All of lore.kernel.org
 help / color / mirror / Atom feed
From: Soren Brinkmann <soren.brinkmann@xilinx.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Jiri Slaby <jslaby@suse.com>
Cc: Michal Simek <michal.simek@xilinx.com>,
	<linux-serial@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>,
	"Soren Brinkmann" <soren.brinkmann@xilinx.com>
Subject: [PATCH 5/9] tty: xuartps: Improve startup function
Date: Tue, 3 Nov 2015 16:20:46 -0800	[thread overview]
Message-ID: <1446596450-20918-6-git-send-email-soren.brinkmann@xilinx.com> (raw)
In-Reply-To: <1446596450-20918-1-git-send-email-soren.brinkmann@xilinx.com>

The startup function is supposed to initialize the UART for receiving.
Hence, don't enable the TX part. Also, protect HW accesses with the port
lock.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
---
 drivers/tty/serial/xilinx_uartps.c | 20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 738df6bb2646..b189e600d4ab 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -755,6 +755,7 @@ static void cdns_uart_set_termios(struct uart_port *port,
  */
 static int cdns_uart_startup(struct uart_port *port)
 {
+	unsigned long flags;
 	unsigned int retval = 0, status = 0;
 
 	retval = request_irq(port->irq, cdns_uart_isr, 0, CDNS_UART_NAME,
@@ -762,6 +763,8 @@ static int cdns_uart_startup(struct uart_port *port)
 	if (retval)
 		return retval;
 
+	spin_lock_irqsave(&port->lock, flags);
+
 	/* Disable the TX and RX */
 	writel(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS,
 			port->membase + CDNS_UART_CR_OFFSET);
@@ -772,15 +775,14 @@ static int cdns_uart_startup(struct uart_port *port)
 	writel(CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST,
 			port->membase + CDNS_UART_CR_OFFSET);
 
-	status = readl(port->membase + CDNS_UART_CR_OFFSET);
-
-	/* Clear the RX disable and TX disable bits and then set the TX enable
-	 * bit and RX enable bit to enable the transmitter and receiver.
+	/*
+	 * Clear the RX disable bit and then set the RX enable bit to enable
+	 * the receiver.
 	 */
-	writel((status & ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS))
-			| (CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN |
-			CDNS_UART_CR_STOPBRK),
-			port->membase + CDNS_UART_CR_OFFSET);
+	status = readl(port->membase + CDNS_UART_CR_OFFSET);
+	status &= CDNS_UART_CR_RX_DIS;
+	status |= CDNS_UART_CR_RX_EN;
+	writel(status, port->membase + CDNS_UART_CR_OFFSET);
 
 	/* Set the Mode Register with normal mode,8 data bits,1 stop bit,
 	 * no parity.
@@ -811,6 +813,8 @@ static int cdns_uart_startup(struct uart_port *port)
 		CDNS_UART_IXR_RXTRIG | CDNS_UART_IXR_TOUT,
 		port->membase + CDNS_UART_IER_OFFSET);
 
+	spin_unlock_irqrestore(&port->lock, flags);
+
 	return retval;
 }
 
-- 
2.6.2.3.ga463a5b


WARNING: multiple messages have this Message-ID (diff)
From: Soren Brinkmann <soren.brinkmann@xilinx.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Jiri Slaby <jslaby@suse.com>
Cc: Michal Simek <michal.simek@xilinx.com>,
	linux-serial@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Soren Brinkmann <soren.brinkmann@xilinx.com>
Subject: [PATCH 5/9] tty: xuartps: Improve startup function
Date: Tue, 3 Nov 2015 16:20:46 -0800	[thread overview]
Message-ID: <1446596450-20918-6-git-send-email-soren.brinkmann@xilinx.com> (raw)
In-Reply-To: <1446596450-20918-1-git-send-email-soren.brinkmann@xilinx.com>

The startup function is supposed to initialize the UART for receiving.
Hence, don't enable the TX part. Also, protect HW accesses with the port
lock.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
---
 drivers/tty/serial/xilinx_uartps.c | 20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 738df6bb2646..b189e600d4ab 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -755,6 +755,7 @@ static void cdns_uart_set_termios(struct uart_port *port,
  */
 static int cdns_uart_startup(struct uart_port *port)
 {
+	unsigned long flags;
 	unsigned int retval = 0, status = 0;
 
 	retval = request_irq(port->irq, cdns_uart_isr, 0, CDNS_UART_NAME,
@@ -762,6 +763,8 @@ static int cdns_uart_startup(struct uart_port *port)
 	if (retval)
 		return retval;
 
+	spin_lock_irqsave(&port->lock, flags);
+
 	/* Disable the TX and RX */
 	writel(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS,
 			port->membase + CDNS_UART_CR_OFFSET);
@@ -772,15 +775,14 @@ static int cdns_uart_startup(struct uart_port *port)
 	writel(CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST,
 			port->membase + CDNS_UART_CR_OFFSET);
 
-	status = readl(port->membase + CDNS_UART_CR_OFFSET);
-
-	/* Clear the RX disable and TX disable bits and then set the TX enable
-	 * bit and RX enable bit to enable the transmitter and receiver.
+	/*
+	 * Clear the RX disable bit and then set the RX enable bit to enable
+	 * the receiver.
 	 */
-	writel((status & ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS))
-			| (CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN |
-			CDNS_UART_CR_STOPBRK),
-			port->membase + CDNS_UART_CR_OFFSET);
+	status = readl(port->membase + CDNS_UART_CR_OFFSET);
+	status &= CDNS_UART_CR_RX_DIS;
+	status |= CDNS_UART_CR_RX_EN;
+	writel(status, port->membase + CDNS_UART_CR_OFFSET);
 
 	/* Set the Mode Register with normal mode,8 data bits,1 stop bit,
 	 * no parity.
@@ -811,6 +813,8 @@ static int cdns_uart_startup(struct uart_port *port)
 		CDNS_UART_IXR_RXTRIG | CDNS_UART_IXR_TOUT,
 		port->membase + CDNS_UART_IER_OFFSET);
 
+	spin_unlock_irqrestore(&port->lock, flags);
+
 	return retval;
 }
 
-- 
2.6.2.3.ga463a5b

WARNING: multiple messages have this Message-ID (diff)
From: soren.brinkmann@xilinx.com (Soren Brinkmann)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 5/9] tty: xuartps: Improve startup function
Date: Tue, 3 Nov 2015 16:20:46 -0800	[thread overview]
Message-ID: <1446596450-20918-6-git-send-email-soren.brinkmann@xilinx.com> (raw)
In-Reply-To: <1446596450-20918-1-git-send-email-soren.brinkmann@xilinx.com>

The startup function is supposed to initialize the UART for receiving.
Hence, don't enable the TX part. Also, protect HW accesses with the port
lock.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
---
 drivers/tty/serial/xilinx_uartps.c | 20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 738df6bb2646..b189e600d4ab 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -755,6 +755,7 @@ static void cdns_uart_set_termios(struct uart_port *port,
  */
 static int cdns_uart_startup(struct uart_port *port)
 {
+	unsigned long flags;
 	unsigned int retval = 0, status = 0;
 
 	retval = request_irq(port->irq, cdns_uart_isr, 0, CDNS_UART_NAME,
@@ -762,6 +763,8 @@ static int cdns_uart_startup(struct uart_port *port)
 	if (retval)
 		return retval;
 
+	spin_lock_irqsave(&port->lock, flags);
+
 	/* Disable the TX and RX */
 	writel(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS,
 			port->membase + CDNS_UART_CR_OFFSET);
@@ -772,15 +775,14 @@ static int cdns_uart_startup(struct uart_port *port)
 	writel(CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST,
 			port->membase + CDNS_UART_CR_OFFSET);
 
-	status = readl(port->membase + CDNS_UART_CR_OFFSET);
-
-	/* Clear the RX disable and TX disable bits and then set the TX enable
-	 * bit and RX enable bit to enable the transmitter and receiver.
+	/*
+	 * Clear the RX disable bit and then set the RX enable bit to enable
+	 * the receiver.
 	 */
-	writel((status & ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS))
-			| (CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN |
-			CDNS_UART_CR_STOPBRK),
-			port->membase + CDNS_UART_CR_OFFSET);
+	status = readl(port->membase + CDNS_UART_CR_OFFSET);
+	status &= CDNS_UART_CR_RX_DIS;
+	status |= CDNS_UART_CR_RX_EN;
+	writel(status, port->membase + CDNS_UART_CR_OFFSET);
 
 	/* Set the Mode Register with normal mode,8 data bits,1 stop bit,
 	 * no parity.
@@ -811,6 +813,8 @@ static int cdns_uart_startup(struct uart_port *port)
 		CDNS_UART_IXR_RXTRIG | CDNS_UART_IXR_TOUT,
 		port->membase + CDNS_UART_IER_OFFSET);
 
+	spin_unlock_irqrestore(&port->lock, flags);
+
 	return retval;
 }
 
-- 
2.6.2.3.ga463a5b

  parent reply	other threads:[~2015-11-04  0:22 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-04  0:20 [PATCH 0/9] tty: xuartps: Fix lock ups Soren Brinkmann
2015-11-04  0:20 ` Soren Brinkmann
2015-11-04  0:20 ` Soren Brinkmann
2015-11-04  0:20 ` [PATCH 1/9] tty: xuartps: Beautify read-modify writes Soren Brinkmann
2015-11-04  0:20   ` Soren Brinkmann
2015-11-04  0:20   ` Soren Brinkmann
2015-11-04  0:20 ` [PATCH 2/9] tty: xuartps: Use spinlock to serialize HW access Soren Brinkmann
2015-11-04  0:20   ` Soren Brinkmann
2015-11-04  0:20   ` Soren Brinkmann
2015-11-04  0:52   ` kbuild test robot
2015-11-04  0:52     ` kbuild test robot
2015-11-04  0:52     ` kbuild test robot
2015-11-04  0:20 ` [PATCH 3/9] tty: xuartps: Always enable transmitter in start_tx Soren Brinkmann
2015-11-04  0:20   ` Soren Brinkmann
2015-11-04  0:20   ` Soren Brinkmann
2015-11-04  0:20 ` [PATCH 4/9] tty: xuartps: Clear interrupt status register in shutdown Soren Brinkmann
2015-11-04  0:20   ` Soren Brinkmann
2015-11-04  0:20   ` Soren Brinkmann
2015-11-04  0:20 ` Soren Brinkmann [this message]
2015-11-04  0:20   ` [PATCH 5/9] tty: xuartps: Improve startup function Soren Brinkmann
2015-11-04  0:20   ` Soren Brinkmann
2015-11-04  0:20 ` [PATCH 6/9] tty: xuartps: Keep lock for whole ISR Soren Brinkmann
2015-11-04  0:20   ` Soren Brinkmann
2015-11-04  0:20   ` Soren Brinkmann
2015-11-04  0:20 ` [PATCH 7/9] tty: xuartps: Acquire port lock for shutdown Soren Brinkmann
2015-11-04  0:20   ` Soren Brinkmann
2015-11-04  0:20   ` Soren Brinkmann
2015-11-04  0:20 ` [PATCH 8/9] tty: xuartps: Move RX path into helper function Soren Brinkmann
2015-11-04  0:20   ` Soren Brinkmann
2015-11-04  0:20   ` Soren Brinkmann
2015-11-04  0:20 ` [PATCH 9/9] tty: xuartps: Only handle RX IRQs when RX is enabled Soren Brinkmann
2015-11-04  0:20   ` Soren Brinkmann
2015-11-04  0:20   ` Soren Brinkmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1446596450-20918-6-git-send-email-soren.brinkmann@xilinx.com \
    --to=soren.brinkmann@xilinx.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jslaby@suse.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=michal.simek@xilinx.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.