All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vishal Verma <vishal.l.verma@intel.com>
To: linux-nvdimm@lists.01.org
Cc: Vishal Verma <vishal.l.verma@intel.com>,
	linux-block@vger.kernel.org, linux-raid@vger.kernel.org,
	linux-scsi@vger.kernel.org, Jens Axboe <axboe@fb.com>,
	NeilBrown <neilb@suse.com>, Jeff Moyer <jmoyer@redhat.com>
Subject: [PATCH 3/3] md: convert to use the generic badblocks code
Date: Fri, 20 Nov 2015 17:49:20 -0700	[thread overview]
Message-ID: <1448066960-20119-4-git-send-email-vishal.l.verma@intel.com> (raw)
In-Reply-To: <1448066960-20119-1-git-send-email-vishal.l.verma@intel.com>

Retain badblocks as part of rdev, but use the accessor functions from
include/linux/badblocks for all manipulation.

Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
---
 drivers/md/md.c | 495 +++-----------------------------------------------------
 drivers/md/md.h |  31 +---
 2 files changed, 21 insertions(+), 505 deletions(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index c702de1..82994d7 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -34,6 +34,7 @@
 
 #include <linux/kthread.h>
 #include <linux/blkdev.h>
+#include <linux/badblocks.h>
 #include <linux/sysctl.h>
 #include <linux/seq_file.h>
 #include <linux/fs.h>
@@ -1358,8 +1359,6 @@ static __le32 calc_sb_1_csum(struct mdp_superblock_1 *sb)
 	return cpu_to_le32(csum);
 }
 
-static int md_set_badblocks(struct badblocks *bb, sector_t s, int sectors,
-			    int acknowledged);
 static int super_1_load(struct md_rdev *rdev, struct md_rdev *refdev, int minor_version)
 {
 	struct mdp_superblock_1 *sb;
@@ -1484,7 +1483,7 @@ static int super_1_load(struct md_rdev *rdev, struct md_rdev *refdev, int minor_
 			count <<= sb->bblog_shift;
 			if (bb + 1 == 0)
 				break;
-			if (md_set_badblocks(&rdev->badblocks,
+			if (badblocks_set(&rdev->badblocks,
 					     sector, count, 1) == 0)
 				return -EINVAL;
 		}
@@ -2226,7 +2225,7 @@ repeat:
 			rdev_for_each(rdev, mddev) {
 				if (rdev->badblocks.changed) {
 					rdev->badblocks.changed = 0;
-					md_ack_all_badblocks(&rdev->badblocks);
+					ack_all_badblocks(&rdev->badblocks);
 					md_error(mddev, rdev);
 				}
 				clear_bit(Blocked, &rdev->flags);
@@ -2352,7 +2351,7 @@ repeat:
 			clear_bit(Blocked, &rdev->flags);
 
 		if (any_badblocks_changed)
-			md_ack_all_badblocks(&rdev->badblocks);
+			ack_all_badblocks(&rdev->badblocks);
 		clear_bit(BlockedBadBlocks, &rdev->flags);
 		wake_up(&rdev->blocked_wait);
 	}
@@ -2944,11 +2943,17 @@ static ssize_t recovery_start_store(struct md_rdev *rdev, const char *buf, size_
 static struct rdev_sysfs_entry rdev_recovery_start =
 __ATTR(recovery_start, S_IRUGO|S_IWUSR, recovery_start_show, recovery_start_store);
 
-static ssize_t
-badblocks_show(struct badblocks *bb, char *page, int unack);
-static ssize_t
-badblocks_store(struct badblocks *bb, const char *page, size_t len, int unack);
-
+/* sysfs access to bad-blocks list.
+ * We present two files.
+ * 'bad-blocks' lists sector numbers and lengths of ranges that
+ *    are recorded as bad.  The list is truncated to fit within
+ *    the one-page limit of sysfs.
+ *    Writing "sector length" to this file adds an acknowledged
+ *    bad block list.
+ * 'unacknowledged-bad-blocks' lists bad blocks that have not yet
+ *    been acknowledged.  Writing to this file adds bad blocks
+ *    without acknowledging them.  This is largely for testing.
+ */
 static ssize_t bb_show(struct md_rdev *rdev, char *page)
 {
 	return badblocks_show(&rdev->badblocks, page, 0);
@@ -8348,253 +8353,7 @@ void md_finish_reshape(struct mddev *mddev)
 }
 EXPORT_SYMBOL(md_finish_reshape);
 
-/* Bad block management.
- * We can record which blocks on each device are 'bad' and so just
- * fail those blocks, or that stripe, rather than the whole device.
- * Entries in the bad-block table are 64bits wide.  This comprises:
- * Length of bad-range, in sectors: 0-511 for lengths 1-512
- * Start of bad-range, sector offset, 54 bits (allows 8 exbibytes)
- *  A 'shift' can be set so that larger blocks are tracked and
- *  consequently larger devices can be covered.
- * 'Acknowledged' flag - 1 bit. - the most significant bit.
- *
- * Locking of the bad-block table uses a seqlock so md_is_badblock
- * might need to retry if it is very unlucky.
- * We will sometimes want to check for bad blocks in a bi_end_io function,
- * so we use the write_seqlock_irq variant.
- *
- * When looking for a bad block we specify a range and want to
- * know if any block in the range is bad.  So we binary-search
- * to the last range that starts at-or-before the given endpoint,
- * (or "before the sector after the target range")
- * then see if it ends after the given start.
- * We return
- *  0 if there are no known bad blocks in the range
- *  1 if there are known bad block which are all acknowledged
- * -1 if there are bad blocks which have not yet been acknowledged in metadata.
- * plus the start/length of the first bad section we overlap.
- */
-int md_is_badblock(struct badblocks *bb, sector_t s, int sectors,
-		   sector_t *first_bad, int *bad_sectors)
-{
-	int hi;
-	int lo;
-	u64 *p = bb->page;
-	int rv;
-	sector_t target = s + sectors;
-	unsigned seq;
-
-	if (bb->shift > 0) {
-		/* round the start down, and the end up */
-		s >>= bb->shift;
-		target += (1<<bb->shift) - 1;
-		target >>= bb->shift;
-		sectors = target - s;
-	}
-	/* 'target' is now the first block after the bad range */
-
-retry:
-	seq = read_seqbegin(&bb->lock);
-	lo = 0;
-	rv = 0;
-	hi = bb->count;
-
-	/* Binary search between lo and hi for 'target'
-	 * i.e. for the last range that starts before 'target'
-	 */
-	/* INVARIANT: ranges before 'lo' and at-or-after 'hi'
-	 * are known not to be the last range before target.
-	 * VARIANT: hi-lo is the number of possible
-	 * ranges, and decreases until it reaches 1
-	 */
-	while (hi - lo > 1) {
-		int mid = (lo + hi) / 2;
-		sector_t a = BB_OFFSET(p[mid]);
-		if (a < target)
-			/* This could still be the one, earlier ranges
-			 * could not. */
-			lo = mid;
-		else
-			/* This and later ranges are definitely out. */
-			hi = mid;
-	}
-	/* 'lo' might be the last that started before target, but 'hi' isn't */
-	if (hi > lo) {
-		/* need to check all range that end after 's' to see if
-		 * any are unacknowledged.
-		 */
-		while (lo >= 0 &&
-		       BB_OFFSET(p[lo]) + BB_LEN(p[lo]) > s) {
-			if (BB_OFFSET(p[lo]) < target) {
-				/* starts before the end, and finishes after
-				 * the start, so they must overlap
-				 */
-				if (rv != -1 && BB_ACK(p[lo]))
-					rv = 1;
-				else
-					rv = -1;
-				*first_bad = BB_OFFSET(p[lo]);
-				*bad_sectors = BB_LEN(p[lo]);
-			}
-			lo--;
-		}
-	}
-
-	if (read_seqretry(&bb->lock, seq))
-		goto retry;
-
-	return rv;
-}
-EXPORT_SYMBOL_GPL(md_is_badblock);
-
-/*
- * Add a range of bad blocks to the table.
- * This might extend the table, or might contract it
- * if two adjacent ranges can be merged.
- * We binary-search to find the 'insertion' point, then
- * decide how best to handle it.
- */
-static int md_set_badblocks(struct badblocks *bb, sector_t s, int sectors,
-			    int acknowledged)
-{
-	u64 *p;
-	int lo, hi;
-	int rv = 1;
-	unsigned long flags;
-
-	if (bb->shift < 0)
-		/* badblocks are disabled */
-		return 0;
-
-	if (bb->shift) {
-		/* round the start down, and the end up */
-		sector_t next = s + sectors;
-		s >>= bb->shift;
-		next += (1<<bb->shift) - 1;
-		next >>= bb->shift;
-		sectors = next - s;
-	}
-
-	write_seqlock_irqsave(&bb->lock, flags);
-
-	p = bb->page;
-	lo = 0;
-	hi = bb->count;
-	/* Find the last range that starts at-or-before 's' */
-	while (hi - lo > 1) {
-		int mid = (lo + hi) / 2;
-		sector_t a = BB_OFFSET(p[mid]);
-		if (a <= s)
-			lo = mid;
-		else
-			hi = mid;
-	}
-	if (hi > lo && BB_OFFSET(p[lo]) > s)
-		hi = lo;
-
-	if (hi > lo) {
-		/* we found a range that might merge with the start
-		 * of our new range
-		 */
-		sector_t a = BB_OFFSET(p[lo]);
-		sector_t e = a + BB_LEN(p[lo]);
-		int ack = BB_ACK(p[lo]);
-		if (e >= s) {
-			/* Yes, we can merge with a previous range */
-			if (s == a && s + sectors >= e)
-				/* new range covers old */
-				ack = acknowledged;
-			else
-				ack = ack && acknowledged;
-
-			if (e < s + sectors)
-				e = s + sectors;
-			if (e - a <= BB_MAX_LEN) {
-				p[lo] = BB_MAKE(a, e-a, ack);
-				s = e;
-			} else {
-				/* does not all fit in one range,
-				 * make p[lo] maximal
-				 */
-				if (BB_LEN(p[lo]) != BB_MAX_LEN)
-					p[lo] = BB_MAKE(a, BB_MAX_LEN, ack);
-				s = a + BB_MAX_LEN;
-			}
-			sectors = e - s;
-		}
-	}
-	if (sectors && hi < bb->count) {
-		/* 'hi' points to the first range that starts after 's'.
-		 * Maybe we can merge with the start of that range */
-		sector_t a = BB_OFFSET(p[hi]);
-		sector_t e = a + BB_LEN(p[hi]);
-		int ack = BB_ACK(p[hi]);
-		if (a <= s + sectors) {
-			/* merging is possible */
-			if (e <= s + sectors) {
-				/* full overlap */
-				e = s + sectors;
-				ack = acknowledged;
-			} else
-				ack = ack && acknowledged;
-
-			a = s;
-			if (e - a <= BB_MAX_LEN) {
-				p[hi] = BB_MAKE(a, e-a, ack);
-				s = e;
-			} else {
-				p[hi] = BB_MAKE(a, BB_MAX_LEN, ack);
-				s = a + BB_MAX_LEN;
-			}
-			sectors = e - s;
-			lo = hi;
-			hi++;
-		}
-	}
-	if (sectors == 0 && hi < bb->count) {
-		/* we might be able to combine lo and hi */
-		/* Note: 's' is at the end of 'lo' */
-		sector_t a = BB_OFFSET(p[hi]);
-		int lolen = BB_LEN(p[lo]);
-		int hilen = BB_LEN(p[hi]);
-		int newlen = lolen + hilen - (s - a);
-		if (s >= a && newlen < BB_MAX_LEN) {
-			/* yes, we can combine them */
-			int ack = BB_ACK(p[lo]) && BB_ACK(p[hi]);
-			p[lo] = BB_MAKE(BB_OFFSET(p[lo]), newlen, ack);
-			memmove(p + hi, p + hi + 1,
-				(bb->count - hi - 1) * 8);
-			bb->count--;
-		}
-	}
-	while (sectors) {
-		/* didn't merge (it all).
-		 * Need to add a range just before 'hi' */
-		if (bb->count >= MD_MAX_BADBLOCKS) {
-			/* No room for more */
-			rv = 0;
-			break;
-		} else {
-			int this_sectors = sectors;
-			memmove(p + hi + 1, p + hi,
-				(bb->count - hi) * 8);
-			bb->count++;
-
-			if (this_sectors > BB_MAX_LEN)
-				this_sectors = BB_MAX_LEN;
-			p[hi] = BB_MAKE(s, this_sectors, acknowledged);
-			sectors -= this_sectors;
-			s += this_sectors;
-		}
-	}
-
-	bb->changed = 1;
-	if (!acknowledged)
-		bb->unacked_exist = 1;
-	write_sequnlock_irqrestore(&bb->lock, flags);
-
-	return rv;
-}
+/* Bad block management */
 
 int rdev_set_badblocks(struct md_rdev *rdev, sector_t s, int sectors,
 		       int is_new)
@@ -8604,8 +8363,7 @@ int rdev_set_badblocks(struct md_rdev *rdev, sector_t s, int sectors,
 		s += rdev->new_data_offset;
 	else
 		s += rdev->data_offset;
-	rv = md_set_badblocks(&rdev->badblocks,
-			      s, sectors, 0);
+	rv = badblocks_set(&rdev->badblocks, s, sectors, 0);
 	if (rv) {
 		/* Make sure they get written out promptly */
 		sysfs_notify_dirent_safe(rdev->sysfs_state);
@@ -8617,101 +8375,6 @@ int rdev_set_badblocks(struct md_rdev *rdev, sector_t s, int sectors,
 }
 EXPORT_SYMBOL_GPL(rdev_set_badblocks);
 
-/*
- * Remove a range of bad blocks from the table.
- * This may involve extending the table if we spilt a region,
- * but it must not fail.  So if the table becomes full, we just
- * drop the remove request.
- */
-static int md_clear_badblocks(struct badblocks *bb, sector_t s, int sectors)
-{
-	u64 *p;
-	int lo, hi;
-	sector_t target = s + sectors;
-	int rv = 0;
-
-	if (bb->shift > 0) {
-		/* When clearing we round the start up and the end down.
-		 * This should not matter as the shift should align with
-		 * the block size and no rounding should ever be needed.
-		 * However it is better the think a block is bad when it
-		 * isn't than to think a block is not bad when it is.
-		 */
-		s += (1<<bb->shift) - 1;
-		s >>= bb->shift;
-		target >>= bb->shift;
-		sectors = target - s;
-	}
-
-	write_seqlock_irq(&bb->lock);
-
-	p = bb->page;
-	lo = 0;
-	hi = bb->count;
-	/* Find the last range that starts before 'target' */
-	while (hi - lo > 1) {
-		int mid = (lo + hi) / 2;
-		sector_t a = BB_OFFSET(p[mid]);
-		if (a < target)
-			lo = mid;
-		else
-			hi = mid;
-	}
-	if (hi > lo) {
-		/* p[lo] is the last range that could overlap the
-		 * current range.  Earlier ranges could also overlap,
-		 * but only this one can overlap the end of the range.
-		 */
-		if (BB_OFFSET(p[lo]) + BB_LEN(p[lo]) > target) {
-			/* Partial overlap, leave the tail of this range */
-			int ack = BB_ACK(p[lo]);
-			sector_t a = BB_OFFSET(p[lo]);
-			sector_t end = a + BB_LEN(p[lo]);
-
-			if (a < s) {
-				/* we need to split this range */
-				if (bb->count >= MD_MAX_BADBLOCKS) {
-					rv = -ENOSPC;
-					goto out;
-				}
-				memmove(p+lo+1, p+lo, (bb->count - lo) * 8);
-				bb->count++;
-				p[lo] = BB_MAKE(a, s-a, ack);
-				lo++;
-			}
-			p[lo] = BB_MAKE(target, end - target, ack);
-			/* there is no longer an overlap */
-			hi = lo;
-			lo--;
-		}
-		while (lo >= 0 &&
-		       BB_OFFSET(p[lo]) + BB_LEN(p[lo]) > s) {
-			/* This range does overlap */
-			if (BB_OFFSET(p[lo]) < s) {
-				/* Keep the early parts of this range. */
-				int ack = BB_ACK(p[lo]);
-				sector_t start = BB_OFFSET(p[lo]);
-				p[lo] = BB_MAKE(start, s - start, ack);
-				/* now low doesn't overlap, so.. */
-				break;
-			}
-			lo--;
-		}
-		/* 'lo' is strictly before, 'hi' is strictly after,
-		 * anything between needs to be discarded
-		 */
-		if (hi - lo > 1) {
-			memmove(p+lo+1, p+hi, (bb->count - hi) * 8);
-			bb->count -= (hi - lo - 1);
-		}
-	}
-
-	bb->changed = 1;
-out:
-	write_sequnlock_irq(&bb->lock);
-	return rv;
-}
-
 int rdev_clear_badblocks(struct md_rdev *rdev, sector_t s, int sectors,
 			 int is_new)
 {
@@ -8719,133 +8382,11 @@ int rdev_clear_badblocks(struct md_rdev *rdev, sector_t s, int sectors,
 		s += rdev->new_data_offset;
 	else
 		s += rdev->data_offset;
-	return md_clear_badblocks(&rdev->badblocks,
+	return badblocks_clear(&rdev->badblocks,
 				  s, sectors);
 }
 EXPORT_SYMBOL_GPL(rdev_clear_badblocks);
 
-/*
- * Acknowledge all bad blocks in a list.
- * This only succeeds if ->changed is clear.  It is used by
- * in-kernel metadata updates
- */
-void md_ack_all_badblocks(struct badblocks *bb)
-{
-	if (bb->page == NULL || bb->changed)
-		/* no point even trying */
-		return;
-	write_seqlock_irq(&bb->lock);
-
-	if (bb->changed == 0 && bb->unacked_exist) {
-		u64 *p = bb->page;
-		int i;
-		for (i = 0; i < bb->count ; i++) {
-			if (!BB_ACK(p[i])) {
-				sector_t start = BB_OFFSET(p[i]);
-				int len = BB_LEN(p[i]);
-				p[i] = BB_MAKE(start, len, 1);
-			}
-		}
-		bb->unacked_exist = 0;
-	}
-	write_sequnlock_irq(&bb->lock);
-}
-EXPORT_SYMBOL_GPL(md_ack_all_badblocks);
-
-/* sysfs access to bad-blocks list.
- * We present two files.
- * 'bad-blocks' lists sector numbers and lengths of ranges that
- *    are recorded as bad.  The list is truncated to fit within
- *    the one-page limit of sysfs.
- *    Writing "sector length" to this file adds an acknowledged
- *    bad block list.
- * 'unacknowledged-bad-blocks' lists bad blocks that have not yet
- *    been acknowledged.  Writing to this file adds bad blocks
- *    without acknowledging them.  This is largely for testing.
- */
-
-static ssize_t
-badblocks_show(struct badblocks *bb, char *page, int unack)
-{
-	size_t len;
-	int i;
-	u64 *p = bb->page;
-	unsigned seq;
-
-	if (bb->shift < 0)
-		return 0;
-
-retry:
-	seq = read_seqbegin(&bb->lock);
-
-	len = 0;
-	i = 0;
-
-	while (len < PAGE_SIZE && i < bb->count) {
-		sector_t s = BB_OFFSET(p[i]);
-		unsigned int length = BB_LEN(p[i]);
-		int ack = BB_ACK(p[i]);
-		i++;
-
-		if (unack && ack)
-			continue;
-
-		len += snprintf(page+len, PAGE_SIZE-len, "%llu %u\n",
-				(unsigned long long)s << bb->shift,
-				length << bb->shift);
-	}
-	if (unack && len == 0)
-		bb->unacked_exist = 0;
-
-	if (read_seqretry(&bb->lock, seq))
-		goto retry;
-
-	return len;
-}
-
-#define DO_DEBUG 1
-
-static ssize_t
-badblocks_store(struct badblocks *bb, const char *page, size_t len, int unack)
-{
-	unsigned long long sector;
-	int length;
-	char newline;
-#ifdef DO_DEBUG
-	/* Allow clearing via sysfs *only* for testing/debugging.
-	 * Normally only a successful write may clear a badblock
-	 */
-	int clear = 0;
-	if (page[0] == '-') {
-		clear = 1;
-		page++;
-	}
-#endif /* DO_DEBUG */
-
-	switch (sscanf(page, "%llu %d%c", &sector, &length, &newline)) {
-	case 3:
-		if (newline != '\n')
-			return -EINVAL;
-	case 2:
-		if (length <= 0)
-			return -EINVAL;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-#ifdef DO_DEBUG
-	if (clear) {
-		md_clear_badblocks(bb, sector, length);
-		return len;
-	}
-#endif /* DO_DEBUG */
-	if (md_set_badblocks(bb, sector, length, !unack))
-		return len;
-	else
-		return -ENOSPC;
-}
-
 static int md_notify_reboot(struct notifier_block *this,
 			    unsigned long code, void *x)
 {
diff --git a/drivers/md/md.h b/drivers/md/md.h
index ab33957..dd9fab8 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -17,6 +17,7 @@
 
 #include <linux/blkdev.h>
 #include <linux/backing-dev.h>
+#include <linux/badblocks.h>
 #include <linux/kobject.h>
 #include <linux/list.h>
 #include <linux/mm.h>
@@ -28,13 +29,6 @@
 
 #define MaxSector (~(sector_t)0)
 
-/* Bad block numbers are stored sorted in a single page.
- * 64bits is used for each block or extent.
- * 54 bits are sector number, 9 bits are extent size,
- * 1 bit is an 'acknowledged' flag.
- */
-#define MD_MAX_BADBLOCKS	(PAGE_SIZE/8)
-
 /*
  * MD's 'extended' device
  */
@@ -111,22 +105,7 @@ struct md_rdev {
 	struct kernfs_node *sysfs_state; /* handle for 'state'
 					   * sysfs entry */
 
-	struct badblocks {
-		int	count;		/* count of bad blocks */
-		int	unacked_exist;	/* there probably are unacknowledged
-					 * bad blocks.  This is only cleared
-					 * when a read discovers none
-					 */
-		int	shift;		/* shift from sectors to block size
-					 * a -ve shift means badblocks are
-					 * disabled.*/
-		u64	*page;		/* badblock list */
-		int	changed;
-		seqlock_t lock;
-
-		sector_t sector;
-		sector_t size;		/* in sectors */
-	} badblocks;
+	struct badblocks badblocks;
 };
 enum flag_bits {
 	Faulty,			/* device is known to have a fault */
@@ -183,13 +162,11 @@ enum flag_bits {
 #define BB_ACK(x)	(!!((x) & BB_ACK_MASK))
 #define BB_MAKE(a, l, ack) (((a)<<9) | ((l)-1) | ((u64)(!!(ack)) << 63))
 
-extern int md_is_badblock(struct badblocks *bb, sector_t s, int sectors,
-			  sector_t *first_bad, int *bad_sectors);
 static inline int is_badblock(struct md_rdev *rdev, sector_t s, int sectors,
 			      sector_t *first_bad, int *bad_sectors)
 {
 	if (unlikely(rdev->badblocks.count)) {
-		int rv = md_is_badblock(&rdev->badblocks, rdev->data_offset + s,
+		int rv = badblocks_check(&rdev->badblocks, rdev->data_offset + s,
 					sectors,
 					first_bad, bad_sectors);
 		if (rv)
@@ -202,8 +179,6 @@ extern int rdev_set_badblocks(struct md_rdev *rdev, sector_t s, int sectors,
 			      int is_new);
 extern int rdev_clear_badblocks(struct md_rdev *rdev, sector_t s, int sectors,
 				int is_new);
-extern void md_ack_all_badblocks(struct badblocks *bb);
-
 struct md_cluster_info;
 
 struct mddev {
-- 
2.5.0


      parent reply	other threads:[~2015-11-21  0:49 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-21  0:49 [PATCH 0/3] Badblock tracking for gendisks Vishal Verma
2015-11-21  0:49 ` [PATCH 1/3] badblocks: Add core badblock management code Vishal Verma
2015-11-24 19:19   ` Jens Axboe
2015-11-21  0:49 ` [PATCH 2/3] block: Add badblock management for gendisks Vishal Verma
2015-11-24 15:34   ` Jeff Moyer
2015-11-24 19:03     ` Verma, Vishal L
2015-11-24 19:14       ` Jeff Moyer
2015-11-24 20:10         ` Verma, Vishal L
2015-11-24 21:31           ` Dan Williams
2015-11-25 15:37           ` Jeff Moyer
2015-11-25 17:55             ` Verma, Vishal L
2015-11-25 18:07               ` Jeff Moyer
2015-11-21  0:49 ` Vishal Verma [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1448066960-20119-4-git-send-email-vishal.l.verma@intel.com \
    --to=vishal.l.verma@intel.com \
    --cc=axboe@fb.com \
    --cc=jmoyer@redhat.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-nvdimm@lists.01.org \
    --cc=linux-raid@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=neilb@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.