From: Sonika Jindal <sonika.jindal@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 2/2] drm/i915/bxt: eDP low vswing support
Date: Fri, 18 Sep 2015 14:11:06 +0530 [thread overview]
Message-ID: <1442565666-7468-2-git-send-email-sonika.jindal@intel.com> (raw)
In-Reply-To: <1442565666-7468-1-git-send-email-sonika.jindal@intel.com>
Adding voltage swing table for edp to support low vswings.
Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
---
drivers/gpu/drm/i915/intel_ddi.c | 23 +++++++++++++++++++----
1 file changed, 19 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 0d9b304..17281bc 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -256,9 +256,6 @@ struct bxt_ddi_buf_trans {
bool default_index; /* true if the entry represents default value */
};
-/* BSpec does not define separate vswing/pre-emphasis values for eDP.
- * Using DP values for eDP as well.
- */
static const struct bxt_ddi_buf_trans bxt_ddi_translations_dp[] = {
/* Idx NT mV diff db */
{ 52, 0, 0, 128, true }, /* 0: 400 0 */
@@ -273,6 +270,20 @@ static const struct bxt_ddi_buf_trans bxt_ddi_translations_dp[] = {
{ 154, 0x9A, 1, 128, false }, /* 9: 1200 0 */
};
+static const struct bxt_ddi_buf_trans bxt_ddi_translations_edp[] = {
+ /* Idx NT mV diff db */
+ { 26, 0, 0, 128, false }, /* 0: 200 0 */
+ { 38, 0, 0, 112, false }, /* 1: 200 1.5 */
+ { 48, 0, 0, 96, false }, /* 2: 200 4 */
+ { 54, 0, 0, 69, false }, /* 3: 200 6 */
+ { 32, 0, 0, 128, false }, /* 4: 250 0 */
+ { 48, 0, 0, 104, false }, /* 5: 250 1.5 */
+ { 54, 0, 0, 85, false }, /* 6: 250 4 */
+ { 43, 0, 0, 128, false }, /* 7: 300 0 */
+ { 54, 0, 0, 101, false }, /* 8: 300 1.5 */
+ { 48, 0, 0, 128, false }, /* 9: 300 0 */
+};
+
/* BSpec has 2 recommended values - entries 0 and 8.
* Using the entry with higher vswing.
*/
@@ -2113,7 +2124,11 @@ static void bxt_ddi_vswing_sequence(struct drm_device *dev, u32 level,
u32 n_entries, i;
uint32_t val;
- if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) {
+ if (type == INTEL_OUTPUT_EDP && dev_priv->edp_low_vswing) {
+ n_entries = ARRAY_SIZE(bxt_ddi_translations_edp);
+ ddi_translations = bxt_ddi_translations_edp;
+ } else if (type == INTEL_OUTPUT_DISPLAYPORT
+ || type == INTEL_OUTPUT_EDP) {
n_entries = ARRAY_SIZE(bxt_ddi_translations_dp);
ddi_translations = bxt_ddi_translations_dp;
} else if (type == INTEL_OUTPUT_HDMI) {
--
1.7.10.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-09-18 8:52 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-18 8:41 [PATCH 1/2] drm/i915/bxt: Set oscaledcompmethod to enable scale value Sonika Jindal
2015-09-18 8:41 ` Sonika Jindal [this message]
2015-09-21 17:32 ` [PATCH 2/2] drm/i915/bxt: eDP low vswing support Sivakumar Thulasimani
2015-09-24 4:54 ` [PATCH] " Sonika Jindal
2015-09-28 8:22 ` Daniel Vetter
2015-09-21 17:30 ` [PATCH 1/2] drm/i915/bxt: Set oscaledcompmethod to enable scale value Sivakumar Thulasimani
2015-09-22 13:02 ` Imre Deak
2015-09-22 18:31 ` Sivakumar Thulasimani
2015-09-22 19:32 ` Imre Deak
2015-09-23 4:07 ` Jindal, Sonika
2015-09-23 11:45 ` Imre Deak
2015-09-24 4:52 ` [PATCH] " Sonika Jindal
2015-09-24 11:12 ` Imre Deak
2015-09-28 8:27 ` Daniel Vetter
2015-09-24 5:03 ` [PATCH 1/2] " Jindal, Sonika
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1442565666-7468-2-git-send-email-sonika.jindal@intel.com \
--to=sonika.jindal@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.