From: Zhiqiang Hou <B48286@freescale.com>
To: linux-arm-kernel@lists.infradead.org, catalin.marinas@arm.com,
will.deacon@arm.com, linux-i2c@vger.kernel.org,
linux-watchdog@vger.kernel.org, linux-doc@vger.kernel.org,
linux-clk@vger.kernel.org
Cc: mark.rutland@arm.com, B48286@freescale.com,
Shaohui.Xie@freescale.com, corbet@lwn.net,
bhupesh.sharma@freescale.com, mturquette@baylibre.com,
wsa@the-dreams.de, sboyd@codeaurora.org, wim@iguana.be,
Wenbin.Song@freescale.com, scottwood@freescale.com,
Mingkai.Hu@freescale.com, linux@roeck-us.net
Subject: [PATCH V5 1/6] i2c: Add i2c support to Freescale Layerscape platforms
Date: Mon, 19 Oct 2015 19:56:09 +0800 [thread overview]
Message-ID: <1445255774-32887-1-git-send-email-B48286@freescale.com> (raw)
From: Shaohui Xie <Shaohui.Xie@freescale.com>
Modify the I2C_IMX config to support to Layerscape platforms.
Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Signed-off-by: Wenbin Song <Wenbin.Song@freescale.com>
Signed-off-by: Hou Zhiqiang <B48286@freescale.com>
---
V5: V4 V3 V2
- No change.
drivers/i2c/busses/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 08b8617..14147ec 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -582,10 +582,10 @@ config I2C_IMG
config I2C_IMX
tristate "IMX I2C interface"
- depends on ARCH_MXC
+ depends on ARCH_MXC || ARCH_LAYERSCAPE
help
Say Y here if you want to use the IIC bus controller on
- the Freescale i.MX/MXC processors.
+ the Freescale i.MX/MXC or Layerscape processors.
This driver can also be built as a module. If so, the module
will be called i2c-imx.
--
2.1.0.27.g96db324
WARNING: multiple messages have this Message-ID (diff)
From: Zhiqiang Hou <B48286@freescale.com>
To: <linux-arm-kernel@lists.infradead.org>, <catalin.marinas@arm.com>,
<will.deacon@arm.com>, <linux-i2c@vger.kernel.org>,
<linux-watchdog@vger.kernel.org>, <linux-doc@vger.kernel.org>,
<linux-clk@vger.kernel.org>
Cc: <mark.rutland@arm.com>, <linux@roeck-us.net>, <wsa@the-dreams.de>,
<wim@iguana.be>, <corbet@lwn.net>, <mturquette@baylibre.com>,
<sboyd@codeaurora.org>, <Mingkai.Hu@freescale.com>,
<Shaohui.Xie@freescale.com>, <scottwood@freescale.com>,
<bhupesh.sharma@freescale.com>, <Wenbin.Song@freescale.com>,
<B48286@freescale.com>
Subject: [PATCH V5 1/6] i2c: Add i2c support to Freescale Layerscape platforms
Date: Mon, 19 Oct 2015 19:56:09 +0800 [thread overview]
Message-ID: <1445255774-32887-1-git-send-email-B48286@freescale.com> (raw)
From: Shaohui Xie <Shaohui.Xie@freescale.com>
Modify the I2C_IMX config to support to Layerscape platforms.
Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Signed-off-by: Wenbin Song <Wenbin.Song@freescale.com>
Signed-off-by: Hou Zhiqiang <B48286@freescale.com>
---
V5: V4 V3 V2
- No change.
drivers/i2c/busses/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 08b8617..14147ec 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -582,10 +582,10 @@ config I2C_IMG
config I2C_IMX
tristate "IMX I2C interface"
- depends on ARCH_MXC
+ depends on ARCH_MXC || ARCH_LAYERSCAPE
help
Say Y here if you want to use the IIC bus controller on
- the Freescale i.MX/MXC processors.
+ the Freescale i.MX/MXC or Layerscape processors.
This driver can also be built as a module. If so, the module
will be called i2c-imx.
--
2.1.0.27.g96db324
WARNING: multiple messages have this Message-ID (diff)
From: B48286@freescale.com (Zhiqiang Hou)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V5 1/6] i2c: Add i2c support to Freescale Layerscape platforms
Date: Mon, 19 Oct 2015 19:56:09 +0800 [thread overview]
Message-ID: <1445255774-32887-1-git-send-email-B48286@freescale.com> (raw)
From: Shaohui Xie <Shaohui.Xie@freescale.com>
Modify the I2C_IMX config to support to Layerscape platforms.
Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Signed-off-by: Wenbin Song <Wenbin.Song@freescale.com>
Signed-off-by: Hou Zhiqiang <B48286@freescale.com>
---
V5: V4 V3 V2
- No change.
drivers/i2c/busses/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 08b8617..14147ec 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -582,10 +582,10 @@ config I2C_IMG
config I2C_IMX
tristate "IMX I2C interface"
- depends on ARCH_MXC
+ depends on ARCH_MXC || ARCH_LAYERSCAPE
help
Say Y here if you want to use the IIC bus controller on
- the Freescale i.MX/MXC processors.
+ the Freescale i.MX/MXC or Layerscape processors.
This driver can also be built as a module. If so, the module
will be called i2c-imx.
--
2.1.0.27.g96db324
next reply other threads:[~2015-10-19 11:56 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-19 11:56 Zhiqiang Hou [this message]
2015-10-19 11:56 ` [PATCH V5 1/6] i2c: Add i2c support to Freescale Layerscape platforms Zhiqiang Hou
2015-10-19 11:56 ` Zhiqiang Hou
2015-10-19 11:56 ` [PATCH V5 2/6] watchdog: Add support for " Zhiqiang Hou
2015-10-19 11:56 ` Zhiqiang Hou
2015-10-19 11:56 ` Zhiqiang Hou
2015-10-27 22:28 ` Li Yang
2015-10-19 11:56 ` [PATCH V5 3/6] Documentation: DT: Add entry for FSL LS1043ARDB board Zhiqiang Hou
2015-10-19 11:56 ` Zhiqiang Hou
2015-10-19 11:56 ` Zhiqiang Hou
2015-10-19 11:56 ` [PATCH V5 4/6] arm64/ls1043a: add DTS for Freescale LS1043A SoC Zhiqiang Hou
2015-10-19 11:56 ` Zhiqiang Hou
2015-10-19 11:56 ` Zhiqiang Hou
2015-10-19 11:56 ` [PATCH V5 5/6] clk: qoriq: Add ls1043a support Zhiqiang Hou
2015-10-19 11:56 ` Zhiqiang Hou
2015-10-19 11:56 ` Zhiqiang Hou
2015-10-19 11:56 ` [PATCH V5 6/6] dts/ls1043a: add LS1043ARDB board support Zhiqiang Hou
2015-10-19 11:56 ` Zhiqiang Hou
2015-10-19 11:56 ` Zhiqiang Hou
[not found] ` <1445255774-32887-1-git-send-email-B48286-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2015-10-20 15:52 ` [PATCH V5 1/6] i2c: Add i2c support to Freescale Layerscape platforms Wolfram Sang
2015-10-20 15:52 ` Wolfram Sang
2015-10-20 15:52 ` Wolfram Sang
2015-10-21 4:10 ` Hou Zhiqiang
2015-10-21 4:10 ` Hou Zhiqiang
2015-10-21 4:10 ` Hou Zhiqiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1445255774-32887-1-git-send-email-B48286@freescale.com \
--to=b48286@freescale.com \
--cc=Mingkai.Hu@freescale.com \
--cc=Shaohui.Xie@freescale.com \
--cc=Wenbin.Song@freescale.com \
--cc=bhupesh.sharma@freescale.com \
--cc=catalin.marinas@arm.com \
--cc=corbet@lwn.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=sboyd@codeaurora.org \
--cc=scottwood@freescale.com \
--cc=will.deacon@arm.com \
--cc=wim@iguana.be \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.