All of lore.kernel.org
 help / color / mirror / Atom feed
From: Boris Brezillon <boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
To: Thierry Reding
	<thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	linux-pwm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Liam Girdwood <lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Jingoo Han <jingoohan1-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	linux-fbdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Bryan Wu <cooloney-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Richard Purdie <rpurdie-Fm38FmjxZ/leoWH0uzbU5w@public.gmane.org>,
	Jacek Anaszewski
	<j.anaszewski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
	linux-leds-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Maxime Ripard
	<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
	linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
	Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>,
	linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	Jean-Christophe Plagniol-Villard
	<plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org>,
	Tomi Valkeinen <tomi.valkeinen-l0cyMroinI0@public.gmane.org>,
	Daniel Mack <daniel-cYrQPVfZoowdnm+yROfE0A@public.gmane.org>,
	Haojian Zhuang
	<haojian.zhuang-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Robert Jarzmik <robert.jarzmik-GANU6spQydw@public.gmane.org>
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	"Doug Anderson"
	<dianders-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>,
	"Uwe Kleine-König"
	<u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
	"Boris Brezillon"
	<boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Subject: [PATCH v3 07/12] pwm: add the core infrastructure to allow atomic update
Date: Mon, 21 Sep 2015 11:33:24 +0200	[thread overview]
Message-ID: <1442828009-6241-8-git-send-email-boris.brezillon@free-electrons.com> (raw)
In-Reply-To: <1442828009-6241-1-git-send-email-boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>

Add an ->apply() method to the pwm_ops struct to allow PWM drivers to
implement atomic update.
This method will be preferred over the ->enable(), ->disable() and
->config() methods if available.

Add the pwm_get_state(), pwm_get_default_state() and pwm_apply_state()
functions for PWM users to be able to use the atomic update feature.

Note that the pwm_apply_state() does not guarantee the atomicity of the
update operation, it all depends on the availability and implementation
of the ->apply() method.

Signed-off-by: Boris Brezillon <boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
---
 drivers/pwm/core.c  | 142 +++++++++++++++++++++++++++++++++++++++++++++++-----
 include/linux/pwm.h |  27 ++++++++++
 2 files changed, 157 insertions(+), 12 deletions(-)

diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c
index 60ad758..ff3c662 100644
--- a/drivers/pwm/core.c
+++ b/drivers/pwm/core.c
@@ -46,6 +46,12 @@ static struct pwm_device *pwm_to_device(unsigned int pwm)
 	return radix_tree_lookup(&pwm_tree, pwm);
 }
 
+static void pwm_set_state(struct pwm_device *pwm,
+			  const struct pwm_state *state)
+{
+	pwm->state = *state;
+}
+
 static int alloc_pwms(int pwm, unsigned int count)
 {
 	unsigned int from = 0;
@@ -226,6 +232,19 @@ void *pwm_get_chip_data(struct pwm_device *pwm)
 }
 EXPORT_SYMBOL_GPL(pwm_get_chip_data);
 
+static bool pwm_ops_check(const struct pwm_ops *ops)
+{
+	/* driver supports legacy, non-atomic operation */
+	if (ops->config && ops->enable && ops->disable)
+		return true;
+
+	/* driver supports atomic operation */
+	if (ops->apply)
+		return true;
+
+	return false;
+}
+
 /**
  * pwmchip_add_with_polarity() - register a new PWM chip
  * @chip: the PWM chip to add
@@ -244,8 +263,10 @@ int pwmchip_add_with_polarity(struct pwm_chip *chip,
 	unsigned int i;
 	int ret;
 
-	if (!chip || !chip->dev || !chip->ops || !chip->ops->config ||
-	    !chip->ops->enable || !chip->ops->disable || !chip->npwm)
+	if (!chip || !chip->dev || !chip->ops || !chip->npwm)
+		return -EINVAL;
+
+	if (!pwm_ops_check(chip->ops))
 		return -EINVAL;
 
 	mutex_lock(&pwm_lock);
@@ -445,7 +466,19 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 	if (!pwm || duty_ns < 0 || period_ns <= 0 || duty_ns > period_ns)
 		return -EINVAL;
 
-	err = pwm->chip->ops->config(pwm->chip, pwm, duty_ns, period_ns);
+	if (pwm->chip->ops->apply) {
+		struct pwm_state state;
+
+		pwm_get_state(pwm, &state);
+		state.period = period_ns;
+		state.duty_cycle = duty_ns;
+
+		err = pwm->chip->ops->apply(pwm->chip, pwm, &state);
+	} else {
+		err = pwm->chip->ops->config(pwm->chip, pwm, duty_ns,
+					     period_ns);
+	}
+
 	if (err)
 		return err;
 
@@ -473,6 +506,18 @@ int pwm_set_polarity(struct pwm_device *pwm, enum pwm_polarity polarity)
 	if (!pwm || !pwm->chip->ops)
 		return -EINVAL;
 
+	if (pwm->chip->ops->apply) {
+		struct pwm_state state;
+
+		pwm_get_state(pwm, &state);
+		state.polarity = polarity;
+		err = pwm->chip->ops->apply(pwm->chip, pwm, &state);
+		if (!err)
+			pwm->state.polarity = polarity;
+
+		return err;
+	}
+
 	if (!pwm->chip->ops->set_polarity)
 		return -ENOSYS;
 
@@ -497,17 +542,29 @@ EXPORT_SYMBOL_GPL(pwm_set_polarity);
  */
 int pwm_enable(struct pwm_device *pwm)
 {
-	if (pwm && !pwm_is_enabled(pwm)) {
-		int err;
+	int err;
 
-		err = pwm->chip->ops->enable(pwm->chip, pwm);
-		if (!err)
-			pwm->state.enabled = true;
+	if (!pwm)
+		return -EINVAL;
 
-		return err;
+	if (pwm_is_enabled(pwm))
+		return 0;
+
+	if (pwm->chip->ops->apply) {
+		struct pwm_state state;
+
+		pwm_get_state(pwm, &state);
+		state.enabled = true;
+
+		err = pwm->chip->ops->apply(pwm->chip, pwm, &state);
+	} else {
+		err = pwm->chip->ops->enable(pwm->chip, pwm);
 	}
 
-	return pwm ? 0 : -EINVAL;
+	if (!err)
+		pwm->state.enabled = true;
+
+	return err;
 }
 EXPORT_SYMBOL_GPL(pwm_enable);
 
@@ -517,13 +574,74 @@ EXPORT_SYMBOL_GPL(pwm_enable);
  */
 void pwm_disable(struct pwm_device *pwm)
 {
-	if (pwm && pwm_is_enabled(pwm)) {
+	if (!pwm || !pwm_is_enabled(pwm))
+		return;
+
+	if (pwm->chip->ops->apply) {
+		struct pwm_state state;
+
+		pwm_get_state(pwm, &state);
+		state.enabled = false;
+
+		pwm->chip->ops->apply(pwm->chip, pwm, &state);
+	} else {
 		pwm->chip->ops->disable(pwm->chip, pwm);
-		pwm->state.enabled = false;
 	}
+
+	pwm->state.enabled = false;
 }
 EXPORT_SYMBOL_GPL(pwm_disable);
 
+/**
+ * pwm_apply_state() - atomically apply a new state to a PWM device
+ * @pwm: PWM device
+ * @state: new state to apply
+ */
+int pwm_apply_state(struct pwm_device *pwm, const struct pwm_state *state)
+{
+	int err = 0;
+
+	if (!pwm)
+		return -EINVAL;
+
+	if (!memcmp(state, &pwm->state, sizeof(*state)))
+		return 0;
+
+	if (pwm->chip->ops->apply) {
+		err = pwm->chip->ops->apply(pwm->chip, pwm, state);
+		if (!err)
+			pwm_set_state(pwm, state);
+	} else {
+		/*
+		 * FIXME: restore the initial state in case of error.
+		 */
+		if (state->polarity != pwm->state.polarity) {
+			pwm_disable(pwm);
+			err = pwm_set_polarity(pwm, state->polarity);
+			if (err)
+				goto out;
+		}
+
+		if (state->period != pwm->state.period ||
+		    state->duty_cycle != pwm->state.duty_cycle) {
+			err = pwm_config(pwm, state->period, state->duty_cycle);
+			if (err)
+				goto out;
+		}
+
+		if (state->enabled != pwm->state.enabled) {
+			if (state->enabled)
+				err = pwm_enable(pwm);
+			else
+				pwm_disable(pwm);
+		}
+	}
+
+out:
+	return err;
+}
+EXPORT_SYMBOL_GPL(pwm_apply_state);
+
 static struct pwm_chip *of_node_to_pwmchip(struct device_node *np)
 {
 	struct pwm_chip *chip;
diff --git a/include/linux/pwm.h b/include/linux/pwm.h
index cddb12b..11ee041 100644
--- a/include/linux/pwm.h
+++ b/include/linux/pwm.h
@@ -171,6 +171,30 @@ static inline enum pwm_polarity pwm_get_polarity(const struct pwm_device *pwm)
 	return pwm ? pwm->state.polarity : PWM_POLARITY_NORMAL;
 }
 
+int pwm_apply_state(struct pwm_device *pwm, const struct pwm_state *state);
+
+/**
+ * pwm_get_state() - retrieve the current PWM state
+ * @pwm: PWM device
+ * @state: state to fill with the current PWM state
+ */
+static inline void pwm_get_state(struct pwm_device *pwm,
+				 struct pwm_state *state)
+{
+	*state = pwm->state;
+}
+
+/**
+ * pwm_get_default_state() - retrieve the default PWM state
+ * @pwm: PWM device
+ * @state: state to fill with the default PWM state
+ */
+static inline void pwm_get_default_state(struct pwm_device *pwm,
+					 struct pwm_state *state)
+{
+	*state = pwm->default_state;
+}
+
 /**
  * struct pwm_ops - PWM controller operations
  * @request: optional hook for requesting a PWM
@@ -179,6 +203,7 @@ static inline enum pwm_polarity pwm_get_polarity(const struct pwm_device *pwm)
  * @set_polarity: configure the polarity of this PWM
  * @enable: enable PWM output toggling
  * @disable: disable PWM output toggling
+ * @apply: atomically apply a new PWM config
  * @reset_state: reset the current PWM state (pwm->state) to the actual
  *		 hardware state. This function is only called once per
  *		 PWM device when the PWM chip is registered.
@@ -194,6 +219,8 @@ struct pwm_ops {
 			    enum pwm_polarity polarity);
 	int (*enable)(struct pwm_chip *chip, struct pwm_device *pwm);
 	void (*disable)(struct pwm_chip *chip, struct pwm_device *pwm);
+	int (*apply)(struct pwm_chip *chip, struct pwm_device *pwm,
+		     const struct pwm_state *state);
 	void (*reset_state)(struct pwm_chip *chip, struct pwm_device *pwm);
 #ifdef CONFIG_DEBUG_FS
 	void (*dbg_show)(struct pwm_chip *chip, struct seq_file *s);
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: Boris Brezillon <boris.brezillon@free-electrons.com>
To: Thierry Reding <thierry.reding@gmail.com>,
	linux-pwm@vger.kernel.org, Mark Brown <broonie@kernel.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Jingoo Han <jingoohan1@gmail.com>,
	Lee Jones <lee.jones@linaro.org>,
	linux-fbdev@vger.kernel.org, Bryan Wu <cooloney@gmail.com>,
	Richard Purdie <rpurdie@rpsys.net>,
	Jacek Anaszewski <j.anaszewski@samsung.com>,
	linux-leds@vger.kernel.org,
	Maxime Ripard <maxime.ripard@free-electrons.com>,
	linux-sunxi@googlegroups.com, Heiko Stuebner <heiko@sntech.de>,
	linux-rockchip@lists.infradead.org,
	Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
	Tomi Valkeinen <tomi.valkeinen@ti.com>,
	Daniel Mack <daniel@zonque.org>,
	Haojian Zhuang <haojian.zhuang@gmail.com>,
	Robert Jarzmik <robert.jarzmik@free.fr>
Cc: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	"Doug Anderson" <dianders@google.com>,
	"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
	"Boris Brezillon" <boris.brezillon@free-electrons.com>
Subject: [PATCH v3 07/12] pwm: add the core infrastructure to allow atomic update
Date: Mon, 21 Sep 2015 11:33:24 +0200	[thread overview]
Message-ID: <1442828009-6241-8-git-send-email-boris.brezillon@free-electrons.com> (raw)
In-Reply-To: <1442828009-6241-1-git-send-email-boris.brezillon@free-electrons.com>

Add an ->apply() method to the pwm_ops struct to allow PWM drivers to
implement atomic update.
This method will be preferred over the ->enable(), ->disable() and
->config() methods if available.

Add the pwm_get_state(), pwm_get_default_state() and pwm_apply_state()
functions for PWM users to be able to use the atomic update feature.

Note that the pwm_apply_state() does not guarantee the atomicity of the
update operation, it all depends on the availability and implementation
of the ->apply() method.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
 drivers/pwm/core.c  | 142 +++++++++++++++++++++++++++++++++++++++++++++++-----
 include/linux/pwm.h |  27 ++++++++++
 2 files changed, 157 insertions(+), 12 deletions(-)

diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c
index 60ad758..ff3c662 100644
--- a/drivers/pwm/core.c
+++ b/drivers/pwm/core.c
@@ -46,6 +46,12 @@ static struct pwm_device *pwm_to_device(unsigned int pwm)
 	return radix_tree_lookup(&pwm_tree, pwm);
 }
 
+static void pwm_set_state(struct pwm_device *pwm,
+			  const struct pwm_state *state)
+{
+	pwm->state = *state;
+}
+
 static int alloc_pwms(int pwm, unsigned int count)
 {
 	unsigned int from = 0;
@@ -226,6 +232,19 @@ void *pwm_get_chip_data(struct pwm_device *pwm)
 }
 EXPORT_SYMBOL_GPL(pwm_get_chip_data);
 
+static bool pwm_ops_check(const struct pwm_ops *ops)
+{
+	/* driver supports legacy, non-atomic operation */
+	if (ops->config && ops->enable && ops->disable)
+		return true;
+
+	/* driver supports atomic operation */
+	if (ops->apply)
+		return true;
+
+	return false;
+}
+
 /**
  * pwmchip_add_with_polarity() - register a new PWM chip
  * @chip: the PWM chip to add
@@ -244,8 +263,10 @@ int pwmchip_add_with_polarity(struct pwm_chip *chip,
 	unsigned int i;
 	int ret;
 
-	if (!chip || !chip->dev || !chip->ops || !chip->ops->config ||
-	    !chip->ops->enable || !chip->ops->disable || !chip->npwm)
+	if (!chip || !chip->dev || !chip->ops || !chip->npwm)
+		return -EINVAL;
+
+	if (!pwm_ops_check(chip->ops))
 		return -EINVAL;
 
 	mutex_lock(&pwm_lock);
@@ -445,7 +466,19 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 	if (!pwm || duty_ns < 0 || period_ns <= 0 || duty_ns > period_ns)
 		return -EINVAL;
 
-	err = pwm->chip->ops->config(pwm->chip, pwm, duty_ns, period_ns);
+	if (pwm->chip->ops->apply) {
+		struct pwm_state state;
+
+		pwm_get_state(pwm, &state);
+		state.period = period_ns;
+		state.duty_cycle = duty_ns;
+
+		err = pwm->chip->ops->apply(pwm->chip, pwm, &state);
+	} else {
+		err = pwm->chip->ops->config(pwm->chip, pwm, duty_ns,
+					     period_ns);
+	}
+
 	if (err)
 		return err;
 
@@ -473,6 +506,18 @@ int pwm_set_polarity(struct pwm_device *pwm, enum pwm_polarity polarity)
 	if (!pwm || !pwm->chip->ops)
 		return -EINVAL;
 
+	if (pwm->chip->ops->apply) {
+		struct pwm_state state;
+
+		pwm_get_state(pwm, &state);
+		state.polarity = polarity;
+		err = pwm->chip->ops->apply(pwm->chip, pwm, &state);
+		if (!err)
+			pwm->state.polarity = polarity;
+
+		return err;
+	}
+
 	if (!pwm->chip->ops->set_polarity)
 		return -ENOSYS;
 
@@ -497,17 +542,29 @@ EXPORT_SYMBOL_GPL(pwm_set_polarity);
  */
 int pwm_enable(struct pwm_device *pwm)
 {
-	if (pwm && !pwm_is_enabled(pwm)) {
-		int err;
+	int err;
 
-		err = pwm->chip->ops->enable(pwm->chip, pwm);
-		if (!err)
-			pwm->state.enabled = true;
+	if (!pwm)
+		return -EINVAL;
 
-		return err;
+	if (pwm_is_enabled(pwm))
+		return 0;
+
+	if (pwm->chip->ops->apply) {
+		struct pwm_state state;
+
+		pwm_get_state(pwm, &state);
+		state.enabled = true;
+
+		err = pwm->chip->ops->apply(pwm->chip, pwm, &state);
+	} else {
+		err = pwm->chip->ops->enable(pwm->chip, pwm);
 	}
 
-	return pwm ? 0 : -EINVAL;
+	if (!err)
+		pwm->state.enabled = true;
+
+	return err;
 }
 EXPORT_SYMBOL_GPL(pwm_enable);
 
@@ -517,13 +574,74 @@ EXPORT_SYMBOL_GPL(pwm_enable);
  */
 void pwm_disable(struct pwm_device *pwm)
 {
-	if (pwm && pwm_is_enabled(pwm)) {
+	if (!pwm || !pwm_is_enabled(pwm))
+		return;
+
+	if (pwm->chip->ops->apply) {
+		struct pwm_state state;
+
+		pwm_get_state(pwm, &state);
+		state.enabled = false;
+
+		pwm->chip->ops->apply(pwm->chip, pwm, &state);
+	} else {
 		pwm->chip->ops->disable(pwm->chip, pwm);
-		pwm->state.enabled = false;
 	}
+
+	pwm->state.enabled = false;
 }
 EXPORT_SYMBOL_GPL(pwm_disable);
 
+/**
+ * pwm_apply_state() - atomically apply a new state to a PWM device
+ * @pwm: PWM device
+ * @state: new state to apply
+ */
+int pwm_apply_state(struct pwm_device *pwm, const struct pwm_state *state)
+{
+	int err = 0;
+
+	if (!pwm)
+		return -EINVAL;
+
+	if (!memcmp(state, &pwm->state, sizeof(*state)))
+		return 0;
+
+	if (pwm->chip->ops->apply) {
+		err = pwm->chip->ops->apply(pwm->chip, pwm, state);
+		if (!err)
+			pwm_set_state(pwm, state);
+	} else {
+		/*
+		 * FIXME: restore the initial state in case of error.
+		 */
+		if (state->polarity != pwm->state.polarity) {
+			pwm_disable(pwm);
+			err = pwm_set_polarity(pwm, state->polarity);
+			if (err)
+				goto out;
+		}
+
+		if (state->period != pwm->state.period ||
+		    state->duty_cycle != pwm->state.duty_cycle) {
+			err = pwm_config(pwm, state->period, state->duty_cycle);
+			if (err)
+				goto out;
+		}
+
+		if (state->enabled != pwm->state.enabled) {
+			if (state->enabled)
+				err = pwm_enable(pwm);
+			else
+				pwm_disable(pwm);
+		}
+	}
+
+out:
+	return err;
+}
+EXPORT_SYMBOL_GPL(pwm_apply_state);
+
 static struct pwm_chip *of_node_to_pwmchip(struct device_node *np)
 {
 	struct pwm_chip *chip;
diff --git a/include/linux/pwm.h b/include/linux/pwm.h
index cddb12b..11ee041 100644
--- a/include/linux/pwm.h
+++ b/include/linux/pwm.h
@@ -171,6 +171,30 @@ static inline enum pwm_polarity pwm_get_polarity(const struct pwm_device *pwm)
 	return pwm ? pwm->state.polarity : PWM_POLARITY_NORMAL;
 }
 
+int pwm_apply_state(struct pwm_device *pwm, const struct pwm_state *state);
+
+/**
+ * pwm_get_state() - retrieve the current PWM state
+ * @pwm: PWM device
+ * @state: state to fill with the current PWM state
+ */
+static inline void pwm_get_state(struct pwm_device *pwm,
+				 struct pwm_state *state)
+{
+	*state = pwm->state;
+}
+
+/**
+ * pwm_get_default_state() - retrieve the default PWM state
+ * @pwm: PWM device
+ * @state: state to fill with the default PWM state
+ */
+static inline void pwm_get_default_state(struct pwm_device *pwm,
+					 struct pwm_state *state)
+{
+	*state = pwm->default_state;
+}
+
 /**
  * struct pwm_ops - PWM controller operations
  * @request: optional hook for requesting a PWM
@@ -179,6 +203,7 @@ static inline enum pwm_polarity pwm_get_polarity(const struct pwm_device *pwm)
  * @set_polarity: configure the polarity of this PWM
  * @enable: enable PWM output toggling
  * @disable: disable PWM output toggling
+ * @apply: atomically apply a new PWM config
  * @reset_state: reset the current PWM state (pwm->state) to the actual
  *		 hardware state. This function is only called once per
  *		 PWM device when the PWM chip is registered.
@@ -194,6 +219,8 @@ struct pwm_ops {
 			    enum pwm_polarity polarity);
 	int (*enable)(struct pwm_chip *chip, struct pwm_device *pwm);
 	void (*disable)(struct pwm_chip *chip, struct pwm_device *pwm);
+	int (*apply)(struct pwm_chip *chip, struct pwm_device *pwm,
+		     const struct pwm_state *state);
 	void (*reset_state)(struct pwm_chip *chip, struct pwm_device *pwm);
 #ifdef CONFIG_DEBUG_FS
 	void (*dbg_show)(struct pwm_chip *chip, struct seq_file *s);
-- 
1.9.1


WARNING: multiple messages have this Message-ID (diff)
From: Boris Brezillon <boris.brezillon@free-electrons.com>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 07/12] pwm: add the core infrastructure to allow atomic update
Date: Mon, 21 Sep 2015 09:33:24 +0000	[thread overview]
Message-ID: <1442828009-6241-8-git-send-email-boris.brezillon@free-electrons.com> (raw)
In-Reply-To: <1442828009-6241-1-git-send-email-boris.brezillon@free-electrons.com>

Add an ->apply() method to the pwm_ops struct to allow PWM drivers to
implement atomic update.
This method will be preferred over the ->enable(), ->disable() and
->config() methods if available.

Add the pwm_get_state(), pwm_get_default_state() and pwm_apply_state()
functions for PWM users to be able to use the atomic update feature.

Note that the pwm_apply_state() does not guarantee the atomicity of the
update operation, it all depends on the availability and implementation
of the ->apply() method.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
 drivers/pwm/core.c  | 142 +++++++++++++++++++++++++++++++++++++++++++++++-----
 include/linux/pwm.h |  27 ++++++++++
 2 files changed, 157 insertions(+), 12 deletions(-)

diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c
index 60ad758..ff3c662 100644
--- a/drivers/pwm/core.c
+++ b/drivers/pwm/core.c
@@ -46,6 +46,12 @@ static struct pwm_device *pwm_to_device(unsigned int pwm)
 	return radix_tree_lookup(&pwm_tree, pwm);
 }
 
+static void pwm_set_state(struct pwm_device *pwm,
+			  const struct pwm_state *state)
+{
+	pwm->state = *state;
+}
+
 static int alloc_pwms(int pwm, unsigned int count)
 {
 	unsigned int from = 0;
@@ -226,6 +232,19 @@ void *pwm_get_chip_data(struct pwm_device *pwm)
 }
 EXPORT_SYMBOL_GPL(pwm_get_chip_data);
 
+static bool pwm_ops_check(const struct pwm_ops *ops)
+{
+	/* driver supports legacy, non-atomic operation */
+	if (ops->config && ops->enable && ops->disable)
+		return true;
+
+	/* driver supports atomic operation */
+	if (ops->apply)
+		return true;
+
+	return false;
+}
+
 /**
  * pwmchip_add_with_polarity() - register a new PWM chip
  * @chip: the PWM chip to add
@@ -244,8 +263,10 @@ int pwmchip_add_with_polarity(struct pwm_chip *chip,
 	unsigned int i;
 	int ret;
 
-	if (!chip || !chip->dev || !chip->ops || !chip->ops->config ||
-	    !chip->ops->enable || !chip->ops->disable || !chip->npwm)
+	if (!chip || !chip->dev || !chip->ops || !chip->npwm)
+		return -EINVAL;
+
+	if (!pwm_ops_check(chip->ops))
 		return -EINVAL;
 
 	mutex_lock(&pwm_lock);
@@ -445,7 +466,19 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 	if (!pwm || duty_ns < 0 || period_ns <= 0 || duty_ns > period_ns)
 		return -EINVAL;
 
-	err = pwm->chip->ops->config(pwm->chip, pwm, duty_ns, period_ns);
+	if (pwm->chip->ops->apply) {
+		struct pwm_state state;
+
+		pwm_get_state(pwm, &state);
+		state.period = period_ns;
+		state.duty_cycle = duty_ns;
+
+		err = pwm->chip->ops->apply(pwm->chip, pwm, &state);
+	} else {
+		err = pwm->chip->ops->config(pwm->chip, pwm, duty_ns,
+					     period_ns);
+	}
+
 	if (err)
 		return err;
 
@@ -473,6 +506,18 @@ int pwm_set_polarity(struct pwm_device *pwm, enum pwm_polarity polarity)
 	if (!pwm || !pwm->chip->ops)
 		return -EINVAL;
 
+	if (pwm->chip->ops->apply) {
+		struct pwm_state state;
+
+		pwm_get_state(pwm, &state);
+		state.polarity = polarity;
+		err = pwm->chip->ops->apply(pwm->chip, pwm, &state);
+		if (!err)
+			pwm->state.polarity = polarity;
+
+		return err;
+	}
+
 	if (!pwm->chip->ops->set_polarity)
 		return -ENOSYS;
 
@@ -497,17 +542,29 @@ EXPORT_SYMBOL_GPL(pwm_set_polarity);
  */
 int pwm_enable(struct pwm_device *pwm)
 {
-	if (pwm && !pwm_is_enabled(pwm)) {
-		int err;
+	int err;
 
-		err = pwm->chip->ops->enable(pwm->chip, pwm);
-		if (!err)
-			pwm->state.enabled = true;
+	if (!pwm)
+		return -EINVAL;
 
-		return err;
+	if (pwm_is_enabled(pwm))
+		return 0;
+
+	if (pwm->chip->ops->apply) {
+		struct pwm_state state;
+
+		pwm_get_state(pwm, &state);
+		state.enabled = true;
+
+		err = pwm->chip->ops->apply(pwm->chip, pwm, &state);
+	} else {
+		err = pwm->chip->ops->enable(pwm->chip, pwm);
 	}
 
-	return pwm ? 0 : -EINVAL;
+	if (!err)
+		pwm->state.enabled = true;
+
+	return err;
 }
 EXPORT_SYMBOL_GPL(pwm_enable);
 
@@ -517,13 +574,74 @@ EXPORT_SYMBOL_GPL(pwm_enable);
  */
 void pwm_disable(struct pwm_device *pwm)
 {
-	if (pwm && pwm_is_enabled(pwm)) {
+	if (!pwm || !pwm_is_enabled(pwm))
+		return;
+
+	if (pwm->chip->ops->apply) {
+		struct pwm_state state;
+
+		pwm_get_state(pwm, &state);
+		state.enabled = false;
+
+		pwm->chip->ops->apply(pwm->chip, pwm, &state);
+	} else {
 		pwm->chip->ops->disable(pwm->chip, pwm);
-		pwm->state.enabled = false;
 	}
+
+	pwm->state.enabled = false;
 }
 EXPORT_SYMBOL_GPL(pwm_disable);
 
+/**
+ * pwm_apply_state() - atomically apply a new state to a PWM device
+ * @pwm: PWM device
+ * @state: new state to apply
+ */
+int pwm_apply_state(struct pwm_device *pwm, const struct pwm_state *state)
+{
+	int err = 0;
+
+	if (!pwm)
+		return -EINVAL;
+
+	if (!memcmp(state, &pwm->state, sizeof(*state)))
+		return 0;
+
+	if (pwm->chip->ops->apply) {
+		err = pwm->chip->ops->apply(pwm->chip, pwm, state);
+		if (!err)
+			pwm_set_state(pwm, state);
+	} else {
+		/*
+		 * FIXME: restore the initial state in case of error.
+		 */
+		if (state->polarity != pwm->state.polarity) {
+			pwm_disable(pwm);
+			err = pwm_set_polarity(pwm, state->polarity);
+			if (err)
+				goto out;
+		}
+
+		if (state->period != pwm->state.period ||
+		    state->duty_cycle != pwm->state.duty_cycle) {
+			err = pwm_config(pwm, state->period, state->duty_cycle);
+			if (err)
+				goto out;
+		}
+
+		if (state->enabled != pwm->state.enabled) {
+			if (state->enabled)
+				err = pwm_enable(pwm);
+			else
+				pwm_disable(pwm);
+		}
+	}
+
+out:
+	return err;
+}
+EXPORT_SYMBOL_GPL(pwm_apply_state);
+
 static struct pwm_chip *of_node_to_pwmchip(struct device_node *np)
 {
 	struct pwm_chip *chip;
diff --git a/include/linux/pwm.h b/include/linux/pwm.h
index cddb12b..11ee041 100644
--- a/include/linux/pwm.h
+++ b/include/linux/pwm.h
@@ -171,6 +171,30 @@ static inline enum pwm_polarity pwm_get_polarity(const struct pwm_device *pwm)
 	return pwm ? pwm->state.polarity : PWM_POLARITY_NORMAL;
 }
 
+int pwm_apply_state(struct pwm_device *pwm, const struct pwm_state *state);
+
+/**
+ * pwm_get_state() - retrieve the current PWM state
+ * @pwm: PWM device
+ * @state: state to fill with the current PWM state
+ */
+static inline void pwm_get_state(struct pwm_device *pwm,
+				 struct pwm_state *state)
+{
+	*state = pwm->state;
+}
+
+/**
+ * pwm_get_default_state() - retrieve the default PWM state
+ * @pwm: PWM device
+ * @state: state to fill with the default PWM state
+ */
+static inline void pwm_get_default_state(struct pwm_device *pwm,
+					 struct pwm_state *state)
+{
+	*state = pwm->default_state;
+}
+
 /**
  * struct pwm_ops - PWM controller operations
  * @request: optional hook for requesting a PWM
@@ -179,6 +203,7 @@ static inline enum pwm_polarity pwm_get_polarity(const struct pwm_device *pwm)
  * @set_polarity: configure the polarity of this PWM
  * @enable: enable PWM output toggling
  * @disable: disable PWM output toggling
+ * @apply: atomically apply a new PWM config
  * @reset_state: reset the current PWM state (pwm->state) to the actual
  *		 hardware state. This function is only called once per
  *		 PWM device when the PWM chip is registered.
@@ -194,6 +219,8 @@ struct pwm_ops {
 			    enum pwm_polarity polarity);
 	int (*enable)(struct pwm_chip *chip, struct pwm_device *pwm);
 	void (*disable)(struct pwm_chip *chip, struct pwm_device *pwm);
+	int (*apply)(struct pwm_chip *chip, struct pwm_device *pwm,
+		     const struct pwm_state *state);
 	void (*reset_state)(struct pwm_chip *chip, struct pwm_device *pwm);
 #ifdef CONFIG_DEBUG_FS
 	void (*dbg_show)(struct pwm_chip *chip, struct seq_file *s);
-- 
1.9.1


WARNING: multiple messages have this Message-ID (diff)
From: boris.brezillon@free-electrons.com (Boris Brezillon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 07/12] pwm: add the core infrastructure to allow atomic update
Date: Mon, 21 Sep 2015 11:33:24 +0200	[thread overview]
Message-ID: <1442828009-6241-8-git-send-email-boris.brezillon@free-electrons.com> (raw)
In-Reply-To: <1442828009-6241-1-git-send-email-boris.brezillon@free-electrons.com>

Add an ->apply() method to the pwm_ops struct to allow PWM drivers to
implement atomic update.
This method will be preferred over the ->enable(), ->disable() and
->config() methods if available.

Add the pwm_get_state(), pwm_get_default_state() and pwm_apply_state()
functions for PWM users to be able to use the atomic update feature.

Note that the pwm_apply_state() does not guarantee the atomicity of the
update operation, it all depends on the availability and implementation
of the ->apply() method.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
 drivers/pwm/core.c  | 142 +++++++++++++++++++++++++++++++++++++++++++++++-----
 include/linux/pwm.h |  27 ++++++++++
 2 files changed, 157 insertions(+), 12 deletions(-)

diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c
index 60ad758..ff3c662 100644
--- a/drivers/pwm/core.c
+++ b/drivers/pwm/core.c
@@ -46,6 +46,12 @@ static struct pwm_device *pwm_to_device(unsigned int pwm)
 	return radix_tree_lookup(&pwm_tree, pwm);
 }
 
+static void pwm_set_state(struct pwm_device *pwm,
+			  const struct pwm_state *state)
+{
+	pwm->state = *state;
+}
+
 static int alloc_pwms(int pwm, unsigned int count)
 {
 	unsigned int from = 0;
@@ -226,6 +232,19 @@ void *pwm_get_chip_data(struct pwm_device *pwm)
 }
 EXPORT_SYMBOL_GPL(pwm_get_chip_data);
 
+static bool pwm_ops_check(const struct pwm_ops *ops)
+{
+	/* driver supports legacy, non-atomic operation */
+	if (ops->config && ops->enable && ops->disable)
+		return true;
+
+	/* driver supports atomic operation */
+	if (ops->apply)
+		return true;
+
+	return false;
+}
+
 /**
  * pwmchip_add_with_polarity() - register a new PWM chip
  * @chip: the PWM chip to add
@@ -244,8 +263,10 @@ int pwmchip_add_with_polarity(struct pwm_chip *chip,
 	unsigned int i;
 	int ret;
 
-	if (!chip || !chip->dev || !chip->ops || !chip->ops->config ||
-	    !chip->ops->enable || !chip->ops->disable || !chip->npwm)
+	if (!chip || !chip->dev || !chip->ops || !chip->npwm)
+		return -EINVAL;
+
+	if (!pwm_ops_check(chip->ops))
 		return -EINVAL;
 
 	mutex_lock(&pwm_lock);
@@ -445,7 +466,19 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 	if (!pwm || duty_ns < 0 || period_ns <= 0 || duty_ns > period_ns)
 		return -EINVAL;
 
-	err = pwm->chip->ops->config(pwm->chip, pwm, duty_ns, period_ns);
+	if (pwm->chip->ops->apply) {
+		struct pwm_state state;
+
+		pwm_get_state(pwm, &state);
+		state.period = period_ns;
+		state.duty_cycle = duty_ns;
+
+		err = pwm->chip->ops->apply(pwm->chip, pwm, &state);
+	} else {
+		err = pwm->chip->ops->config(pwm->chip, pwm, duty_ns,
+					     period_ns);
+	}
+
 	if (err)
 		return err;
 
@@ -473,6 +506,18 @@ int pwm_set_polarity(struct pwm_device *pwm, enum pwm_polarity polarity)
 	if (!pwm || !pwm->chip->ops)
 		return -EINVAL;
 
+	if (pwm->chip->ops->apply) {
+		struct pwm_state state;
+
+		pwm_get_state(pwm, &state);
+		state.polarity = polarity;
+		err = pwm->chip->ops->apply(pwm->chip, pwm, &state);
+		if (!err)
+			pwm->state.polarity = polarity;
+
+		return err;
+	}
+
 	if (!pwm->chip->ops->set_polarity)
 		return -ENOSYS;
 
@@ -497,17 +542,29 @@ EXPORT_SYMBOL_GPL(pwm_set_polarity);
  */
 int pwm_enable(struct pwm_device *pwm)
 {
-	if (pwm && !pwm_is_enabled(pwm)) {
-		int err;
+	int err;
 
-		err = pwm->chip->ops->enable(pwm->chip, pwm);
-		if (!err)
-			pwm->state.enabled = true;
+	if (!pwm)
+		return -EINVAL;
 
-		return err;
+	if (pwm_is_enabled(pwm))
+		return 0;
+
+	if (pwm->chip->ops->apply) {
+		struct pwm_state state;
+
+		pwm_get_state(pwm, &state);
+		state.enabled = true;
+
+		err = pwm->chip->ops->apply(pwm->chip, pwm, &state);
+	} else {
+		err = pwm->chip->ops->enable(pwm->chip, pwm);
 	}
 
-	return pwm ? 0 : -EINVAL;
+	if (!err)
+		pwm->state.enabled = true;
+
+	return err;
 }
 EXPORT_SYMBOL_GPL(pwm_enable);
 
@@ -517,13 +574,74 @@ EXPORT_SYMBOL_GPL(pwm_enable);
  */
 void pwm_disable(struct pwm_device *pwm)
 {
-	if (pwm && pwm_is_enabled(pwm)) {
+	if (!pwm || !pwm_is_enabled(pwm))
+		return;
+
+	if (pwm->chip->ops->apply) {
+		struct pwm_state state;
+
+		pwm_get_state(pwm, &state);
+		state.enabled = false;
+
+		pwm->chip->ops->apply(pwm->chip, pwm, &state);
+	} else {
 		pwm->chip->ops->disable(pwm->chip, pwm);
-		pwm->state.enabled = false;
 	}
+
+	pwm->state.enabled = false;
 }
 EXPORT_SYMBOL_GPL(pwm_disable);
 
+/**
+ * pwm_apply_state() - atomically apply a new state to a PWM device
+ * @pwm: PWM device
+ * @state: new state to apply
+ */
+int pwm_apply_state(struct pwm_device *pwm, const struct pwm_state *state)
+{
+	int err = 0;
+
+	if (!pwm)
+		return -EINVAL;
+
+	if (!memcmp(state, &pwm->state, sizeof(*state)))
+		return 0;
+
+	if (pwm->chip->ops->apply) {
+		err = pwm->chip->ops->apply(pwm->chip, pwm, state);
+		if (!err)
+			pwm_set_state(pwm, state);
+	} else {
+		/*
+		 * FIXME: restore the initial state in case of error.
+		 */
+		if (state->polarity != pwm->state.polarity) {
+			pwm_disable(pwm);
+			err = pwm_set_polarity(pwm, state->polarity);
+			if (err)
+				goto out;
+		}
+
+		if (state->period != pwm->state.period ||
+		    state->duty_cycle != pwm->state.duty_cycle) {
+			err = pwm_config(pwm, state->period, state->duty_cycle);
+			if (err)
+				goto out;
+		}
+
+		if (state->enabled != pwm->state.enabled) {
+			if (state->enabled)
+				err = pwm_enable(pwm);
+			else
+				pwm_disable(pwm);
+		}
+	}
+
+out:
+	return err;
+}
+EXPORT_SYMBOL_GPL(pwm_apply_state);
+
 static struct pwm_chip *of_node_to_pwmchip(struct device_node *np)
 {
 	struct pwm_chip *chip;
diff --git a/include/linux/pwm.h b/include/linux/pwm.h
index cddb12b..11ee041 100644
--- a/include/linux/pwm.h
+++ b/include/linux/pwm.h
@@ -171,6 +171,30 @@ static inline enum pwm_polarity pwm_get_polarity(const struct pwm_device *pwm)
 	return pwm ? pwm->state.polarity : PWM_POLARITY_NORMAL;
 }
 
+int pwm_apply_state(struct pwm_device *pwm, const struct pwm_state *state);
+
+/**
+ * pwm_get_state() - retrieve the current PWM state
+ * @pwm: PWM device
+ * @state: state to fill with the current PWM state
+ */
+static inline void pwm_get_state(struct pwm_device *pwm,
+				 struct pwm_state *state)
+{
+	*state = pwm->state;
+}
+
+/**
+ * pwm_get_default_state() - retrieve the default PWM state
+ * @pwm: PWM device
+ * @state: state to fill with the default PWM state
+ */
+static inline void pwm_get_default_state(struct pwm_device *pwm,
+					 struct pwm_state *state)
+{
+	*state = pwm->default_state;
+}
+
 /**
  * struct pwm_ops - PWM controller operations
  * @request: optional hook for requesting a PWM
@@ -179,6 +203,7 @@ static inline enum pwm_polarity pwm_get_polarity(const struct pwm_device *pwm)
  * @set_polarity: configure the polarity of this PWM
  * @enable: enable PWM output toggling
  * @disable: disable PWM output toggling
+ * @apply: atomically apply a new PWM config
  * @reset_state: reset the current PWM state (pwm->state) to the actual
  *		 hardware state. This function is only called once per
  *		 PWM device when the PWM chip is registered.
@@ -194,6 +219,8 @@ struct pwm_ops {
 			    enum pwm_polarity polarity);
 	int (*enable)(struct pwm_chip *chip, struct pwm_device *pwm);
 	void (*disable)(struct pwm_chip *chip, struct pwm_device *pwm);
+	int (*apply)(struct pwm_chip *chip, struct pwm_device *pwm,
+		     const struct pwm_state *state);
 	void (*reset_state)(struct pwm_chip *chip, struct pwm_device *pwm);
 #ifdef CONFIG_DEBUG_FS
 	void (*dbg_show)(struct pwm_chip *chip, struct seq_file *s);
-- 
1.9.1

  parent reply	other threads:[~2015-09-21  9:33 UTC|newest]

Thread overview: 197+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-21  9:33 [PATCH v3 00/12] pwm: add support for atomic update Boris Brezillon
2015-09-21  9:33 ` Boris Brezillon
2015-09-21  9:33 ` Boris Brezillon
     [not found] ` <1442828009-6241-1-git-send-email-boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2015-09-21  9:33   ` [PATCH v3 01/12] pwm: introduce default period and polarity concepts Boris Brezillon
2015-09-21  9:33     ` Boris Brezillon
2015-09-21  9:33     ` Boris Brezillon
2015-09-21  9:33     ` Boris Brezillon
2015-09-21 18:20     ` Robert Jarzmik
2015-09-21 18:20       ` Robert Jarzmik
2015-09-21 18:20       ` Robert Jarzmik
2015-09-22 21:49     ` Lee Jones
2015-09-22 21:49       ` Lee Jones
2015-09-22 21:49       ` Lee Jones
2015-09-22 21:49       ` Lee Jones
     [not found]     ` <1442828009-6241-2-git-send-email-boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2015-09-22  6:36       ` Jacek Anaszewski
2015-09-22  6:36         ` Jacek Anaszewski
2015-09-22  6:36         ` Jacek Anaszewski
2015-09-22  6:36         ` Jacek Anaszewski
2015-11-07  2:35       ` Alexandre Belloni
2015-11-07  2:35         ` Alexandre Belloni
2015-11-07  2:35         ` Alexandre Belloni
2015-11-07  2:35         ` Alexandre Belloni
2015-09-21  9:33   ` [PATCH v3 02/12] pwm: define a new pwm_state struct Boris Brezillon
2015-09-21  9:33     ` Boris Brezillon
2015-09-21  9:33     ` Boris Brezillon
2015-09-21  9:33     ` Boris Brezillon
2015-09-21  9:33   ` [PATCH v3 03/12] pwm: move the enabled/disabled info to " Boris Brezillon
2015-09-21  9:33     ` Boris Brezillon
2015-09-21  9:33     ` Boris Brezillon
2015-09-21  9:33     ` Boris Brezillon
2015-09-21  9:33   ` [PATCH v3 04/12] backlight: pwm_bl: remove useless call to pwm_set_period Boris Brezillon
2015-09-21  9:33     ` Boris Brezillon
2015-09-21  9:33     ` Boris Brezillon
2015-09-21  9:33     ` Boris Brezillon
2015-09-22 22:12     ` Lee Jones
2015-09-22 22:12       ` Lee Jones
2015-09-22 22:12       ` Lee Jones
2015-09-22 22:12       ` Lee Jones
2015-09-21  9:33   ` [PATCH v3 05/12] pwm: declare a default PWM state Boris Brezillon
2015-09-21  9:33     ` Boris Brezillon
2015-09-21  9:33     ` Boris Brezillon
2015-09-21  9:33     ` Boris Brezillon
2015-09-21  9:33   ` [PATCH v3 06/12] pwm: add the PWM initial state retrieval infra Boris Brezillon
2015-09-21  9:33     ` Boris Brezillon
2015-09-21  9:33     ` Boris Brezillon
2015-09-21  9:33     ` Boris Brezillon
2015-09-21  9:33   ` Boris Brezillon [this message]
2015-09-21  9:33     ` [PATCH v3 07/12] pwm: add the core infrastructure to allow atomic update Boris Brezillon
2015-09-21  9:33     ` Boris Brezillon
2015-09-21  9:33     ` Boris Brezillon
2015-09-21  9:33   ` [PATCH v3 08/12] pwm: add information about polarity, duty cycle and period to debugfs Boris Brezillon
2015-09-21  9:33     ` Boris Brezillon
2015-09-21  9:33     ` Boris Brezillon
2015-09-21  9:33     ` Boris Brezillon
2015-09-21  9:33   ` [PATCH v3 09/12] pwm: rockchip: add initial state retrieval Boris Brezillon
2015-09-21  9:33     ` Boris Brezillon
2015-09-21  9:33     ` Boris Brezillon
2015-09-21  9:33     ` Boris Brezillon
2015-09-21  9:33   ` [PATCH v3 10/12] pwm: rockchip: add support for atomic update Boris Brezillon
2015-09-21  9:33     ` Boris Brezillon
2015-09-21  9:33     ` Boris Brezillon
2015-09-21  9:33     ` Boris Brezillon
2015-09-21  9:33   ` [PATCH v3 11/12] regulator: pwm: implement ->enable(), ->disable() and ->is_enabled methods Boris Brezillon
2015-09-21  9:33     ` Boris Brezillon
2015-09-21  9:33     ` Boris Brezillon
2015-09-21  9:33     ` Boris Brezillon
     [not found]     ` <1442828009-6241-12-git-send-email-boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2015-09-21 21:13       ` Mark Brown
2015-09-21 21:13         ` Mark Brown
2015-09-21 21:13         ` Mark Brown
2015-09-21 21:13         ` Mark Brown
2015-09-21  9:33   ` [PATCH v3 12/12] regulator: pwm: properly initialize the ->state field Boris Brezillon
2015-09-21  9:33     ` Boris Brezillon
2015-09-21  9:33     ` Boris Brezillon
2015-09-21  9:33     ` Boris Brezillon
2015-09-21 21:10     ` Mark Brown
2015-09-21 21:10       ` Mark Brown
2015-09-21 21:10       ` Mark Brown
2015-09-21 21:10       ` Mark Brown
2015-09-21 22:30   ` [PATCH v3 00/12] pwm: add support for atomic update Heiko Stübner
2015-10-09 21:02   ` Boris Brezillon
2015-10-09 21:02     ` Boris Brezillon
2015-10-09 21:02     ` Boris Brezillon
2015-10-09 21:02     ` Boris Brezillon
2015-10-19 10:12   ` Heiko Stübner
2015-09-21 22:30 ` Heiko Stübner
2015-09-21 22:30   ` Heiko Stübner
2015-09-21 22:30   ` Heiko Stübner
2015-09-21 22:30 ` Heiko Stübner
2015-09-21 22:30 ` Heiko Stübner
2015-09-21 22:30 ` Heiko Stübner
2015-09-21 22:30 ` Heiko Stübner
2015-10-10 15:11 ` [PATCH v3 pre-03/12] pwm: rcar: make use of pwm_is_enabled() Boris Brezillon
2015-10-10 15:11   ` Boris Brezillon
2015-10-19 10:12 ` [PATCH v3 00/12] pwm: add support for atomic update Heiko Stübner
2015-10-19 10:12 ` Heiko Stübner
2015-10-19 10:12   ` Heiko Stübner
2015-10-19 10:12   ` Heiko Stübner
2015-11-10 17:34   ` Thierry Reding
2015-11-10 17:34     ` Thierry Reding
2015-11-10 17:34     ` Thierry Reding
2015-11-10 17:34     ` Thierry Reding
2015-11-10 18:26     ` Boris Brezillon
2015-11-10 18:26       ` Boris Brezillon
2015-11-10 18:26       ` Boris Brezillon
2015-11-10 18:26       ` Boris Brezillon
2016-01-25 16:28     ` Doug Anderson
2016-01-25 16:28       ` Doug Anderson
2016-01-25 16:28       ` Doug Anderson
2016-01-25 16:28       ` Doug Anderson
     [not found]       ` <CAD=FV=WL3jYEgVe-m6QcAyQwfJgdX4J5OtKisKwyoKOrTSpEQA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-01-25 17:08         ` Thierry Reding
2016-01-25 17:08           ` Thierry Reding
2016-01-25 17:08           ` Thierry Reding
2016-01-25 17:08           ` Thierry Reding
2016-01-25 17:55           ` Boris Brezillon
2016-01-25 17:55             ` Boris Brezillon
2016-01-25 17:55             ` Boris Brezillon
2016-01-25 17:55             ` Boris Brezillon
2016-01-25 18:51           ` Doug Anderson
2016-01-25 18:51             ` Doug Anderson
2016-01-25 18:51             ` Doug Anderson
2016-01-25 18:51             ` Doug Anderson
2016-01-25 18:51             ` Doug Anderson
     [not found]             ` <CAD=FV=Xvxeqo3imUmjukC5iYk3EZkrJ04G7C1B-w4xyr-r6-2Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-02-03 14:53               ` Thierry Reding
2016-02-03 14:53                 ` Thierry Reding
2016-02-03 14:53                 ` Thierry Reding
2016-02-03 14:53                 ` Thierry Reding
2016-02-03 19:04                 ` 'Doug Anderson' via linux-sunxi
2016-02-03 19:04                   ` Doug Anderson
2016-02-03 19:04                   ` Doug Anderson
2016-02-03 19:04                   ` Doug Anderson
     [not found]                   ` <CAD=FV=U_x1cxx6RrHuVgVV8GbOwm9DXXJcyiArbbQySUOaxrvQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-02-04 11:02                     ` Mark Brown
2016-02-04 11:02                       ` Mark Brown
2016-02-04 11:02                       ` Mark Brown
2016-02-04 11:02                       ` Mark Brown
2016-02-04 14:01                       ` Boris Brezillon
2016-02-04 14:01                         ` Boris Brezillon
2016-02-04 14:01                         ` Boris Brezillon
2016-02-04 14:01                         ` Boris Brezillon
2016-02-23 14:57                         ` Thierry Reding
2016-02-23 14:57                           ` Thierry Reding
2016-02-23 14:57                           ` Thierry Reding
2016-02-23 14:57                           ` Thierry Reding
2016-02-22 16:27                     ` 'Doug Anderson' via linux-sunxi
2016-02-22 16:27                       ` Doug Anderson
2016-02-22 16:27                       ` Doug Anderson
2016-02-22 16:27                       ` Doug Anderson
2016-02-22 17:59                     ` Thierry Reding
2016-02-22 17:59                       ` Thierry Reding
2016-02-22 17:59                       ` Thierry Reding
2016-02-22 17:59                       ` Thierry Reding
2016-02-22 19:15                       ` Doug Anderson
2016-02-22 19:15                         ` Doug Anderson
2016-02-22 19:15                         ` Doug Anderson
2016-02-22 19:15                         ` Doug Anderson
     [not found]                         ` <CAD=FV=UCErW3EjYRtwt49_ztNR7cyY4U0o4R_dxdomer-Ac2Dg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-02-22 21:24                           ` Mark Brown
2016-02-22 21:24                             ` Mark Brown
2016-02-22 21:24                             ` Mark Brown
2016-02-22 21:24                             ` Mark Brown
     [not found]                             ` <20160222212438.GG18327-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2016-02-23  3:03                               ` 'Doug Anderson' via linux-sunxi
2016-02-23  3:03                                 ` Doug Anderson
2016-02-23  3:03                                 ` Doug Anderson
2016-02-23  3:03                                 ` Doug Anderson
2016-02-23 14:38                           ` Thierry Reding
2016-02-23 14:38                             ` Thierry Reding
2016-02-23 14:38                             ` Thierry Reding
2016-02-23 14:38                             ` Thierry Reding
2016-02-23 17:35                             ` 'Doug Anderson' via linux-sunxi
2016-02-23 17:35                               ` Doug Anderson
2016-02-23 17:35                               ` Doug Anderson
2016-02-23 17:35                               ` Doug Anderson
     [not found]                               ` <CAD=FV=UvxG3MYD4MKQJqN7W68uMjd-s+FH-e8tkrLCpS0RLmZQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-02-23 18:14                                 ` Thierry Reding
2016-02-23 18:14                                   ` Thierry Reding
2016-02-23 18:14                                   ` Thierry Reding
2016-02-23 18:14                                   ` Thierry Reding
     [not found]                                   ` <20160223181448.GA14754-AwZRO8vwLAwmlAP/+Wk3EA@public.gmane.org>
2016-02-23 18:42                                     ` 'Doug Anderson' via linux-sunxi
2016-02-23 18:42                                       ` Doug Anderson
2016-02-23 18:42                                       ` Doug Anderson
2016-02-23 18:42                                       ` Doug Anderson
2016-02-25 23:14                                       ` Doug Anderson
2016-02-25 23:14                                         ` Doug Anderson
2016-02-25 23:14                                         ` Doug Anderson
2016-02-25 23:14                                         ` Doug Anderson
     [not found]                                         ` <CAD=FV=VckTVD8b1g+f0G2kMeoTjvY0pAGhoDnWQN_dAmqSxBxg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-03-07 16:34                                           ` 'Doug Anderson' via linux-sunxi
2016-03-07 16:34                                             ` Doug Anderson
2016-03-07 16:34                                             ` Doug Anderson
2016-03-07 16:34                                             ` Doug Anderson
     [not found]                                             ` <CAD=FV=W3KPf8tyMviVNB9=HjefMdP+FBbN01Zhh7RKH+gkj2WQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-03-10 17:54                                               ` Thierry Reding
2016-03-10 17:54                                                 ` Thierry Reding
2016-03-10 17:54                                                 ` Thierry Reding
2016-03-10 17:54                                                 ` Thierry Reding
     [not found]                                                 ` <20160310175438.GA5648-AwZRO8vwLAwmlAP/+Wk3EA@public.gmane.org>
2016-03-11  9:51                                                   ` Boris Brezillon
2016-03-11  9:51                                                     ` Boris Brezillon
2016-03-11  9:51                                                     ` Boris Brezillon
2016-03-11  9:51                                                     ` Boris Brezillon
2015-10-19 10:12 ` Heiko Stübner
2015-10-19 10:12 ` Heiko Stübner
2015-10-19 10:12 ` Heiko Stübner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1442828009-6241-8-git-send-email-boris.brezillon@free-electrons.com \
    --to=boris.brezillon-wi1+55scjutkeb57/3fjtnbpr1lh4cv8@public.gmane.org \
    --cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=cooloney-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=daniel-cYrQPVfZoowdnm+yROfE0A@public.gmane.org \
    --cc=dianders-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
    --cc=haojian.zhuang-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org \
    --cc=j.anaszewski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
    --cc=jingoohan1-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-fbdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-leds-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-pwm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
    --cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
    --cc=plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org \
    --cc=robert.jarzmik-GANU6spQydw@public.gmane.org \
    --cc=rpurdie-Fm38FmjxZ/leoWH0uzbU5w@public.gmane.org \
    --cc=thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=tomi.valkeinen-l0cyMroinI0@public.gmane.org \
    --cc=u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.