All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
To: Maxime Ripard
	<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
	Linus Walleij
	<linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
	Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	Ian Campbell
	<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
	Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Cc: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
	linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Subject: [PATCH 6/7] ARM: dts: sun9i: Add Reduced Serial Bus controller device node to A80 dtsi
Date: Tue,  1 Dec 2015 13:47:24 +0800	[thread overview]
Message-ID: <1448948845-28347-7-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1448948845-28347-1-git-send-email-wens-jdAy2FN1RRM@public.gmane.org>

This patch adds a device node for the Reduced Serial Bus (RSB)
controller and the defacto pinmux setting to the A80 dtsi.

Since there is only one possible pinmux setting for RSB, just
set it in the dtsi.

Signed-off-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
---
 arch/arm/boot/dts/sun9i-a80.dtsi | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 80777a33ee78..dc666c69f6ab 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -900,6 +900,27 @@
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
+
+			r_rsb_pins: r_rsb {
+				allwinner,pins = "PN0", "PN1";
+				allwinner,function = "s_rsb";
+				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+		};
+
+		r_rsb: i2c@08003400 {
+			compatible = "allwinner,sun8i-a23-rsb";
+			reg = <0x08003400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apbs_gates 3>;
+			clock-frequency = <3000000>;
+			resets = <&apbs_rst 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_rsb_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 	};
 };
-- 
2.6.2

WARNING: multiple messages have this Message-ID (diff)
From: Chen-Yu Tsai <wens@csie.org>
To: Maxime Ripard <maxime.ripard@free-electrons.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>
Cc: Chen-Yu Tsai <wens@csie.org>,
	linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	linux-sunxi@googlegroups.com
Subject: [PATCH 6/7] ARM: dts: sun9i: Add Reduced Serial Bus controller device node to A80 dtsi
Date: Tue,  1 Dec 2015 13:47:24 +0800	[thread overview]
Message-ID: <1448948845-28347-7-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1448948845-28347-1-git-send-email-wens@csie.org>

This patch adds a device node for the Reduced Serial Bus (RSB)
controller and the defacto pinmux setting to the A80 dtsi.

Since there is only one possible pinmux setting for RSB, just
set it in the dtsi.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm/boot/dts/sun9i-a80.dtsi | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 80777a33ee78..dc666c69f6ab 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -900,6 +900,27 @@
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
+
+			r_rsb_pins: r_rsb {
+				allwinner,pins = "PN0", "PN1";
+				allwinner,function = "s_rsb";
+				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+		};
+
+		r_rsb: i2c@08003400 {
+			compatible = "allwinner,sun8i-a23-rsb";
+			reg = <0x08003400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apbs_gates 3>;
+			clock-frequency = <3000000>;
+			resets = <&apbs_rst 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_rsb_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 	};
 };
-- 
2.6.2


WARNING: multiple messages have this Message-ID (diff)
From: wens@csie.org (Chen-Yu Tsai)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/7] ARM: dts: sun9i: Add Reduced Serial Bus controller device node to A80 dtsi
Date: Tue,  1 Dec 2015 13:47:24 +0800	[thread overview]
Message-ID: <1448948845-28347-7-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1448948845-28347-1-git-send-email-wens@csie.org>

This patch adds a device node for the Reduced Serial Bus (RSB)
controller and the defacto pinmux setting to the A80 dtsi.

Since there is only one possible pinmux setting for RSB, just
set it in the dtsi.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm/boot/dts/sun9i-a80.dtsi | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 80777a33ee78..dc666c69f6ab 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -900,6 +900,27 @@
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
+
+			r_rsb_pins: r_rsb {
+				allwinner,pins = "PN0", "PN1";
+				allwinner,function = "s_rsb";
+				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+		};
+
+		r_rsb: i2c at 08003400 {
+			compatible = "allwinner,sun8i-a23-rsb";
+			reg = <0x08003400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apbs_gates 3>;
+			clock-frequency = <3000000>;
+			resets = <&apbs_rst 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_rsb_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 	};
 };
-- 
2.6.2

  parent reply	other threads:[~2015-12-01  5:47 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-01  5:47 [PATCH 0/7] ARM: sun9i: R_PIO, IR receiver and RSB support Chen-Yu Tsai
2015-12-01  5:47 ` Chen-Yu Tsai
2015-12-01  5:47 ` Chen-Yu Tsai
     [not found] ` <1448948845-28347-1-git-send-email-wens-jdAy2FN1RRM@public.gmane.org>
2015-12-01  5:47   ` [PATCH 1/7] pinctrl: sunxi: Add A80 special pin controller Chen-Yu Tsai
2015-12-01  5:47     ` Chen-Yu Tsai
2015-12-01  5:47     ` Chen-Yu Tsai
     [not found]     ` <1448948845-28347-2-git-send-email-wens-jdAy2FN1RRM@public.gmane.org>
2015-12-04 14:39       ` Rob Herring
2015-12-04 14:39         ` Rob Herring
2015-12-04 14:39         ` Rob Herring
2015-12-01  5:47   ` [PATCH 2/7] ARM: dts: sun9i: Add A80 R_PIO pin controller device node Chen-Yu Tsai
2015-12-01  5:47     ` Chen-Yu Tsai
2015-12-01  5:47     ` Chen-Yu Tsai
     [not found]     ` <1448948845-28347-3-git-send-email-wens-jdAy2FN1RRM@public.gmane.org>
2015-12-01 13:08       ` Maxime Ripard
2015-12-01 13:08         ` Maxime Ripard
2015-12-01 13:08         ` Maxime Ripard
2015-12-01  5:47   ` [PATCH 3/7] ARM: dts: sun9i: optimus: Enable LED3 Chen-Yu Tsai
2015-12-01  5:47     ` Chen-Yu Tsai
2015-12-01  5:47     ` Chen-Yu Tsai
     [not found]     ` <1448948845-28347-4-git-send-email-wens-jdAy2FN1RRM@public.gmane.org>
2015-12-01 13:09       ` Maxime Ripard
2015-12-01 13:09         ` Maxime Ripard
2015-12-01 13:09         ` Maxime Ripard
2015-12-01  5:47   ` [PATCH 4/7] ARM: dts: sun9i: Add consumer IR receiver device node and pinmux settings Chen-Yu Tsai
2015-12-01  5:47     ` Chen-Yu Tsai
2015-12-01  5:47     ` Chen-Yu Tsai
2015-12-01 13:09     ` Maxime Ripard
2015-12-01 13:09       ` Maxime Ripard
2015-12-01  5:47   ` [PATCH 5/7] ARM: dts: sun9i: optimus: Enable consumer IR receiver Chen-Yu Tsai
2015-12-01  5:47     ` Chen-Yu Tsai
2015-12-01  5:47     ` Chen-Yu Tsai
     [not found]     ` <1448948845-28347-6-git-send-email-wens-jdAy2FN1RRM@public.gmane.org>
2015-12-01 13:09       ` Maxime Ripard
2015-12-01 13:09         ` Maxime Ripard
2015-12-01 13:09         ` Maxime Ripard
2015-12-01  5:47   ` Chen-Yu Tsai [this message]
2015-12-01  5:47     ` [PATCH 6/7] ARM: dts: sun9i: Add Reduced Serial Bus controller device node to A80 dtsi Chen-Yu Tsai
2015-12-01  5:47     ` Chen-Yu Tsai
     [not found]     ` <1448948845-28347-7-git-send-email-wens-jdAy2FN1RRM@public.gmane.org>
2015-12-01 13:10       ` Maxime Ripard
2015-12-01 13:10         ` Maxime Ripard
2015-12-01 13:10         ` Maxime Ripard
2015-12-01  5:47   ` [PATCH 7/7] ARM: dts: sun9i: optimus: Enable Reduced Serial Bus controller Chen-Yu Tsai
2015-12-01  5:47     ` Chen-Yu Tsai
2015-12-01  5:47     ` Chen-Yu Tsai
     [not found]     ` <1448948845-28347-8-git-send-email-wens-jdAy2FN1RRM@public.gmane.org>
2015-12-01 13:10       ` Maxime Ripard
2015-12-01 13:10         ` Maxime Ripard
2015-12-01 13:10         ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1448948845-28347-7-git-send-email-wens@csie.org \
    --to=wens-jday2fn1rrm@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
    --cc=linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
    --cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.