From: Douglas Anderson <dianders@chromium.org> To: John Youn <John.Youn@synopsys.com> Cc: "Yunzhi Li" <lyz@rock-chips.com>, "Heiko Stübner" <heiko@sntech.de>, linux-rockchip@lists.infradead.org, "Julius Werner" <jwerner@chromium.org>, "Douglas Anderson" <dianders@chromium.org>, johnyoun@synopsys.com, gregkh@linuxfoundation.org, linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 1/5] usb: dwc2: Restore GUSBCFG in dwc2_get_hwparams() Date: Wed, 7 Oct 2015 17:48:37 -0700 [thread overview] Message-ID: <1444265321-16768-2-git-send-email-dianders@chromium.org> (raw) In-Reply-To: <1444265321-16768-1-git-send-email-dianders@chromium.org> Previously dwc2_get_hwparams() was changing GUSBCFG and not putting it back the way it was (specifically it set and cleared FORCEHOSTMODE). Since we want to move dwc2_core_reset() _before_ dwc2_get_hwparams() we should make sure dwc2_get_hwparams() isn't messing with things in a permanent way. Since we're now looking at GUSBCFG, it's obvious that we shouldn't need all the extra delays if FORCEHOSTMODE was already set. This will avoid some delays for any ports that have forced host mode. Signed-off-by: Douglas Anderson <dianders@chromium.org> --- drivers/usb/dwc2/core.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c index bf5e951..43c8bf4 100644 --- a/drivers/usb/dwc2/core.c +++ b/drivers/usb/dwc2/core.c @@ -3097,18 +3097,20 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg) /* Force host mode to get HPTXFSIZ / GNPTXFSIZ exact power on value */ gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG); - gusbcfg |= GUSBCFG_FORCEHOSTMODE; - dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG); - usleep_range(100000, 150000); + if (!(gusbcfg & GUSBCFG_FORCEHOSTMODE)) { + dwc2_writel(gusbcfg | GUSBCFG_FORCEHOSTMODE, + hsotg->regs + GUSBCFG); + usleep_range(100000, 150000); + } gnptxfsiz = dwc2_readl(hsotg->regs + GNPTXFSIZ); hptxfsiz = dwc2_readl(hsotg->regs + HPTXFSIZ); dev_dbg(hsotg->dev, "gnptxfsiz=%08x\n", gnptxfsiz); dev_dbg(hsotg->dev, "hptxfsiz=%08x\n", hptxfsiz); - gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG); - gusbcfg &= ~GUSBCFG_FORCEHOSTMODE; - dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG); - usleep_range(100000, 150000); + if (!(gusbcfg & GUSBCFG_FORCEHOSTMODE)) { + dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG); + usleep_range(100000, 150000); + } /* hwcfg2 */ hw->op_mode = (hwcfg2 & GHWCFG2_OP_MODE_MASK) >> -- 2.6.0.rc2.230.g3dd15c0
WARNING: multiple messages have this Message-ID (diff)
From: Douglas Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org> To: John Youn <John.Youn-HKixBCOQz3hWk0Htik3J/w@public.gmane.org> Cc: "Heiko Stübner" <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>, johnyoun-HKixBCOQz3hWk0Htik3J/w@public.gmane.org, gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org, linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, "Douglas Anderson" <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, "Yunzhi Li" <lyz-TNX95d0MmH7DzftRWevZcw@public.gmane.org>, "Julius Werner" <jwerner-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org> Subject: [PATCH 1/5] usb: dwc2: Restore GUSBCFG in dwc2_get_hwparams() Date: Wed, 7 Oct 2015 17:48:37 -0700 [thread overview] Message-ID: <1444265321-16768-2-git-send-email-dianders@chromium.org> (raw) In-Reply-To: <1444265321-16768-1-git-send-email-dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org> Previously dwc2_get_hwparams() was changing GUSBCFG and not putting it back the way it was (specifically it set and cleared FORCEHOSTMODE). Since we want to move dwc2_core_reset() _before_ dwc2_get_hwparams() we should make sure dwc2_get_hwparams() isn't messing with things in a permanent way. Since we're now looking at GUSBCFG, it's obvious that we shouldn't need all the extra delays if FORCEHOSTMODE was already set. This will avoid some delays for any ports that have forced host mode. Signed-off-by: Douglas Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org> --- drivers/usb/dwc2/core.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c index bf5e951..43c8bf4 100644 --- a/drivers/usb/dwc2/core.c +++ b/drivers/usb/dwc2/core.c @@ -3097,18 +3097,20 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg) /* Force host mode to get HPTXFSIZ / GNPTXFSIZ exact power on value */ gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG); - gusbcfg |= GUSBCFG_FORCEHOSTMODE; - dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG); - usleep_range(100000, 150000); + if (!(gusbcfg & GUSBCFG_FORCEHOSTMODE)) { + dwc2_writel(gusbcfg | GUSBCFG_FORCEHOSTMODE, + hsotg->regs + GUSBCFG); + usleep_range(100000, 150000); + } gnptxfsiz = dwc2_readl(hsotg->regs + GNPTXFSIZ); hptxfsiz = dwc2_readl(hsotg->regs + HPTXFSIZ); dev_dbg(hsotg->dev, "gnptxfsiz=%08x\n", gnptxfsiz); dev_dbg(hsotg->dev, "hptxfsiz=%08x\n", hptxfsiz); - gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG); - gusbcfg &= ~GUSBCFG_FORCEHOSTMODE; - dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG); - usleep_range(100000, 150000); + if (!(gusbcfg & GUSBCFG_FORCEHOSTMODE)) { + dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG); + usleep_range(100000, 150000); + } /* hwcfg2 */ hw->op_mode = (hwcfg2 & GHWCFG2_OP_MODE_MASK) >> -- 2.6.0.rc2.230.g3dd15c0
next prev parent reply other threads:[~2015-10-08 0:49 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-10-08 0:48 [PATCH 0/5] usb: dwc2: fix dwc2_get_hwparams() + optimize probe time a bit Douglas Anderson 2015-10-08 0:48 ` Douglas Anderson 2015-10-08 0:48 ` Douglas Anderson [this message] 2015-10-08 0:48 ` [PATCH 1/5] usb: dwc2: Restore GUSBCFG in dwc2_get_hwparams() Douglas Anderson 2015-10-08 0:48 ` [PATCH 2/5] usb: dwc2: reset dwc2 core before dwc2_get_hwparams() Douglas Anderson 2015-10-08 0:48 ` Douglas Anderson 2015-10-08 0:48 ` [PATCH 3/5] CHROMIUM: usb: dwc2: Avoid double-reset at boot time Douglas Anderson 2015-10-08 0:48 ` Douglas Anderson 2015-10-08 17:34 ` Doug Anderson 2015-10-08 17:34 ` Doug Anderson 2015-10-08 0:48 ` [PATCH 4/5] usb: dwc2: Speed dwc2_get_hwparams() on some host-only ports Douglas Anderson 2015-10-08 0:48 ` Douglas Anderson 2015-10-08 0:48 ` [PATCH 5/5] usb: dwc2: reduce dwc2 driver probe time Douglas Anderson 2015-10-08 0:48 ` Douglas Anderson
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1444265321-16768-2-git-send-email-dianders@chromium.org \ --to=dianders@chromium.org \ --cc=John.Youn@synopsys.com \ --cc=gregkh@linuxfoundation.org \ --cc=heiko@sntech.de \ --cc=johnyoun@synopsys.com \ --cc=jwerner@chromium.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-rockchip@lists.infradead.org \ --cc=linux-usb@vger.kernel.org \ --cc=lyz@rock-chips.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.