From: Masahiro Yamada <yamada.masahiro@socionext.com> To: linux-arm-kernel@lists.infradead.org, arm@kernel.org Cc: Masahiro Yamada <yamada.masahiro@socionext.com>, Russell King <linux@arm.linux.org.uk>, devicetree@vger.kernel.org, Kumar Gala <galak@codeaurora.org>, linux-kernel@vger.kernel.org, Ian Campbell <ijc+devicetree@hellion.org.uk>, Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>, Mark Rutland <mark.rutland@arm.com> Subject: [PATCH v3 3/3] ARM: dts: uniphier: add outer cache controller nodes Date: Fri, 18 Sep 2015 13:37:34 +0900 [thread overview] Message-ID: <1442551054-2116-4-git-send-email-yamada.masahiro@socionext.com> (raw) In-Reply-To: <1442551054-2116-1-git-send-email-yamada.masahiro@socionext.com> Add L2 cache controller nodes for all the UniPhier SoC DTSI. Also, add an L3 cache controller node for PH1-Pro5 DTSI. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> --- arch/arm/boot/dts/uniphier-ph1-ld4.dtsi | 13 +++++++++++++ arch/arm/boot/dts/uniphier-ph1-pro4.dtsi | 14 ++++++++++++++ arch/arm/boot/dts/uniphier-ph1-pro5.dtsi | 27 +++++++++++++++++++++++++++ arch/arm/boot/dts/uniphier-ph1-sld3.dtsi | 14 ++++++++++++++ arch/arm/boot/dts/uniphier-ph1-sld8.dtsi | 13 +++++++++++++ arch/arm/boot/dts/uniphier-proxstream2.dtsi | 16 ++++++++++++++++ 6 files changed, 97 insertions(+) diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi index a6a185f..ae13469 100644 --- a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi @@ -55,6 +55,7 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + next-level-cache = <&l2>; }; }; @@ -91,6 +92,18 @@ #size-cells = <1>; }; + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, + <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <(512 * 1024)>; + cache-sets = <256>; + cache-line-size = <128>; + cache-level = <2>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi index e8bbc45..85377b2 100644 --- a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi @@ -56,12 +56,14 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + next-level-cache = <&l2>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + next-level-cache = <&l2>; }; }; @@ -98,6 +100,18 @@ #size-cells = <1>; }; + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, + <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <(768 * 1024)>; + cache-sets = <256>; + cache-line-size = <128>; + cache-level = <2>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; diff --git a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi index 59c2b12..96da01e 100644 --- a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi @@ -56,12 +56,14 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + next-level-cache = <&l2>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + next-level-cache = <&l2>; }; }; @@ -98,6 +100,31 @@ #size-cells = <1>; }; + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, + <0x506c0000 0x400>; + interrupts = <0 190 4>, <0 191 4>; + cache-unified; + cache-size = <(2 * 1024 * 1024)>; + cache-sets = <512>; + cache-line-size = <128>; + cache-level = <2>; + next-level-cache = <&l3>; + }; + + l3: l3-cache@500c8000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c8000 0x2000>, <0x503c8100 0x8>, + <0x506c8000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <(2 * 1024 * 1024)>; + cache-sets = <512>; + cache-line-size = <256>; + cache-level = <3>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi index 3cc90cd..945b37f 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi @@ -56,12 +56,14 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + next-level-cache = <&l2>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + next-level-cache = <&l2>; }; }; @@ -120,6 +122,18 @@ <0x20000100 0x100>; }; + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, + <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <(512 * 1024)>; + cache-sets = <256>; + cache-line-size = <128>; + cache-level = <2>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi index 58067df..c98428c 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi @@ -55,6 +55,7 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + next-level-cache = <&l2>; }; }; @@ -91,6 +92,18 @@ #size-cells = <1>; }; + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, + <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <(256 * 1024)>; + cache-sets = <256>; + cache-line-size = <128>; + cache-level = <2>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; diff --git a/arch/arm/boot/dts/uniphier-proxstream2.dtsi b/arch/arm/boot/dts/uniphier-proxstream2.dtsi index 4c7b246..ad5fb39 100644 --- a/arch/arm/boot/dts/uniphier-proxstream2.dtsi +++ b/arch/arm/boot/dts/uniphier-proxstream2.dtsi @@ -56,24 +56,28 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + next-level-cache = <&l2>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + next-level-cache = <&l2>; }; cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <2>; + next-level-cache = <&l2>; }; cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <3>; + next-level-cache = <&l2>; }; }; @@ -110,6 +114,18 @@ #size-cells = <1>; }; + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, + <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>; + cache-unified; + cache-size = <(1280 * 1024)>; + cache-sets = <512>; + cache-line-size = <128>; + cache-level = <2>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: yamada.masahiro@socionext.com (Masahiro Yamada) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 3/3] ARM: dts: uniphier: add outer cache controller nodes Date: Fri, 18 Sep 2015 13:37:34 +0900 [thread overview] Message-ID: <1442551054-2116-4-git-send-email-yamada.masahiro@socionext.com> (raw) In-Reply-To: <1442551054-2116-1-git-send-email-yamada.masahiro@socionext.com> Add L2 cache controller nodes for all the UniPhier SoC DTSI. Also, add an L3 cache controller node for PH1-Pro5 DTSI. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> --- arch/arm/boot/dts/uniphier-ph1-ld4.dtsi | 13 +++++++++++++ arch/arm/boot/dts/uniphier-ph1-pro4.dtsi | 14 ++++++++++++++ arch/arm/boot/dts/uniphier-ph1-pro5.dtsi | 27 +++++++++++++++++++++++++++ arch/arm/boot/dts/uniphier-ph1-sld3.dtsi | 14 ++++++++++++++ arch/arm/boot/dts/uniphier-ph1-sld8.dtsi | 13 +++++++++++++ arch/arm/boot/dts/uniphier-proxstream2.dtsi | 16 ++++++++++++++++ 6 files changed, 97 insertions(+) diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi index a6a185f..ae13469 100644 --- a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi @@ -55,6 +55,7 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + next-level-cache = <&l2>; }; }; @@ -91,6 +92,18 @@ #size-cells = <1>; }; + l2: l2-cache at 500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, + <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <(512 * 1024)>; + cache-sets = <256>; + cache-line-size = <128>; + cache-level = <2>; + }; + serial0: serial at 54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi index e8bbc45..85377b2 100644 --- a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi @@ -56,12 +56,14 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + next-level-cache = <&l2>; }; cpu at 1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + next-level-cache = <&l2>; }; }; @@ -98,6 +100,18 @@ #size-cells = <1>; }; + l2: l2-cache at 500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, + <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <(768 * 1024)>; + cache-sets = <256>; + cache-line-size = <128>; + cache-level = <2>; + }; + serial0: serial at 54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; diff --git a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi index 59c2b12..96da01e 100644 --- a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi @@ -56,12 +56,14 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + next-level-cache = <&l2>; }; cpu at 1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + next-level-cache = <&l2>; }; }; @@ -98,6 +100,31 @@ #size-cells = <1>; }; + l2: l2-cache at 500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, + <0x506c0000 0x400>; + interrupts = <0 190 4>, <0 191 4>; + cache-unified; + cache-size = <(2 * 1024 * 1024)>; + cache-sets = <512>; + cache-line-size = <128>; + cache-level = <2>; + next-level-cache = <&l3>; + }; + + l3: l3-cache at 500c8000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c8000 0x2000>, <0x503c8100 0x8>, + <0x506c8000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <(2 * 1024 * 1024)>; + cache-sets = <512>; + cache-line-size = <256>; + cache-level = <3>; + }; + serial0: serial at 54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi index 3cc90cd..945b37f 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi @@ -56,12 +56,14 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + next-level-cache = <&l2>; }; cpu at 1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + next-level-cache = <&l2>; }; }; @@ -120,6 +122,18 @@ <0x20000100 0x100>; }; + l2: l2-cache at 500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, + <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <(512 * 1024)>; + cache-sets = <256>; + cache-line-size = <128>; + cache-level = <2>; + }; + serial0: serial at 54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi index 58067df..c98428c 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi @@ -55,6 +55,7 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + next-level-cache = <&l2>; }; }; @@ -91,6 +92,18 @@ #size-cells = <1>; }; + l2: l2-cache at 500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, + <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <(256 * 1024)>; + cache-sets = <256>; + cache-line-size = <128>; + cache-level = <2>; + }; + serial0: serial at 54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; diff --git a/arch/arm/boot/dts/uniphier-proxstream2.dtsi b/arch/arm/boot/dts/uniphier-proxstream2.dtsi index 4c7b246..ad5fb39 100644 --- a/arch/arm/boot/dts/uniphier-proxstream2.dtsi +++ b/arch/arm/boot/dts/uniphier-proxstream2.dtsi @@ -56,24 +56,28 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + next-level-cache = <&l2>; }; cpu at 1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + next-level-cache = <&l2>; }; cpu at 2 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <2>; + next-level-cache = <&l2>; }; cpu at 3 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <3>; + next-level-cache = <&l2>; }; }; @@ -110,6 +114,18 @@ #size-cells = <1>; }; + l2: l2-cache at 500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, + <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>; + cache-unified; + cache-size = <(1280 * 1024)>; + cache-sets = <512>; + cache-line-size = <128>; + cache-level = <2>; + }; + serial0: serial at 54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; -- 1.9.1
next prev parent reply other threads:[~2015-09-18 4:38 UTC|newest] Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-09-18 4:37 [PATCH v3 0/3] ARM: uniphier: add outer cache support and rework SMP operations Masahiro Yamada 2015-09-18 4:37 ` Masahiro Yamada 2015-09-18 4:37 ` Masahiro Yamada 2015-09-18 4:37 ` [PATCH v3 1/3] ARM: uniphier: add outer cache support Masahiro Yamada 2015-09-18 4:37 ` Masahiro Yamada 2015-09-18 4:37 ` Masahiro Yamada 2015-09-21 14:06 ` Rob Herring 2015-09-21 14:06 ` Rob Herring 2015-09-21 14:06 ` Rob Herring 2015-09-21 19:38 ` Russell King - ARM Linux 2015-09-21 19:38 ` Russell King - ARM Linux 2015-09-21 19:38 ` Russell King - ARM Linux 2015-09-22 5:27 ` Masahiro Yamada 2015-09-22 5:27 ` Masahiro Yamada 2015-09-22 5:27 ` Masahiro Yamada 2015-09-26 15:32 ` Masahiro Yamada 2015-09-26 15:32 ` Masahiro Yamada 2015-09-26 15:32 ` Masahiro Yamada 2015-09-18 4:37 ` [PATCH v3 2/3] ARM: uniphier: rework SMP operations to use trampoline code Masahiro Yamada 2015-09-18 4:37 ` Masahiro Yamada 2015-09-18 4:37 ` Masahiro Yamada [this message] 2015-09-18 4:37 ` [PATCH v3 3/3] ARM: dts: uniphier: add outer cache controller nodes Masahiro Yamada 2015-10-06 14:20 ` [PATCH v3 0/3] ARM: uniphier: add outer cache support and rework SMP operations Arnd Bergmann 2015-10-06 14:20 ` Arnd Bergmann 2015-10-06 14:20 ` Arnd Bergmann 2015-10-06 14:22 ` Arnd Bergmann 2015-10-06 14:22 ` Arnd Bergmann 2015-10-06 14:22 ` Arnd Bergmann 2015-10-10 6:59 ` Masahiro Yamada 2015-10-10 6:59 ` Masahiro Yamada 2015-10-10 6:59 ` Masahiro Yamada 2015-10-26 4:16 ` Masahiro Yamada 2015-10-26 4:16 ` Masahiro Yamada 2015-10-26 4:16 ` Masahiro Yamada 2015-10-27 0:22 ` Olof Johansson 2015-10-27 0:22 ` Olof Johansson 2015-10-27 0:22 ` Olof Johansson
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1442551054-2116-4-git-send-email-yamada.masahiro@socionext.com \ --to=yamada.masahiro@socionext.com \ --cc=arm@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=galak@codeaurora.org \ --cc=ijc+devicetree@hellion.org.uk \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux@arm.linux.org.uk \ --cc=mark.rutland@arm.com \ --cc=pawel.moll@arm.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.