From: Bartosz Markowski <bartosz.markowski@tieto.com> To: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org, Bartosz Markowski <bartosz.markowski@tieto.com> Subject: [PATCH 4/4] ath10k: add QCA9377 hw1.0 support Date: Wed, 4 Nov 2015 12:53:35 +0100 [thread overview] Message-ID: <1446638015-23310-5-git-send-email-bartosz.markowski@tieto.com> (raw) In-Reply-To: <1446638015-23310-1-git-send-email-bartosz.markowski@tieto.com> Add new BMI target version and chip id revision. Register it on supported chips list. Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> --- drivers/net/wireless/ath/ath10k/core.c | 18 ++++++++++++++++++ drivers/net/wireless/ath/ath10k/hw.h | 3 +++ drivers/net/wireless/ath/ath10k/pci.c | 2 ++ 3 files changed, 23 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index b80b8f372354..f41329617ae4 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -160,6 +160,24 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .board_ext_size = QCA99X0_BOARD_EXT_DATA_SZ, }, }, + { + .id = QCA9377_HW_1_0_DEV_VERSION, + .dev_id = QCA9377_1_0_DEVICE_ID, + .name = "qca9377 hw1.0", + .patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR, + .uart_pin = 6, + .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, + .max_probe_resp_desc_thres = 0, + .fw = { + .dir = QCA9377_HW_1_0_FW_DIR, + .fw = QCA9377_HW_1_0_FW_FILE, + .otp = QCA9377_HW_1_0_OTP_FILE, + .board = QCA9377_HW_1_0_BOARD_DATA_FILE, + .board_size = QCA9377_BOARD_DATA_SZ, + .board_ext_size = QCA9377_BOARD_EXT_DATA_SZ, + }, + }, { .id = QCA9377_HW_1_1_DEV_VERSION, .dev_id = QCA9377_1_0_DEVICE_ID, diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h index 13aacbdc98e6..713c2bcea178 100644 --- a/drivers/net/wireless/ath/ath10k/hw.h +++ b/drivers/net/wireless/ath/ath10k/hw.h @@ -48,6 +48,8 @@ #define QCA6174_HW_3_0_VERSION 0x05020000 #define QCA6174_HW_3_2_VERSION 0x05030000 +/* QCA9377 target BMI version signatures */ +#define QCA9377_HW_1_0_DEV_VERSION 0x05020000 #define QCA9377_HW_1_1_DEV_VERSION 0x05020001 enum qca6174_pci_rev { @@ -69,6 +71,7 @@ enum qca6174_chip_id_rev { }; enum qca9377_chip_id_rev { + QCA9377_HW_1_0_CHIP_ID_REV = 0x0, QCA9377_HW_1_1_CHIP_ID_REV = 0x1, }; diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index 14dce2a1b39f..679a3ebb34af 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -86,6 +86,8 @@ static const struct ath10k_pci_supp_chip ath10k_pci_supp_chips[] = { { QCA6174_2_1_DEVICE_ID, QCA6174_HW_3_2_CHIP_ID_REV }, { QCA99X0_2_0_DEVICE_ID, QCA99X0_HW_2_0_CHIP_ID_REV }, + + { QCA9377_1_0_DEVICE_ID, QCA9377_HW_1_0_CHIP_ID_REV }, { QCA9377_1_0_DEVICE_ID, QCA9377_HW_1_1_CHIP_ID_REV }, }; -- 2.1.2
WARNING: multiple messages have this Message-ID (diff)
From: Bartosz Markowski <bartosz.markowski@tieto.com> To: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org, Bartosz Markowski <bartosz.markowski@tieto.com> Subject: [PATCH 4/4] ath10k: add QCA9377 hw1.0 support Date: Wed, 4 Nov 2015 12:53:35 +0100 [thread overview] Message-ID: <1446638015-23310-5-git-send-email-bartosz.markowski@tieto.com> (raw) In-Reply-To: <1446638015-23310-1-git-send-email-bartosz.markowski@tieto.com> Add new BMI target version and chip id revision. Register it on supported chips list. Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> --- drivers/net/wireless/ath/ath10k/core.c | 18 ++++++++++++++++++ drivers/net/wireless/ath/ath10k/hw.h | 3 +++ drivers/net/wireless/ath/ath10k/pci.c | 2 ++ 3 files changed, 23 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index b80b8f372354..f41329617ae4 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -160,6 +160,24 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .board_ext_size = QCA99X0_BOARD_EXT_DATA_SZ, }, }, + { + .id = QCA9377_HW_1_0_DEV_VERSION, + .dev_id = QCA9377_1_0_DEVICE_ID, + .name = "qca9377 hw1.0", + .patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR, + .uart_pin = 6, + .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, + .max_probe_resp_desc_thres = 0, + .fw = { + .dir = QCA9377_HW_1_0_FW_DIR, + .fw = QCA9377_HW_1_0_FW_FILE, + .otp = QCA9377_HW_1_0_OTP_FILE, + .board = QCA9377_HW_1_0_BOARD_DATA_FILE, + .board_size = QCA9377_BOARD_DATA_SZ, + .board_ext_size = QCA9377_BOARD_EXT_DATA_SZ, + }, + }, { .id = QCA9377_HW_1_1_DEV_VERSION, .dev_id = QCA9377_1_0_DEVICE_ID, diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h index 13aacbdc98e6..713c2bcea178 100644 --- a/drivers/net/wireless/ath/ath10k/hw.h +++ b/drivers/net/wireless/ath/ath10k/hw.h @@ -48,6 +48,8 @@ #define QCA6174_HW_3_0_VERSION 0x05020000 #define QCA6174_HW_3_2_VERSION 0x05030000 +/* QCA9377 target BMI version signatures */ +#define QCA9377_HW_1_0_DEV_VERSION 0x05020000 #define QCA9377_HW_1_1_DEV_VERSION 0x05020001 enum qca6174_pci_rev { @@ -69,6 +71,7 @@ enum qca6174_chip_id_rev { }; enum qca9377_chip_id_rev { + QCA9377_HW_1_0_CHIP_ID_REV = 0x0, QCA9377_HW_1_1_CHIP_ID_REV = 0x1, }; diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index 14dce2a1b39f..679a3ebb34af 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -86,6 +86,8 @@ static const struct ath10k_pci_supp_chip ath10k_pci_supp_chips[] = { { QCA6174_2_1_DEVICE_ID, QCA6174_HW_3_2_CHIP_ID_REV }, { QCA99X0_2_0_DEVICE_ID, QCA99X0_HW_2_0_CHIP_ID_REV }, + + { QCA9377_1_0_DEVICE_ID, QCA9377_HW_1_0_CHIP_ID_REV }, { QCA9377_1_0_DEVICE_ID, QCA9377_HW_1_1_CHIP_ID_REV }, }; -- 2.1.2 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2015-11-04 11:53 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-11-04 11:53 [PATCH 0/4] update ath10k support for QCA9377 chips Bartosz Markowski 2015-11-04 11:53 ` Bartosz Markowski 2015-11-04 11:53 ` [PATCH 1/4] ath10k: fix the currently supported QCA9377 target version name Bartosz Markowski 2015-11-04 11:53 ` Bartosz Markowski 2015-11-04 11:53 ` [PATCH 2/4] ath10k: update missing hw_params of QCA9377 hw1.1 Bartosz Markowski 2015-11-04 11:53 ` Bartosz Markowski 2015-11-04 11:53 ` [PATCH 3/4] ath10k: introduce dev_id to hw_params Bartosz Markowski 2015-11-04 11:53 ` Bartosz Markowski 2015-11-04 11:53 ` Bartosz Markowski [this message] 2015-11-04 11:53 ` [PATCH 4/4] ath10k: add QCA9377 hw1.0 support Bartosz Markowski 2015-11-04 17:53 ` Kalle Valo 2015-11-04 17:53 ` Kalle Valo 2015-11-05 8:54 ` Bartosz Markowski 2015-11-05 8:54 ` Bartosz Markowski
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1446638015-23310-5-git-send-email-bartosz.markowski@tieto.com \ --to=bartosz.markowski@tieto.com \ --cc=ath10k@lists.infradead.org \ --cc=linux-wireless@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.