From: Nikita Kiryanov <nikita@compulab.co.il>
To: broonie@kernel.org, lgirdwood@gmail.com,
linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Nikita Kiryanov <nikita@compulab.co.il>,
Tony Lindgren <tony@atomide.com>,
Samuel Ortiz <sameo@linux.intel.com>,
Lee Jones <lee.jones@linaro.org>
Subject: [PATCH] regulator: tps65218: add support for LS3 current regulator
Date: Wed, 25 Nov 2015 13:59:04 +0200 [thread overview]
Message-ID: <1448452744-17126-1-git-send-email-nikita@compulab.co.il> (raw)
Add support for TPS65218 LS3 current regulator, which is capable of 4
current input limit modes: 100, 200, 500, and 1000 uA.
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Lee Jones <lee.jones@linaro.org>
---
drivers/regulator/tps65218-regulator.c | 137 +++++++++++++++++++++++++--------
include/linux/mfd/tps65218.h | 7 +-
include/linux/regulator/driver.h | 2 +
3 files changed, 115 insertions(+), 31 deletions(-)
diff --git a/drivers/regulator/tps65218-regulator.c b/drivers/regulator/tps65218-regulator.c
index 7f97223..d88eb57 100644
--- a/drivers/regulator/tps65218-regulator.c
+++ b/drivers/regulator/tps65218-regulator.c
@@ -27,19 +27,22 @@
#include <linux/regulator/machine.h>
#include <linux/mfd/tps65218.h>
-enum tps65218_regulators { DCDC1, DCDC2, DCDC3, DCDC4, DCDC5, DCDC6, LDO1 };
+enum tps65218_regulators { DCDC1, DCDC2, DCDC3, DCDC4,
+ DCDC5, DCDC6, LDO1, LS3 };
-#define TPS65218_REGULATOR(_name, _id, _ops, _n, _vr, _vm, _er, _em, \
- _lr, _nlr, _delay, _fuv) \
+#define TPS65218_REGULATOR(_name, _id, _type, _ops, _n, _vr, _vm, _er, _em, \
+ _cr, _cm, _lr, _nlr, _delay, _fuv) \
{ \
.name = _name, \
.id = _id, \
.ops = &_ops, \
.n_voltages = _n, \
- .type = REGULATOR_VOLTAGE, \
+ .type = _type, \
.owner = THIS_MODULE, \
.vsel_reg = _vr, \
.vsel_mask = _vm, \
+ .csel_reg = _cr, \
+ .csel_mask = _cm, \
.enable_reg = _er, \
.enable_mask = _em, \
.volt_table = NULL, \
@@ -80,6 +83,7 @@ static struct tps_info tps65218_pmic_regs[] = {
TPS65218_INFO(DCDC5, "DCDC5", 1000000, 1000000),
TPS65218_INFO(DCDC6, "DCDC6", 1800000, 1800000),
TPS65218_INFO(LDO1, "LDO1", 900000, 3400000),
+ TPS65218_INFO(LS3, "LS3", -1, -1),
};
#define TPS65218_OF_MATCH(comp, label) \
@@ -96,6 +100,7 @@ static const struct of_device_id tps65218_of_match[] = {
TPS65218_OF_MATCH("ti,tps65218-dcdc5", tps65218_pmic_regs[DCDC5]),
TPS65218_OF_MATCH("ti,tps65218-dcdc6", tps65218_pmic_regs[DCDC6]),
TPS65218_OF_MATCH("ti,tps65218-ldo1", tps65218_pmic_regs[LDO1]),
+ TPS65218_OF_MATCH("ti,tps65218-ls3", tps65218_pmic_regs[LS3]),
{ }
};
MODULE_DEVICE_TABLE(of, tps65218_of_match);
@@ -175,6 +180,68 @@ static struct regulator_ops tps65218_ldo1_dcdc34_ops = {
.map_voltage = regulator_map_voltage_linear_range,
};
+static const int ls3_currents[] = { 100, 200, 500, 1000 };
+
+static int tps65218_pmic_set_input_current_lim(struct regulator_dev *dev,
+ int lim_uA)
+{
+ unsigned int index = 0;
+ unsigned int num_currents = ARRAY_SIZE(ls3_currents);
+ struct tps65218 *tps = rdev_get_drvdata(dev);
+
+ while (index < num_currents && ls3_currents[index] != lim_uA)
+ index++;
+
+ if (index == num_currents)
+ return -EINVAL;
+
+ return tps65218_set_bits(tps, dev->desc->csel_reg, dev->desc->csel_mask,
+ index << 2, TPS65218_PROTECT_L1);
+}
+
+static int tps65218_pmic_set_current_limit(struct regulator_dev *dev,
+ int min_uA, int max_uA)
+{
+ int index = 0;
+ unsigned int num_currents = ARRAY_SIZE(ls3_currents);
+ struct tps65218 *tps = rdev_get_drvdata(dev);
+
+ while (index < num_currents && ls3_currents[index] < max_uA)
+ index++;
+
+ index--;
+
+ if (index < 0 || ls3_currents[index] < min_uA)
+ return -EINVAL;
+
+ return tps65218_set_bits(tps, dev->desc->csel_reg, dev->desc->csel_mask,
+ index << 2, TPS65218_PROTECT_L1);
+}
+
+static int tps65218_pmic_get_current_limit(struct regulator_dev *dev)
+{
+ int retval;
+ unsigned int index;
+ struct tps65218 *tps = rdev_get_drvdata(dev);
+
+ retval = tps65218_reg_read(tps, dev->desc->csel_reg, &index);
+ if (retval < 0)
+ return retval;
+
+ index = (index & dev->desc->csel_mask) >> 2;
+
+ return ls3_currents[index];
+}
+
+static struct regulator_ops tps65218_ls3_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = tps65218_pmic_enable,
+ .disable = tps65218_pmic_disable,
+ .set_input_current_limit = tps65218_pmic_set_input_current_lim,
+ .set_current_limit = tps65218_pmic_set_current_limit,
+ .get_current_limit = tps65218_pmic_get_current_limit,
+};
+
/* Operations permitted on DCDC5, DCDC6 */
static struct regulator_ops tps65218_dcdc56_pmic_ops = {
.is_enabled = regulator_is_enabled_regmap,
@@ -183,36 +250,46 @@ static struct regulator_ops tps65218_dcdc56_pmic_ops = {
};
static const struct regulator_desc regulators[] = {
- TPS65218_REGULATOR("DCDC1", TPS65218_DCDC_1, tps65218_dcdc12_ops, 64,
- TPS65218_REG_CONTROL_DCDC1,
- TPS65218_CONTROL_DCDC1_MASK,
- TPS65218_REG_ENABLE1, TPS65218_ENABLE1_DC1_EN,
- dcdc1_dcdc2_ranges, 2, 4000, 0),
- TPS65218_REGULATOR("DCDC2", TPS65218_DCDC_2, tps65218_dcdc12_ops, 64,
- TPS65218_REG_CONTROL_DCDC2,
- TPS65218_CONTROL_DCDC2_MASK,
- TPS65218_REG_ENABLE1, TPS65218_ENABLE1_DC2_EN,
- dcdc1_dcdc2_ranges, 2, 4000, 0),
- TPS65218_REGULATOR("DCDC3", TPS65218_DCDC_3, tps65218_ldo1_dcdc34_ops,
- 64, TPS65218_REG_CONTROL_DCDC3,
+ TPS65218_REGULATOR("DCDC1", TPS65218_DCDC_1, REGULATOR_VOLTAGE,
+ tps65218_dcdc12_ops, 64, TPS65218_REG_CONTROL_DCDC1,
+ TPS65218_CONTROL_DCDC1_MASK, TPS65218_REG_ENABLE1,
+ TPS65218_ENABLE1_DC1_EN, 0, 0, dcdc1_dcdc2_ranges,
+ 2, 4000, 0),
+ TPS65218_REGULATOR("DCDC2", TPS65218_DCDC_2, REGULATOR_VOLTAGE,
+ tps65218_dcdc12_ops, 64, TPS65218_REG_CONTROL_DCDC2,
+ TPS65218_CONTROL_DCDC2_MASK, TPS65218_REG_ENABLE1,
+ TPS65218_ENABLE1_DC2_EN, 0, 0, dcdc1_dcdc2_ranges,
+ 2, 4000, 0),
+ TPS65218_REGULATOR("DCDC3", TPS65218_DCDC_3, REGULATOR_VOLTAGE,
+ tps65218_ldo1_dcdc34_ops, 64,
+ TPS65218_REG_CONTROL_DCDC3,
TPS65218_CONTROL_DCDC3_MASK, TPS65218_REG_ENABLE1,
- TPS65218_ENABLE1_DC3_EN, ldo1_dcdc3_ranges, 2, 0, 0),
- TPS65218_REGULATOR("DCDC4", TPS65218_DCDC_4, tps65218_ldo1_dcdc34_ops,
- 53, TPS65218_REG_CONTROL_DCDC4,
- TPS65218_CONTROL_DCDC4_MASK,
- TPS65218_REG_ENABLE1, TPS65218_ENABLE1_DC4_EN,
- dcdc4_ranges, 2, 0, 0),
- TPS65218_REGULATOR("DCDC5", TPS65218_DCDC_5, tps65218_dcdc56_pmic_ops,
- 1, -1, -1, TPS65218_REG_ENABLE1,
- TPS65218_ENABLE1_DC5_EN, NULL, 0, 0, 1000000),
- TPS65218_REGULATOR("DCDC6", TPS65218_DCDC_6, tps65218_dcdc56_pmic_ops,
- 1, -1, -1, TPS65218_REG_ENABLE1,
- TPS65218_ENABLE1_DC6_EN, NULL, 0, 0, 1800000),
- TPS65218_REGULATOR("LDO1", TPS65218_LDO_1, tps65218_ldo1_dcdc34_ops, 64,
+ TPS65218_ENABLE1_DC3_EN, 0, 0, ldo1_dcdc3_ranges, 2,
+ 0, 0),
+ TPS65218_REGULATOR("DCDC4", TPS65218_DCDC_4, REGULATOR_VOLTAGE,
+ tps65218_ldo1_dcdc34_ops, 53,
+ TPS65218_REG_CONTROL_DCDC4,
+ TPS65218_CONTROL_DCDC4_MASK, TPS65218_REG_ENABLE1,
+ TPS65218_ENABLE1_DC4_EN, 0, 0, dcdc4_ranges, 2,
+ 0, 0),
+ TPS65218_REGULATOR("DCDC5", TPS65218_DCDC_5, REGULATOR_VOLTAGE,
+ tps65218_dcdc56_pmic_ops, 1, -1, -1,
+ TPS65218_REG_ENABLE1, TPS65218_ENABLE1_DC5_EN, 0, 0,
+ NULL, 0, 0, 1000000),
+ TPS65218_REGULATOR("DCDC6", TPS65218_DCDC_6, REGULATOR_VOLTAGE,
+ tps65218_dcdc56_pmic_ops, 1, -1, -1,
+ TPS65218_REG_ENABLE1, TPS65218_ENABLE1_DC6_EN, 0, 0,
+ NULL, 0, 0, 1800000),
+ TPS65218_REGULATOR("LDO1", TPS65218_LDO_1, REGULATOR_VOLTAGE,
+ tps65218_ldo1_dcdc34_ops, 64,
TPS65218_REG_CONTROL_LDO1,
TPS65218_CONTROL_LDO1_MASK, TPS65218_REG_ENABLE2,
- TPS65218_ENABLE2_LDO1_EN, ldo1_dcdc3_ranges,
+ TPS65218_ENABLE2_LDO1_EN, 0, 0, ldo1_dcdc3_ranges,
2, 0, 0),
+ TPS65218_REGULATOR("LS3", TPS65218_LS_3, REGULATOR_CURRENT,
+ tps65218_ls3_ops, 0, 0, 0, TPS65218_REG_ENABLE2,
+ TPS65218_ENABLE2_LS3_EN, TPS65218_REG_CONFIG2,
+ TPS65218_CONFIG2_LS3ILIM_MASK, NULL, 0, 0, 0),
};
static int tps65218_regulator_probe(struct platform_device *pdev)
diff --git a/include/linux/mfd/tps65218.h b/include/linux/mfd/tps65218.h
index 2f9b593..d58f3b5 100644
--- a/include/linux/mfd/tps65218.h
+++ b/include/linux/mfd/tps65218.h
@@ -200,6 +200,8 @@ enum tps65218_regulator_id {
TPS65218_DCDC_4,
TPS65218_DCDC_5,
TPS65218_DCDC_6,
+ /* LS's */
+ TPS65218_LS_3,
/* LDOs */
TPS65218_LDO_1,
};
@@ -210,8 +212,11 @@ enum tps65218_regulator_id {
#define TPS65218_NUM_DCDC 6
/* Number of LDO voltage regulators available */
#define TPS65218_NUM_LDO 1
+/* Number of total LS current regulators available */
+#define TPS65218_NUM_LS 1
/* Number of total regulators available */
-#define TPS65218_NUM_REGULATOR (TPS65218_NUM_DCDC + TPS65218_NUM_LDO)
+#define TPS65218_NUM_REGULATOR (TPS65218_NUM_DCDC + TPS65218_NUM_LDO \
+ + TPS65218_NUM_LS)
/* Define the TPS65218 IRQ numbers */
enum tps65218_irqs {
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 4db9fbe..fe77709 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -299,6 +299,8 @@ struct regulator_desc {
unsigned int vsel_reg;
unsigned int vsel_mask;
+ unsigned int csel_reg;
+ unsigned int csel_mask;
unsigned int apply_reg;
unsigned int apply_bit;
unsigned int enable_reg;
--
1.9.1
next reply other threads:[~2015-11-25 11:59 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-25 11:59 Nikita Kiryanov [this message]
2015-11-25 13:00 ` Applied "regulator: tps65218: add support for LS3 current regulator" to the regulator tree Mark Brown
2015-11-26 10:10 ` [PATCH] regulator: tps65218: add support for LS3 current regulator Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1448452744-17126-1-git-send-email-nikita@compulab.co.il \
--to=nikita@compulab.co.il \
--cc=broonie@kernel.org \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=sameo@linux.intel.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.