All of lore.kernel.org
 help / color / mirror / Atom feed
From: Deepak M <m.deepak@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [MIPI SEQ PARSING v2 PATCH 08/11] drm/i915: GPIO for CHT generic MIPI
Date: Thu, 10 Sep 2015 04:54:27 +0530	[thread overview]
Message-ID: <1441841070-11532-9-git-send-email-m.deepak@intel.com> (raw)
In-Reply-To: <1441841070-11532-1-git-send-email-m.deepak@intel.com>

From: Yogesh Mohan Marimuthu <yogesh.mohan.marimuthu@intel.com>

The GPIO configuration and register offsets are different from
baytrail for cherrytrail. Port the gpio programming accordingly
for cherrytrail in this patch.

v2: Rebase

Signed-off-by: Yogesh Mohan Marimuthu <yogesh.mohan.marimuthu@intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h            |   23 ++++++
 drivers/gpu/drm/i915/intel_dsi_panel_vbt.c |  117 +++++++++++++++++++++++-----
 2 files changed, 122 insertions(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 5bef50c..c5bea41 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -568,11 +568,21 @@
 #define   IOSF_PORT_DPIO			0x12
 #define   IOSF_PORT_DPIO_2			0x1a
 #define   IOSF_PORT_GPIO_NC			0x13
+#define   CHV_IOSF_PORT_GPIO_N			0x13
 #define   IOSF_PORT_GPIO_SC			0x48
+#define   CHV_IOSF_PORT_GPIO_SE			0x48
+#define   CHV_IOSF_PORT_GPIO_SW			0xB2
 #define   IOSF_PORT_GPIO_SUS			0xA8
+#define   CHV_IOSF_PORT_GPIO_E			0xA8
 #define   MAX_GPIO_NUM_NC			26
 #define   MAX_GPIO_NUM_SC			128
 #define   MAX_GPIO_NUM				172
+#define   CHV_MAX_GPIO_NUM_N			72
+#define   CHV_MAX_GPIO_NUM_SE			99
+#define   CHV_MAX_GPIO_NUM_SW			197
+#define   CHV_MIN_GPIO_NUM_SE			73
+#define   CHV_MIN_GPIO_NUM_SW			100
+#define   CHV_MIN_GPIO_NUM_E			198
 #define   IOSF_PORT_CCK				0x14
 #define   IOSF_PORT_CCU				0xA9
 #define   IOSF_PORT_GPS_CORE			0x48
@@ -580,6 +590,19 @@
 #define VLV_IOSF_DATA				(VLV_DISPLAY_BASE + 0x2104)
 #define VLV_IOSF_ADDR				(VLV_DISPLAY_BASE + 0x2108)
 
+#define VLV_GPIO_CFG				0x2000CC00
+#define VLV_GPIO_INPUT_DIS			0x04
+
+#define CHV_PAD_FMLY_BASE			0x4400
+#define CHV_PAD_FMLY_SIZE			0x400
+#define CHV_PAD_CFG_0_1_REG_SIZE		0x8
+#define CHV_PAD_CFG_REG_SIZE			0x4
+#define CHV_VBT_MAX_PINS_PER_FMLY		15
+
+#define CHV_GPIO_CFG_UNLOCK			0x00000000
+#define CHV_GPIO_CFG_HiZ			0x00008100
+#define CHV_GPIO_CFG_TX_STATE_SHIFT		1
+
 /* See configdb bunit SB addr map */
 #define BUNIT_REG_BISOC				0x11
 
diff --git a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
index 1aa5b19..b0d09f6 100644
--- a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
+++ b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
@@ -418,17 +418,75 @@ static const u8 *mipi_exec_delay(struct intel_dsi *intel_dsi, const u8 *data)
 
 	return data;
 }
-
-static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data)
+static int chv_program_gpio(struct intel_dsi *intel_dsi,
+				const u8 *data, const u8 **cur_data)
 {
+	struct drm_device *dev = intel_dsi->base.base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
 	u8 gpio, action;
+	u16 family_num;
 	u16 function, pad;
-	u32 val;
 	u8 block;
+
+	/*
+	 * Skipping the first byte as it is of no
+	 * interest for linux kernel in new VBT version
+	 */
+	if (dev_priv->vbt.dsi.seq_version >= 3)
+		data++;
+
+	gpio = *data++;
+
+	/* pull up/down */
+	action = *data++;
+
+	if (dev_priv->vbt.dsi.seq_version >= 3) {
+		if (gpio <= CHV_MAX_GPIO_NUM_N) {
+			block = CHV_IOSF_PORT_GPIO_N;
+			DRM_DEBUG_DRIVER("GPIO is in the north Block\n");
+		} else if (gpio <= CHV_MAX_GPIO_NUM_SE) {
+			block = CHV_IOSF_PORT_GPIO_SE;
+			gpio = gpio - CHV_MIN_GPIO_NUM_SE;
+			DRM_DEBUG_DRIVER("GPIO is in the south east Block\n");
+		} else if (gpio <= CHV_MAX_GPIO_NUM_SW) {
+			block = CHV_IOSF_PORT_GPIO_SW;
+			gpio = gpio - CHV_MIN_GPIO_NUM_SW;
+			DRM_DEBUG_DRIVER("GPIO is in the south west Block\n");
+		} else {
+			block = CHV_IOSF_PORT_GPIO_E;
+			gpio = gpio - CHV_MIN_GPIO_NUM_E;
+			DRM_DEBUG_DRIVER("GPIO is in the east Block\n");
+		}
+	} else
+		block = IOSF_PORT_GPIO_NC;
+
+	family_num =  gpio / CHV_VBT_MAX_PINS_PER_FMLY;
+	gpio = gpio - (family_num * CHV_VBT_MAX_PINS_PER_FMLY);
+	pad = CHV_PAD_FMLY_BASE + (family_num * CHV_PAD_FMLY_SIZE) +
+			(((u16)gpio) * CHV_PAD_CFG_0_1_REG_SIZE);
+	function = pad + CHV_PAD_CFG_REG_SIZE;
+
+	mutex_lock(&dev_priv->sb_lock);
+	vlv_gpio_write(dev_priv, block, function,
+					CHV_GPIO_CFG_UNLOCK);
+	vlv_gpio_write(dev_priv, block, pad, CHV_GPIO_CFG_HiZ |
+			(action << CHV_GPIO_CFG_TX_STATE_SHIFT));
+	mutex_unlock(&dev_priv->sb_lock);
+
+	*cur_data = data;
+
+	return 0;
+}
+
+static int vlv_program_gpio(struct intel_dsi *intel_dsi,
+		const u8 *data, const u8 **cur_data)
+{
 	struct drm_device *dev = intel_dsi->base.base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-
-	DRM_DEBUG_DRIVER("MIPI: executing gpio element\n");
+	u8 gpio, action;
+	u16 function, pad;
+	u32 val;
+	u8 block;
 
 	/*
 	 * Skipping the first byte as it is of no
@@ -444,39 +502,62 @@ static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data)
 
 	if (dev_priv->vbt.dsi.seq_version >= 3) {
 		if (gpio <= MAX_GPIO_NUM_NC) {
-			DRM_DEBUG_DRIVER("GPIO is in the north Block\n");
 			block = IOSF_PORT_GPIO_NC;
+			DRM_DEBUG_DRIVER("GPIO is in the north Block\n");
 		} else if (gpio > MAX_GPIO_NUM_NC && gpio <= MAX_GPIO_NUM_SC) {
-			DRM_DEBUG_DRIVER("GPIO is in the south Block\n");
 			block = IOSF_PORT_GPIO_SC;
+			DRM_DEBUG_DRIVER("GPIO is in the south Block\n");
 		} else if (gpio > MAX_GPIO_NUM_SC && gpio <= MAX_GPIO_NUM) {
-			DRM_DEBUG_DRIVER("GPIO is in the SUS Block\n");
 			block = IOSF_PORT_GPIO_SUS;
+			DRM_DEBUG_DRIVER("GPIO is in the SUS Block\n");
 		} else {
 			DRM_ERROR("GPIO number is not present in the table\n");
-			return NULL;
+			return -EINVAL;
 		}
-	} else {
+	} else
 		block = IOSF_PORT_GPIO_NC;
-	}
 
 	function = gtable[gpio].function_reg;
 	pad = gtable[gpio].pad_reg;
 
 	mutex_lock(&dev_priv->sb_lock);
+
 	if (!gtable[gpio].init) {
-		/* program the function */
-		/* FIXME: remove constant below */
-		vlv_gpio_write(dev_priv, IOSF_PORT_GPIO_NC, function, 0x2000CC00);
-		gtable[gpio].init = 1;
+		vlv_gpio_write(dev_priv, block, function,
+				VLV_GPIO_CFG);
+		gtable[gpio].init = true;
 	}
-
-	val = 0x4 | action;
+	val = VLV_GPIO_INPUT_DIS | action;
 
 	/* pull up/down */
-	vlv_gpio_write(dev_priv, IOSF_PORT_GPIO_NC, pad, val);
+	vlv_gpio_write(dev_priv, block, pad, val);
+
 	mutex_unlock(&dev_priv->sb_lock);
 
+	*cur_data = data;
+
+	return 0;
+}
+
+static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data)
+{
+	struct drm_device *dev = intel_dsi->base.base.dev;
+	int ret;
+
+	DRM_DEBUG_DRIVER("MIPI: executing gpio element\n");
+
+	ret = -EINVAL;
+
+	if (IS_CHERRYVIEW(dev))
+		ret = chv_program_gpio(intel_dsi, data, &data);
+	else if (IS_VALLEYVIEW(dev))
+		ret = vlv_program_gpio(intel_dsi, data, &data);
+	else
+		DRM_ERROR("GPIO programming missing for this platform.\n");
+
+	if (ret)
+		return NULL;
+
 	return data;
 }
 
-- 
1.7.9.5

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2015-09-09 23:20 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-09 23:24 [MIPI SEQ PARSING v2 PATCH 00/11] Patches to support the version 3 of MIPI sequence in VBT Deepak M
2015-09-09 23:24 ` [MIPI SEQ PARSING v2 PATCH 01/11] drm/i915: Adding the parsing logic for the i2c element Deepak M
2015-09-17  9:18   ` Jani Nikula
2015-09-22  6:46     ` Deepak, M
2015-09-09 23:24 ` [MIPI SEQ PARSING v2 PATCH 02/11] drm/i915: Updating asle structure with new fields Deepak M
2015-09-09 23:24 ` [MIPI SEQ PARSING v2 PATCH 03/11] drm/i915: Parsing VBT if size of VBT exceeds 6KB Deepak M
2015-09-16 13:24   ` Jani Nikula
2015-09-17 12:10   ` Jani Nikula
2015-09-22  6:37     ` Deepak, M
2015-09-22  7:24       ` Jani Nikula
2015-09-09 23:24 ` [MIPI SEQ PARSING v2 PATCH 04/11] drm/i915: Using the approprite vbt size if vbt is not in mailbox4 of opregion Deepak M
2015-09-17 12:18   ` Jani Nikula
2015-09-17 13:31     ` Jani Nikula
2015-09-22  6:11       ` Deepak, M
2015-09-22  6:24     ` Deepak, M
2015-09-09 23:24 ` [MIPI SEQ PARSING v2 PATCH 05/11] drm/i915: Added support the v3 mipi sequence block Deepak M
2015-09-17 14:38   ` Jani Nikula
2015-09-22  6:23     ` Deepak, M
2015-09-09 23:24 ` [MIPI SEQ PARSING v2 PATCH 06/11] drm/i915: extending gpio read/write to other cores Deepak M
2015-09-09 23:24 ` [MIPI SEQ PARSING v2 PATCH 07/11] drm/i915: Added the generic gpio sequence support and gpio table Deepak M
2015-09-17 14:44   ` Jani Nikula
2015-09-09 23:24 ` Deepak M [this message]
2015-09-09 23:24 ` [MIPI SEQ PARSING v2 PATCH 09/11] drm: Add few more wrapper functions for drm panel Deepak M
2015-09-09 23:24 ` [MIPI SEQ PARSING v2 PATCH 10/11] drm/i915: Add functions to execute the new sequences from VBT Deepak M
2015-09-09 23:24 ` [MIPI SEQ PARSING v2 PATCH 11/11] drm/i915: BXT GPIO support for backlight and panel control Deepak M

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1441841070-11532-9-git-send-email-m.deepak@intel.com \
    --to=m.deepak@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.