-evm: Add 'gpios' property with gpio2_8
Date: Tue, 28 Jul 2015 19:09:10 +0530 [thread overview]
Message-ID: <1438090750-11604-3-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1438090750-11604-1-git-send-email-kishon@ti.com>
gpio2_8 is connected to the PCIe_RESETn line and it has to be driven low
in order to reset the PCIe cards. So added gpios property to pcie
dt node.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
arch/arm/boot/dts/am57xx-beagle-x15.dts | 5 +++++
arch/arm/boot/dts/dra7.dtsi | 2 +-
2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index a63bf78..a862a6e 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -693,3 +693,8 @@
};
};
};
+
+&pcie1 {
+ gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+};
+
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 8f1e25b..37202b4 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -211,7 +211,7 @@
#address-cells = <1>;
ranges = <0x51000000 0x51000000 0x3000
0x0 0x20000000 0x10000000>;
- pcie at 51000000 {
+ pcie1: pcie at 51000000 {
compatible = "ti,dra7-pcie";
reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
reg-names = "rc_dbics", "ti_conf", "config";
--
1.7.9.5
next prev parent reply other threads:[~2015-07-28 13:40 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-28 13:39 [PATCH 0/2] pci: am57xx-evm: Fix PCIe card enumeration issue Kishon Vijay Abraham I
2015-07-28 13:39 ` Kishon Vijay Abraham I
2015-07-28 13:39 ` Kishon Vijay Abraham I
2015-07-28 13:39 ` [PATCH 1/2] pci: host: pci-dra7xx: Add support to make gpio drive PERST# line Kishon Vijay Abraham I
2015-07-28 13:39 ` Kishon Vijay Abraham I
2015-07-28 13:39 ` Kishon Vijay Abraham I
2015-07-28 13:39 ` Kishon Vijay Abraham I [this message]
2015-07-28 13:39 ` [PATCH 2/2] ARM: dts: am57xx-evm: Add 'gpios' property with gpio2_8 Kishon Vijay Abraham I
2015-07-28 13:39 ` Kishon Vijay Abraham I
2015-08-05 10:40 ` Tony Lindgren
2015-08-05 10:40 ` Tony Lindgren
2015-08-11 21:02 ` [PATCH 0/2] pci: am57xx-evm: Fix PCIe card enumeration issue Bjorn Helgaas
2015-08-11 21:02 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1438090750-11604-3-git-send-email-kishon@ti.com \
--to=kishon@ti.com \
--cc=bcousson@baylibre.com \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=nsekhar@ti.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.