From: Yuan Yao <yao.yuan@freescale.com> To: <vinod.koul@intel.com>, <stefan@agner.ch>, <arnd@arndb.de> Cc: <dan.j.williams@intel.com>, <dmaengine@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org> Subject: [PATCH v3] dmaengine: fsl-edma: add PM suspend/resume support Date: Mon, 19 Oct 2015 16:31:05 +0800 [thread overview] Message-ID: <1445243465-7727-1-git-send-email-yao.yuan@freescale.com> (raw) This add power management suspend/resume support for the fsl-edma driver. eDMA acted as a basic function used by others. What it needs to do is the two steps below to support power management. In fsl_edma_suspend_late: Check whether the DMA chan is idle, if it is not idle disable DMA request. In fsl_edma_resume_early: Enable the eDMA and wait for being used. Signed-off-by: Yuan Yao <yao.yuan@freescale.com> --- drivers/dma/fsl-edma.c | 80 ++++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 77 insertions(+), 3 deletions(-) diff --git a/drivers/dma/fsl-edma.c b/drivers/dma/fsl-edma.c index 915eec3..6e28e57 100644 --- a/drivers/dma/fsl-edma.c +++ b/drivers/dma/fsl-edma.c @@ -116,6 +116,10 @@ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) | \ BIT(DMA_SLAVE_BUSWIDTH_8_BYTES) +enum fsl_edma_pm_state { + RUNNING = 0, + SUSPENDED, +}; struct fsl_edma_hw_tcd { __le32 saddr; @@ -147,6 +151,9 @@ struct fsl_edma_slave_config { struct fsl_edma_chan { struct virt_dma_chan vchan; enum dma_status status; + enum fsl_edma_pm_state pm_state; + bool idle; + u32 slave_id; struct fsl_edma_engine *edma; struct fsl_edma_desc *edesc; struct fsl_edma_slave_config fsc; @@ -298,6 +305,7 @@ static int fsl_edma_terminate_all(struct dma_chan *chan) spin_lock_irqsave(&fsl_chan->vchan.lock, flags); fsl_edma_disable_request(fsl_chan); fsl_chan->edesc = NULL; + fsl_chan->idle = true; vchan_get_all_descriptors(&fsl_chan->vchan, &head); spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags); vchan_dma_desc_free_list(&fsl_chan->vchan, &head); @@ -313,6 +321,7 @@ static int fsl_edma_pause(struct dma_chan *chan) if (fsl_chan->edesc) { fsl_edma_disable_request(fsl_chan); fsl_chan->status = DMA_PAUSED; + fsl_chan->idle = true; } spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags); return 0; @@ -327,6 +336,7 @@ static int fsl_edma_resume(struct dma_chan *chan) if (fsl_chan->edesc) { fsl_edma_enable_request(fsl_chan); fsl_chan->status = DMA_IN_PROGRESS; + fsl_chan->idle = false; } spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags); return 0; @@ -648,6 +658,7 @@ static void fsl_edma_xfer_desc(struct fsl_edma_chan *fsl_chan) fsl_edma_set_tcd_regs(fsl_chan, fsl_chan->edesc->tcd[0].vtcd); fsl_edma_enable_request(fsl_chan); fsl_chan->status = DMA_IN_PROGRESS; + fsl_chan->idle = false; } static irqreturn_t fsl_edma_tx_handler(int irq, void *dev_id) @@ -676,6 +687,7 @@ static irqreturn_t fsl_edma_tx_handler(int irq, void *dev_id) vchan_cookie_complete(&fsl_chan->edesc->vdesc); fsl_chan->edesc = NULL; fsl_chan->status = DMA_COMPLETE; + fsl_chan->idle = true; } else { vchan_cyclic_callback(&fsl_chan->edesc->vdesc); } @@ -704,6 +716,7 @@ static irqreturn_t fsl_edma_err_handler(int irq, void *dev_id) edma_writeb(fsl_edma, EDMA_CERR_CERR(ch), fsl_edma->membase + EDMA_CERR); fsl_edma->chans[ch].status = DMA_ERROR; + fsl_edma->chans[ch].idle = true; } } return IRQ_HANDLED; @@ -724,6 +737,12 @@ static void fsl_edma_issue_pending(struct dma_chan *chan) spin_lock_irqsave(&fsl_chan->vchan.lock, flags); + if (unlikely(fsl_chan->pm_state != RUNNING)) { + spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags); + /* cannot submit due to suspend */ + return; + } + if (vchan_issue_pending(&fsl_chan->vchan) && !fsl_chan->edesc) fsl_edma_xfer_desc(fsl_chan); @@ -735,6 +754,7 @@ static struct dma_chan *fsl_edma_xlate(struct of_phandle_args *dma_spec, { struct fsl_edma_engine *fsl_edma = ofdma->of_dma_data; struct dma_chan *chan, *_chan; + struct fsl_edma_chan *fsl_chan; unsigned long chans_per_mux = fsl_edma->n_chans / DMAMUX_NR; if (dma_spec->args_count != 2) @@ -748,8 +768,10 @@ static struct dma_chan *fsl_edma_xlate(struct of_phandle_args *dma_spec, chan = dma_get_slave_channel(chan); if (chan) { chan->device->privatecnt++; - fsl_edma_chan_mux(to_fsl_edma_chan(chan), - dma_spec->args[1], true); + fsl_chan = to_fsl_edma_chan(chan); + fsl_chan->slave_id = dma_spec->args[1]; + fsl_edma_chan_mux(fsl_chan, fsl_chan->slave_id, + true); mutex_unlock(&fsl_edma->fsl_edma_mutex); return chan; } @@ -888,7 +910,9 @@ static int fsl_edma_probe(struct platform_device *pdev) struct fsl_edma_chan *fsl_chan = &fsl_edma->chans[i]; fsl_chan->edma = fsl_edma; - + fsl_chan->pm_state = RUNNING; + fsl_chan->slave_id = 0; + fsl_chan->idle = true; fsl_chan->vchan.desc_free = fsl_edma_free_desc; vchan_init(&fsl_chan->vchan, &fsl_edma->dma_dev); @@ -959,6 +983,55 @@ static int fsl_edma_remove(struct platform_device *pdev) return 0; } +static int fsl_edma_suspend_late(struct device *dev) +{ + struct fsl_edma_engine *fsl_edma = dev_get_drvdata(dev); + struct fsl_edma_chan *fsl_chan; + unsigned long flags; + int i; + + for (i = 0; i < fsl_edma->n_chans; i++) { + fsl_chan = &fsl_edma->chans[i]; + spin_lock_irqsave(&fsl_chan->vchan.lock, flags); + /* Make sure chan is idle or will force disable. */ + if (unlikely(!fsl_chan->idle)) { + dev_warn(dev, "WARN: There is non-idle channel."); + fsl_edma_disable_request(fsl_chan); + fsl_edma_chan_mux(fsl_chan, 0, false); + } + + fsl_chan->pm_state = SUSPENDED; + spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags); + } + + return 0; +} + +static int fsl_edma_resume_early(struct device *dev) +{ + struct fsl_edma_engine *fsl_edma = dev_get_drvdata(dev); + struct fsl_edma_chan *fsl_chan; + int i; + + for (i = 0; i < fsl_edma->n_chans; i++) { + fsl_chan = &fsl_edma->chans[i]; + fsl_chan->pm_state = RUNNING; + edma_writew(fsl_edma, 0x0, fsl_edma->membase + EDMA_TCD_CSR(i)); + if (fsl_chan->slave_id != 0) + fsl_edma_chan_mux(fsl_chan, fsl_chan->slave_id, true); + } + + edma_writel(fsl_edma, EDMA_CR_ERGA | EDMA_CR_ERCA, + fsl_edma->membase + EDMA_CR); + + return 0; +} + +static const struct dev_pm_ops fsl_edma_pm_ops = { + .suspend_late = fsl_edma_suspend_late, + .resume_early = fsl_edma_resume_early, +}; + static const struct of_device_id fsl_edma_dt_ids[] = { { .compatible = "fsl,vf610-edma", }, { /* sentinel */ } @@ -969,6 +1042,7 @@ static struct platform_driver fsl_edma_driver = { .driver = { .name = "fsl-edma", .of_match_table = fsl_edma_dt_ids, + .pm = &fsl_edma_pm_ops, }, .probe = fsl_edma_probe, .remove = fsl_edma_remove, -- 2.1.0.27.g96db324
WARNING: multiple messages have this Message-ID (diff)
From: yao.yuan@freescale.com (Yuan Yao) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v3] dmaengine: fsl-edma: add PM suspend/resume support Date: Mon, 19 Oct 2015 16:31:05 +0800 [thread overview] Message-ID: <1445243465-7727-1-git-send-email-yao.yuan@freescale.com> (raw) This add power management suspend/resume support for the fsl-edma driver. eDMA acted as a basic function used by others. What it needs to do is the two steps below to support power management. In fsl_edma_suspend_late: Check whether the DMA chan is idle, if it is not idle disable DMA request. In fsl_edma_resume_early: Enable the eDMA and wait for being used. Signed-off-by: Yuan Yao <yao.yuan@freescale.com> --- drivers/dma/fsl-edma.c | 80 ++++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 77 insertions(+), 3 deletions(-) diff --git a/drivers/dma/fsl-edma.c b/drivers/dma/fsl-edma.c index 915eec3..6e28e57 100644 --- a/drivers/dma/fsl-edma.c +++ b/drivers/dma/fsl-edma.c @@ -116,6 +116,10 @@ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) | \ BIT(DMA_SLAVE_BUSWIDTH_8_BYTES) +enum fsl_edma_pm_state { + RUNNING = 0, + SUSPENDED, +}; struct fsl_edma_hw_tcd { __le32 saddr; @@ -147,6 +151,9 @@ struct fsl_edma_slave_config { struct fsl_edma_chan { struct virt_dma_chan vchan; enum dma_status status; + enum fsl_edma_pm_state pm_state; + bool idle; + u32 slave_id; struct fsl_edma_engine *edma; struct fsl_edma_desc *edesc; struct fsl_edma_slave_config fsc; @@ -298,6 +305,7 @@ static int fsl_edma_terminate_all(struct dma_chan *chan) spin_lock_irqsave(&fsl_chan->vchan.lock, flags); fsl_edma_disable_request(fsl_chan); fsl_chan->edesc = NULL; + fsl_chan->idle = true; vchan_get_all_descriptors(&fsl_chan->vchan, &head); spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags); vchan_dma_desc_free_list(&fsl_chan->vchan, &head); @@ -313,6 +321,7 @@ static int fsl_edma_pause(struct dma_chan *chan) if (fsl_chan->edesc) { fsl_edma_disable_request(fsl_chan); fsl_chan->status = DMA_PAUSED; + fsl_chan->idle = true; } spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags); return 0; @@ -327,6 +336,7 @@ static int fsl_edma_resume(struct dma_chan *chan) if (fsl_chan->edesc) { fsl_edma_enable_request(fsl_chan); fsl_chan->status = DMA_IN_PROGRESS; + fsl_chan->idle = false; } spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags); return 0; @@ -648,6 +658,7 @@ static void fsl_edma_xfer_desc(struct fsl_edma_chan *fsl_chan) fsl_edma_set_tcd_regs(fsl_chan, fsl_chan->edesc->tcd[0].vtcd); fsl_edma_enable_request(fsl_chan); fsl_chan->status = DMA_IN_PROGRESS; + fsl_chan->idle = false; } static irqreturn_t fsl_edma_tx_handler(int irq, void *dev_id) @@ -676,6 +687,7 @@ static irqreturn_t fsl_edma_tx_handler(int irq, void *dev_id) vchan_cookie_complete(&fsl_chan->edesc->vdesc); fsl_chan->edesc = NULL; fsl_chan->status = DMA_COMPLETE; + fsl_chan->idle = true; } else { vchan_cyclic_callback(&fsl_chan->edesc->vdesc); } @@ -704,6 +716,7 @@ static irqreturn_t fsl_edma_err_handler(int irq, void *dev_id) edma_writeb(fsl_edma, EDMA_CERR_CERR(ch), fsl_edma->membase + EDMA_CERR); fsl_edma->chans[ch].status = DMA_ERROR; + fsl_edma->chans[ch].idle = true; } } return IRQ_HANDLED; @@ -724,6 +737,12 @@ static void fsl_edma_issue_pending(struct dma_chan *chan) spin_lock_irqsave(&fsl_chan->vchan.lock, flags); + if (unlikely(fsl_chan->pm_state != RUNNING)) { + spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags); + /* cannot submit due to suspend */ + return; + } + if (vchan_issue_pending(&fsl_chan->vchan) && !fsl_chan->edesc) fsl_edma_xfer_desc(fsl_chan); @@ -735,6 +754,7 @@ static struct dma_chan *fsl_edma_xlate(struct of_phandle_args *dma_spec, { struct fsl_edma_engine *fsl_edma = ofdma->of_dma_data; struct dma_chan *chan, *_chan; + struct fsl_edma_chan *fsl_chan; unsigned long chans_per_mux = fsl_edma->n_chans / DMAMUX_NR; if (dma_spec->args_count != 2) @@ -748,8 +768,10 @@ static struct dma_chan *fsl_edma_xlate(struct of_phandle_args *dma_spec, chan = dma_get_slave_channel(chan); if (chan) { chan->device->privatecnt++; - fsl_edma_chan_mux(to_fsl_edma_chan(chan), - dma_spec->args[1], true); + fsl_chan = to_fsl_edma_chan(chan); + fsl_chan->slave_id = dma_spec->args[1]; + fsl_edma_chan_mux(fsl_chan, fsl_chan->slave_id, + true); mutex_unlock(&fsl_edma->fsl_edma_mutex); return chan; } @@ -888,7 +910,9 @@ static int fsl_edma_probe(struct platform_device *pdev) struct fsl_edma_chan *fsl_chan = &fsl_edma->chans[i]; fsl_chan->edma = fsl_edma; - + fsl_chan->pm_state = RUNNING; + fsl_chan->slave_id = 0; + fsl_chan->idle = true; fsl_chan->vchan.desc_free = fsl_edma_free_desc; vchan_init(&fsl_chan->vchan, &fsl_edma->dma_dev); @@ -959,6 +983,55 @@ static int fsl_edma_remove(struct platform_device *pdev) return 0; } +static int fsl_edma_suspend_late(struct device *dev) +{ + struct fsl_edma_engine *fsl_edma = dev_get_drvdata(dev); + struct fsl_edma_chan *fsl_chan; + unsigned long flags; + int i; + + for (i = 0; i < fsl_edma->n_chans; i++) { + fsl_chan = &fsl_edma->chans[i]; + spin_lock_irqsave(&fsl_chan->vchan.lock, flags); + /* Make sure chan is idle or will force disable. */ + if (unlikely(!fsl_chan->idle)) { + dev_warn(dev, "WARN: There is non-idle channel."); + fsl_edma_disable_request(fsl_chan); + fsl_edma_chan_mux(fsl_chan, 0, false); + } + + fsl_chan->pm_state = SUSPENDED; + spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags); + } + + return 0; +} + +static int fsl_edma_resume_early(struct device *dev) +{ + struct fsl_edma_engine *fsl_edma = dev_get_drvdata(dev); + struct fsl_edma_chan *fsl_chan; + int i; + + for (i = 0; i < fsl_edma->n_chans; i++) { + fsl_chan = &fsl_edma->chans[i]; + fsl_chan->pm_state = RUNNING; + edma_writew(fsl_edma, 0x0, fsl_edma->membase + EDMA_TCD_CSR(i)); + if (fsl_chan->slave_id != 0) + fsl_edma_chan_mux(fsl_chan, fsl_chan->slave_id, true); + } + + edma_writel(fsl_edma, EDMA_CR_ERGA | EDMA_CR_ERCA, + fsl_edma->membase + EDMA_CR); + + return 0; +} + +static const struct dev_pm_ops fsl_edma_pm_ops = { + .suspend_late = fsl_edma_suspend_late, + .resume_early = fsl_edma_resume_early, +}; + static const struct of_device_id fsl_edma_dt_ids[] = { { .compatible = "fsl,vf610-edma", }, { /* sentinel */ } @@ -969,6 +1042,7 @@ static struct platform_driver fsl_edma_driver = { .driver = { .name = "fsl-edma", .of_match_table = fsl_edma_dt_ids, + .pm = &fsl_edma_pm_ops, }, .probe = fsl_edma_probe, .remove = fsl_edma_remove, -- 2.1.0.27.g96db324
next reply other threads:[~2015-10-19 8:37 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-10-19 8:31 Yuan Yao [this message] 2015-10-19 8:31 ` [PATCH v3] dmaengine: fsl-edma: add PM suspend/resume support Yuan Yao 2015-10-27 2:00 ` Vinod Koul 2015-10-27 2:00 ` Vinod Koul 2015-10-27 3:58 ` Yao Yuan 2015-10-27 3:58 ` Yao Yuan 2015-10-28 6:49 ` Vinod Koul 2015-10-28 6:49 ` Vinod Koul
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1445243465-7727-1-git-send-email-yao.yuan@freescale.com \ --to=yao.yuan@freescale.com \ --cc=arnd@arndb.de \ --cc=dan.j.williams@intel.com \ --cc=dmaengine@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=stefan@agner.ch \ --cc=vinod.koul@intel.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.