All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Hutterer <peter.hutterer@who-t.net>
To: linux-input@vger.kernel.org
Cc: Peter Hutterer <peter.hutterer@who-t.net>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Benjamin Tissoires <benjamin.tissoires@gmail.com>,
	Ping Cheng <pinglinux@gmail.com>,
	Jason Gerecke <killertofu@gmail.com>
Subject: [PATCH 4/5] Input: wacom_w8001 - split pen and touch initialization up
Date: Mon, 30 Nov 2015 13:38:15 +1000	[thread overview]
Message-ID: <1448854696-32625-4-git-send-email-peter.hutterer@who-t.net> (raw)
In-Reply-To: <1448854696-32625-1-git-send-email-peter.hutterer@who-t.net>

This is preparation work for splitting it up for two event nodes.

The error handling for the touch init failure must be special-cased, a
device may respond to a touch query with a zero reply. In this case we
don't have a touch device, but we don't have a true failure either.
Returning 1 as special value here so we can then restore the true error
code on failure.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
---
 drivers/input/touchscreen/wacom_w8001.c | 198 ++++++++++++++++++--------------
 1 file changed, 112 insertions(+), 86 deletions(-)

diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c
index cdebf8e..363e510 100644
--- a/drivers/input/touchscreen/wacom_w8001.c
+++ b/drivers/input/touchscreen/wacom_w8001.c
@@ -380,12 +380,10 @@ static void w8001_close(struct input_dev *dev)
 	w8001_command(w8001, W8001_CMD_STOP, false);
 }
 
-static int w8001_setup(struct w8001 *w8001)
+static int w8001_detect(struct w8001 *w8001)
 {
 	struct input_dev *dev = w8001->dev;
-	struct w8001_coord coord;
-	struct w8001_touch_query touch;
-	int error, err_pen, err_touch;
+	int error;
 
 	error = w8001_command(w8001, W8001_CMD_STOP, false);
 	if (error)
@@ -399,101 +397,122 @@ static int w8001_setup(struct w8001 *w8001)
 
 	__set_bit(INPUT_PROP_DIRECT, dev->propbit);
 
+	return 0;
+}
+
+static int w8001_setup_pen(struct w8001 *w8001)
+{
+	struct input_dev *dev = w8001->dev;
+	struct w8001_coord coord;
+	int error;
+
 	/* penabled? */
-	err_pen = w8001_command(w8001, W8001_CMD_QUERY, true);
-	if (!err_pen) {
-		__set_bit(BTN_TOUCH, dev->keybit);
-		__set_bit(BTN_TOOL_PEN, dev->keybit);
-		__set_bit(BTN_TOOL_RUBBER, dev->keybit);
-		__set_bit(BTN_STYLUS, dev->keybit);
-		__set_bit(BTN_STYLUS2, dev->keybit);
+	error = w8001_command(w8001, W8001_CMD_QUERY, true);
+	if (error)
+		return error;
 
-		parse_pen_data(w8001->response, &coord);
-		w8001->max_pen_x = coord.x;
-		w8001->max_pen_y = coord.y;
+	__set_bit(BTN_TOUCH, dev->keybit);
+	__set_bit(BTN_TOOL_PEN, dev->keybit);
+	__set_bit(BTN_TOOL_RUBBER, dev->keybit);
+	__set_bit(BTN_STYLUS, dev->keybit);
+	__set_bit(BTN_STYLUS2, dev->keybit);
 
-		input_set_abs_params(dev, ABS_X, 0, coord.x, 0, 0);
-		input_set_abs_params(dev, ABS_Y, 0, coord.y, 0, 0);
-		input_abs_set_res(dev, ABS_X, W8001_PEN_RESOLUTION);
-		input_abs_set_res(dev, ABS_Y, W8001_PEN_RESOLUTION);
-		input_set_abs_params(dev, ABS_PRESSURE, 0, coord.pen_pressure, 0, 0);
-		if (coord.tilt_x && coord.tilt_y) {
-			input_set_abs_params(dev, ABS_TILT_X, 0, coord.tilt_x, 0, 0);
-			input_set_abs_params(dev, ABS_TILT_Y, 0, coord.tilt_y, 0, 0);
-		}
-		w8001->id = 0x90;
-		strlcat(w8001->name, " Penabled", sizeof(w8001->name));
+	parse_pen_data(w8001->response, &coord);
+	w8001->max_pen_x = coord.x;
+	w8001->max_pen_y = coord.y;
+
+	input_set_abs_params(dev, ABS_X, 0, coord.x, 0, 0);
+	input_set_abs_params(dev, ABS_Y, 0, coord.y, 0, 0);
+	input_abs_set_res(dev, ABS_X, W8001_PEN_RESOLUTION);
+	input_abs_set_res(dev, ABS_Y, W8001_PEN_RESOLUTION);
+	input_set_abs_params(dev, ABS_PRESSURE, 0, coord.pen_pressure, 0, 0);
+	if (coord.tilt_x && coord.tilt_y) {
+		input_set_abs_params(dev, ABS_TILT_X, 0, coord.tilt_x, 0, 0);
+		input_set_abs_params(dev, ABS_TILT_Y, 0, coord.tilt_y, 0, 0);
 	}
 
+	w8001->id = 0x90;
+	strlcat(w8001->name, " Penabled", sizeof(w8001->name));
+
+	return 0;
+}
+
+static int w8001_setup_touch(struct w8001 *w8001)
+{
+	struct input_dev *dev = w8001->dev;
+	struct w8001_touch_query touch;
+	int error;
+
 	/* Touch enabled? */
-	err_touch = w8001_command(w8001, W8001_CMD_TOUCHQUERY, true);
+	error = w8001_command(w8001, W8001_CMD_TOUCHQUERY, true);
+	if (error)
+		return error;
 
 	/*
 	 * Some non-touch devices may reply to the touch query. But their
 	 * second byte is empty, which indicates touch is not supported.
 	 */
-	if (!err_touch && w8001->response[1]) {
-		err_touch = 1;
-
-		__set_bit(BTN_TOUCH, dev->keybit);
-		__set_bit(BTN_TOOL_FINGER, dev->keybit);
-
-		parse_touchquery(w8001->response, &touch);
-		w8001->max_touch_x = touch.x;
-		w8001->max_touch_y = touch.y;
-
-		if (w8001->max_pen_x && w8001->max_pen_y) {
-			/* if pen is supported scale to pen maximum */
-			touch.x = w8001->max_pen_x;
-			touch.y = w8001->max_pen_y;
-			touch.panel_res = W8001_PEN_RESOLUTION;
-		}
-
-		input_set_abs_params(dev, ABS_X, 0, touch.x, 0, 0);
-		input_set_abs_params(dev, ABS_Y, 0, touch.y, 0, 0);
-		input_abs_set_res(dev, ABS_X, touch.panel_res);
-		input_abs_set_res(dev, ABS_Y, touch.panel_res);
-
-		switch (touch.sensor_id) {
-		case 0:
-		case 2:
-			w8001->pktlen = W8001_PKTLEN_TOUCH93;
-			w8001->id = 0x93;
-			strlcat(w8001->name, " 1FG", sizeof(w8001->name));
-			break;
-
-		case 1:
-		case 3:
-		case 4:
-			w8001->pktlen = W8001_PKTLEN_TOUCH9A;
-			strlcat(w8001->name, " 1FG", sizeof(w8001->name));
-			w8001->id = 0x9a;
-			break;
-
-		case 5:
-			w8001->pktlen = W8001_PKTLEN_TOUCH2FG;
-
-			__set_bit(BTN_TOOL_DOUBLETAP, dev->keybit);
-			input_mt_init_slots(dev, 2, 0);
-			input_set_abs_params(dev, ABS_MT_POSITION_X,
-						0, touch.x, 0, 0);
-			input_set_abs_params(dev, ABS_MT_POSITION_Y,
-						0, touch.y, 0, 0);
-			input_set_abs_params(dev, ABS_MT_TOOL_TYPE,
-						0, MT_TOOL_MAX, 0, 0);
-
-			strlcat(w8001->name, " 2FG", sizeof(w8001->name));
-			if (w8001->max_pen_x && w8001->max_pen_y)
-				w8001->id = 0xE3;
-			else
-				w8001->id = 0xE2;
-			break;
-		}
+	if (!w8001->response[1])
+		return 1;
+
+	__set_bit(BTN_TOUCH, dev->keybit);
+	__set_bit(BTN_TOOL_FINGER, dev->keybit);
+
+	parse_touchquery(w8001->response, &touch);
+	w8001->max_touch_x = touch.x;
+	w8001->max_touch_y = touch.y;
+
+	if (w8001->max_pen_x && w8001->max_pen_y) {
+		/* if pen is supported scale to pen maximum */
+		touch.x = w8001->max_pen_x;
+		touch.y = w8001->max_pen_y;
+		touch.panel_res = W8001_PEN_RESOLUTION;
+	}
+
+	input_set_abs_params(dev, ABS_X, 0, touch.x, 0, 0);
+	input_set_abs_params(dev, ABS_Y, 0, touch.y, 0, 0);
+	input_abs_set_res(dev, ABS_X, touch.panel_res);
+	input_abs_set_res(dev, ABS_Y, touch.panel_res);
+
+	switch (touch.sensor_id) {
+	case 0:
+	case 2:
+		w8001->pktlen = W8001_PKTLEN_TOUCH93;
+		w8001->id = 0x93;
+		strlcat(w8001->name, " 1FG", sizeof(w8001->name));
+		break;
+
+	case 1:
+	case 3:
+	case 4:
+		w8001->pktlen = W8001_PKTLEN_TOUCH9A;
+		strlcat(w8001->name, " 1FG", sizeof(w8001->name));
+		w8001->id = 0x9a;
+		break;
+
+	case 5:
+		w8001->pktlen = W8001_PKTLEN_TOUCH2FG;
+
+		__set_bit(BTN_TOOL_DOUBLETAP, dev->keybit);
+		input_mt_init_slots(dev, 2, 0);
+		input_set_abs_params(dev, ABS_MT_POSITION_X,
+					0, touch.x, 0, 0);
+		input_set_abs_params(dev, ABS_MT_POSITION_Y,
+					0, touch.y, 0, 0);
+		input_set_abs_params(dev, ABS_MT_TOOL_TYPE,
+					0, MT_TOOL_MAX, 0, 0);
+
+		strlcat(w8001->name, " 2FG", sizeof(w8001->name));
+		if (w8001->max_pen_x && w8001->max_pen_y)
+			w8001->id = 0xE3;
+		else
+			w8001->id = 0xE2;
+		break;
 	}
 
 	strlcat(w8001->name, " Touchscreen", sizeof(w8001->name));
 
-	return !err_pen || !err_touch;
+	return 0;
 }
 
 /*
@@ -522,7 +541,7 @@ static int w8001_connect(struct serio *serio, struct serio_driver *drv)
 {
 	struct w8001 *w8001;
 	struct input_dev *input_dev;
-	int err;
+	int err, err_pen, err_touch;
 
 	w8001 = kzalloc(sizeof(struct w8001), GFP_KERNEL);
 	input_dev = input_allocate_device();
@@ -541,10 +560,17 @@ static int w8001_connect(struct serio *serio, struct serio_driver *drv)
 	if (err)
 		goto fail2;
 
-	err = w8001_setup(w8001);
+	err = w8001_detect(w8001);
 	if (err)
 		goto fail3;
 
+	err_pen = w8001_setup_pen(w8001);
+	err_touch = w8001_setup_touch(w8001);
+	if (err_pen && err_touch) {
+		err = (err_touch == 1) ? err_pen : err_touch;
+		goto fail3;
+	}
+
 	input_dev->name = w8001->name;
 	input_dev->phys = w8001->phys;
 	input_dev->id.product = w8001->id;
-- 
2.5.0


  parent reply	other threads:[~2015-11-30  3:50 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-30  3:38 [PATCH 1/5] Input: wacom_w8001 - use __set_bit for evbits Peter Hutterer
2015-11-30  3:38 ` [PATCH 2/5] Input: wacom_w8001 - set BTN_TOOL_DOUBLETAP if we have 2fg support Peter Hutterer
2015-11-30  3:38 ` [PATCH 3/5] Input: wacom_w8001 - handle touch error case correctly Peter Hutterer
2015-12-01 22:01   ` Dmitry Torokhov
2015-12-03  4:21     ` [PATCH v2 " Peter Hutterer
2015-12-03  4:22     ` [PATCH v2 4/5] Input: wacom_w8001 - split pen and touch initialization up Peter Hutterer
2015-11-30  3:38 ` Peter Hutterer [this message]
2015-12-01 22:04   ` [PATCH " Dmitry Torokhov
2015-11-30  3:38 ` [PATCH 5/5] Input: wacom_w8001 - split the touch and pen devices into two devices Peter Hutterer
2015-12-01 22:06   ` Dmitry Torokhov
2015-12-03  4:22     ` [PATCH v2 " Peter Hutterer
2015-12-03 23:59       ` Dmitry Torokhov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1448854696-32625-4-git-send-email-peter.hutterer@who-t.net \
    --to=peter.hutterer@who-t.net \
    --cc=benjamin.tissoires@gmail.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=killertofu@gmail.com \
    --cc=linux-input@vger.kernel.org \
    --cc=pinglinux@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.