All of lore.kernel.org
 help / color / mirror / Atom feed
From: Yetunde Adebisi <yetundex.adebisi@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Yetunde Adebisi <yetundex.adebisi@intel.com>,
	Jani Nikula <jani.nikula@intel.com>
Subject: [PATCH] drm/i915: Add Backlight Control using DPCD for eDP connectors (v2)
Date: Mon,  9 Nov 2015 18:10:48 +0000	[thread overview]
Message-ID: <1447092648-24700-1-git-send-email-yetundex.adebisi@intel.com> (raw)

This patch adds support for eDP backlight control using DPCD registers to
backlight hooks in intel_panel.

It checks for backlight control over AUX channel capability and sets up
function pointers to get and set the backlight brightness level if
supported.

v2: Moved backlight functions from intel_dp.c into a new file
intel_dp_aux_backlight.c. Also moved reading of eDP display control
registers to intel_dp_get_dpcd

This patch depends on http://patchwork.freedesktop.org/patch/64253/

Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Yetunde Adebisi <yetundex.adebisi@intel.com>
---
 drivers/gpu/drm/i915/Makefile                 |   1 +
 drivers/gpu/drm/i915/intel_dp.c               |  16 ++-
 drivers/gpu/drm/i915/intel_dp_aux_backlight.c | 178 ++++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_drv.h              |   6 +
 drivers/gpu/drm/i915/intel_panel.c            |   4 +
 5 files changed, 199 insertions(+), 6 deletions(-)
 create mode 100644 drivers/gpu/drm/i915/intel_dp_aux_backlight.c

diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 0851de07..7a1db3d 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -77,6 +77,7 @@ i915-y += dvo_ch7017.o \
 	  dvo_tfp410.o \
 	  intel_crt.o \
 	  intel_ddi.o \
+	  intel_dp_aux_backlight.o\
 	  intel_dp_link_training.o \
 	  intel_dp_mst.o \
 	  intel_dp.o \
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 5264887..251e869 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -3021,7 +3021,7 @@ static void chv_dp_post_pll_disable(struct intel_encoder *encoder)
  * Sinks are *supposed* to come up within 1ms from an off state, but we're also
  * supposed to retry 3 times per the spec.
  */
-static ssize_t
+ssize_t
 intel_dp_dpcd_read_wake(struct drm_dp_aux *aux, unsigned int offset,
 			void *buffer, size_t size)
 {
@@ -3675,7 +3675,6 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
 	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
 	struct drm_device *dev = dig_port->base.base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	uint8_t rev;
 
 	if (intel_dp_dpcd_read_wake(&intel_dp->aux, 0x000, intel_dp->dpcd,
 				    sizeof(intel_dp->dpcd)) < 0)
@@ -3711,6 +3710,14 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
 			DRM_DEBUG_KMS("PSR2 %s on sink",
 				dev_priv->psr.psr2_support ? "supported" : "not supported");
 		}
+
+		/* Read the eDP Display control capabilities registers */
+		if ((intel_dp->dpcd[DP_EDP_CONFIGURATION_CAP] & DP_DPCD_DISPLAY_CONTROL_CAPABLE) &&
+				(intel_dp_dpcd_read_wake(&intel_dp->aux, DP_EDP_DPCD_REV,
+						intel_dp->dpcd_edp, sizeof(intel_dp->dpcd_edp)) ==
+								sizeof(intel_dp->dpcd_edp)))
+			DRM_DEBUG_KMS("EDP DPCD : %*ph\n", (int) sizeof(intel_dp->dpcd_edp),
+					intel_dp->dpcd_edp);
 	}
 
 	DRM_DEBUG_KMS("Display Port TPS3 support: source %s, sink %s\n",
@@ -3718,10 +3725,7 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
 		      yesno(drm_dp_tps3_supported(intel_dp->dpcd)));
 
 	/* Intermediate frequency support */
-	if (is_edp(intel_dp) &&
-	    (intel_dp->dpcd[DP_EDP_CONFIGURATION_CAP] &	DP_DPCD_DISPLAY_CONTROL_CAPABLE) &&
-	    (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_EDP_DPCD_REV, &rev, 1) == 1) &&
-	    (rev >= 0x03)) { /* eDp v1.4 or higher */
+	if (is_edp(intel_dp) && (intel_dp->dpcd_edp[0] >= 0x03)) { /* eDp v1.4 or higher */
 		__le16 sink_rates[DP_MAX_SUPPORTED_RATES];
 		int i;
 
diff --git a/drivers/gpu/drm/i915/intel_dp_aux_backlight.c b/drivers/gpu/drm/i915/intel_dp_aux_backlight.c
new file mode 100644
index 0000000..ec5fd09
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_dp_aux_backlight.c
@@ -0,0 +1,178 @@
+/*
+ * Copyright © 2015 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+
+#include "intel_drv.h"
+
+static bool is_aux_backlight_enabled(struct drm_dp_aux *aux)
+{
+	uint8_t read_val = 0;
+
+	if (intel_dp_dpcd_read_wake(aux, DP_EDP_DISPLAY_CONTROL_REGISTER,
+			&read_val, sizeof(read_val)) < 0)
+		DRM_DEBUG_KMS("Failed to read DPCD register 0x%x\n",
+				DP_EDP_DISPLAY_CONTROL_REGISTER);
+
+	return read_val & DP_EDP_BACKLIGHT_ENABLE;
+}
+
+static void set_aux_backlight_enable(struct intel_dp *intel_dp, bool enable)
+{
+	uint8_t reg_val = 0;
+
+	if (intel_dp_dpcd_read_wake(&intel_dp->aux,
+				DP_EDP_DISPLAY_CONTROL_REGISTER,
+				&reg_val, sizeof(reg_val)) < 0) {
+		DRM_DEBUG_KMS("Failed to read DPCD register 0x%x\n",
+				DP_EDP_DISPLAY_CONTROL_REGISTER);
+		return;
+	}
+	if (enable)
+		reg_val |= DP_EDP_BACKLIGHT_ENABLE;
+	else
+		reg_val &= ~(DP_EDP_BACKLIGHT_ENABLE);
+
+	if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_DISPLAY_CONTROL_REGISTER,
+			reg_val) < 0) {
+		DRM_DEBUG_KMS("Failed to %s aux backlight\n",
+				enable ? "enable" : "disable");
+	}
+}
+
+/*
+ * Read the current backlight value from DPCD register(s) based
+ * on if 8-bit(MSB) or 16-bit(MSB and LSB) values are supported
+ */
+static uint32_t intel_dp_aux_get_backlight(struct intel_connector *connector)
+{
+	struct intel_dp *intel_dp = enc_to_intel_dp(&connector->encoder->base);
+	uint8_t read_val[2] = { 0x0 };
+	uint16_t level = 0;
+
+	if (intel_dp_dpcd_read_wake(&intel_dp->aux,
+			DP_EDP_BACKLIGHT_BRIGHTNESS_MSB,
+			&read_val, sizeof(read_val)) < 0) {
+		DRM_DEBUG_KMS("Failed to read DPCD register 0x%x\n",
+				DP_EDP_BACKLIGHT_BRIGHTNESS_MSB);
+		return 0;
+	}
+	level = read_val[0];
+	if (intel_dp->dpcd_edp[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT) {
+		level = (read_val[0] << 8 | read_val[1]);
+	}
+
+	return level;
+}
+
+/*
+ * Sends the current backlight level over the aux channel, checking if its using
+ * 8-bit or 16 bit value (MSB and LSB)
+ */
+static void
+intel_dp_aux_set_backlight(struct intel_connector *connector, u32 level)
+{
+	struct intel_dp *intel_dp = enc_to_intel_dp(&connector->encoder->base);
+	uint8_t vals[2] = { 0x0 };
+
+	DRM_DEBUG_KMS("Level 0x%x\n", level);
+	vals[0] = level;
+
+	/* Write the MSB and/or LSB */
+	 if (intel_dp->dpcd_edp[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT) {
+		vals[0] = (level & 0xFF00) >> 8;
+		vals[1] = (level & 0xFF);
+	}
+	if (drm_dp_dpcd_write(&intel_dp->aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB,
+			vals, sizeof(vals)) < 0) {
+		DRM_DEBUG_KMS("Failed to write aux backlight level\n");
+		return;
+	}
+}
+
+static void intel_dp_aux_enable_backlight(struct intel_connector *connector)
+{
+	set_aux_backlight_enable(enc_to_intel_dp(&connector->encoder->base), true);
+}
+
+static void intel_dp_aux_disable_backlight(struct intel_connector *connector)
+{
+	set_aux_backlight_enable(enc_to_intel_dp(&connector->encoder->base), false);
+}
+
+static int intel_dp_aux_setup_backlight(struct intel_connector *connector,
+			enum pipe pipe)
+{
+	struct intel_dp *intel_dp = enc_to_intel_dp(&connector->encoder->base);
+	struct intel_panel *panel = &connector->panel;
+
+	if (intel_dp->dpcd_edp[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT)
+		panel->backlight.max = 0xFFFF;
+	else
+		panel->backlight.max = 0xFF;
+
+	panel->backlight.min = 0;
+
+	panel->backlight.level = intel_dp_aux_get_backlight(connector);
+	panel->backlight.enabled = is_aux_backlight_enabled(&intel_dp->aux);
+
+	return 0;
+}
+
+static bool intel_dp_aux_display_control_capable(struct intel_connector *connector)
+{
+	struct intel_dp *intel_dp = enc_to_intel_dp(&connector->encoder->base);
+	uint8_t dpcd_buf = 0;
+
+	/* Check the  eDP Display control capabilities registers to determine if
+	 * the panel can support backlight control over the aux channel*/
+
+	if (intel_dp->dpcd_edp[1] & DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP &&
+			(intel_dp->dpcd_edp[1] & DP_EDP_BACKLIGHT_AUX_ENABLE_CAP) &&
+			(intel_dp->dpcd_edp[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP) &&
+			((intel_dp_dpcd_read_wake(&intel_dp->aux,
+					DP_EDP_BACKLIGHT_MODE_SET_REGISTER, &dpcd_buf, 1) == 1) &&
+					((dpcd_buf & DP_EDP_BACKLIGHT_CONTROL_MODE_MASK) ==
+							DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD))) {
+
+		DRM_DEBUG_KMS("AUX Backlight Control Supported!\n");
+
+		return true;
+	}
+	return false;
+}
+
+int intel_dp_aux_init_backlight_funcs(struct intel_connector *intel_connector)
+{
+	struct intel_panel *panel = &intel_connector->panel;
+
+	if(!intel_dp_aux_display_control_capable(intel_connector))
+		return -ENODEV;
+
+	panel->backlight.setup = intel_dp_aux_setup_backlight;
+	panel->backlight.enable = intel_dp_aux_enable_backlight;
+	panel->backlight.disable = intel_dp_aux_disable_backlight;
+	panel->backlight.set = intel_dp_aux_set_backlight;
+	panel->backlight.get = intel_dp_aux_get_backlight;
+
+	return 0;
+}
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 92518b4..d193e76 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -757,6 +757,7 @@ struct intel_dp {
 	uint8_t dpcd[DP_RECEIVER_CAP_SIZE];
 	uint8_t psr_dpcd[EDP_PSR_RECEIVER_CAP_SIZE];
 	uint8_t downstream_ports[DP_MAX_DOWNSTREAM_PORTS];
+	uint8_t dpcd_edp[EDP_DISPLAY_CTL_CAP_SIZE];
 	/* sink rates as reported by DP_SUPPORTED_LINK_RATES */
 	uint8_t num_sink_rates;
 	int sink_rates[DP_MAX_SUPPORTED_RATES];
@@ -1254,6 +1255,11 @@ void intel_edp_drrs_flush(struct drm_device *dev, unsigned frontbuffer_bits);
 bool intel_digital_port_connected(struct drm_i915_private *dev_priv,
 					 struct intel_digital_port *port);
 void hsw_dp_set_ddi_pll_sel(struct intel_crtc_state *pipe_config);
+ssize_t intel_dp_dpcd_read_wake(struct drm_dp_aux *aux, unsigned int offset,
+		void *buffer, size_t size);
+
+/* intel_dp_aux_backlight.c */
+int intel_dp_aux_init_backlight_funcs(struct intel_connector *intel_connector);
 
 void
 intel_dp_program_link_training_pattern(struct intel_dp *intel_dp,
diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index a24df35..fa3c67b 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -1744,6 +1744,10 @@ intel_panel_init_backlight_funcs(struct intel_panel *panel)
 	struct drm_device *dev = intel_connector->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
+	if (intel_connector->base.connector_type == DRM_MODE_CONNECTOR_eDP &&
+				intel_dp_aux_init_backlight_funcs(intel_connector) == 0)
+			return;
+
 	if (IS_BROXTON(dev)) {
 		panel->backlight.setup = bxt_setup_backlight;
 		panel->backlight.enable = bxt_enable_backlight;
-- 
1.9.3

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

                 reply	other threads:[~2015-11-09 18:11 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1447092648-24700-1-git-send-email-yetundex.adebisi@intel.com \
    --to=yetundex.adebisi@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.