All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: <ulf.hansson@linaro.org>, <afenkart@gmail.com>,
	<tony@atomide.com>, <linux-mmc@vger.kernel.org>,
	<linux-omap@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<nsekhar@ti.com>
Cc: <neilb@suse.de>, <kishon@ti.com>
Subject: [PATCH v3 11/15] mmc: host: omap_hsmmc: don't use ->set_power to set initial regulator state
Date: Thu, 27 Aug 2015 14:44:03 +0530	[thread overview]
Message-ID: <1440666847-12594-12-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1440666847-12594-1-git-send-email-kishon@ti.com>

If the regulator is enabled on boot (checked using regulator_is_enabled),
invoke regulator_enable() so that the usecount reflects the correct
state of the regulator and then disable the regulator so that the
initial state of the regulator is disabled. Avoid using ->set_power,
since set_power also takes care of setting the voltages which is not
needed at this point.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
---
 drivers/mmc/host/omap_hsmmc.c |   66 ++++++++++++++++++++++++++++++++++-------
 1 file changed, 56 insertions(+), 10 deletions(-)

diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index eec6975..cd4bd6d 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -409,6 +409,59 @@ err_set_voltage:
 	return ret;
 }
 
+static int omap_hsmmc_disable_boot_regulator(struct regulator *reg)
+{
+	int ret;
+
+	if (!reg)
+		return 0;
+
+	if (regulator_is_enabled(reg)) {
+		ret = regulator_enable(reg);
+		if (ret)
+			return ret;
+
+		ret = regulator_disable(reg);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int omap_hsmmc_disable_boot_regulators(struct omap_hsmmc_host *host)
+{
+	struct mmc_host *mmc = host->mmc;
+	int ret;
+
+	/*
+	 * disable regulators enabled during boot and get the usecount
+	 * right so that regulators can be enabled/disabled by checking
+	 * the return value of regulator_is_enabled
+	 */
+	ret = omap_hsmmc_disable_boot_regulator(mmc->supply.vmmc);
+	if (ret) {
+		dev_err(host->dev, "fail to disable boot enabled vmmc reg\n");
+		return ret;
+	}
+
+	ret = omap_hsmmc_disable_boot_regulator(mmc->supply.vqmmc);
+	if (ret) {
+		dev_err(host->dev,
+			"fail to disable boot enabled vmmc_aux reg\n");
+		return ret;
+	}
+
+	ret = omap_hsmmc_disable_boot_regulator(host->pbias);
+	if (ret) {
+		dev_err(host->dev,
+			"failed to disable boot enabled pbias reg\n");
+		return ret;
+	}
+
+	return 0;
+}
+
 static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
 {
 	int ocr_value = 0;
@@ -456,17 +509,10 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
 	/* For eMMC do not power off when not in sleep state */
 	if (mmc_pdata(host)->no_regulator_off_init)
 		return 0;
-	/*
-	 * To disable boot_on regulator, enable regulator
-	 * to increase usecount and then disable it.
-	 */
-	if ((mmc->supply.vmmc && regulator_is_enabled(mmc->supply.vmmc) > 0) ||
-	    (mmc->supply.vqmmc && regulator_is_enabled(mmc->supply.vqmmc))) {
-		int vdd = ffs(mmc_pdata(host)->ocr_mask) - 1;
 
-		omap_hsmmc_set_power(host->dev, 1, vdd);
-		omap_hsmmc_set_power(host->dev, 0, 0);
-	}
+	ret = omap_hsmmc_disable_boot_regulators(host);
+	if (ret)
+		return ret;
 
 	return 0;
 }
-- 
1.7.9.5


WARNING: multiple messages have this Message-ID (diff)
From: Kishon Vijay Abraham I <kishon@ti.com>
To: ulf.hansson@linaro.org, afenkart@gmail.com, tony@atomide.com,
	linux-mmc@vger.kernel.org, linux-omap@vger.kernel.org,
	linux-kernel@vger.kernel.org, nsekhar@ti.com
Cc: neilb@suse.de, kishon@ti.com
Subject: [PATCH v3 11/15] mmc: host: omap_hsmmc: don't use ->set_power to set initial regulator state
Date: Thu, 27 Aug 2015 14:44:03 +0530	[thread overview]
Message-ID: <1440666847-12594-12-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1440666847-12594-1-git-send-email-kishon@ti.com>

If the regulator is enabled on boot (checked using regulator_is_enabled),
invoke regulator_enable() so that the usecount reflects the correct
state of the regulator and then disable the regulator so that the
initial state of the regulator is disabled. Avoid using ->set_power,
since set_power also takes care of setting the voltages which is not
needed at this point.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
---
 drivers/mmc/host/omap_hsmmc.c |   66 ++++++++++++++++++++++++++++++++++-------
 1 file changed, 56 insertions(+), 10 deletions(-)

diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index eec6975..cd4bd6d 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -409,6 +409,59 @@ err_set_voltage:
 	return ret;
 }
 
+static int omap_hsmmc_disable_boot_regulator(struct regulator *reg)
+{
+	int ret;
+
+	if (!reg)
+		return 0;
+
+	if (regulator_is_enabled(reg)) {
+		ret = regulator_enable(reg);
+		if (ret)
+			return ret;
+
+		ret = regulator_disable(reg);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int omap_hsmmc_disable_boot_regulators(struct omap_hsmmc_host *host)
+{
+	struct mmc_host *mmc = host->mmc;
+	int ret;
+
+	/*
+	 * disable regulators enabled during boot and get the usecount
+	 * right so that regulators can be enabled/disabled by checking
+	 * the return value of regulator_is_enabled
+	 */
+	ret = omap_hsmmc_disable_boot_regulator(mmc->supply.vmmc);
+	if (ret) {
+		dev_err(host->dev, "fail to disable boot enabled vmmc reg\n");
+		return ret;
+	}
+
+	ret = omap_hsmmc_disable_boot_regulator(mmc->supply.vqmmc);
+	if (ret) {
+		dev_err(host->dev,
+			"fail to disable boot enabled vmmc_aux reg\n");
+		return ret;
+	}
+
+	ret = omap_hsmmc_disable_boot_regulator(host->pbias);
+	if (ret) {
+		dev_err(host->dev,
+			"failed to disable boot enabled pbias reg\n");
+		return ret;
+	}
+
+	return 0;
+}
+
 static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
 {
 	int ocr_value = 0;
@@ -456,17 +509,10 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
 	/* For eMMC do not power off when not in sleep state */
 	if (mmc_pdata(host)->no_regulator_off_init)
 		return 0;
-	/*
-	 * To disable boot_on regulator, enable regulator
-	 * to increase usecount and then disable it.
-	 */
-	if ((mmc->supply.vmmc && regulator_is_enabled(mmc->supply.vmmc) > 0) ||
-	    (mmc->supply.vqmmc && regulator_is_enabled(mmc->supply.vqmmc))) {
-		int vdd = ffs(mmc_pdata(host)->ocr_mask) - 1;
 
-		omap_hsmmc_set_power(host->dev, 1, vdd);
-		omap_hsmmc_set_power(host->dev, 0, 0);
-	}
+	ret = omap_hsmmc_disable_boot_regulators(host);
+	if (ret)
+		return ret;
 
 	return 0;
 }
-- 
1.7.9.5

  parent reply	other threads:[~2015-08-27  9:14 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-27  9:13 [PATCH v3 00/15] omap_hsmmc: regulator usage cleanup and fixes Kishon Vijay Abraham I
2015-08-27  9:13 ` Kishon Vijay Abraham I
2015-08-27  9:13 ` [PATCH v3 01/15] mmc: host: omap_hsmmc: use devm_regulator_get_optional() for vmmc Kishon Vijay Abraham I
2015-08-27  9:13   ` Kishon Vijay Abraham I
2015-08-27  9:13 ` [PATCH v3 02/15] mmc: host: omap_hsmmc: return on fatal errors from omap_hsmmc_reg_get Kishon Vijay Abraham I
2015-08-27  9:13   ` Kishon Vijay Abraham I
2015-08-28 18:07   ` Olof Johansson
2015-08-28 19:03     ` Tony Lindgren
2015-08-31  5:44       ` Kishon Vijay Abraham I
2015-08-31  5:44         ` Kishon Vijay Abraham I
2015-08-31 20:58         ` Tony Lindgren
2015-08-31 21:14           ` Tony Lindgren
2015-09-01 14:33             ` Grygorii Strashko
2015-09-01 14:33               ` Grygorii Strashko
2015-09-01 14:50               ` Tony Lindgren
2015-09-01 14:54                 ` Grygorii Strashko
2015-09-01 14:54                   ` Grygorii Strashko
2015-09-01 15:03                   ` Tony Lindgren
2015-09-10 16:59                     ` Kevin Hilman
2015-09-10 20:45                       ` Tony Lindgren
2015-08-27  9:13 ` [PATCH v3 03/15] mmc: host: omap_hsmmc: cleanup omap_hsmmc_reg_get() Kishon Vijay Abraham I
2015-08-27  9:13   ` Kishon Vijay Abraham I
2015-08-27  9:13 ` [PATCH v3 04/15] mmc: host: omap_hsmmc: use the ocrmask provided by the vmmc regulator Kishon Vijay Abraham I
2015-08-27  9:13   ` Kishon Vijay Abraham I
2015-08-27  9:13 ` [PATCH v3 05/15] mmc: host: omap_hsmmc: use mmc_host's vmmc and vqmmc Kishon Vijay Abraham I
2015-08-27  9:13   ` Kishon Vijay Abraham I
2015-08-27  9:13 ` [PATCH v3 06/15] mmc: host: omap_hsmmc: remove unnecessary pbias set_voltage Kishon Vijay Abraham I
2015-08-27  9:13   ` Kishon Vijay Abraham I
2015-08-27  9:13 ` [PATCH v3 07/15] mmc: host: omap_hsmmc: return error if any of the regulator APIs fail Kishon Vijay Abraham I
2015-08-27  9:13   ` Kishon Vijay Abraham I
2015-08-27  9:14 ` [PATCH v3 08/15] mmc: host: omap_hsmmc: add separate functions for enable/disable supply Kishon Vijay Abraham I
2015-08-27  9:14   ` Kishon Vijay Abraham I
2015-08-27  9:14 ` [PATCH v3 09/15] mmc: host: omap_hsmmc: add separate function to set pbias Kishon Vijay Abraham I
2015-08-27  9:14   ` Kishon Vijay Abraham I
2015-08-27  9:14 ` [PATCH v3 10/15] mmc: host: omap_hsmmc: avoid pbias regulator enable on power off Kishon Vijay Abraham I
2015-08-27  9:14   ` Kishon Vijay Abraham I
2015-08-27  9:14 ` Kishon Vijay Abraham I [this message]
2015-08-27  9:14   ` [PATCH v3 11/15] mmc: host: omap_hsmmc: don't use ->set_power to set initial regulator state Kishon Vijay Abraham I
2015-08-27  9:14 ` [PATCH v3 12/15] mmc: host: omap_hsmmc: enable/disable vmmc_aux regulator based on previous state Kishon Vijay Abraham I
2015-08-27  9:14   ` Kishon Vijay Abraham I
2015-08-27  9:14 ` [PATCH v3 13/15] mmc: host: omap_hsmmc: use regulator_is_enabled to find pbias status Kishon Vijay Abraham I
2015-08-27  9:14   ` Kishon Vijay Abraham I
2015-08-27 12:41   ` Ulf Hansson
2015-08-27 12:42     ` Ulf Hansson
2015-08-27 12:47       ` Kishon Vijay Abraham I
2015-08-27 12:49         ` Ulf Hansson
2015-08-27  9:14 ` [PATCH v3 14/15] mmc: host: omap_hsmmc: use ios->vdd for setting vmmc voltage Kishon Vijay Abraham I
2015-08-27  9:14   ` Kishon Vijay Abraham I
2015-08-27  9:14 ` [PATCH v3 15/15] mmc: host: omap_hsmmc: remove CONFIG_REGULATOR check Kishon Vijay Abraham I
2015-08-27  9:14   ` Kishon Vijay Abraham I
2015-08-27 13:09 ` [PATCH v3 00/15] omap_hsmmc: regulator usage cleanup and fixes Ulf Hansson
2015-08-27 13:20   ` Kishon Vijay Abraham I

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1440666847-12594-12-git-send-email-kishon@ti.com \
    --to=kishon@ti.com \
    --cc=afenkart@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=neilb@suse.de \
    --cc=nsekhar@ti.com \
    --cc=tony@atomide.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.