From: Rajendra Nayak <rnayak@codeaurora.org> To: linux-arm-msm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org, rui.zhang@intel.com, edubezval@gmail.com Cc: sboyd@codeaurora.org, srinivas.kandagatla@linaro.org, nrajan@codeaurora.org, lina.iyer@linaro.org, Rajendra Nayak <rnayak@codeaurora.org> Subject: [PATCH v2 6/9] arm: dts: msm8974: Add thermal zones, tsens and qfprom nodes Date: Wed, 16 Sep 2015 11:53:20 +0530 [thread overview] Message-ID: <1442384603-26053-7-git-send-email-rnayak@codeaurora.org> (raw) In-Reply-To: <1442384603-26053-1-git-send-email-rnayak@codeaurora.org> Add thermal zones, tsens and qfprom nodes Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> --- arch/arm/boot/dts/qcom-msm8974.dtsi | 105 ++++++++++++++++++++++++++++++++++++ 1 file changed, 105 insertions(+) diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index ab8e572..cc88412 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -86,6 +86,88 @@ }; }; + thermal-zones { + cpu-thermal0 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 5>; + + trips { + cpu_alert0: trip@0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit0: trip@1 { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 6>; + + trips { + cpu_alert1: trip@0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit1: trip@1 { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 7>; + + trips { + cpu_alert2: trip@0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit2: trip@1 { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal3 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 8>; + + trips { + cpu_alert3: trip@0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit3: trip@1 { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + cpu-pmu { compatible = "qcom,krait-pmu"; interrupts = <1 7 0xf04>; @@ -114,6 +196,29 @@ <0xf9002000 0x1000>; }; + qfprom: qfprom@fc4bc000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,qfprom"; + reg = <0xfc4bc000 0x1000>; + tsens_calib: calib@d0 { + reg = <0xd0 0x18>; + }; + tsens_backup: backup@440 { + reg = <0x440 0x10>; + }; + }; + + tsens: thermal-sensor@fc4a8000 { + compatible = "qcom,msm8974-tsens"; + reg = <0xfc4a8000 0x2000>; + nvmem-cells = <&tsens_calib>, <&tsens_backup>; + nvmem-cell-names = "calib", "calib_backup"; + qcom,tsens-slopes = <3200 3200 3200 3200 3200 3200 + 3200 3200 3200 3200 3200>; + #thermal-sensor-cells = <1>; + }; + timer@f9020000 { #address-cells = <1>; #size-cells = <1>; -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
WARNING: multiple messages have this Message-ID (diff)
From: rnayak@codeaurora.org (Rajendra Nayak) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 6/9] arm: dts: msm8974: Add thermal zones, tsens and qfprom nodes Date: Wed, 16 Sep 2015 11:53:20 +0530 [thread overview] Message-ID: <1442384603-26053-7-git-send-email-rnayak@codeaurora.org> (raw) In-Reply-To: <1442384603-26053-1-git-send-email-rnayak@codeaurora.org> Add thermal zones, tsens and qfprom nodes Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> --- arch/arm/boot/dts/qcom-msm8974.dtsi | 105 ++++++++++++++++++++++++++++++++++++ 1 file changed, 105 insertions(+) diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index ab8e572..cc88412 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -86,6 +86,88 @@ }; }; + thermal-zones { + cpu-thermal0 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 5>; + + trips { + cpu_alert0: trip at 0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit0: trip at 1 { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 6>; + + trips { + cpu_alert1: trip at 0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit1: trip at 1 { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 7>; + + trips { + cpu_alert2: trip at 0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit2: trip at 1 { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal3 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 8>; + + trips { + cpu_alert3: trip at 0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit3: trip at 1 { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + cpu-pmu { compatible = "qcom,krait-pmu"; interrupts = <1 7 0xf04>; @@ -114,6 +196,29 @@ <0xf9002000 0x1000>; }; + qfprom: qfprom at fc4bc000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,qfprom"; + reg = <0xfc4bc000 0x1000>; + tsens_calib: calib at d0 { + reg = <0xd0 0x18>; + }; + tsens_backup: backup at 440 { + reg = <0x440 0x10>; + }; + }; + + tsens: thermal-sensor at fc4a8000 { + compatible = "qcom,msm8974-tsens"; + reg = <0xfc4a8000 0x2000>; + nvmem-cells = <&tsens_calib>, <&tsens_backup>; + nvmem-cell-names = "calib", "calib_backup"; + qcom,tsens-slopes = <3200 3200 3200 3200 3200 3200 + 3200 3200 3200 3200 3200>; + #thermal-sensor-cells = <1>; + }; + timer at f9020000 { #address-cells = <1>; #size-cells = <1>; -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2015-09-16 6:23 UTC|newest] Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-09-16 6:23 [PATCH v2 0/9] qcom: Add support for TSENS driver Rajendra Nayak 2015-09-16 6:23 ` Rajendra Nayak 2015-09-16 6:23 ` [PATCH v2 1/9] thermal: qcom: tsens: Add a skeletal TSENS drivers Rajendra Nayak 2015-09-16 6:23 ` Rajendra Nayak 2015-09-16 13:44 ` Punit Agrawal 2015-09-16 13:44 ` Punit Agrawal 2015-09-21 4:26 ` Rajendra Nayak 2015-09-21 4:26 ` Rajendra Nayak 2015-09-16 6:23 ` [PATCH v2 2/9] thermal: qcom: tsens-8916: Add support for 8916 family of SoCs Rajendra Nayak 2015-09-16 6:23 ` Rajendra Nayak 2015-09-16 13:46 ` Punit Agrawal 2015-09-16 13:46 ` Punit Agrawal 2015-09-21 4:28 ` Rajendra Nayak 2015-09-21 4:28 ` Rajendra Nayak 2015-10-08 5:05 ` Rajendra Nayak 2015-10-08 5:05 ` Rajendra Nayak 2015-10-08 14:32 ` Punit Agrawal 2015-10-08 14:32 ` Punit Agrawal 2015-09-16 6:23 ` [PATCH v2 3/9] thermal: qcom: tsens-8974: Add support for 8974 " Rajendra Nayak 2015-09-16 6:23 ` Rajendra Nayak 2015-09-16 6:23 ` [PATCH v2 4/9] clk: qcom: create virtual child device for TSENS Rajendra Nayak 2015-09-16 6:23 ` Rajendra Nayak 2015-09-16 22:39 ` Stephen Boyd 2015-09-16 22:39 ` Stephen Boyd 2015-09-21 4:28 ` Rajendra Nayak 2015-09-21 4:28 ` Rajendra Nayak 2015-09-16 6:23 ` [PATCH v2 5/9] thermal: qcom: tsens-8960: Add support for 8960 family of SoCs Rajendra Nayak 2015-09-16 6:23 ` Rajendra Nayak 2015-09-16 6:23 ` Rajendra Nayak [this message] 2015-09-16 6:23 ` [PATCH v2 6/9] arm: dts: msm8974: Add thermal zones, tsens and qfprom nodes Rajendra Nayak 2015-09-16 6:23 ` [PATCH v2 7/9] arm: dts: apq8064: " Rajendra Nayak 2015-09-16 6:23 ` Rajendra Nayak 2015-09-16 6:23 ` [PATCH v2 8/9] arm: dts: apq8084: " Rajendra Nayak 2015-09-16 6:23 ` Rajendra Nayak 2015-09-16 6:23 ` [PATCH v2 9/9] arm64: dts: msm8916: " Rajendra Nayak 2015-09-16 6:23 ` Rajendra Nayak
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1442384603-26053-7-git-send-email-rnayak@codeaurora.org \ --to=rnayak@codeaurora.org \ --cc=edubezval@gmail.com \ --cc=lina.iyer@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=nrajan@codeaurora.org \ --cc=rui.zhang@intel.com \ --cc=sboyd@codeaurora.org \ --cc=srinivas.kandagatla@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.